Ubuntu Networking :: US Robotics USB WiFi Usr5423 ( Zd1211rw) Not Working On 9.10 Amd64
Feb 7, 2010
I've been using this USB Wi-Fi Adapter since 7.10 on my previous box and it always worked fine. I've used it also on a 9.04PPC edition. Now I've got a new PC (AMD AthlonII x3 435, 4GB RAM) and I've installed Ubuntu 9.10 Amd64 Desktop, and this device won't work. It doesn't even show on lsusb. Here's my output:
Code:
roby@roby-desktop:~$ lsusb
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[code]...
Other commands (iwconfig, ifconfig, sudo lshw -C network) doesn't show anything that has something to do with wireless networking. I've also tried ndiswrapper, but I cannot manage to get x64 drivers (they comes only with an installer package for Vista64, wich I have not).
That's my kernel version and architecture:
Code:
roby@roby-desktop:~$ uname -mr
2.6.31-19-generic x86_64
View 1 Replies
ADVERTISEMENT
Jul 8, 2010
I'm new to ubuntu. I'm trying to get my US Robotics external serial modem working so I can use Ubuntu.
I copied
wvdial & dependencies:
libuniconf4.6
libwvstreams4.6-extras
libwvstreams4.6-base
to a flash drive.
How do I get them to /var/cache/apt/archives? I tried to copy and drag&drop wont work.
View 2 Replies
View Related
Oct 24, 2010
So, I'm stumped. Ubuntu studio didn't come with nm-applet, so I installed it myself. Now that I have it, I can't connect to my network. Here's the output I get when I run it in the terminal:
Code:
** (nm-applet:1979): DEBUG: old state indicates that this was not a disconnect 0
** (nm-applet:1979): DEBUG: old state indicates that this was not a disconnect 0
[code]....
View 1 Replies
View Related
Jan 31, 2010
I have an Airlink101 AWLL3026 and the zd1211rw driver. When I insert the USB card, it is recognized but syslog indicates that the firmware wasn't where is was expected.I am running an updated Linux Mint system (based off of Ubuntu): Linux hoverfly 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux Plugging in the USB Wifi adapter results in the following on syslog:
Jan 31 19:04:08 hoverfly kernel: [105617.584051] usb 1-7: new high speed USB device using ehci_hcd and address 9
Jan 31 19:04:08 hoverfly kernel: [105617.740521] usb 1-7: configuration #1 chosen from 1 choice
[code]....
View 3 Replies
View Related
Jul 5, 2010
I trying to make my ubuntu 8.04 working with an Hardware modem 3com us robotics message modem. Is there any manipulation to do? My objective is to install an Hylafax server on this ubuntu ( already done), but no modem is recognized.
PS: my computer doesn't have any internet connection
View 1 Replies
View Related
Apr 19, 2010
For the past almost year, once in a while my wifi won't work.At home,I use an ethernet cable. When I go out, or am out of town, about 1/3 times the wifi won't connect, and won't even find access points. Once this happens, no matter how many times I restart, the wifi won't work. The ONLY way I can get it to work again is if I reboot with the ethernet cord plugged into the laptop and into a router/switch/hub. My neighbor (the one who got me into Ubuntu) is a pretty experienced linux network admin who looked a my laptop and has no idea what is causing this. I've attached my syslog log entry for the last time this happened. Does anyone know why this is? I LOVE ubuntu but I may need to switch back to Windows because I NEED wifi to work.You will see in the logfile I tried connecting to two different APs. The one that always works is the second one, called linksys.
Syslog:
---------------------
Apr 19 12:04:07 ubuntu NetworkManager: <info> Activation (wlan0) starting connection 'Auto sammysosa'
Apr 19 12:04:07 ubuntu NetworkManager: <info> (wlan0): device state change: 3 -> 4 (reason 0)
Apr 19 12:04:07 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Apr 19 12:04:07 ubuntu NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
View 1 Replies
View Related
Feb 3, 2010
I just recently installed Ubuntu 9.10 on a dell laptop. My WiFi connection that I've been using on the same computer for years is not working when I log on. However if I run the burnt image cd and choose the option "Use Ubuntu without making any changes to your computer" I am asked if I want install proprietary drivers. If I activate one "Broadcom STA" I can connect to the wireless connection in my house. When I am using the version installed on my laptop it doesn't ask me if I want to install the drivers and it doesn't even find them when I go to hardware drivers under system. So to sum it up I can get connection when I run Ubuntu from the cd but not when I run the Ubuntu on my laptop.
View 3 Replies
View Related
Jun 1, 2010
I have a wlan adapter working in 9.04 out of the box with the Intersil Corp. Prism GT driver. After a clean install of 10.04 the adapter is not working. How can I fix this? I am using Ubuntu for a while now but don't know the ins and outs of installing drivers and firmware yet.
View 3 Replies
View Related
Sep 1, 2010
The system recognizes the signal and asks me to input the network password, which matches;but when asked for the second password, the "nm connection editor", the password doesn't match. Isn't that password the same as the log on?
View 1 Replies
View Related
Nov 16, 2010
Moving back to 10.04, I've been trying for DAYS to get my wifi working properly. I've been scouring the boards trying everything under the sun,including attempting to install a new kernal, also a complete wipe/reinstall. I hope I have better luck with 10.04 or I'm ringing the bell on Ubuntu all together.
View 4 Replies
View Related
Apr 13, 2011
I just installed Ubuntu 10.10 tryed 11.04 but didn't work, but in both my internet connection was a lot slower than it is on windows. I can connect to the wifi but i get 1/10 of the speed that i usually do and it keeps losing the connection. I'm using a MSI computer with a "802.11bgn 1T1R mini Card Wireless Adapter"
View 9 Replies
View Related
May 11, 2011
I bought my wife a Compaq Presario CQ56 for Mother's Day, took it home and put Ubuntu 11.04 on it because she didn't like Windows 7 which was on it and love Ubuntu on the other computers in the house. Anyway, the wireless adapter, an rt5390sta isn't working and have tried downloading the adapter from the ratech web site and it will not compile. Anyone have any ideas on how to get this working. I tried another solution which was mentioned on the forums here of removing the options from the network manager in preferred applications and that didn't work either.
View 1 Replies
View Related
Jan 17, 2010
i was wondering how to get the above wifi card working as it is not supported.
View 1 Replies
View Related
Apr 19, 2010
I cannt get connection of my WIFI modem on UBUNTU 9.10(new installed) but it works on ubuntu 9.04(installed through WUBI.exe) without any driver. below is my lsusb report on UBUNTU 9.10
[Code]....
View 1 Replies
View Related
May 31, 2010
Yesterday while me and my friend were in the train, we tried to set up a wireless network and play frozen bubble. So one of us makes a new wireless connection, the other connects to it, but we observed this: When the creator of the wifi network opens the game and tries to start the multiplayer, it says that it cannot connect to the server. On the other computer there is no problem with it. We tried to change the host of the connection, but the result was the same (the host computer couldn't connect to the "server")
View 2 Replies
View Related
Jun 1, 2010
I've recently invested in a new netbook, a Zoostorm Freedom XL and decided to install the Ubunto Netbook Remix alongside the Windows 7 starter edition which comes preinstalled.Everything went amazingly smoothly, and I now have a 99% working system - the only issue is the wireless networking.The wifi adapter doesn't seem to be being recognised by the Ubuntu install at all, to the extent that even using the wifi hotkey the wifi indicator does not come on and I cannot access wireless networks.
I've done a bit of reading, and it seems that ndiswrapper may be the solution I'm looking for, however I'm not entirely sure how to go about implementing this.The network card, in Windows, is simply recognised as "802.11n Wireless Lan Card" and the device manager properties suggest it's manufactured by Ralink and using driver version 3.0.8.0.
View 4 Replies
View Related
Jun 3, 2010
Installation was flawless. My WiFi router is up and I'm able to connect my Windows laptop. Once I login to Ubuntu, WiFi doesn't even start to scan and even if I go into 'network connections' to add the SSID manually, no luck. I just get the notification that I'm not connected, no other errors.
[Code]...
View 4 Replies
View Related
Jul 3, 2010
I've been running ubuntu on my Asus 1001ha netbook for half a year or so. I ran Karmic for at while, wifi working and all, accepted the recommended updates when Update Manager popped up and everything was fine until one day I let Update Manager do it's thing and my wifi stopped working.. Lycid had just come out that same week, so I thought "screw it" and installed 10.04 instead..
So I've been running 10.04 for a couple of months now, everything working fine, including the wifi - until today.. Update Manager suggested some upgrades, I accepted and *pouf* my wifi is gone again..
That's the second time Update Manager knocks out my wifi, any way to roll back todays update or how to the the wifi working again?
View 9 Replies
View Related
Sep 6, 2010
I've recently installed Jaunty on my Acer 5920 and I'm in love. Yet I can't get the wifi to work with my pathetic mortal knowledge of gnu/linux. Every time I enter the password to log into my wifi router it immediately asks me for it again not accepting it and I don't have clue what to do about it. I'm using a Acer 5920 with a Intel PRO/Wireless 3945ABG card
View 2 Replies
View Related
Sep 18, 2010
I've bought a Asus EEEpc 1005 PX and trired to install Ubuntu netbook. But I found that wifi is not working. It's not detecting the wifi cards.I tried ifconfig, and it is showing me,When I tried LSPCI it's showing me
Ethernet controller: Atheros Communications Atheros AR8132/L1c Gigabit ethernet adapter (rev c0)
Network Controller: Atheros Communication inc. Device 002c (rev 01)
how can i set up the wifi here.(I tried with Meego, and Meego detected the wireless autometically..But I want to use Ubuntu)
View 8 Replies
View Related
Oct 11, 2010
I have a laptop that was working fine with 10.04 LTS. Today, I did a full 10.10 install and now my wireless is not working. Thinking it had to do with 10.10, I did a full install back to 10.04 LTs. Wireless is still not working. I tried installing the driver for my laptop's internal wifi using ndiswrapper, but that didn't work either. I have another laptop that is identical to the non-working one, with the exception that it is running a Celeron processor and non-Nvidia graphics. Otherwise, they are identical with respect to the wifi adapter. The Celeron machine is giving me absolutely no problems.
View 9 Replies
View Related
Nov 26, 2010
I installed ubuntu 10.10 on my Compaq C700, but when I started it up, I am unable to enable wireless. While reading through other boards, it is apparently common for this computer. However, I have not seen anyone address how to enable wifi on ubuntu 10.10.
View 1 Replies
View Related
Apr 15, 2011
i am getting some troubles with WiFi. I got a Lenovo G550 with a BCM4312, at first i found some troubles making it work but i managed to find a proper driver and it is working "fine" Every 5 minutes or so my WiFi freezes and internet stops working. I don't get disconnected from the network, but until i don't reconnect to it, internet will not work.
Rare thing is, i realised that this happens ONLY when my notebook is plugged in. When it's working on battery, this does not happen. If i use it on battery it works for 30-40 mins (or more) and 3 minutes after i plug it in, it just stops working. I'm using Ubuntu 10.10, if there is any information i could give, just tell me. I also have a Windows partition and this does not happen there, either plugged in or on battery.
View 3 Replies
View Related
May 27, 2011
after upgrading to 11.04, I can't use the fn-f2 combination anymore to activate the wifi card. I'm using a Dell latitude laptop. Wifi is functioning normally when it's on and I can even turn it off with the hotkeys. When I try to turn it back on, the light goes on for a second and than dims again. I than have to reboot into Windows to get it back on, which is kind of annoying.
View 2 Replies
View Related
Jun 28, 2011
Suddenly my wireless card isn't coming up automatically.The following sequence fixes it:
Code:
ifconfig eth1-eth0 up
killall NetworkManager
[code]....
View 2 Replies
View Related
Jul 6, 2011
I got my wifi working about a month ago, I have an HP Pavilion dv8000 with a broadcom bcm4318, it worked fine until I updated my system and rebooted, now I can only use my ethernet
View 5 Replies
View Related
Jul 11, 2011
Working with a Dell Inspiron 6000 and installed Ubuntu 10.10 just to get familiar with some form of Linux. The wireless card is Dell's 1470 and the chip on the card is labelled BCM4311 so that's what I went for. At first it showed an unconnected wired NIC and for wireless it said "no firmware", but now it doesn't say anything about either one of them, it says "no network devices available". I followed the instructions here [URL] for both "STA - No Internet Access" and "b43 - No Internet Access" and when it says to go to the additional drivers menu to enable the new driver, there's nothing on the list. I then tried [URL] that guide and [URL] that one. Don't say things like "just run a qf13 on the PCL so the ergotron bus will be cleared, it's probably a thermawhatsit in conflict with the meatloaf kernel" as I won't have a clue how to execute said instruction. More useful would be "open a terminal and type 'ireallyenjoynewcarpetting' then check if the output says 'blargh 010101' ".
View 9 Replies
View Related
Jul 25, 2011
I have a Broadcom BCM4318 that isn't working with the B43 or the other (I tried installing both and while they supposedly installed successfully, neither shows up in the Additional Drivers tab for me to enable.) I tried using both sets of directions stickied up at the top of this forum. Neither seems to be working for me (no guarantees on whether I did it right) though the B43 is apparently the one I need.Disclaimer: I'm a total newbie to using command line and a new convert from Windows so I'm rusty at navigating and making things work, though things are finally starting to make a little sense after two days of hacking at it.
View 5 Replies
View Related
Aug 4, 2011
I have new emachine 1401 and I can't get it to connect to wireless. It does detect networks but when connecting keeps asking for password over and over and never connects. I don't have wired connection at all and the wifi router is not managed by me, so I'm retyping output through my windows xp samsung netbook which works over the same wireless network...
I have tries some other solutions I found around here (install bcmwl-kernel-source, rt3090-dkms_2.4.0.4, blacklist rt2800pci...) so it's not original configuration but behaves exactly the same.
[Code]..
View 2 Replies
View Related
Jan 7, 2010
Finally took the plunge and upgraded my ubuntu studio to karmic from jaunty. I seem to be experiencing a problem many have, being that my wifi card (edimax) which worked on my previous distro is now not working at all. I've done a lot of research and found the problem seems to mainly be with broadcom cards, and have tried a number of things relating to those that have worked for others, with no luck.
My problem seems to be not that the drivers wont activate or anything like that, my problem is that under hardware drivers nothing appears at all. I have no drivers present, where most people are talking of 3. i have not found anyone else with this problem. My problem is compounded in addition by not being about to use a wire connection at all.
View 3 Replies
View Related
