Ubuntu Networking :: 10.04 & Intel 4965 Wireless - Can't Ping The AP Or Any Other Computer On The Network
May 2, 2010
Installed Ubuntu 10.04 on my Sony UX280p with Intel 4965 wireless. Ubuntu detects the card without issues (as far as I can tell). I can see all access points in my area and select my access point and pair with it. I get a DHCP address from the AP (if ifconfig is to be believed) and iwconfig shows the ESSID of my AP but I can't ping the AP or any other computer on the network, nor can I ping the sony from any other computer on my network. Last year I had installed 9.04 on this computer and wifi worked out of the box without any issues.
View 2 Replies
ADVERTISEMENT
Jan 19, 2010
After wading through all of the bug reports filed regarding the Intel 4965 AG wireless adapter, trying various suggestions and not finding any solutions to my problem, I've finally decided to scrap the idea of actually being able to get my Toshiba laptop to connect reliably to my wireless network with Ubuntu 9.10. This wireless adapter worked absolutely flawlessly with 8.04 Hardy. I took the plunge once again this week and thought I'd try again to get 9.10 working on my laptop but it's a no go with the Intel wireless adapter (same problem with 9.04, it just doesn't work). You would think with newer versions of drivers and kernels that the same hardware that worked in a previous version, would continue working with newer versions.
Anyway, enough of my frustrated ranting... I need to find a replacement wireless adapter for my laptop that WORKS FLAWLESSLY with 9.10. When I say flawlessly, I mean you plug it in, boot up the laptop and it works all the time, every time. No fooling around with drivers etc... Either a PCMCIA or a USB wireless adapter that is currently available for purchase. I've waded through the sticky on the forum about which adapters are supposed to work, but I'm really hoping that someone here is using either a PCMCIA card or USB card and could please point me in the right direction. It's kind of funny, I purchase my Toshiba laptop because I read reviews here in the forum about how great it worked with Ubuntu 8.04. How all the hardware was recognized and worked out of the box. It did... with 8.04. Everything still works with 9.10 except the wireless.
View 9 Replies
View Related
Oct 8, 2010
trying to connect wireless on wlan0 intel pro wireless 4965 AG or AGN
View 1 Replies
View Related
Jan 16, 2010
what is really a rant disguised as a question, but does anyone have this combination working? My NetGear router shows the connection as allowed from the MAC address in the router logs, And I can see the network I want to join in the list of visible networks from the laptop, but dmesg shows Ubuntu disconnecting with
WPA-PSK [TKIP] only:
wlan0: disassociating by local choice (reason=15)
WPA-PSK [TKIP] + WPA2-PSK [AES]
wlan0: disassociating by local choice (reason=3)
I'm sure there is a simple explantion that has been sufficiently buried somewhere but after several hours of googling and searching the forums here I can't find it. Anyone want to help out an old man RTFM?
I'm getting really disappointed here lately - things are getting worse, not better. In my case in particular I have this laptop with supposedly open and supported drivers and they don't work, however, the exact same distributuon on a Dell D830 with a broadcom NIC does. under 8.10 and 9.04 this worked out the box - just logged in, gave the PSK and away we went. I can't see the attachment I just uploaded so to include the information requested in the "how to get help" post, I'll put it all here inline...
Code:
Machine Brand and Model (PC/Laptop): Lenovo R61
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
[Code]...
View 1 Replies
View Related
Apr 1, 2010
I have been getting from my wireless adapter. This has been going on for quite some time but only now am I able to see a pattern. The behavior seems to be the following: Start up, connects to network and work fine until I suspend my machine. On wake up, it works again but after a seemingly random amount of time the connection is lost and I can no longer find any networks. Attached is dmesg output after startup and connecting to a wireless network (dmesgAfterConecting.txt) and the same after the connection has been lost (dmesgAfterConnectLost.txt). I get this error which seems important:
[Code].....
View 1 Replies
View Related
Jul 22, 2010
I am new to Ubuntu and I have problem with wireless connection. I could not find any wireless connection at all. I am now using wired connection. Sony Vaio SZ series, Intel Corporation PRO/Wireless 4965 AG or AGN My software details are:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 1 Replies
View Related
Aug 26, 2010
A few months back, my Lenovo IdeaPad Y510 stopped connecting to my wireless network after coming out of Suspend (it had worked fine previously). Wireless networking is simply disabled, and I have to reboot in order to get it back. I tried upgrading my OS from Intrepid all the way to Lucid, but the problem persisted. I also tried changing my 00sleep_module as suggested in this thread, but to no avail.
[Code]...
View 4 Replies
View Related
Oct 23, 2010
My wireless worked out of the box for the past few months. When I was running low on battery recently, I put the laptop to sleep. When I woke it up, there was a black screen with a flashing underscore. I pressed a bunch of buttons but nothing happened. Then suddenly it said something about a wireless hardware error and I did a hard reset by holding down the power button. When I turned the computer back on, wireless was greyed out. There's no hardware switch to enable and disable wireless and the software switch had no effect. I tried echoing into the 'state' of the adapter but it didn't let me. When I tried sudo ifconfig wlan0 up it gave me the following error:
Code:
SIOCSIFFLAGS: Unknown error 132
lspci:
[code]....
View 2 Replies
View Related
Feb 17, 2011
I am running openSUSE 11.3 updated with all the latest patches and I cannot connect to my wireless router. I am running Linux Mint 10 on the same type of notebook HP Compaq 6910p and it worked right after the install. If I take off the security WPA & WPA2 Personal I can connect. lspci -v | less shows this for my wireless card.
10:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1000
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at e4000000 (64-bit, non-prefetchable) [size=8K]
[code]....
I am using the same settings for both notebooks just can't figure out why openSUSE 11.3 won't connect. I get the prompt to key in my password, I've even checked the box to show password to make sure I was keying it in correctly. Everything was good but it just goes right back to the password prompt after it fails trying to connect.
View 3 Replies
View Related
Aug 27, 2010
I've been trying to install the linux driver for my wireless car which is an 'Intel wifi link 4965'. I've followed the literature that Intel provide but I keep running into errors.
(I downloaded the driver from[intellinuxwireless.org/?n=downloads)
View 5 Replies
View Related
Aug 10, 2010
I have been trying to get my laptop to share its wireless connection to my older, wireless-less, computers through its ethernet port. So far, I have not been able to make it work. As far as I know, what I am trying to do is called network bridging. The method I have been trying so far is to run these commands as root:
Code:
ifconfig wlan0 -promisc
brctl addbr br0
brctl addif br0 wlan0
brctl addif br0 eth0
ifconfig br0 up
Each time I do this, the system running as a bridge loses connection, and the system being bridged to never gets a connection. My hardware is:
Code:
08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
View 3 Replies
View Related
Apr 1, 2010
kernel-2.6.32.10-90.fc12 seems to break 802.11n with my intel 4965 chip on my thinkpad t61p. Anyone else seeing the same thing? iwconfig shows extremely low bit rate. dmesg doesn't show anything at all unusual.
View 10 Replies
View Related
May 6, 2010
I upgraded to OpenSuse 11.2 and just about the only thing that doesn't work is my wireless internet. From my research, I should be using the iwl4965 or iwlwifi driver; however my system seems to be running iwlagn. I have no idea how to switch it as neither of the correct drivers can be found in my yast, and I've failed to find any information about this on the Intel® Wireless WiFi Link drivers for Linux* website.
View 9 Replies
View Related
Feb 18, 2009
I've only used Linux for about a year or two now and have worked through suspend esume and WPA wireless issues with CentOS and my T61p. However, I'm stumped on this one. why my T61p freezes randomly (happened once while writing this topic) with the caps lock light blinking. I'm wondering if it has something to do with my nVidia driversettings andor using my wireless card and/or switching between home wwireless and work wwired connection.
[Code]...
View 11 Replies
View Related
Jul 20, 2010
I am using "ping" on 2 computers on the same wifi network.One of them shows a bigger delay than the other consistently.I am trying to find out what may be the problem.. Can someone suggesta way to investigate this issue or isolate the problem?Both of them sending "ping" at almost the same time.First laptop (much newer laptop model)
Code:
PING www.l.google.com (64.233.181.104): 56 data bytes
64 bytes from 64.233.181.104: icmp_seq=0 ttl=48 time=1011 ms
[code]...
View 2 Replies
View Related
Mar 18, 2011
I have just started with Slackware and I have a problem with my wifi. I don't know if I should make more changes to any archive but when I try to start my wifi it doesn't work at all. What I should do? take into consideration that I come from Ubunut, where everything is done beforehand.
View 6 Replies
View Related
Jul 24, 2010
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
View 7 Replies
View Related
Jun 6, 2011
Since an upgrade from 10.10 to 11.04, all wireless devices for me in the plasma network manager applet are not functioning properly on a Dell Latitude E4310. Specific problem: No wireless networks appear in the plasma network manager applet. Manually-configured networks do not connect. A separate CDMA card appears, but cannot establish a connection. The CDMA card does function on 10.10 machines, and formerly worked on this machine. The only wireless 'network' that appears in the plasma network manager widget is 'hidden network'. Manually adding a network and checking "Connect Automatically" does nothing. I attempted a fresh install after the upgrade itself failed the work. There are no networks to click on, and selecting the device itself merely shows the status page.
Further information
iwconfig output:
Code:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key: off
Power Management: off
rfkill output:
Code:
0: dell-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: dell-wwan: Wireless WAN
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
dmesg output:
Code:
dmesg | grep iwl
[24.292605] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[24.292610] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[24.292687] iwlagn 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[24.292696] iwlagn 0000:02:00.0: setting latency timer to 64 .....
Here's the CDMA-specific dmesg output:
Code:
[17846.948253] usb 2-1.1: new full speed USB device using ehci_hcd and address 7
[17847.060342] sierra 2-1.1:1.0: Sierra USB modem converter detected
[17847.060650] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB1
[17847.060765] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB2
[17847.060838] usb 2-1.1: Sierra USB modem converter now attached to ttyUSB3
Neither the CDMA card nor any wireless networks are working. If I take the exact same machine and boot from a disk with 10.10, both work.
View 2 Replies
View Related
Jul 6, 2009
Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) is not working on centos5.3
# uname -r
2.6.18-128.1.16.el5
# lspci | grep Wireless
0b:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
[Code]....
View 3 Replies
View Related
Jan 21, 2011
Ive installed Ubuntu recently but none of my attempts to get the wifi network working were successfull. It establishes connection but the indicator shows no signal and I cant connect to any website, I tried pinging external IPs etc. None of these worked. lspci -nn | grep 'Wireless Brand'Does not show anything. I could find 03:00:0 Network Controller: Intel Corporation Ultimate N WiFi Link 5300 lsmod | grep "wlan_module_name"Doesnt show anything. Restarting network says only: *Reconfiguring network interfaces... Kernel boot messages:
[Code]....
The network Im trying to connect to is hidden, so I have to input SSID manually, I doubt this causes the problem.
View 2 Replies
View Related
Jul 28, 2011
Hey I just installed linux on my computer and it will not connect to any wireless networks, it will detect them and say try to connect but for some reason wont. It does connect just fine to a wired network.
View 1 Replies
View Related
Mar 20, 2016
My Lenovo laptop has an Intel Pro 4965 Wifi adapter,here is the "lspci" detection:
03:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
So installed the needed "firmware-iwlwifi" kernel module, which is a correct kernel module for this adapter.
Then "modprobe -a iwlwifi"........no complaints !
However,
#iwconfig wlan0
wlan0 No such device
and
# lsmod |grep iwlwifi
iwlwifi 87219 0
cfg80211 350041 4 iwl4965,iwlwifi,iwlegacy,mac80211
The wired ethernet is working fine
ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:1e:37:82:ac:72
inet addr:192.168.1.16 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:37ff:fe82:ac72/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code] ....
when I go to "Preferences" "Network Connection" ' "Add" "WI-FI" "Create" "Device MAC Address " box is empty.......no Wi-Fi adapter detected !!!
View 7 Replies
View Related
May 11, 2011
unreachable computer's ifconfig reports xxx.xxx.xxx.37 but when I ping that address from another computer it says "Destination Host Unreachable" (all the other computers on the LAN can ping each other except this one particular computer)I can ping other computers from the unreachable computer just fine...
View 9 Replies
View Related
Feb 22, 2010
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies
View Related
Apr 8, 2010
I clicked "Network Settings", and I found that the ip address was wrong, which is "192.168.1.10/24", and netmask field is empty, so I modifed the configuration file located in /etc/sysconfig/network, named ifcfg-wlan0, added one line(NETMASK= '255.255.255.0'), saved it and reboot the system. After rebooting the system, I still found the ip address is wrong and netmask field is empty, so I have to use ifup command to activate my card manually every time the system starts.
View 1 Replies
View Related
Feb 23, 2010
I have an old computer I have set Ubuntu up on to use it to learn about web services, networking and sys admin.As a first step I have installed the LAMP packages successfully. I want to reach my ubuntu computer from my laptop through my home wireless setup.
On the server I open a browser put this in the address bar and get to the "It works!" page so assume its correct.I go to my laptop, put the same number in the browser and am told that there's a problem loading that page.I figure ok, could be security or ports or something so i ping it to see if it work on that level and it doesn't.I go to my laptop, get the ip for it and then try to ping from ubuntu to my laptop - that doesn't work either.Pinging the router from both computers works fine though.What do I do now?
View 4 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Apr 30, 2010
I installed Fedora 12 on my laptop. I have a wireless connection to the internet that works fine, I attached an Ethernet cable from this laptop to a windows machine. There is a green light.
I can ping my localhost. I can ping the windows machine using it internal IP address via the router. However, the eth0 IP address does not work when I ping to it from the windows nachine. Also, I cannot ping to the windows machine using the IP address associated with the Ethernet connection.
View 4 Replies
View Related
Sep 20, 2010
I have a desktop computer (Ubuntu) connected to one of the LAN ports of the Cradlepoint MBR1000 router via an Ethernet cable. I also have a Verizon mobile broadband USB modem (USB760) plugged into the USB port of the Cradlepoint router.I also have a laptop (Ubuntu) with a wireless wi-fi adapter (802.11g). The laptop also has an Ethernet card but I'm not using it. The desktop computer does not have a wi-fi adapter, only the laptop does.
With the above setup, I have Internet access to both the desktop computer as well as the laptop computer, which I am well pleased with.Is there a way I can have file sharing between the desktop and the laptop, or at least ping between them, the way I have it set up? I can't use the ad-hoc method because for that to work each computer needs a wi-fi adapter. The router is using DHCP but can also be configured manually.
View 14 Replies
View Related
Mar 1, 2010
I have been trying (unsuccessfully) to remote access my girlfriend's Ubuntu machine to fix a few things. The problem is that she lives in Japan and I live in RI, USA! Is it even possible to ssh or Remote Desktop her computer with such a high ping rate? (average ping time is 300ms) If so why can I not connect?
View 2 Replies
View Related
