Ubuntu Networking :: Getting The 3Com 3CRGPC10075 Wireless Card To Work
Apr 12, 2010
I have looked for information regarding this card. I have tried to install it using ndisgtk and ndiswrapper. I have the green light on the card but it won't work. When I have tried using ndiswrapper to install this card, I can get the driver to install but then the instructions say to type the following line which I do, but then it gives me an error message:
sudo modprobe ndiswrapper
The error message is:
WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
View 9 Replies
ADVERTISEMENT
Jun 24, 2010
I am trying to get an old IBM 600e to work with Centos 5.5. The install seems to have gone well but I am struggling to get any networking support. I am concentrating on a 3Com 3CCE589EC card which seems to be on the supported list. It works fine under Windows 2000 on the same computer so I believe the hardware is OK. When I insert it the following messages are shown in /var/log/messages:
pccard: PCMCIA card inserted into slot 0
pcmcia: registeing new device pcmcia0.0
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use
0.0: RequestIRQ: Resource in use
Am I likely to have an easier time with a different card and if so which?
View 3 Replies
View Related
Aug 21, 2010
I'm running Ubuntu 10.04 Server. I can't get my Wireless Card & Wired Card to work at the same time. My interfaces file is incorrect, when I comment out 1 of the interfaces the other works. I have attached my interfaces file.
View 2 Replies
View Related
Mar 30, 2010
I have a dell 1521 and I can't get internet working, I thing the driver is no working with ubuntu 9.10
View 1 Replies
View Related
Jan 26, 2010
I have been messing around with ubuntu for a few hours now trying to get my wireless driver to work, but I am having no luck. It seems like I installed the driver right, and network-admin use to show the wireless, but I couldn't unlock it to mess with properties. Now it doesn't even show wireless, and I still can't unlock it, so I'm unable to get my wireless card to work.
View 9 Replies
View Related
May 27, 2010
I have a Dell inspiron E1705 that I recently installed 10.04 LTS on. The wireless card i'm using is a Belkin express card that worked perfectly fine with 9.1 but won't work with 10.04. lspci -v output shows the card as installed with a driver listed but under capabilities is says "access denied".
View 9 Replies
View Related
Feb 13, 2011
I've just loaded ubuntu to give my old laptop a new leece of life. Everything is fine expect that I can't get the wireless card to work. It just doesn't seem to be exist on my computer anymore. The computer has a button to turn wireless on and off, which worked when it was a windows system, but doesn't seem to do anything anymore. I'm an absolute ubuntu beginner.
View 8 Replies
View Related
Jan 24, 2010
I know some wireless card can work in Master Mode but it seems use madwifi driver. I know madwifi doesn't support usb dongles find a usb wireless card which can work as AP under Ubuntu. I have check this list [URL] I am not sure if ar9170usb.ko and its device support Master MOde.
View 6 Replies
View Related
Nov 9, 2010
my wireless card is linksys wusb54g V4 . it work fine in ubuntu 10.04 but when I update to 10.10 , it dose't work.
the problem is : I can find some AP by it , but i can't connect
View 2 Replies
View Related
Mar 14, 2011
System: HP Vectra VL Ubuntu Version: 8.10,
lsusb Bus 001 Device 003: ID 0846:9020 NetGear, Inc. Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub,iwconfig lo no wireless extensions.
[Code]...
View 3 Replies
View Related
Jul 10, 2011
I have installed Ubuntu 11.04 and for several days have tried many, many different ways of installing my Linksys WPC 11 wireless card into my IBM Thinkpad T30 laptop.
I have got the wireless working by installing Ubuntu 8 and then upgrading to the current version, and I would assume some drivers are currently installed.
As usual though, the signal drops out after only a few minutes and I have to keep re-booting the laptop to continue what I'm doing.
View 7 Replies
View Related
Jun 13, 2010
I just bought a USB thumbdrive and I installed Ubuntu on it. I want Ubuntu to connect to the internet with virtually any computer that boots from the USB. Is there a single package that will install drivers for nearly every wireless card there is so that I can connect to the internet with out a hassle?
I noticed that the Linux Mint website lists support for more wireless cards as a feature and I am curious whether I can do this for the Ubuntu on my thumbdrive.
View 2 Replies
View Related
Sep 12, 2010
I have a Toshiba Satellite series laptop, i get ubuntu on it, all works well but there's a problem, my wireless card doesn't work, it doesn't show me the aviable wireless network, my Wireless Card is an Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) but it works in windows. I used Ubuntu 8.04.4 LTS. When i run these codes that's what it shows:
[Code]....
View 4 Replies
View Related
Oct 20, 2010
I have an issue with wireless connectivity on my laptop. Its a HP dm3 and the intel network adapter is supported as I can scan and detect wireless access points.However, when I attempt to connect to my home network, it fails and this is probably a result of two things: The BSSID is missing and/or the DHCP client ID is missing.I am running Kubuntu 10.10 32 bit
View 2 Replies
View Related
Oct 22, 2010
Yes, that's correct, it's a Celeron 400 running Xubuntu. And the card was working on 9.10, but not working anymore in 10.04 neither in 10.10.I've no other idea and I'm really considering moving back to 9.10Is there anything else I can check.
View 6 Replies
View Related
Mar 31, 2011
I been having trouble getting my rt2070 wireless usb card to work on my desktop. I am using Ubuntu 10.10.
[URL]
Pastebin of dmesg: [URL]
Code:
Representative portion in case pastebin wipes this entry:
[ 234.984025] hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
[ 234.984041] hub 1-0:1.0: unable to enumerate USB device on port 8
[Code].....
View 9 Replies
View Related
Aug 19, 2011
My laptop is an Amilo a1650 on which I've very recently installed Ubuntu 9.10. It's worked out fine so far, except that I can't get the wireless card to work. It's an internal Broadcom BCM4318. Where do I start with configuring it?
View 7 Replies
View Related
Feb 20, 2010
I can't get my wireless card to work. I downloaded a broadcom driver for it and i do believe its the right one, but its not helped. I'm running mint 8. The information on my internal wireless card i got using the terminal is:
lspci
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
[Code]....
View 2 Replies
View Related
Jun 26, 2010
I'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:
Code:
$ sudo iwconfig wlan0 essid "apoint" key s:my_key_8
this error is returned:
Code:
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.
View 2 Replies
View Related
Jul 2, 2010
I have been trying to find a wireless card that will readily work with Ubuntu 10.04 Desktop. Preferably an +802.11 N with an indoor range of between 300 to 400 ft. with possibly two antennas. Am finding many that say linux on the box but find that it ain't so. Also most times with no instructions or very convoluted process that results in errors.
View 1 Replies
View Related
Sep 7, 2011
I installed Fedora 15 64 bits version on my desktop, and I'm having hardtime activating my wireless card.
I tried following the instructions from this thread without success [url]
Here are the logs of some of the commands I used
lspci output
Code:
iwcconfig
Code:
Code:
View 1 Replies
View Related
May 19, 2010
Running OpenSuSE 11.2 32 bit dual boot with XP. 3Com OfficeConnect Wireless 11g USB dongle connects and works happily in XP. Can not get it to associate with the same AP in Linux.
Device identified as:
Device 3CRUSB10075 wlan0
Driver zd1211rw
Appears to be installed, to the extent that it sees the broadcast SSID. Output of /usr/sbin/iwlist scan correctly identifies the ESSID and encryption (disabled) More particularly, /usr/sbin/iwconfig outputs that the "Access Point: Not-Associated"
linux-tgb6:~ # /usr/sbin/iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code].....
View 1 Replies
View Related
Jun 8, 2010
Under ubutntu 10.04 I'm unable to acces the config page 192.168.1.1 the browser just won't open th page (and I have Internet as I'm writing this right now).
View 9 Replies
View Related
Jul 5, 2010
I trying to make my ubuntu 8.04 working with an Hardware modem 3com us robotics message modem. Is there any manipulation to do? My objective is to install an Hylafax server on this ubuntu ( already done), but no modem is recognized.
PS: my computer doesn't have any internet connection
View 1 Replies
View Related
Mar 16, 2009
I have a Dell inspiron 1420 and its set up as a dual boot. Windows/Fedora.I cant get the wireless card to work. I review some previous posts but still cant get it working.
I did a /sbin/lspci
Network controller: Broadcom Corporation BCM4310 USB Controller (rev 01)
I did $rpm -q b43-fwcutter
b43-fwcutter-011-3.fc9.i386
View 14 Replies
View Related
Jul 26, 2009
I have a laptop with ubuntu installed. But I cant get the wlan to work. When I had vista on it I had to use a combination on the keyboard to "activate" the wlan. ( FN - F1 ). But on ubuntu this wont work. Ubuntu don't recognize this function because it was made especially for my computer. In the trobleshooting guide of wlan point 5.2.1 it says that I have to activate the card from windows. But I dont have windows on the computer anymore, even if I had it would just disconnect when booting to linux. How can I activate my wlan card without windows, or the Function keys? (ubuntu have the driver) it only says that its "Disabled".
View 9 Replies
View Related
Dec 4, 2010
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
View 6 Replies
View Related
May 12, 2011
I am trying to fix someone's computer, and the wireless card will not work! Two proprietary drivers show up on the "Additional Drivers" program, but every time I go to download and install them, I get an error message right before it finishes, and I still cannot use the card. I am using Ubuntu 10.10 Desktop
View 9 Replies
View Related
Feb 23, 2010
I'm looking for a wireless card that will work out of the box with Ubuntu 9.10. It has to be a pci card. I purchased a Edimax EW-7128G which the reviews said was a great card for linux but was DOA. I could have it replaced or get a different card.
View 1 Replies
View Related
Dec 31, 2010
I have lenovo thinkpad, T61 with Intel 4965AGN wireless card. It is a N card, it works under N mode in windwos, but not in Ubuntu (10.10). I installed ndiswrapper and got the windows xp drivers for this card. the issue is that i got an error when installing the drivers and since then I cannot use wireless.
The error i got is: Code: Module could not be loaded. Error was: FATAL: Could not read '/lib/modules/2.6.35-24-generic/kernel/ubuntu/ndiswrapper/ndiswrapper.ko': No such file or director I unistalled the driver, but now under network connections no wireless connections appear, nothing. I cannot use wirless anymore.
View 9 Replies
View Related
