I recently came across an old Epson DX5000 Printer/Scanner which works fine via USB.
It also had a Netgear PS121v2 USB Print Server attached - http://kb.netgear.com/app/products/model/a_id/2517
Instructions for Windows set-up are given at the above link - how do I do this in Ubuntu 10.04?
I have a Netgear DGN2000 Wireless-N ADSL2 Router and I'm hoping I can access the Epson Printer from other PCs on my local wireless network.
I have an HP PSC2110 that is connected to a Linksys WPSM54G wireless print server. Printing works great, no issues what so ever. I am wondering if anyone has been able to configure the scanner to work that way as well. If I connect the PSC2210 to my laptop via USB, XSane sees the scanner and works perfectly. I am trying to figure out if there is a way for XSane to see the scanner through the Linksys PS?
Karmic 9.1 64 bit
Toshiba Satellite L455
Linksys WPSM54G ver 1.1
HP PSC2110
Not sure what else I should list.
I just setup a Ubuntu CUPS print server. However when I I try to browse to it, it tells me that I do not have permission to do so and does not let me see the printers or any shared folders.
View 5 Replies View RelatedJust installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies View RelatedI am using Ubuntu 10.04. In the summer a few months back, I managed to get my ancient HP Laserjet 6L printer working via a wired D-Link-DPR 1061 print server and Netgear network switch. This was even though it was not on the print server's compatibility list. A couple of months later it stopped printing and I have not been able to get it going again since.
The print server has one parallel port (used by the 6L) and a couple of USB ports which I don't use.
I have been going through the Ubuntu add printer wizard. The print server can connect via an IP address. I am using its device URI: lpd://ip address/dlk-portname
I have tried all 5 HP laserjet 6L drivers that come with Ubuntu without success. I have the foomatic/ljet4 [en] currently selected. When I try to print a test page nothing is printed and when I do a print self test I get this message:
CUPS SERVER ERROR There was an error during the CUPS operation: 'client-error-document-format-not-supported'.
By, the way I also have a Windows 7 PC and managed to get the 6L working with same print server using the XP drivers, but every so often it stops working. A reinstall gets it going again.
I am having FC11 with an HP prineter attached my firewall is disabled I trying to print from my laptops after I have setup samba and shared the printer , It was working fine when I was installing FC4 and FC5 I am not sure what is missing when I tried to print from the XP box I got "Test pge failed to print" error what I have really noticed in the xp and vista box is that when I go to the printer settings inside control panel , pressing the ports tab and checking to what port I am printing I see that the port "\samba-serverprinter" is not created there this is the log
[code]...
I have Rechat FC4 with CUPS 1.45 and a Dlink DS-802 Print Server.
I have installed CUPS, and pointed it at the DS-802,
but no joy.
Windows already prints to the 802 via a W2k3 server, so that works fine. FC4 with CUPS seems to point at the 802 but print jobs from localhost (just go to the print queue, and there they stay.
Windows continues to function fine, but linux wont send to the 802. Also, if Windows users try to print to the CUPS shared printer, it shows "No Accesss".
I just recently bought a WinStar USB LPR Network Print Server so that I could connect my printer to my network so all the machines on my network could print, and everything would be OS independent. The problem I'm having is that I can't get CUPS to connect to the printer. It either never prints anything, saying that the printer is not connected, or saying that LPR is spooling the job, but it never completes. I've been configuring it as a network printer in CUPS, and trying all the different configuration options to no avail. The print server is located on http://192.168.1.103 and is pingable. The print server I have is this one:
WinStars Networking USB LPR Print Server
What is the correct way to set up a print server like this so I can print to it?
I have got an old print server Axis 150. It does not support TCP/IP I know that there was a thread about this print server [URL].... but I didn't found answer to "how to bring it up" there.
View 5 Replies View RelatedI just received a 2 tb drive for my server to be. The pc is a P4 3.06 ghz with 4 gb of ram. I have found a number of posts on this forum, as well as on the net in general, about setting up a file/print server at home. What I want to be able to do is to access my server through the internet from my office computer (windows 2000) How can I do that? I have not yet spent much time trying to decide which distro I will use. It seems that a number of them are suitable for this purpose, so I just plan to try several from a live cd and then choose one.
View 1 Replies View RelatedI have a local network of two computers running ubuntu connected via a Netgear FR114P. I also have one of the computers connected WiFi to the internet. Can I get on the internet from the alternate computer via the network? Some assistance is appreciated as I am a relative newcomer to this area.
View 2 Replies View RelatedI'm new to setting up Linux Servers. I've setup a Ubuntu 10.10 Server along with CUPS and I'm using Webmin to talk to the server. I have a HP PSC 1315 Multifunction printer connected via usb to the server. Using the CUPS web interface I am able to get the server to detect the connected printer and it identified the HP PSC 1310 Series drivers.
When I printer a test page from the server's screen the print job goes through ok and the size was about 5k.
I then setup a samba share to allow my Windows 7 machine to share the printer. Windows 7 is able to pick up the shared printer correctly and I used the default HP 1310 Series drivers. When I tried to send a test page to the printer, that single page ended up being 3887kb and I also tried printing out a single paged word document which ended up being over 7MB.
I'm trying to set up a cups print server on 10.10 server. When I run
Code:
sudo apt-get install cupsys
i get this error
Code:
E: Unable to locate package cupsys
I can find and install all kinds of other stuff and this is a fresh install.
Here's my /etc/apt/sources.list
Code:
#deb cdrom:[Ubuntu-Server 10.10 _Maverick Meerkat_ - Release i386 (20101007)]/ maverick main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
# newer versions of the distribution.
[Code]....
Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.
I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View Related2 dot matrix printers2 zebra barcode printers1 epson laser printerto my print server via usb and they are recognized as /dev/usb/lp*but everytime the identifications are changing.the first connected printer goes as lp0 and the one after lp1... i want to fix every printer to a unique name or lp id. like
2 dot matrix printers - lp0 and lp1
2 zebra barcode printers - lp2 and lp3
1 epson laser printer - lp4
[code]....
I have an old clunker box with no HD insalled in it. it does have a cd rom however, and i would be able to run DSL from it with that alone.
i want to set this box up as a print server, since as it is all of the computers in the house must actually be moved to the printer and connected to it via USB to print.
i am looking to simplify this for everyones benefit, here.
the box i am going to use will *not* be connected to a monitor, KB or mouse once it is ready to be left on its own. i will use these to set it up, but after that, id prefer a way to http: into it or FTP into it.
i am on ubuntu, the rest of the house is on XP. i figure i will have to configure the computer with SAMBA in order to set it up for sharing, is that correct?
i will be connecting the computer to the wireless router.
basically, id just like help with a roadmap on what needs to be done to set this up. i dont need step by step directions on everything, just an idea of where to start. id really like to get this setup within a few hours.
I have a file server with ubuntu 9.10 on it already working. I want to add print server capability to it. This would be with a Lexmark z705.
View 1 Replies View RelatedI recently updated my server from 9.04 to 10.04.1Previously, my two macs running snow leopard were able to connect to the server and print with no problem. Now they won't print. I can print a test page through CUPS web interface and my Ubuntu 10.04.1 laptop will print to the server.I noticed a difference in Gutenprint that went from v5.2.3 to v5.2.5. At least that was the difference I saw between what the CUPS web interface was showing and what driver I had to choose from when adding a printer on the mac said. I updated the gutenprint drivers to 5.2.5 on the mac.I've uninstalled CUPS 1.4.3, reinstalled it, deleted the printer, added it again.This is the error I get in the mac when I try to print:Tree connect failed (NT_STATUS_BAD_NETWORK_NAME)The print job says its printing, never does, and eventually shows its paused
View 8 Replies View RelatedI initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
I have an old desktop that I'm trying to set up as a home backup/print server. Backup was trivial, but am having issues getting the printing to work. The printer is connected to the server running Ubuntu Server 9.10 (no gui). If I access the printer via http://hostname:631/printers/, I am able to print a test page, so I know the printer is working; however, I am having no luck from Windows. Windows can see the printer when browsed via hostname, but I am unable to connect. Windows says "Windows cannot connect to the printer" without indicating why.
From /etc/samba/smb.conf:
[global]
workgroup = WORKGROUP
dns proxy = no
security = user
[Code]...
a newbe one, but its if my fifth try in using ubuntu for working with Architecture, so... my problem is...I have a plotter (xerox 2230ij) connected in a print server, i tryed to connect in lpt1 port and was sucessful with HP 750 plus driver... so.. yay! but my original intend is to connect in print server and all the computers (windows/ubuntu) use that.But when i connect in PS, i cant see the plotter, but i can acess the PS (Dlink)so.. what i have to do, to make thing working well? and i have virtualbox with windows XP, can XP acess that plotter as well?here a small scheme of my connections...
Code:
router -----------------------------------
| |
[code]...
I recently installed Ubuntu 10.04.2 Server on a small desktop to use as a print server. During installation I marked the sSH, Print, and Samba services.I can ssh into it just fine and that's how I'm configuring it. I have a hp Deskjet F2210 connected to it.My end goal is to be able to use the scanner from my *buntu desktop and from a desktop running XP. All of these being connected via ethernet router.
View 9 Replies View RelatedI'm using Ubuntu 9.10 on a home network (without internet access)Occasionally I need to restart the print server. Code: xterm -e 'sudo /etc/init.d/samba restart' each time it asks for the password but because this is a closed network, I'd like to dispense with it asking for the user password each time
View 3 Replies View RelatedI have found it difficult to research a wireless print server which will be supported on Linux. I use Debian 6 and Ubuntu 10.04 (also Windows 7 64 bit, Vista, and MACOS Snow Leopard). Everyone in my household using uses a different OS, so it is all the more difficult to ensure interoperability across so many OSs. Where can I find a definitive, authoritative and complete list of supported print servers? Also, I want to keep things simple as possible. This is an important criterion for my choice of wireless print server.
GUI mediated setup/install is much preferred over complex configuration files and command line. I know of CUPs, but I don't know if CUPs will regulate the wireless print server and what's involved. The print server is to enable sharing of Brother HL-4050CDN printer. I'm seriously considering F5L049au (see Belkin : Home Base). But the customer support people tell me it does not support Linux. But this is true of the majority of the print server market. Must support N network standard, the printer above, be wireless, and be Linux compatible.
I have Ubuntu 10.04 with no printer. I would like to send my files from Ubuntu to my Mac so I can print them there, since only my Mac has a printer attached. How do i go about it?
View 1 Replies View RelatedI'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies View RelatedNot sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View RelatedI come here to seek your help in my quest to build a simple print server. You see, I have an old R31 Thinkpad and I want to hook up two Samsung printers to it. That is, I want to be able to share the aforementioned printers between Macs and PCs alike on my petty home network. I've had some success with Ubuntu server, but I find it to be a bit unstable and somewhat heavy. Could anyone recommend a distro or better yet a process by which I can set up this home server?
The IBM R31:
Processor:Intel Celeron 1.13 GHz
Cache Memory:256 KB - L2 cache - Advanced Transfer Cache
RAM: 128 MB - SDRAM - 133 MHz - PC133
Hard Drive: 20 GB
[code]....