Debian Installation :: No Ethernet Card Detected

Jul 28, 2015

I am installing Linux for the first time right now and I am facing a bit of an issue when it comes to network hardware driver installation. The NIC on my motherboard is a Marvel 88E1111 (computer is very old). During the installation of Debian, I got to a menu which read "No Ethernet card detected. If you know the name of the driver needed by your Ethernet card you can select it from the list", then provides me with said list of driver names.

However, the only driver I could find that came close the NIC I am using was one called just "Marvel", and selecting actually didn't do anything (screen flashes blue and returns me to the same menu). So I continued by selecting the "none of the above" option, and now the new menu reads: "A driver for your hardware is not available. You may need to load drivers from removable media (...)". So I thought I should google for the drivers and see what I can find. The official site of the company that made my NIC doesn't even list my model in their drivers' list (to be expected since it is so old).

Then I found this: URL.., but I was expecting more of a download than the source code itself.

View 2 Replies


ADVERTISEMENT

General :: Ethernet Card Not Getting Detected?

Feb 22, 2011

I have installed fedora core 8 on my system. But i am unable to use LAN connection. here are the results of some of the commands which give error messages

[root@localhost ~]# lspci | grep -i ether
00:19.0 Ethernet controller: Intel Corporation Unknown device 10f5 (rev 03)
[root@localhost ~]# uname -a

[code]....

View 11 Replies View Related

Fedora Hardware :: Ethernet Card Not Detected In 14?

May 31, 2011

i have newly bought Desktop system with the following configuration:

1)intel DH67vr mother board with i7 microprocessor inserted
2)1000Gb hdd
3)Dvd Drive
4)Nvidia graphics card -1Gb

i successfully installed Fedora 14 in that machine.though the mother board has inbuilt LAN port,it is not detected by fedora14.

View 4 Replies View Related

Ubuntu Networking :: Ethernet Card Not Getting Detected

Dec 3, 2010

I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..

View 2 Replies View Related

General :: Ethernet Card Is Not Detected On System RHEL 5.1?

Jun 21, 2010

I install RHEL 5.1 on my system. But my Ethernet card is not detected. I found my Ethernet card is of "ATTANSIC Technology corp L1 Gigabit Ethernet Adapter(rev b0). I already downloaded the driver. Someone tell me step by step process, how to install this driver over RHEL 5.1.

View 2 Replies View Related

Ubuntu Networking :: On-board Ethernet Port Not Detected - Have To Use PCI Card?

Jul 21, 2011

I'm running an ubuntu maverick server, and I'm having a slight problem with networking. I've only got one ethernet line running into my room, and I've got loads of computers. The server has 2 ethernet ports, one integrated into the motherboard, one on a PCI card that I took from my old server. The on board ethernet never worked on my old server- but I only tried it out post-install, it was hooked up to the card during install (For the record, networking on linux has *never* worked for me if I installed then plugged in the networking stuff after the fact). So I just used the card instead. Transferred the hard drive into a new machine, and lo and behold, it would only work after I transferred in the card from the old one. What I wanted to set up is a basic NAT system, where the network connection is routed through from my server to my main desktop- but when I run ifconfig, my card is not detected, just lo and eth0. How can I fix this?

View 3 Replies View Related

General :: NVidia Nforce Ethernet Card Not Detected In RHEL 5

Jun 8, 2010

I use an nVidia nforce MCP73 ethernet card on Red Hat Enterprise Linux. It is not getting detected and hence I'm unable to configure my network.

View 14 Replies View Related

Red Hat / Fedora :: Ethernet Card Not Detected In Red Hat 5.3 In Dell Inspiron 1525 Laptop

Jun 14, 2010

i have installed red hat 5.1 on my dell inspiron 1525 laptop.It is not detecting any ethernet card.driver is marvel yukon 88E8040So far i found this package to be installed kmod-sk98lin-PAE-10.70.7.3-2.el5.elrepo.i686.rpm but it is showing me the dependencies problems..

View 4 Replies View Related

CentOS 5 Networking :: NVidia Corporation MCP79 Ethernet Card Not Detected In MAC Mini?

Feb 26, 2010

I have installed trixbox 2.8.0.3 in Intel MAC mini PC, installation completed successfully. After reboot network card was not detected.

My MAC mini PC comes with nVidia Corporation MCP79 Ethernet card. how to enable Ethernet card with out affecting the tribox. trixbox-2.8.0.3 version comes with Cent OS 5.4. [Moderator edit: s/deducted/detected/]

View 5 Replies View Related

Debian Installation :: CD Cannot Find Ethernet Card?

Aug 27, 2011

I'v just brought a notebook computer with a CPU i7 2630QM. I install debian 6.0.2.1 via CD driver, but it failed to success. The probles are three, (1).it reported "cannot find ethernet card" ; (2). It reported "cannot install continue" after the diskpartion step have been successed; (3). It said "netinstall may be a choice", so I say "Yes" and It really downloading something (543 files) and successed . After reboot, I loggin and cannot link to the internet. There is no such files ralated to netware config and I'm not able to config that, for I'm always only a bar finder in an meau.(shy a little,but this is ture). I do it 4 times and the situation and results are the same that I got a smallest netinstalled debian system on my computer and I cannot play music, cannot link to internet. I wonder: How could I install a real debian on my computer? Need I download anther version of iso file or do something that I do not know to makes it works. I can burn an iso image to a real CD by my old computer. I can also install OS such as mint via USB flash drive. In the computer Highly-Orangized world (already-wisdomed world), I have a body already but I've never been installed a sprit or a soul. So I really need to learn from you, from the great debian bbs, learn something of vital importance to take me into wise and freedom.

View 8 Replies View Related

Debian Installation :: Didn't Recognize Ethernet Card

Sep 15, 2010

I am a rookie to both Debian and Linux. There is a need of Debian so I just started my experience with the Linux system.

I have installed the Debian squeeze testing version and since when I installed the system it didn't recognize my ethernet card, I could only install what is in the installation CD1. Now I have a nice looking Debian system but very simple with a lot of necessary packages or whatever missing (I don't even have the update manager). Is there some way that I could launch an automatic installation of content in the rest CDs from internet?

View 3 Replies View Related

Debian Installation :: Can't Get Pci Express Ethernet Card To Work

Dec 22, 2010

I have an HP Pavillion Elite HPE computer I just got for a server. It has an internal gigabyte on the mother board and I put in one pci express trendnet teg-ectx eternet card in before installing. It is using the realtek 8169 chip. I had the local network on this card and the pubic static ip on the built in ethernet port eth0. After the intstall of debian 5.07 32 bit I couldn't get the eth0 pubic access to work. I can't get into the server with sftp or ssh and openssh has been installed and I can get into it locally on the local network.

I then installed a second ethernet card the same as the local network card. Now the pubic is on the which is eth1 and the local is eth2. I can ping out to [URL] but I can't get into the server on the eth1 using ssh and I have a iptables firewall and I turned it off and I stll can't get in. I am thinking that the eth1 card I added after the install doesn't have the driver or something. nothing is hooked up to eth0 right now.

[code]....

View 3 Replies View Related

Debian Installation :: WiFi Card Not Being Detected In Live CD

May 15, 2015

I'm was trying to choose between GNOME and KDE for version 8. However both the live DVD's fail to pick up the Wifi card on my system. I am also unable to use certain basic commands such as ifconfig on the live CD. I am completely new to Linux and Debian (of course). Pardon me for the hand holding. This will be my first install of a Linux system.

What steps I can take to ensure that the Wifi card and the network card will be supported - hardware compatibility test maybe? Is there a way to try before installing? This will be a dualboot with Windows 8.1

Wifi card: Ralink RT3290 802.11bgn Wi-Fi Adapter
LAN card: Realtek PCIe GBE Family Controller

View 9 Replies View Related

Debian Installation :: Emachines G725: Ethernet Card Not Recognized

Mar 4, 2010

i can't install debian 5 in my emachines G725 notebook, the ethernet card is not recognized, it's name: Atheros AR8132 PCI-E Fast Ethernet Controller .

View 2 Replies View Related

Debian Installation :: Installer Doesn't Detect Ethernet Card

Dec 19, 2010

I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?

View 14 Replies View Related

Ubuntu Installation :: Ethernet Adapters Detected But Disabled?

Mar 6, 2011

I'm trying to install a second NIC on a computer running 10.10 x64 server edition, but am having a bit of trouble and hoping someone can help. I got a used gigabit PCIe ethernet adapter and hooked it up, but it didn't display when I ran ifconfig, so I assumed that it was broken. However, when I plugged in a known working 10/100 adapter from another machine it also wasn't configured.

I then did a bit of investigating and found that both cards ARE detected, but are unable to work for an unknown reason. Here's the output of "sudo lspci | grep -r Ethernet"

00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 01:07.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) 02:00.0 Ethernet controller: D-Link System Inc DGE-560T PCI Express Gigabit Ethernet Adapter (rev 11) The bridge is the working onboard NIC, and the others are the ones that I'm trying to get to work. This also might help diagnose the problem:

sudo lshw -C network
Code:
*-network DISABLED
description: Ethernet interface
product: NC100 Network Everywhere Fast Ethernet 10/100
vendor: ADMtek

[Code]...

View 6 Replies View Related

Hardware :: Ethernet Not Detected: Debian Lenny On Dell Latitude D600 Laptop

Mar 18, 2011

Ethernet is not detected with the following setup:

OS: Debian Lenny
Laptop: Dell Latitude D600
Ethernet adapter: Broadcom 57xx Gigabit Integrated Controller
Wifi adapter: Broadcom BCM4309 802.11a/b/g

Have done the following troubleshooting suggestions from around the www:

LAN controller is enabled in BIOS
dmesg | grep eth0 returns nothing
lspci -v | grep -i net shows wifi adapter but no ethernet adapter
ifconfig -a does not show eth0
ifconfig eth0 up confirms ERROR while getting interface flags: No such device
Have done lsmod, but not sure what I should be looking for.

I would post lspci, dmesg or any other output, but as the adapter is not being detected, I have no network/internet connection from that laptop, have only one other Windows based (at this stage) laptop that I am using to write this message, and so would have to type out the output manually.Adapter indicators are both on when laptop is powered up. Am unsure if the ethernet adapter has somehow gone to sleep, and if so, unsure how to wake it.Perhaps the ethernet adapter is defective, but am hoping to confirm this before looking for a workaround/replacement.

View 14 Replies View Related

Fedora Installation :: Ethernet NIC Detected But Wired Network Disconnected

Mar 31, 2011

I'm stuck after a clean install of FC14 on an old Everex StepNote (Doing this for a friend). I tried Ubuntu on it first (because it's so easy) but had horrible stability issues and terminal commands wouldn't respond - however Ubuntu detected and ran the eth0 port just fine. FC14 detects my ethernet NIC, but it won't work.

Here are my details.
lspci outputs this for my NIC:
00:12:0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)

Here is what I have tried so far - with no luck:
- I have toggled the networking switch on the laptop and had no luck.
- Downloaded Via's VT6102 drivers for Fedora Core, but they don't support kernel 2.6.35.*
- Run ifconfig to manually assign an IP address - which it DID take and did route add default gw as well.
- Did a ifconfig eth0 down and up as well.

After all that, I still have a "disconnected" wired connection (and yes, I did check the cable - it works just fine in my personal machine.

View 5 Replies View Related

Debian Configuration :: Squeeze No Detect Ethernet Card

Aug 17, 2010

i install devian squeeze with the netinstall iso, all work fine except for the auto-detect of my ethernet card.i have a mother asrock p4i45gv with an onboard ethernet card realtek rtl8139/810x family fast ethernet NIC.i try everithing, the ifconfig shows only lo, but ifconfig -a shows a eth0 any ideas?

View 12 Replies View Related

Debian Hardware :: Unable To Browse Web Using Ethernet Card

Jan 19, 2016

Just turned on my computer after being away for a month and I am unable to browse the web when connected using my ethernet card.Skype is able to work fine and I am able to ping my router yet both Iceweasel and Chrome are unable to connect to any websites. Apt-get did not work as well, and Chrome states that there is an error with the DNS lookup, which lead me to try:

# /etc/init.d/nscd restart

yet it didn't work. I am able to browse the web normally when connected using the wireless card.

View 5 Replies View Related

Debian Hardware :: Connecting To Device With Ethernet Card

Mar 18, 2011

I just did a fresh install of Squeeze with a KDE desktop on my computer. I use this computer to run an instrument in my lab. The instrument is connected to my computer through an ethernet card. Since my reinstall I cannot figure out how to get my computer and instrument communicating again. I'm guessing that I need to somehow tell my computer to connect to the device, but I don't know how. Here is my interface configuration:

[Code].....

I think my instrument is connected to eth2, which does not show any inet addr or Bcast ip, so I'm guessing that is a problem. How do I fix this?

View 9 Replies View Related

Debian :: Wireless Card Not Being Detected On Fresh Install?

Jan 9, 2011

i just installed debian after about 2 weeks of using ubuntu afterriend suggested switching, and it's not detecting my wireless card in the network settings. i'm new at linux so try to keep it simple if you can please,i read the sticky about this and here's the info it said i should provide

ispci -knn Code: 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Kernel driver in use: agpgart-intel

[code]...

View 1 Replies View Related

Debian Configuration :: Ethernet Card And DSL Modem - Internet Setup?

Feb 13, 2010

I am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?

View 5 Replies View Related

Debian :: How To Check The Ethernet - Wireless Chipset And Video Card

Nov 5, 2010

Out of curiosity, in linux, how do we check:

- The make/type of ethernet card

- The wireless chipset

- The video card

Used in a computer?

View 3 Replies View Related

Ubuntu :: Share Internet From 1st Ethernet AND To 2nd Ethernet And Wifi Card?

Feb 8, 2011

I am basically wanting to use my Ubuntu 10.10 computer as a router. Note: Before you say just get a router please note that I am poor/cheap. I have two ethernet connections and one wireless connection on my netbook. I want to share the internet connection that is going into one of the ethernet cards through the other ethernet card and the wireless card.

DSL-->1sr Eth --> 2nd Eth (currently works)
DSL-->1sr Eth --> Wireless Card (Adhoc) <--(connects with limited connectivity AKA no internet)

The 2nd Ethernet card already has working internet, but when I connect to the Wireless card (through an Adhoc network), it cannot get an IP (I believe).

View 2 Replies View Related

Debian Hardware :: SD Card Not Detected Unless Inserted At Boot Time

Sep 18, 2013

My desktop is a Dell XPS 630i. It has a SD card reader on the front panel.

It used to work until about a few months ago (I guess, I don't use it that often). Now, the SD card is undetected when inserted.

If inserted before boot, then the existing partitions are available in thunar. I can remove and insert back the card in the reader without it being detected. I can mount and unmount the partitions. But if I "eject" the partition, then the card is not detected anymore even if pulled out and pushed in again.

Not much in dmesg (the drive is /dev/sde, and there are two partitions in the card, it is a raspian OS) :

Code: Select all[  542.144424] sd 6:0:0:3: [sde] No Caching mode page present
[  542.144430] sd 6:0:0:3: [sde] Assuming drive cache: write through
[  542.159299] sd 6:0:0:3: [sde] No Caching mode page present
[  542.159303] sd 6:0:0:3: [sde] Assuming drive cache: write through
[  542.161556]  sde: sde1 sde2

[Code] ....

When I click "eject" or manually remove the card, it says "capacity change from 2013265920 to 0".

I'm using Jessie, with the latest 3.11 kernel from experimental, but the issue was there with 3.10 and most probably older kernels. I tried to go back in time using older kernels (down to 2.6, I think the reader worked at that time) without succes, which may indicate it does not depend only on the kernel.

I don't have any "power saving" setting in the BIOS I could disable. And I didn't modify the BIOS, even the BIOS settings, in the last months.

I'm pretty sure it is a software issue as it worked with a knoppix 7-something.

Code: Select allecho 1 > /sys/bus/pci/rescan

command I've read about does not seem to work. It is supposed to force the detection but nothing in dmesg and no volume available in thunar.

I found a workaround yesterday. If I launch gparted (needs admin privileges), the SD card is detected. Like if it forced the detection. Sometimes, I have to specify the path explicitely to get it to appear :

Code: Select allgparted /dev/sde

Besides, I'd like to have this bug fixed, but I don't know against which package I could file a bug. Could it be some misconfiguration on my side ?

View 14 Replies View Related

Debian Configuration :: Ethernet Card Missing/Compile Latest Kernel?

Dec 17, 2010

This may sound ridiculous, but after installing Debian 5 (from CD 1) in my laptop, ASUS UL80VT, it fails to detect the Ethernet device. The device is "Atheros AR8131 PCI-E Ethernet Controller". I guess the problem comes with the old kernel of version 5. I was intending to compile the latest kernel anyway. But the problem is is there any heads up i need to download the kernel and trying to compile it? Is there anyone who uses Debian on UL80VT. If there is, does it works okay?In short I want to compile the latest kernel, hoping it will fix the Ethernet device. There are installers available with the latest kernel. But I want to do it on my own.

View 4 Replies View Related

Debian Hardware :: Ethernet Card Intel I217-LM Not Recognized By Wheezy

Mar 7, 2014

I tried to install the latest stable version of Debian (download yesterday : Debian Wheezy 7.4.0) on my new computer Fujitsu Celsius W530.The version installed is exactly this one (given by the commande "uname -a") :

PCNAME 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
=> A Debian Wheezy 64 bit

I have a problem with the Intel ethernet card : I217-LM (the model was verified on the Fujitsu specifications and also on the Windows 8 I use on another partition).During the install procedure, Debian did not find the ethernet card.I continued the install without it and after I tried to make it found.I got a Linux driver in the Intel Web Site but I saw after that Debian loaded yet this driver (e1000e), so I did not install the driver from Intel (I needed to get linux-headers and to compil the files).

So when I force the system to load the driver, it gives no error but the device is still not found when I try to bringup the network interface.URL...

- understand why I see the Device (with "lspci" command) and the module "e1000e" (I tried also the "e1000" one) loaded with "lsmod" command ?
- make the card work to allow my debian for connecting to internet ?

Here some commands which can show you the problem :
Code: Select all~# lsmod | grep e1000
e1000e                120822  0
root@PC-DEV-JB-debian:~# ll /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko
-rw-r--r-- 1 root root 184K févr.  2 02:04 /lib/modules/3.2.0-4-amd64/kernel/drivers/net/ethernet/intel/e1000e/e1000e.ko

[code]....

View 5 Replies View Related

Ubuntu Installation :: Video Card Not Detected?

Feb 6, 2010

Working on a friend's PC, which was previously running XP and got a very nasty virus infection. I convinced him to try Ubuntu, showed him the interface running on my own machine and he was hooked. Backed up all his data to network, completely erased the hard disk and install Ubuntu. Sounds easy, right?

Installed 9.10, it didn't detect the video card and xorg.conf was missing from /etc/X11. After some messing around trying to get it to work, I realised that the sudo dpkg-reconfigure -phigh xserver-xorg command wasn't working properly and didn't produce the menu shown in the screenshots. After some digging I found that this was a bug in 9.10, so to make the job easier, I wiped the drive again and started again on 9.04.

With 9.04, at least the xorg.conf file was there, but had no entries under configured video device. I tried adding "vesa", "via", "openchrome" (all on separate attempts), all to no avail. I retried the dpkg -reconfigure command above. still no menu.

Now several days into this "easy" install, I rolled back to the LTS release (8.04 - hardy) and installed that instead. Still no video card detection, and resolution is obstinately stuck at 800x600. Tried the same string of tests again, and now admitting defeat The relevant output from lspci is: 01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01)

The output from xrandr is:
Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600
default connected 800x600+0+0 0mm x 0mm
800x600 60.0* 56.0
640x480 60.0

[Code]...

View 6 Replies View Related

Fedora Networking :: WiFi Card Not Detected In New Installation Of 14?

Dec 17, 2010

I have just installed Fedora 14 on my desktop machine and have just discovered that it can't detect my WiFi card. The card is an Edimax EW-7711In which the makers say will run with Linux. I know that the card works fine with Ubuntu because my brother uses the same card in his Ubuntu machine but he is away until after Christmas so I don't know what he did to make it work other than I know he used ndiswrapper and the Windows drivers that were supplied with the card. I have looked for ndiswrapper in the Fedora repositories but it doesn't appear to be there.

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved