i have ubuntu 7.04 and i have wireless driverAtheros Hardware Access Layer (HAL)but i cant get it to work in restricted drivers it's checked as enabled but status is not in use how do i fix this
View 9 RepliesI've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies View RelatedI recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
i installed ubuntu along side of xp, and i cannot get my wireless to work. the drivers that are installed in xp work great, and i can access the internet, but do not work in ubuntu.
View 3 Replies View RelatedI have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
I am new to fedora linux. I want to know how to install wireless driver for my Dell Wireless Dell Wireless 1397 802.11b/g Half Mini Card. I am using fedora 13. Below is my lspci command outuput.
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 03) .....
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
09:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
With nearly all Linux distributions (Ubuntu, Kubuntu, and Linux Mint being the exceptions), my system never seems to recognize that my laptop even has a wireless card attached to it. That is, when I run "lspci" the wireless card doesn't even show up on the list like it does with Ubuntu/Kubuntu/Mint. This narrows my options when it comes to choosing a distro to install on my computer. I can't seem to find instructions as to how I can make my wireless card work. I assume it needs a driver. I managed to find the driver, I think, in the form of a .tar.gz file. The card is a Realtek Semiconductor, RTL 8191SEvB Wireless Lan Controller (rev 10).
View 1 Replies View RelatedI just recently put Ubuntu 10.04 Lucid Lynx on my laptop with windows dual booting. I'm pretty new to all this stuff, so I'm a bit confused. I followed instructions I read on here, but none of it seems to be working. I put all of the 3 Ndiswrapper things on, and then copied the .inf and .sys files from windows into the same directory. I just want to connect to my home network, which has WEP security.
View 14 Replies View RelatedI installed openSuSE 11.2 sometime ago in a COMPAQ Presario CQ60-419WM laptop (the ones that Wal-mart sold for $300 about a year-and-a-half ago. I installed the 64-bit version because I saw that the processor could support that (perhaps that was not a good idea). I have some problems that seem related to not having the necessary drivers. My wireless has never worked and my display is far from what I would like it to be (the response is slow, if a drag a window, its motion is jerky, if I scroll down in a browser window, the motion is wavy). The look and feel is very different from what I get at work and I do not know how to fix it.
[code]...
Ok, so I am needing some drivers and I've been googling like hell to find em, however, I can never seem to find any. My adapter model is F6D6050v1.
PS: when I try sudo ndisgtk it comes up with command not found.
I'm about to chuck my Ubuntu Dell Mini Laptop in the trash, have tried everything and read everything, but there seems no easy way to install the wireless drivers.
View 9 Replies View RelatedWhen using the b43-pci-bridge driver for my broadcom card I can't get the wireless to work while if I use the wl driver it does. This is the only problem that I have that I can't use the wl because it doesn't allow me to change the mode of the card to monitor where as the b43 is compatible with mode change as well as with aircrack.
This is what lspci -nnk shows:
Code:
06:00.0 Network controller [0280]: Broadcom Corporation BCM43XG [14e4:4329] (rev 01)
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
and neither network manager or iwconfig show blank while using the b43 driver but using the wl they do work....
I'm having a strange problem with my wireless card (I never had troubles with it so I'd be glad if you could help me in making it work again). I have installed the restricted STA driver for my Broadcom BCM4311 wireless card, and apparently the card is recognized, and in fact I can "see" the available wireless networks and connect to my one.
The strange things is that even if I connect to my network I can't navigate. If I link an ethernet cable, start navigating and after disconnect the ethernet and keep using only the wireless, I can navigate without problems.
i have installed ndiswrapper, and the correct drivers for the wireless card.
Code:
ndiswrapper -l:
bcmwl5a : driver installed
device (14E4:4320) present
I seemed to be having a conflict with the generic drivers which loaded for my wifi device 'b43-pci-bridge' and the ndiswrapper drivers i installed.
So i ran the command 'rmmod ssb' and now my broadcomm wireless device is "unclaimed"
Code:
lshw -C Network:
*-network:0 UNCLAIMED
description: Network controller
product: BCM4306 802.11g Wireless LAN Controller
vendor: Broadcomm Corp.
[Code]...
Just upgraded to Lucid from Karmic. First thing I notice after restart is that I have no wireless. No big deal, I probably just need to re-install the proprietary drivers. I go to do this, and it gives me an error message, saying that the installation has failed. This has never happened before, and didn't happen when I upgraded from Jaunty to Karmic. I have an HP dv6 1230us and a Broadcom STA card.
I really need the internet to be working, and didn't anticipate that an upgrade, of all things, would screw it up...
I have just completed a clean install of 10.04 and my wireless is not working.It detected my hardware and installed the drivers. It is activated in the hardware Drivers section and the wireless button light is lit.When I click the connection icon in the panel the wireless has nothing to connect too and says disconnected. The Ethernet connection is working fine.BTW the wireless worked just fine in 9.10.
View 2 Replies View RelatedNo wireless networks can be recognized in Ubuntu, and now after several attempted fixes, my wireless toggle button won't switch from orange to blue. My wireless card is Atheros AR5001. I posted in the absolute beginners forum, but I've played around so much that I think I can move on to this one I'm so sorry if posting another thread is bad etiquette, but I need to have wireless access by Friday morning, and am slightly desperate.
Attempted fixes: First, I installed the backport modules using Synaptic. Then, I installed the madwifi driver. After those failed, I used ndiswrapper to install the Windows driver (linked from the ndiswrapper page). I made sure to disable the madwifi driver and restart first. My output all looks normal--I blacklisted everything mentioned in google searches. Here is the current output of ndiswrapper -l:
Code:
ndiswrapper -l
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in
[code]...
I cannot get my Sabrent USB wireless adapter to work, please help me as I am a beginner in Linux! In their readme, they have two methods:
1.) Compiling a driver from the source code, but they do not give any instructions and I am lost on how to do that.
2.) Copying the firmware files directly to the lib/firmware folders. I did that but when I ran sudo ./wlan0up and sudo .wlan0down, but everything I do results in a "Could not get interface for wlan0"
installing the proprietary Broadcom wireless driver for my desktop computer. I have attached this to a LAN and the proprietary driver doesn't load.
View 1 Replies View RelatedI'm going to install ubuntu on my computer, currently it has windows XP installed.
I'm trying to locate the wireless drivers because I will use them for NDIS wrapper when I have ubuntu installed.
But i'm not sure where I can find them and what the names of the files are.
I installed Maverick earlier today on a Dell XPS M1210, and everything works beautifully, except for one thing: the wireless card. It is an Intel 3945ABG wireless card, and I've tried searching around and have found nothing,
View 7 Replies View RelatedI just re-installed Ubuntu 10.04 and was trying to install the Broadcom STA wireless driver. It worked for me before with no problems, but now when I try to install any proprietary driver (using System >>Administration >>Hardware Drivers) I get an error message that says: "You are not authorized to perform this action". I am the only user and I have administrator privileges, so I do not know why I am getting this.
View 1 Replies View RelatedI am looking to reinstall Ubuntu on my desktop computer, in a dual-boot configuration. The system I am installing to should prove no hassle, but my biggest concern is my wireless card. It's a D-Link DWA-510 wireless card. Checking the D-Link website, they do not seem to have Linux-specific drivers available for that model, so I am wondering if there are compatible drivers available in Ubuntu?
View 4 Replies View RelatedI just recently purchased a Lenovo Thinkpad e520 and I'm wanting to put Ubuntu 11.04 on it. I downloaded the 64bit iso and burned it to a thumb-drive, just before booting the thumb-drive. I have not yet installed Ubuntu, but rather I'm still running it from a thumb-drive. I want to make sure everything will work fine, before installing it permanently.
However, it doesn't appear as if any drivers for my wireless card were loaded, as I can't view the available wireless networks. I successfully installed Ubuntu 11.04 on my desktop several months ago and I haven't booted into Windows since, -not one time. Therefore, I'm hoping to have my new laptop run Ubuntu as well.
I am using a thinkpad R61 and wireless is okay a livecd. Installed ubuntu 8.10 onto a 8Gb thumbdrive and the wireless is still working perfectly. Hoping to make this thumbdrive be truely portable to any laptop, I started download more wireless drivers (e.g. for rt2570, rt73, broadcom, atheros drivers etc) After installing all those wireless drivers, rebooted and noticed that ubuntu does not activate my wireless at all. (the wireless led on my thinkpad does not light up).
View 6 Replies View RelatedI want to switch my laptop from XP to Ubuntu, but right now, i cant risk installing it. i dont want to have it partitioned so i can dual boot, so for now i only run the try-it-out mode.Before i consider installing though, i want to see if i can get everything to work ahead of time, that way im not regreting instalation. I have a Compaq Presario V2000 laptop, with 55GB hard drive and 516MB ram. So far, the trial mode is working great, but the wireless will not work. Ive tried to install the driver, but i am unable to do so. I have looked this up, and i have tried many things, and so far, none have worked.I was wondering if it was just part of the trial thing or not, but it is a Broadcom Wireless BCM4318 driver
View 9 Replies View RelatedI just recently installed and have no clue how to get the drivers for my netopia 3d wireless adaptor to work! all the drivers are for windows! I have never used this OS before.
View 5 Replies View RelatedI installed the b43 drivers to enable the monitor mode for using kismet. but after installing, it shows "Device not Ready".
The dmesg | grep b43 output shows:
[ 86.449430] b43 ssb0:0: firmware: requesting b43/ucode15.fw
[ 146.449335] b43 ssb0:0: firmware: requesting b43-open/ucode15.fw
[ 206.448146] b43-phy0 ERROR: Firmware file "b43/ucode15.fw" not found
[ 206.448153] b43-phy0 ERROR: Firmware file "b43-open/ucode15.fw" not found
[ 206.448158] b43-phy0 ERROR: You must go to [URL] and download the correct firmware for this driver version. Please carefully read all instructions on this website. How to re-enable my wireless connection.
I have just installed Ubuntu 9.10 netbook remix for my new laptop. I've tried at great length to install the correct drivers to get my wireless up and running. I'm currently trying to install the Broadcom driver for my 802.11g wireless card. I have downloaded the headers and tools for ubuntu and am proceeding with the instructions given on [URL].
But when I get to these steps I come unstuck
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-portsrc.tar
I can make the directory and open it but when it comes to the third step I get a message saying that there is no such file or directory.
I'm having problems getting the wifi to work on my toshiba satellite pro l40 (psl4be). My laptop has a wifi card built in but linux cant seem to be able to find it. I tryed following these instructions and i got this output:
Code:
james@james-laptop:~$ lsusb
Bus 007 Device 001: ID 0000:0000
Bus 006 Device 002: ID 0bda:8197 Realtek Semiconductor Corp.
Bus 006 Device 001: ID 0000:0000
[Code]...
as you can see its telling me i have no wifi card, even though i am fully aware i do. ive tryed using ndiswrapper to install the windows drivers of the ethernet adaptor but my wifi still doesnt work, im guessing ethernet has nothing to do with wifi.I intend to convert from windows, however if i cant get the wifi to work i can only see linux at a major disadvantage as i use my wifi alot.