I have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies
I have a Toshiba Satellite L645D-S4030 running on Ubuntu 10.04. When I plug an ethernet cable into the ethernet port, simply nothing happens, and when I try to connect to my wireless network, it connects but there is no actual internet available. I'm sure the wireless works as I'm on an older model Toshiba Satellite and it connects fine (running Ubuntu 10.04 as well.) I tried to follow the procedure in the stickied thread, so when I type in these commands, here's what shows up:
Lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge Alternate
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
[code].....
I have a wireless Internet modem (USB) and a LAN Ethernet connection. I can only pick 1 of them to connect to (by disconnecting the other). How can I connect to both at the same time?
View 6 Replies View RelatedWhen I select the wifi icon on the panel, it just shows "No network devices available". I know my network can be found when I search with my iPhone, so I know there are networks to connect to. So, I checked the drivers, and it informs me that the B43 and STA drivers are not activated. So thats not a big deal, I guess, but when I use my ethernet cord, my laptop doesn't recognize/acknowledge (I'm not sure what the right term would be)it. I'm fairly sure I can't activate these drivers without an internet connection because when I do try, a message pops up saying "failed to fetch" with some long link.
My only guess is that it could be a hardware problem, but I really have no idea. I guess the ethernet problem is my only real problem. Because after I establish and internet connection the the rest is easy to fix.I'm sure its obvious, but I'll go ahead say that I'm a novice ubuntu user. I've only been working with it for about a week, but I'm learning alot.
I have a Dell Inspiron 1545 with a Dell Wireless 1397 WLAN Mini-Card and a Marvell Yukon 88e8040 PCI-E Fast Ethernet Controller, and I cannot for the life of me get the internet to connect. I've tried both wired and wireless connection. I have a PPoE connection through a Verizon FIOS Actiontek router I believe, though the PPoE part may be wrong, I had one five years ago when I first got their internet so they may have changed it. Point is that the ethernet and internet won't work, and without a working ethernet I can't fetch the right drivers for anything.
I had also tried plain ubuntu 10.04 and couldn't get them to work then either. It said 'disconnected' at first, and then said 'device not ready' There is no hardware switch but there is a key toggle. It doesn't seem to matter what state the wireless was in before booting into Ubuntu Studio, so I'm lost as to where to even start. Even though the network manager isn't there like in regular ubuntu, I assume there will be a simple way to connect to the internet once the drivers are found, right?
I've seen issues and read about fixing them, but usually it uses an ethernet connection to fix the wifi connection and, being new to linux (<50 hours worth of experience lifetime), all I managed to do trying to fix it myself was screw up the installation to the point where the laptop couldn't access the home folder and I had to reinstall. Other than that, I am usually very good at following instructions, as long as they apply to my laptop's issue I guess
The only other issue is minor, I can't seem to control the USB mouse I have, but the trackpad works fine so it's no big deal, probably a matter of downloading the mouse driver once the internet works.
Currently I do have internet access via the same laptop while booting Windows 7 (I installed Ubuntu Studio 10.04 on a 10GB Partition with the idea of using an external HD for most data storage).
Oh and it is a 64-bit machine, the Studio version I installed is 32-bit.
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedJust installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
Everything look great but I don't get how to connect to ethernet connection or how to turn on wireless. I always had automatic connection on ubuntu since 8.04. For now I'll look for some repository and download the "nt" applet manager.
View 3 Replies View Relatedthere are two computer
wireless internet accessible notebook.
desktop with no wireless card (but just normal lan card).
I connect two computer with lan cable, and I want to use internet in desktop computer through the notebook's wireless lan
what kind of setting do I have to do?
desktop's OS is Ubuntu, and notebook's one are Ubuntu, Windows XP.
Just today I installed opensuse 11.3 on my Compaq CQ61. Even though I am able to connect to networks (both with an ethernet cable and wireless) I don't have internet access. I have used opensuse for a very brief period in the past and I had no such problem.
View 3 Replies View RelatedI have a dual boot netbook (Acer Aspire One D255) with Mint and Ubuntu 10.4. Using Mint, I was able to connect via the ethernet and install all updates including wireless driver.
In Ubuntu 10.4, regardless of what I do, I cannot connect via ethernet cable at home and at work.
How can I locate the right wireless driver? In the past, I have always been able to simply plug in the ethernet cable and get the necessary updates.
I recently moved to a student dorm in my university (RWTH Aachen) and I have an ethernet connection from my room. The thing is that I can't connect to the internet, I don't get any IP through DHCP. I tried using wicd instead of network-manager, and doing it manually with dhclient. None of those worked (actually I don't know much about how networking works so maybe I didn't do it well with dhclient). The weird thing is that Windows 7 gets the IP instantly and I can connect to the internet from windows. But I don't know why Ubuntu refuses to get an IP. Info from lshw, lspci:
lspci
Code:
sudo lspci -vv
02:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4380 (rev 10)
Subsystem: Sony Corporation Device 905e
[Code].....
I had this sticky problem with b43 drivers. Unfortunately, on my Acer Extensa 5620z I'm not even able to connect via ethernet, so I can't download upgrades, driver or whatever. This was initially with 11.04, so I've decided to get back to 10.04, but the problem persists. Then, here we go with details:
networking checked - is enabled.
Ip configuration (I've got static local address) - is ok.
Ifconfig - recognizes eth0.
Iwconfig - recognizes wlan0.
Ping - 100% packet loss, always.
dig - goes on timeout.
netstat -an - doesn't show any connection with external address.
I own a D-Link DI-604 wired router and I've started getting some issues after Ubuntu 9.10 to 10.04 upgrade(Ubuntu 9.04 used to work OK!). The problem is that Ubuntu recognizes all my ethernet cards (see below), but I can only connect to the internet through eth1 not eth0 (which is my Windows default). If I try to plug the cable in eth0 nothing happens (at least not in Ubuntu 10.04 and 9.10).
Code:
lucas@lucas-desktop:~$ sudo lshw -C network
[sudo] password for lucas:
*-network:0
description: Ethernet interface
[code].....
I cannot connect to my Ubuntu Server. Currently I'm trying via my MacBook through ethernet. A physical connection is apparent; however, the computers cannot communicate. To resolve this problem is important because I just need basic SSH functionality. While connected through ethernet, my MacBook cannot ping my Ubuntu box. Here is a screen shot of the Mac's network setup, a ping attempt, the ifconfig's of both machines.
[Code]...
I wanted to test 10.04 and downloaded Wubi to do so. Normal setup, it automatically picked the 64-bit version. After booting into Wubi, installing my ATI drivers and restarting it did no longer connect to my ethernet. A few reboots didn't help so I went back to Windows for troubleshooting.
However now Windows doesn't connect to the ethernet either. It's plain dead, Windows doesn't find any connections and the modem doesn't light the Ethernet cable LED. The modem itself works fine with wireless devices. I have now tried everything including uninstalling Ubuntu, system restore, driver rollback, driver update, BIOS default settings, a different cable, a different modem etc.
This is a 64-bit specific issue because I tested the 32-bit version of Wubi 10.04 a few months ago without problems.
Windows 7 x64
Wubi 10.04 x64
Gigabyte P55-UD3 with onboard Realtek RTL8111D LAN.
I'd like to get out of this without Ubuntu effectively having broken my hardware and my trust in it.
My laptop was on windows xp and when I installed ubuntu linux my NIC Card driver was gone (I think) and now I can't connect to the internet using an ethernet. I have the driver on the desktop of my Linux laptop but I don't know how to add it using terminal or any other options.
View 1 Replies View RelatedI am using Ubuntu Server version 10.4, and am trying to connect to the internet via an ethernet cable. This may and probably is incredibly simple, however, I could not find anything that pertains to it.
View 9 Replies View RelatedJust installed Scientific Linux 6. Does anyone know how to get it to connect to wired ethernet network?
View 3 Replies View RelatedMy ISP finished some 'upgrades' on its infrastructure. The result is that I am having great difficulty in connecting to the internet.
I have 3 operating systems on my box - XP, Fedora 8 and Feota 12.
I connect using an ethernet card, using dhcp. In fedora 12, the ethernet card is controlled be networkmanager. After the ISP completed their upgrades, I was not able to connect. I tried to connect manually using
Code:
There was an error message -
Code:
I read the advice here: [url], and removed all but the important lines.
But even after that neither ifup eth0 or dhclient eth0 works.
In fedora 8, the ethernet card is activated by ifup eth0 in /etc/rc.local. I was able to connect on a couple of occasions, but that too stopped working. I tried both ifup eth0, dhclient eth0, and tried to use the gui( which fires the dhclient command), but none worked.
When I use windows, it takes about 2 minutes to get an ip (earlier it was immediate). Sometimes that doesnt work and I have to click on "repair" whereupon it starts working.
I run Ubuntu 10.04 on a PackardBell laptop, with an Orange Livebox 2 providing ADSL. I am connected to the Livebox via WiFi, but I can't connect using the ethernet cable. I think that in making changes to the system some time ago I must have ruined something, but I can't work out what.
View 8 Replies View RelatedI am using a cable modem wired to my PC via ethernet. My ISP is Road Runner, through Time Warner Cable.
I entered my IP address, Netmask, and DNS Servers into the network, not using DHCP. This was how I was able to achieve a network connection.
I am connected to the modem, but I cannot get internet.
Here are my stats:
I have 2 LAN ports. one from the motherboard (on board) and the other from a lan card i bought a few days back. one is use for browsing the net, the other for a media player.
problem is i cant connect to both the eth0 and eth1 at the same time. i have to disconnect one of them to connect to the other. and this really gets irritating as it doesnt always work as flawlessly as it should. what am i doing wrong?
Output of "ifconfig":
Quote:
I'm on ubuntu desktop 10.10 64 bit.
I've recently bought a recycled computer for my office. The plan was to get an old cheap computer and use it to write LaTex documents but nothing else. However, I can't seem to get the thing to connect to the internet. I'm on a University network which has a funny setup but I don't think that's the problem.So here's the deal. I have tried this with 9.04, 10.04 and 10.10 and it hasn't worked. The computer recognizes the ethernet cable. If I issue the command "sudo mii-tool eth0" and get back "eth0: negotiated 100baseTx-FD, link ok". However, click on the networking logo on the top right, and click auto eth0, it tries to connect for about 30 seconds, then gives up. Unfortunately I'm pretty clueless when it comes to networking so I have no idea what to do to try to fix this.
View 8 Replies View RelatedI have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies View Relatedwlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies View RelatedI installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
