I'm staying in a new flat and the landlord told me the widow has a four digit pin. The network shows up as WPAA/WPA2 personal. When I go to enter the pin, 4 digits isn't enough to let me try to connect. She swears that's the passcode
View 1 RepliesBefore i want to buy (OLD) Sek'd Prodif plus soundcard, i want to know, this card is working with Ubuntu 10.04?I found some information in the Alsa page, but i just shaw digit i/o, and i don't need digit i/o, just ANALOG I/O.Somebody can tell me about this card?I really need any information about driver (alsa or oss)
I have a new computer on which I have installed suse11. My old computer has suse10. I have copied all my files to move to the new machine and I have the same username on both systems but the uid on my old one is 501 and on the new one it is 1001. know this is going to cause trouble
View 1 Replies View RelatedI have been running Ubuntu 10.10 and have found that at any time I am connected to the Internet that I will randomly see high port numbers open when doing a port scan on my computer all are in the unknown listings with five digit numbers so I don't know what is going on or who is using them. Please check your system to see if you are having the same thing happen by using network tools and filling in your local ip address in the port scan tab. If you shut down your Ethernet interface and run port scans the high ports are no longer open. this will at least keep whoever is using your ports at bay when you are not using the net.
View 4 Replies View Relatedin terminal: if var = 2 and we write the file name "name$i" it would be "name2" but my file name is "name02" (in fact I wanna have a 'for' loop on about 50 files named: a01, a02, ... , a50)
is there any way to make a 2(n) digit number with additional zero(s) like "%02d" in C ?
I have a file that contains something like this:Quote:
HOURS FROM-TO
------------------------------------
4 10.00-14.00
8 8.00-16.00
10 10.00-20.00
Now, i need to get only the first column, i know how to do that awk '{print $1}', but how can i make an operation with all these numbers? (8+4+10...)
i am trying to replace the last digit in the ip address(25) with 47 using following:Quote:echo 192.168.0.25|sed -r s/([0-9]*.[0-9]*.[0-9]*)/47/g'but not able so far, was wondering if you can help, so i can find my mistake.
View 6 Replies View RelatedIs it possible to point to a two-digit interval with regular expressions?
Background:
I'm using mplayer to watch tv shows, that often have episode numbers in their names. I know how to easily add several files to the playlist by using brackets, by typing something like
$ mplayer tv/South.Park.S1.E0[1-5]*avi
Is there a way to point to files 06-13 in a single expression?
I've noticed a bit of a problem here in the last few days...after some point, my numeric keypad stops being a numeric keypad; instead, it controls the mouse (5 right clicks, and the outer keys move the cursor in the appropriate direction). It doesn't appear to happen on boot, as I generally type the numeric bits of my password with the keypad, but some point after. The only common events I can think of where this has occurred is either after connecting to the system via SSH, or after swapping to tty1 (which usually requires re-enabling of numberlock for the terminal to recognize digits, again for the password). No matter what state the NumLock is in (off or on) at this point, the keypad fails to function as a keypad.
View 2 Replies View RelatedI'm trying to convert an 8 digit string into a long. The code compiles, but I'm getting only 1 digit placed into the long.
[Code]....
I just want to grep for a n digit number followed by M alphabet. Generally for a three digit number i can give grep [0-9][0-9][0-9]M , but if the digits are increasing it is tough to represent them.
View 7 Replies View RelatedI want to print a single digit integer on to the screen using the int 0x80. I have loaded the number in the ecx(=5, say), size in edx (=4, lenght) and eax (=4) ebx (=1). I've added 48 to the contents of ecx, and then calling int 0x80, I thought should print 5 on the screen.
However it does not print anything. also gives no errors. I checked the contents of the ecx reg (gdb), it has 53.
A snippet showing the this will be great. I've seen snippets using the c library (printf), but I want to see how it is done using int 0x80.
I just started learning shell programming and I'm trying to create a shell script that produce something like this:
Input: 1 234 5 678 9
Output: < <<< 5 >>> >
Input:abc d 1234 5 5 67890 e f ghij
Output:abc d <<<< 5 5 >>>< e f ghij
Characters with values less than 5 will display '<' digit values greater than 5 display '>'. The digit '5' will be left unchanged.
Below is my unfinished code:
#!/bin/sh
read userInput
for f in "$userInput"
do
f1="$(echo ${f} | sed "s/[^0-9]//g")"
if test $f1 -lt 4
then
f3='<'
elif test $f1 -gt 6
then
f3='>'
fi
f2="$(echo ${f} | tr "$f1" "$f3")"
echo $f2
done
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI am trying to setup a dhcp server for my internal network. I have two NICs, a modem, and a wireless router. I have my server connected directly to my modem which is providing me with Internet access on eth1 and is working fine. I have dhcp and dns setup on eth0 which is connected to my router. The router shows that it is connected to the Internet but when the router gives a client computer an IP address, the client is unable to connect to the Internet but can connect to the router. I will post my configuration files below with my current configuration.
[Code]....
I can connect to the internet through wifi, but I cannot connect to anything on my network. I have a printer and a NAS, so I would really like for this to work again. I have a dell laptop with a Broadcom card.
View 9 Replies View RelatedI had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.
However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.
Here are some outputs:
I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.
I can not connect to wifi networks, i can see them but not connect.
My wifi device is:
I have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies View RelatedRight now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedI use Ubuntu i can not work internet connection Please help me search for a solution but did not find
Use the USB modem model x060s.
I've recently set up a local development webserver using Karmic Koala. I downloaded and installed the server version of Kubuntu and have the web server working.
The problem is that for some reason, I'm no longer able to connect to the internet. I can connect to my router, and other machines in my network can VNC into the server.
I'm using an wired connection to the router and have the server set up on an internal IP of 192.168.0.100. I used to be able to connect to the internet, I downloaded and installed a load of packages etc before it stopped working.
The last thing I remember doing before it stopped working was that I installed Samba so I could share files with the other machines on the network (two Macs running Leopard and a WinXP laptop).
I got the share working - I copied a load of files to the server via the share, rebooted, and for some reason now I can't connect to the net (and other machines can't see the Samba share either.) However I can still VNC into the server.
I have a Dell PowerEdge 1650 server with 3 NICs in it. I am trying to use one NIC (eth0) to connect to the internet, the second NIC (eth1) to share the internet connection to a LAN, and the third NIC (eth2) to connect to the LAN.
It is running Ubuntu server 8.10
The problem that I'm having is that NetworkManager (version 0.7.0) keeps setting eth2 as the default connection, and then I don't get any internet at all from the server.
My main goal is to be able to share files from the server to computers on the LAN. The secondary goal is to have a virtual machine hosting a Halo server, connected through eth2, so that it can host LAN games. But that is a secondary goal after I get the connections to work.
I've been looking around and finding other people who have done bits and pieces of this, but not the whole thing. I had been hoping to simply use the NetworkManger, but I don't mind editing config files.
Also I can't seem to find any good instructions on editing the /etc/network/interfaces file. The man file is incomplete, and everything seems to point back to the man file.
I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI was having no problems (that I knew of) browsing the web since installing Ubuntu 10.10 a week or so ago. I was previously trialling Win7 as my customers will likely be using that in the future. Then I wanted to go to internode.on.net. Got the following: Quote: Firefox can't establish a connection to the server at internode.on.net. or Quote: Oops! Google Chrome could not connect to internode.on.net
As it was just after Christmas I thought it must be down, for upgrades or maintenance etc. I later tried to go to Freebsd.org; same error. I've been having a small number of other websites give the same error. I thought nothing of this until I tried it on my wife's macpro. I could log onto all the websites I wanted to and none gave any indication of having been down. Both boxes are on the same adsl connection. I still can't access internode or freebsd on 10.10 yet have been able to access every website on OSX. Now, I was only looking at them for info but am worried I won't be able to access something important. (so far everything I 'need' is working)
ping just drops out. edit: weirdest thing! I just retried and now can not emulate the problem for internode. freebsd still won't show. that is less than five minutes between problems and resolution! I hadn't even posted! But I still would like to have an idea of what is going on. Here is the ping error for freebsd: Quote:
[Code]...
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I wanted to be able to have separate NICs with separate IPs connecting to separate gateways on a machine so I could put an ftpd on each one. I tried binding an ftpd to each, and running separate instances of the ftpd. I tried virtual hosts.
NOTHING worked. I could either use one ftpd or the other. I could either connect via ssh on one IP or the other. the second I turned one NIC off stuff would work again. I messed with basic iproute commands, andnothng worked until I got this script to run, which allowed me to use each NIC independant of the other.
Code:
#!/bin/sh
#ip route flush all
ip route del default dev eth1
ip route del default dev eth0
ip route del table 1
ip route add table 1 to default via 10.10.10.1 dev eth1
code....
But now, samba client doesn't work. cifs mounting doesn't work either. It can't connect.
BEFORE I ran that script, I could connect via ssh, or to the ftpd running on the machine using a LOCAL IP - 10.10.10.2. AFTER, I have to use the external IP, or I cannot connect. I know that has something to do with it, but I do not have the advanced linux routing knowledge to redo the script or come up with a solution.
i'm using ubuntu 9.10 and i want to connect to a vpn network which i should use to browse internet.but i don't know how i can do this.i tried vpn connection from above menu of ubnutu but it didn't worked.i should connect to lan or wireless and then use a vpn to browse internet.i have username and password and i should connect to isp.um.ac.ir.i dont know anymore information about which type of vpn is that.but i should use L2TP when i use a software to connect to vpn in windows and i can use a program called ibsngdialer or i can create a new vpn connection in windows 7.but i dont know how i can connect to this vpn in ubuntu 9.10
View 1 Replies View Related