Have searched for this and am sure the answer is out there somewhere, but I can't find it. My wired network is configured as AUTO, and is DHCP, I can add a new static config, but can't get it to load, as the original AUTO always loads on a reboot. I need to be able to run sudo Network manager so I can reconfigure the default..
View 9 RepliesI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedI have 2 workstations that I'm trying to network together so that I can backup each to the other. One is XP sp2 and the other Fedora 9. Since installing Samba on the Fedora box and trying to get it configured, I have a problem that Add/remove programs won't do installs because it says there's no connection to a network. Network Manager says there aren't any connections, but it worked before the Samba install. Mozilla and Thunderbird can access the internet OK. Both workstations are connected by cable to my router and thus to my ISP (DNS server).
Two questions:- where can I find hints on setting up a wired connection (which card's MAC address does it want? router or wrkstn?) and Am I right that Add/remove is stuffed because of Network Manager?I now have Samba working from Linux to XP, but still can't get into Linux from XP. I tried the Linux PC's MAC address and set up a wired connection in Network Manager. NM still thinks there isn't one...
I seem to have somehow mangled my my Ethernet and wireless's connection to the outside world on my Ubuntu 10.04.1 machine. I was trying to get a static local IP, and that worked great for a few days, until I lost all Internet access completely. However, I can connect to my router on my wired connection - but not the wireless.
You can see what I did here: http://ubuntuforums.org/showthread.php?t=1600784
Now, I just want everything to work as it did when I installed Ubuntu 2 months ago. How can I reset Network manager back so that it just works? I realise that don't need a static IP, it can only be 2 IPs, as I have 2 PCs only.
Or is there some better way to manage my networks? I'm not the best when it comes to those.
Okay something i find very odd. When booting the livecd network manager is there, i select my wireless net and connect. Yet i install and it doesn't appear, i click the network bit under the status tab of the computer menu and by default it's using ifup and not network manager...anyone else get that? Or is it supposed to be that way...seems rather unfriendly though.
View 9 Replies View RelatedThe default name server set by network manager works just fine much of the time but there are times when it slows down badly. What I want to do is to have network manager add extra nameservers to the list when it starts the network.
View 2 Replies View RelatedI've been struggling with this a bit now, and I'm not sure what the problem is. I have a laptop with a BCM4401 Ethernet card as well as a BCM4311 Wireless card. The wireless card works great out of the box, I'm able to connect with it perfectly. The problem is the ethernet card. Here is the situation: The NetworkManager menu doesn't list "Wired Networks" at all (ie. it doesn't say "not managed", it just only lists Wireless networks) Going into Network Connections, there is an "Auto eth0" entry ifconfig shows eth0 (which I assume means NetworkManager isn't managing eth0) I have edited /etc/NetworkManager/nm-system-settings.conf to say managed=true I have edited /etc/network/interfaces to remove any mention of eth0 (all that's left is the "lo" lines) So I'm not sure why eth0 is still showing up when I run ifconfig, and why Network Manager is not managing it. Any ideas?
Edit: Not sure what I did but now ifconfig spits out this:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:26:2c:60:75
inet addr:10.0.1.12 Bcast:10.0.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:26ff:fe2c:6075/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
The MAC address of the "Auto eth0" entry is 00:1C:23:8F:D4:39, the same as the eth1 entry that ifconfig spits out.
I have been encountering this problem, not only on 10.4, but on older versions too: I use a wifi router to connect my laptop to the Internet, but sometimes I need to connect directly to another computer to move some files over GLAN. But Ubuntu's Network manager doesn't allow me to configure the eth0 interface without specifying a gateway (no gateway = grey submit button), but when a gateway is specified, it always rewrites the default gw specified already by the active wifi connection and returns back after unplugging the eth cable.
Of course this can be solved by a few route commands, but this is unacceptable since it is needed to establish the cable connection without any further assistance from within and as well without replacing the default gw and thus breaking the Internet connection. Is there, please, any possibility how to prevent Network Manager from replacing these routes?
I use network manager applet 0.7.1. I had set the automatic wireless connection to my my wireless network (WPA key secured). Recently, I get the following problem: At the automatic connection, I get the message: Network manager applet (/usr/bin/mn-applet) needs default keyering. As I don't know what it is to type it and then, deny or OK, it doesn't get connected to my wireless network.
View 5 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedHearing the praises about fastness of xfce all over the net i decided to try it for my fav ubuntu i rightaway installed xubuntu (without creating a bakup of the names of programs that were going to be installed which i generally do to fully remove any utility that i install for test) i understood that fast for xfce actually meant light(stupid me). now i switch back to gnome onlt to find xfce stuff like pacmn file browser and wicd to name a few. i removed the pacmn browser but when i remove wicd the default network manager does not show up in the task panel i would like to know:
1.how to get back to gnome'z default network manager AND
2.the list of utilities installed when xubuntu-desktop is installed
Recently I purchased a new laptop and installed openSUSE 11.3 x64 Gnome. I was running openSUSE 11.2 x86 Gnome on my previous laptop. Most things are working well, although still tweaking things here and there.
The biggest issue at the moment is starting the network. When I boot the system it loads into desktop (gnome) no problem, but then takes between 3 - 5 minutes to come up asking for Default Keyring Password before it will launch network manager. Everything else has loaded and it running fine except the network.
The first time I launched the system (after install) it worked perfectly, however soon as a set the password for the Default Key this started happening. The time delay before it launches does vary each time but always around 3 minute mark.
connect to wired LAN in ubuntu 10.04? I think I have specified the IP address and everything correctly. But it says no connectivity. In windows it says connected but I am unable to open any webpage.
View 2 Replies View Relatedentries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop.
View 5 Replies View RelatedI bought Sony vivo c series laptop and I tried to install ubuntu 10.10 version on it.After installed ubuntu the ethernet device was not activated. But It's working fine with wireless network. Similar problem I faced with older version 10.04 also.
Then, I tried with newer version 11.04. It detected Ethernet device.After installation over I just rebooted and I have chosen ubuntu OS, then it stuck and goes to blank screen.I am doing all my work in ubuntu only, i am struggling to recover form this problem for a long time.
System Information:
Model :VPCCA15FG/B
Processor : Intel(R) Core (TM) i5-2410M CPU @ 2.30GHz
RAM : 4.00 GB
System Type : 64 bit
Network Adapter : Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDE 6.20)
Display Adapter : AMD Radeon HD 6630M / Mobilie Intel (R) HD Graphics
I'm having network problems and I have no idea how to fix it. At first, my internet connection was suffering on all computers on my network (Mac, Windows and Ubuntu 11,04). So, I disconnected my cable-modem and then reconnected. Nothing.... So, I rebooted my Windows machine and the internet came back on that computer.
I then went to my Ubuntu computer and clicked on "auto eth0" (per the way I interpreted instructions from the internet). The symbol turned from the "two arrows" to what looks like a wireless, looking for a signal. I thought that maybe I should just reboot, as I did with Windows. However, when I did reboot, that same wireless symbol was there, then a message came up saying:
Code:
Wired Network: You are now disconnected
I can't seem to get my internet connection back on my Ubuntu computer, though it is working on every other computer on my network.
i installed linux at home on my laptop (dv2000, hp). Because i was having problems connecting to the internet through wireless. And wired at friends houses.So installed linux. Wireless took me a while but finally got that working. Now the problem i have is that wired is not working apart from at home. Any other router apart from mine it cannot connect to.
View 2 Replies View Relatedcan i be connected to both wired and wireless network at the same time iam using backtrack4 which is based on ubuntu 8
View 1 Replies View Related"Need help with entries for connecting to broadband. Was OK with ubuntu 8.04 which had boxes for DNS server, etc. The 10.04 asks for MAC address (?) and there is a space for "DHCP client ID". I don't understand these terms. I will appreciate some step-by-step instruction or example of how I may proceed, especially exact syntax for any command line work. I am in Chennai/Madras, and have a BSNL wired broadband connection to my Dell laptop." I have repeated what I tried in the ubuntu forum without success. I'm really in newbie category, and not comfortable with computer or internet jargon. I can still connect with ubuntu 8.04 and firefox, just once daily. In a later post I also added: In Ubuntu 8.04 there was a system> admin> network tab (missing in 10.04). In the connections tab "wired" was checked. The general tab had my computer name (tsq-laptop) for host, and a blank box for domain name. The DNS tab had 192.168.1.1 in the servers box (presumably my service provider BSNL), and nothing in search domains. The hosts tab had a list of IP addresses and aliases, the first few being:
127.0.0.1 - local host
127.0.1.1 - tsq-laptop
::1 - ip6 local host ip6 loopback
fe00:: - ip6 localnet, .... (and a few more such I think most (or all) of these entries were generated automatically by the system, since I don't understand the jargon at all! I don't recall having any difficulties then, some two years back.Before that I had major problems in using the internal modem for a dial-up connection, but got detailed help by e-mail/internet from some really knowledgeable people in Europe and elsewhere regarding linmodem configuration, which I followed blindly and it worked!
In 10.04 there is only the taskbar icon to edit settings, and it has a different structure. It asks for MAC address (example 00.11.22.33.44.55). Other info required is IPv4 settings, DHCP client ID, about routers and other stuff. There may be other system settings to be made, which I can try with proper guidance. The ubuntu help page gives very sketchy information, and the images are not clear at all. No response to that till second day. Subsequently: In the 'wired' tab the 'routes' button popped a table where I entered address as 127.0.0.1, and netmask as 255.0.0.0, leaving gateway and metric blank. This is all geek stuff for me - I'm an old-fashioned engineer from the slide-rule era!
Should all this have been in the newbie forum? Thanks, =TeeSquare=
I'm having a problem where the wired network wired network (eth0) disconnects when the connection is idle for a while (usually tens of minutes). It works fine every time I boot up, but eventually it dies, and I can't ping the machine, or ping anything from the machine. ifconfig shows that it still has an IP address. Running ifdown/ifup causes it to work again. I intend for this machine to be a server, so I can't afford to go restart it when I need network access. sudo lshw -class network gives me this:
[Code]...
I just installed (dual-boot with Vista) Ubuntu 9.10 in my Toshiba Satellite M300. The problem is that (when using Ubuntu 9.10), its network is dead, both wireless and wired. The LEDs of the LAN port don't even blink. My wifi is not also detected. Both of my wifi device and LAN port are functional when using Vista.
View 1 Replies View RelatedI am running ubuntu 9.10 on a dell xps m1530 laptop dual booting with windows 7. I am trying to achieve the following setup.
Wireless router <=========> Laptop <-----> Switch <-----> PS3
---- wired
==== wireless
Both laptop and ps3 have static ip addresses
The reason for this is I can connect to the internet on my ps3 through my laptop, and I can stream from my laptop to ps3 through wired connection. This works fine in windows 7 all I had to do was right click bridge connections. As I dual boot I don't want to have to make any changes to the settings on the ps3.
My interfaces are:
eth0 - wired
wlan0 - wireless
I installed bridge-utils and created a bridge and added both eth0 and wlan0 to it. However I could not get it to work. I have also tried internet sharing through network manager and firestarter.
I installed Ubuntu10.04, It cannot driver Wired network and wireless. Later I installed linuxMint9, wireless is ok, but wired network doesn't work. I am sure the lan cable is ok. It works in Windows.
View 3 Replies View RelatedI have just installed Ubuntu 10.04 on an HP Pavilion dv6000 series laptop, dual-boot. Everything is working except the networking. It can see wireless networks, and when I type in the password for my wireless network, it tries to connect, then asks for the password again. When I plug in the Ethernet cable, again it tries to connect, but after a few seconds gives up and tells me I am now offline.
View 8 Replies View RelatedI recently upgraded to 10.04 and now my wired network no longer works. I am unsure if it worked at all since the upgrade as that computer is rarely used, but it was definitely working prior to the upgrade. It is some sort of Realtec card, I believe. Does anyone have any suggestions? I'm running 32 bit 10.04 on a 2 GHz P4.
View 3 Replies View RelatedI installed xubunto 10.4 on my pc the other day and every thing was working fine and then the next day my wired network card went down. So I restarted it and it say Wired Network Disconnected. I tried doing sudo ifconfig eht0 up to try and bring the card back online but nothing happens. I also tried reinstalling xubuntu on my computer. Again my internet works then starts freezing up so I restart it and my ethernet card goes down again. I have tried also plugging it into the second ether net port on my computer but that does not seem to work. Also I went into my dhclient-script and went to the bottom to look at my network card stuff.
It reads
#Changed from 'ifconfig $interface inet 0 down' - see Debian bug #144666 ifconfig $interface inet 0
exit_with_hooks 2 "$@"
fi
I use Ubuntu 10.04. Last night, I installed the most recent updates for this istribution, and before I shut off my laptop, my internet was working smoothly. However, today my Internet connection is behaving very strange. When I try to connect to the internet, my browser times out or cannot establish a connection. I'm able to connect to low-input sites like Google search, but I cannot connect to sites like Facebook, Wikipedia, or even the Ubuntu forums (I'm currently using a friend's laptop to post this). Pidgin and Skype work without a problem, as well as Transmission. I primarily use Firefox, but I also tried Chrome, Opera, and Epiphany; none of them worked. Oddly enough, my update manager also cannot connect to the Internet to retrieve updates.
I have restarted my router, but it still works properly, as it is running fine on my friend's laptop. I have tried 'no proxy' in Firefox, but it did not help. I also disabled IPv6 in etc/sysctl.conf by adding the code:
#disable ipv6
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1
[code]....
I just finished installing Ubuntu 10.10 64bit. During installation Ubuntu was connected to the network and was downloading updates. After rebooting though, it cannot connect to the network.
View 1 Replies View Relatedwhat is the command to restart the network services? ive forgotten i think it uses -hup switch though. about 1 in 20 boots on my desktop ubuntu system results in the system insisting its no longer on a network yet has a fully functioning network card. a reboot always fixes the issue but that doesnt seem like a long term solution to me. If I ping a neighbouring system I get nothing. (sent packet count increases in ifconfig) If I ping from a neighbouring system back to my desktop I get nothing (no change in packet count) I can bring down and back up the network interface with no results. A sniffer shows the system definitely isnt sending anything out Everything worked previous boot and will work again after a reboot.
View 2 Replies View RelatedI am working on ubuntu 10.10 in a VM. I went ahead and did updated the system when prompted. That has disabled my wired network connection. I am not sure what is the reason. If it is a device driver or any network service. I guess device driver is not an issue as I can detect my network card from ubuntu.
Does any one know the solution?