Networking :: No Wireless After Installing More Drivers?
Dec 27, 2008
I am using a thinkpad R61 and wireless is okay a livecd. Installed ubuntu 8.10 onto a 8Gb thumbdrive and the wireless is still working perfectly. Hoping to make this thumbdrive be truely portable to any laptop, I started download more wireless drivers (e.g. for rt2570, rt73, broadcom, atheros drivers etc) After installing all those wireless drivers, rebooted and noticed that ubuntu does not activate my wireless at all. (the wireless led on my thinkpad does not light up).
View 6 Replies
ADVERTISEMENT
Jul 10, 2010
I cannot get my Sabrent USB wireless adapter to work, please help me as I am a beginner in Linux! In their readme, they have two methods:
1.) Compiling a driver from the source code, but they do not give any instructions and I am lost on how to do that.
2.) Copying the firmware files directly to the lib/firmware folders. I did that but when I ran sudo ./wlan0up and sudo .wlan0down, but everything I do results in a "Could not get interface for wlan0"
View 1 Replies
View Related
Jun 29, 2009
I installed Nvidia drivers according to the post in HowTos section. It downloaded a different version of the existing kernel, i guess. And the kernel using which I downloaded, when shows up GUI, looks like a Safe Mode of Windows. So I boot the kernel that it downloaded. And there the problem is that in Network Manager applet, it doesn't show me the wireless connections. It doesn't even show the Enable Wireless checkbox upon right clicking it. How to get it back?
View 4 Replies
View Related
Jan 30, 2010
I installed the b43 drivers to enable the monitor mode for using kismet. but after installing, it shows "Device not Ready".
The dmesg | grep b43 output shows:
[ 86.449430] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[ 146.449335] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw
[ 206.448146] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 206.448153] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 206.448158] b43-phy0 ERROR: You must go to [URL] and download the correct firmware for this driver version. Please carefully read all instructions on this website. How to re-enable my wireless connection.
View 2 Replies
View Related
Feb 13, 2010
I have just installed Ubuntu 9.10 netbook remix for my new laptop. I've tried at great length to install the correct drivers to get my wireless up and running. I'm currently trying to install the Broadcom driver for my 802.11g wireless card. I have downloaded the headers and tools for ubuntu and am proceeding with the instructions given on [URL].
But when I get to these steps I come unstuck
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-portsrc.tar
I can make the directory and open it but when it comes to the third step I get a message saying that there is no such file or directory.
View 8 Replies
View Related
Nov 4, 2010
I have just installed Ubuntu 10.10 on a pc as a duel boot, On the computer I use a belkin surf and share n speed controller to connect wireless ( pc doesn't have a wireless connection) I have found the correct driver RLT8192SU from realtek and unzipped it and moved the contents to a flash drive. The problem is I am a total noob to Linux based systems and i have no ideal how to install the contents, there is a read me file but it makes no sense to me and i have absolutely no clue how to install the driver so i have no internet. Is there an easier way to install or step by step instructions?
View 6 Replies
View Related
Sep 10, 2010
I have installed Ubuntu for netbooks on my four year old laptop and of course the wifi card is unable to search for wireless networks when I'm booted into Ubuntu. I do have the driver software on a recovery disk. Would installing it in Ubuntu fix my problems?
View 4 Replies
View Related
Jan 12, 2011
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies
View Related
Jun 27, 2010
I've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies
View Related
Apr 10, 2009
I am following the instructions to install my AWU254 on debian4.0 and get the following...
cjtrim@debian:~/src/rtl8185_linux_26.1027.0823.2007$ ./makedrv
./ieee80211/
./ieee80211/ieee80211_module.c
./ieee80211/ieee80211_rx.c
[code]....
View 2 Replies
View Related
Nov 10, 2010
I just installed Ubuntu on my Macbook Pro today, and I'm trying to install the drivers.
I ran the command "sudo dmidecode -s system-product-name" and I got "Macbook 6,2"
On [url] it only lists up to Macbook 6,1 so I just went with that.
I'm trying to install the "Brodcom STA wireless driver" However, when I authenticate it and begin the installation, it says: "Sorry, the installation of this driver failed. Please have a look at the log file for details: /var/log/jokey.log"
View 5 Replies
View Related
Aug 9, 2010
I have a DWA-130C (external wireless) and am trying to install the drivers for us in Linux Mint, I'm assuming this is done with ndiswrapper, but I have no idea what I'm doing. I am a begginer to Linux though I know the basics of using the console, packages and such.
View 2 Replies
View Related
Jul 23, 2009
I have Fedora11 running in my machine and it has no LAN port (RJ-45). I have a wireless PCMCIA card.The model of the wireless card is NL-2511CD EXT2(ETSI).When I insert that card to the PCMCIA slot a window pops up and ask for a WEP key. My wireless router is configured with WPA but above pop-up has no WPA option. I suspect my fedora installation does not have the necessary driver for my wireless card.I want to install that driver. I can transfer that file to the machine via thumb drive since it has no network connection yet. How do I install this? Please refer below images as I'm still a newbie at linux.
View 13 Replies
View Related
Oct 21, 2010
I have a old mac G4 and I just recently installed ubuntu 10.10 on it. It doesn't recognize my wireless adapter at all so I get no wireless on the computer. I've never used any linux distribution in my life so I don't have any idea how to install drivers for it.
View 1 Replies
View Related
Mar 31, 2011
My broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies
View Related
Jul 6, 2010
I have a Wireless PCI-Express Adapter which I wish to install the drivers, though am having difficulty. The chipset on my card is a Ralink. I have visited the Ralink Website Ralink corp. and downloaded the RT2860 Wireless Lan Linux Driver version 2.3.0.0. I have extracted the files within my home directory. I have read the readme file, and from what I understand I have needed to do... I have typed in the Make command as a "super user". Unfortunately I have had no success and it states the following output.
[Code]...
View 4 Replies
View Related
Sep 1, 2011
im trying to install the RTL8192CU_linux_v3.0.2164.20110715 drivers so my new wireless adapter works, but I have hit a wall when trying to insert the drivers after makeing them its telling me
"-VGN-NS325J:~/wifi/driver/8188$ insmod 8192cu.ko
insmod: error inserting '8192cu.ko': -1 Operation not permitted
View 5 Replies
View Related
Nov 24, 2010
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
View 2 Replies
View Related
Mar 20, 2010
i installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
View 3 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Aug 3, 2010
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
View 1 Replies
View Related
Dec 31, 2010
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
View 9 Replies
View Related
Mar 16, 2010
I'm about to chuck my Ubuntu Dell Mini Laptop in the trash, have tried everything and read everything, but there seems no easy way to install the wireless drivers.
View 9 Replies
View Related
Dec 23, 2010
When using the b43-pci-bridge driver for my broadcom card I can't get the wireless to work while if I use the wl driver it does. This is the only problem that I have that I can't use the wl because it doesn't allow me to change the mode of the card to monitor where as the b43 is compatible with mode change as well as with aircrack.
This is what lspci -nnk shows:
Code:
06:00.0 Network controller [0280]: Broadcom Corporation BCM43XG [14e4:4329] (rev 01)
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
and neither network manager or iwconfig show blank while using the b43 driver but using the wl they do work....
View 1 Replies
View Related
Dec 31, 2010
i have ubuntu 7.04 and i have wireless driverAtheros Hardware Access Layer (HAL)but i cant get it to work in restricted drivers it's checked as enabled but status is not in use how do i fix this
View 9 Replies
View Related
Dec 5, 2010
I have a Live minimal install Gentoo CD that was made from a downloaded ISO that does not contain the drivers/firmware for my wireless networking card in my laptop. So I unpacked the ISO image and un-squashed the squashfs and added two folders that contained the firmware in the /lib/firmware directory. Then I squashed the file system back the way it was (squashfs), and re-created the ISO again. Then I burned the ISO to an image on a blank CD but when I tried to boot from the new CD, the CD was ignored and the laptop went directly to the hard drive for booting. So the live CD is no longer a bootable CD. I can't even tell if the firmware will work because the CD is not detected at POST. The BIOS is set to boot from a CD before it pages the hard drive. The original CD booted fine before I made the modifications to it. I compared the contents of the original CD to the one I modified and everything is identical. What did I do wrong.
View 3 Replies
View Related
Sep 17, 2010
The fallacy in moving from desktops using PCI (etc) devices which have a history of available wireless and/or wired drivers is simply that one reaches a level of technology in modern laptops wherein drivers used by the devices in those laptops running Win7 are simply difficult to find for Linux OSs.
I purchased a Toshiba L500 (64 bit) which ran Win7 Home Premium; I wiped the HD and installed Windows 32 bit Pro. Runs like a top. Even after I installed Win 7 Pro, I had to search back on the Toshiba site for the wireless and Lan drivers to reinstall. I then installed Fedora 13 which gives me use of Win7 but also Fedora; However, does anyone know where there is a copy of an rpm driver (or for that matter a deb driver) for the following; 1. Atheros AR8152 PCI-E Fast ethernet controller and, 2. the Realtek RTL8191SE Wireless Lan 802.11n PCI-E NIC?
Obviously, without the availability of online status for Linux on Laptops, Linux becomes a useless paperweight and I have a very fast new Win7 Pro machine.
View 1 Replies
View Related
Aug 9, 2011
I'm getting a Dell XPS laptop soon and it comes with Intel Centrino Wireless-N 1030 and I was wondering if anyone else has this chipset and how well supported it is under Fedora or Linux in general.
View 1 Replies
View Related
Apr 19, 2010
i have installed ndiswrapper, and the correct drivers for the wireless card.
Code:
ndiswrapper -l:
bcmwl5a : driver installed
device (14E4:4320) present
I seemed to be having a conflict with the generic drivers which loaded for my wifi device 'b43-pci-bridge' and the ndiswrapper drivers i installed.
So i ran the command 'rmmod ssb' and now my broadcomm wireless device is "unclaimed"
Code:
lshw -C Network:
*-network:0 UNCLAIMED
description: Network controller
product: BCM4306 802.11g Wireless LAN Controller
vendor: Broadcomm Corp.
[Code]...
View 1 Replies
View Related
Apr 30, 2010
Just upgraded to Lucid from Karmic. First thing I notice after restart is that I have no wireless. No big deal, I probably just need to re-install the proprietary drivers. I go to do this, and it gives me an error message, saying that the installation has failed. This has never happened before, and didn't happen when I upgraded from Jaunty to Karmic. I have an HP dv6 1230us and a Broadcom STA card.
I really need the internet to be working, and didn't anticipate that an upgrade, of all things, would screw it up...
View 2 Replies
View Related
