I trying to make my ubuntu 8.04 working with an Hardware modem 3com us robotics message modem. Is there any manipulation to do? My objective is to install an Hylafax server on this ubuntu ( already done), but no modem is recognized.
PS: my computer doesn't have any internet connection
I've install Linux UBUNTU in a HP Brio and i can't configure my modem correctly (HP Fast Modem D4810B with 3 com x2)
View 3 Replies View RelatedI'm new to ubuntu. I'm trying to get my US Robotics external serial modem working so I can use Ubuntu.
I copied
wvdial & dependencies:
libuniconf4.6
libwvstreams4.6-extras
libwvstreams4.6-base
to a flash drive.
How do I get them to /var/cache/apt/archives? I tried to copy and drag&drop wont work.
on my server (fax server)with Cento O.S 5.2 final kernel 2.6.18-92.el5 the external serial modem 56k us robotic is not recognized.Kudzu not notes the modem.PS .On the same server ,same modem ,same serial but with Centos 4.5 ,this as regular detect.
View 9 Replies View RelatedUnder ubutntu 10.04 I'm unable to acces the config page 192.168.1.1 the browser just won't open th page (and I have Internet as I'm writing this right now).
View 9 Replies View RelatedI've been using this USB Wi-Fi Adapter since 7.10 on my previous box and it always worked fine. I've used it also on a 9.04PPC edition. Now I've got a new PC (AMD AthlonII x3 435, 4GB RAM) and I've installed Ubuntu 9.10 Amd64 Desktop, and this device won't work. It doesn't even show on lsusb. Here's my output:
Code:
roby@roby-desktop:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
Other commands (iwconfig, ifconfig, sudo lshw -C network) doesn't show anything that has something to do with wireless networking. I've also tried ndiswrapper, but I cannot manage to get x64 drivers (they comes only with an installer package for Vista64, wich I have not).
That's my kernel version and architecture:
Code:
roby@roby-desktop:~$ uname -mr
2.6.31-19-generic x86_64
I have looked for information regarding this card. I have tried to install it using ndisgtk and ndiswrapper. I have the green light on the card but it won't work. When I have tried using ndiswrapper to install this card, I can get the driver to install but then the instructions say to type the following line which I do, but then it gives me an error message:
sudo modprobe ndiswrapper
The error message is:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
I am trying to get an old IBM 600e to work with Centos 5.5. The install seems to have gone well but I am struggling to get any networking support. I am concentrating on a 3Com 3CCE589EC card which seems to be on the supported list. It works fine under Windows 2000 on the same computer so I believe the hardware is OK. When I insert it the following messages are shown in /var/log/messages:
pccard: PCMCIA card inserted into slot 0
pcmcia: registeing new device pcmcia0.0
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use
Am I likely to have an easier time with a different card and if so which?
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
I have no experience with embedded systems hardware and am looking to build a micro-budget underwater robot for exploring the bottom of a lake on the family homestead. I don't have much money to spend on this, but I want to run Debian Linux (I have lots of Linux Admin experience and am right at home with a terminal) or something like that on a small chip which needs to be able to:
Connect to the control computer via ethernet. Get digital or analog data from a GPS module, pressure sensor, etc. Control a few thrusters. Do various other hardware IO functions. Possibly control a robotic arm (this is a long shot, I know). And costs less than about 100 dollars. I have no experience with embedded systems hardware so I really don't know what to buy or where to start, aside from the fact that I heard that this would be a good place for something ARM-related. I am a software developer with time to burn as far as writing the programs to support this goes.
i wondered if there is any way to use a 3com 3crusb10075 with lenny amd64 (5.0.5).
View 1 Replies View RelatedRunning OpenSuSE 11.2 32 bit dual boot with XP. 3Com OfficeConnect Wireless 11g USB dongle connects and works happily in XP. Can not get it to associate with the same AP in Linux.
Device identified as:
Device 3CRUSB10075 wlan0
Driver zd1211rw
Appears to be installed, to the extent that it sees the broadcast SSID. Output of /usr/sbin/iwlist scan correctly identifies the ESSID and encryption (disabled) More particularly, /usr/sbin/iwconfig outputs that the "Access Point: Not-Associated"
linux-tgb6:~ # /usr/sbin/iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
I am trying to install Centos5.6 on an older machine which has a 3com NIC. how I can get the kernel modules for this nic, or do I have to compile a new kernel with this enabled?
View 19 Replies View RelatedI just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View RelatedMy modem is modem SU-6200 cdma 1xEVDO cannot detect. I need driver, but I cannot online in ubuntu 9.10. Check my modem at [URL].
View 2 Replies View RelatedI have a dual boot Win XP and Ubuntu 8.04. I use my phone Nokia 7210 Supernova as a USB modem on XP using NokiaPC Suite. I don't know how to do this in Ubuntu.
View 1 Replies View RelatedI'm using an external Huawei CDMA fixed wireless terminal (phone + dial-up modem). It connects to my PC via a USB port. Actually my PC recognizes it (after driver installation) as "TIUMP Serial Port". I guess the driver is a kind of USB adapter for a serial port.
I can't get it to work in ubuntu 9.10. I ran wvdial (after installing dependencies and wvdial package) and it doesn't recognize my device as a modem. Is there any solution to this problem? Without solving it, I won't be able to go online from ubuntu.
I'm running Ubuntu 9.10 (Kubuntu) and have a LG Arena (KM900) smartphone which when plugged into the USB socket and I select the iSync option on the phone, the handset is correctly identified as a Mobile Broadband device in Ubuntu network manager. However, I'm having difficulty getting Ubuntu to connect to T-Mobile through the 3G modem. I've referenced [URL] and[URL] and I can not connect. I'm assuming that this is something to do with Mobile Broadband settings I'm using:
APN: general.t-mobile.uk
Username: user
Password: pass
I have a WiFi modem. Its Chinese(non-brand) modem. I can use this modem in windows Xp easily. Just need to install a software given with this modem. but cann't use it in Linux as using ubuntu 9.10 below is my lsusb report.
Quote:
ubuntu@ubuntu:~$ lsusb
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
I moved from Debian to Ubuntu a few months ago, with everything working fine, except my 3G modem (which worked with wvdial and umtsmon in Debian).
The packaging claims that it is a Huawei E160, but lsusb says different: E220 (12d1:1003).
I've followed various instructions from these forums and the wiki, and it seems to be being recognised as a modem (I can set up an O2 prepaid (UK) connection), but it refuses to connect.
i m able to change mode to usb modem device 9603 Micromax 300 G USB modem.
but still got stuck with
bharat@ubuntu:~$ sudo modprobe usbserial vendor=0x1c9e product=09603
FATAL: Error inserting usbserial (/lib/modules/2.6.31-14-generic/kernel/drivers/usb/serial/usbserial.ko): Invalid argument
how to run my telstra next g usb modem in ubuntu 10.4?
View 4 Replies View RelatedI have a USB modem working in windows. But no luck to connect using Ubuntu 10.04.
I have setup usb-modeswitch and other stuff. The modem is attached to port ttyUSB0. But when i run "sudo wvdialconf" it displays message like this.
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial?
read the FAQ at [URL]
If you still have problems, send mail to <wvdial-list@lists.nit.ca>.
organize networking with usb 3g modem in my Ubuntu Server 10.04. Or give me any links how to do it.
View 1 Replies View RelatedI am running Ubuntu 11.04 on an external USB drive on a Dell D630 laptop.
My issue is I can't get my 3G modem to work. It is a K3770 Huawei modem.
When I plug it in after boot up it is not recognized at all as far as I can tell. (Which is not very far).
When I plug it in before boot up it shows up as a CD rom drive. I have usb-modeswitch is installed. (It was installed by default during the 11.04 installation.)
what to do to get this to work? Remember my Ubuntu is running on an external USB drive so anything that switches USB off even temporarily won't work. (I don't think).
I've just spent 2 days of extensive lurking how to solve this problem. Namely, i have ZTE usb modem, model MF626 T. The sofware provided with it works only under windows. What i tried first was to download hso.ko module (copied to the /lib/modules/`uname r`/kernel/drivers/usb/serial/). Then i downloaded hsolinkcontrol and HSOconnect. Unfortunately, i didn't get those /dev/ttyHS* ports that should appear. Only /dev/ttyUSB*. I blacklisted option module. Then changed occurences of ttyHS* to ttyUSB* in .py sources for HSOconnect. what i get is the popup interface GUI that has "connect" button disabled. Then i tried to set up connection via gnome-ppp. The usb modem was automatically detected as /dev/ttyUSB1. But when i supply telephone number that i got with the stick, i get message after "Sending: ATM1L3DT*99*" ->"no carrier found". Then i tried to copy the other two modules i found on the net-airprime.ko and usbserial.ko. I've renamed the option.ko and old usbserial.ko in order to use them later if needed. And also i've put in /etc/udev/rules.d/
some scripts i've found on net, used to mount and unmount ZTE modem. None of all that worked, and somehow i have the feeling i've messed up everything. What i just posted above is the sum of everything i googled out. I would be very glad if someone would help me out with this. I usually like to spend some time lurking and googling, but this is simply taking too much time...
I am trying to set up one home networking lab in which I plan to use three routers. One of the router will be QUAGGA over Ubuntu Server. I cannot figure out how to setup my HSIA USB Modem (TataPhoton+ from Tata teleservices)in ubuntu server. This device works fine with Ubuntu 9.10 desktop edition. Just a few clicks in network manager does the job, but how to achive the same in ubuntu server which have no GUI
View 1 Replies View Related