Ubuntu :: Murmur Server On = Error On Start Up?
Sep 7, 2010
I've tried searching everywhere and I can't find any detailed help on setting up my murmur server. This is my first attempt doing anything within Ubuntu.Here are my issues:I'd like help with the murmur.ini setup. I'm having a hard time getting the server to start up in Ubuntu. I have a wireless router in the mix as well. It looks like I can get the SuperUser password set and have murmur see the correct ini for it's settings, but I get an error when i finally try to start the server. The error says:
"Server: TCP Listen on xxx.xxx.x.x:64738 failed. The address is not available"I'm confused as to what IP I need to point murmur to. I've tried a bunch of IPs with nothing working.Should I be using the IP of the server (the laptop I'm running murmur on)?Should it be pointing to the IP of the wireless router (192.168.2.1) that connects the server (laptop) to the internet?Should the IP be the dynamic IP that I get from my ISP? Here are the lines of code from the ini file: # Specific IP or hostname to bind to. If this is left blank (default), murmur will bind to all available addresses.
host=My ISP gives me a dynamic IP but I'll deal with DynDNS later if I want the server running 24/7. For now I just want the server to start up and be able to get to it from Mumble.I'd like to know what PORT to bind it to. I read that 64738 is the default port that murmur uses, but then I read something about ICE needing murmur to use port 6502.Now I'm confused. I've tried both with no success. I have no idea what ICE is or how it affects murmur. The ICE line in the ini was commented out, so I don't know if that's an issue or not. Here is that line of code from the ini for the port:# Port to bind TCP and UDP sockets toport=LASTLY, here is how I'm starting the server. Maybe I'm doing something wrong there. In the terminal screen in Ubuntu I type:
View 3 Replies
ADVERTISEMENT
Jan 13, 2011
I have trouble with installing mumble-server.I found mumble-server-1.2.2-2.1.i386.rpmbuthttp://img502.imageshack.us/img502/3421/termm.jpg
View 2 Replies
View Related
Jun 29, 2011
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
View 2 Replies
View Related
Mar 15, 2011
I am just starting to use fedora as I'm on compsoc committee at my uni, and need to be able to use the server which runs it. Am trying to get a mumble server running (just on my laptop with a fedora 14 install) And am really struggling, can't get the stuff manually and do it, as it says it depends on some other packages which I can't find in the package manager, and if I just use the murmur package in the manager, then it doesn't seem to install, and even if it does, if I try to run it, it says the database is not writeable
[URL]
View 14 Replies
View Related
Apr 29, 2011
when i start qmail seervice it gives error#/etc/init.d/qmail startStarting qmail-toaster:
svscansupervise: fatal: unable to acquire pop3/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire pop3-ssl/supervise/lock: temporary failure
View 9 Replies
View Related
Mar 3, 2011
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
View 1 Replies
View Related
Aug 13, 2010
I have SUSE Linux Enterprise Desktop 10 running on HP Mini 2133. It's been working like a dream since I got it, but one day I got the following error message when booting it: Failed to start the X server (your graphical interface). It is likely that it is not set up correctly. Would you like to view the X server output to diagnose problem? <Yes> <No>.
X server output says alot of things, but I think this is the most important:
(==)Using config file: "/etc/X11/xorg.conf"
ACPI: OSPMOpen Called
ACPI: Opening device
(EE) VIA(0): No valid modes found
I then get the login:. I'm able to login, but I have no clue on what to do. How can I fix this?
View 3 Replies
View Related
Oct 25, 2010
I have installed Oracle VM in physical server of RAM 32GM Now I have installing 2 VM in it. One of 8GB and other one 16 GB of RAM. First I have installed 8 GB its running fine. But when I m going to install 16GB RAM size server then its showing error message
Error : Start - /OVS/running_pool/37_ABCVM001 PowerOn Failed : Result - failed:errcode=20000, errmsg=No enough memory to run vm(/OVS/running_pool/37_ABCVM001), required memory=16384.StackTrace: File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 124, in start_vm raise e
View 3 Replies
View Related
Mar 7, 2010
I installed Red-hat 5.3. Problem is that it is not showing graphical interface. Only kernel / command prompt is available. I tried startx, then I got this msg. No video BIOS modes for chosen depth. Also showing that:
ERROR: Failed to start X server.
View 2 Replies
View Related
Apr 8, 2011
When I started my session, a box saying: "An error occurred the startup of the Akonadi server. The following self-tests are supposed to help to tracking down and solving the problem. When requesting support or reporting bugs, please always include this report:
[code]...
What can I do to solve this problem?
View 2 Replies
View Related
Oct 20, 2010
So I am creating a LDAP server for my school's Linux lab, so users on our school network can log into the Linux machines.
I found a guide here url...Authentication
But during the install, I get the following error.
update-rc.d: warning: libnss-ldap start runlevel arguments (2 3 4 5) do not match LSB Default-Start values (none)
View 2 Replies
View Related
Jun 2, 2011
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
View 1 Replies
View Related
Nov 12, 2009
I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"
View 4 Replies
View Related
Jul 12, 2010
I used init 0 to make server shutdown,and replaced the power cord when I boot the server,it can't enter the GUI then I used init 5 and get the following message
Could not start the X server (your graphical environment)due to some internal error. contact your system administrator or check your syslog to diagnose. In the meantime this display will be disabled. Please restart GDM when the problem is corrected.
View 7 Replies
View Related
Mar 15, 2011
I'm having a very strange problem with red hat cluster. After testing it in the lab, I tried to install a new cluster and received the following error: cman not started: Cannot start, cluster name is too long or other CCS error /usr/sbin/cman_tool: aisexec daemon didn't start I've checked the internet for that error, but nothing. I decided to to take the example from cluster.conf man, which looks like that :
[Code]...
And still I get the same error. I can find my servers both from DNS (FQDN and short name) and they also appear in /etc/hosts.
View 3 Replies
View Related
Apr 4, 2011
I am very new to sendmail and I have tried all the way to configure the send mail but not succeeded with it.
Server info
Sendmail build /version
When I am trying to start the sendmail serving its throwing the error:
View 9 Replies
View Related
May 11, 2011
i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
View 5 Replies
View Related
Dec 9, 2009
I am getting this error
Starting web server: apache2[Wed Dec 09 15:36:40 2009] [warn] NameVirtualHost XX.XX.XX.XXX:80 has no VirtualHosts(99)Cannot assign requested address: make_sock: could not bind to address 68.178.232.100:80
no listening sockets available, shutting down Unable to open logs failed!
also what is 68.178.232.100
View 1 Replies
View Related
Aug 29, 2011
When I want to start nfs services ,I get this error, Starting NFS daemon: [FAILED]
View 1 Replies
View Related
Oct 13, 2010
Im trying to run synergy on startup. This works fine on the client, but it wont start automatically on the server. I put this line in an entry in startup applications:
[code]...
but still no dice.
View 9 Replies
View Related
Jun 7, 2010
I have setup a CentOS 5.5 server as a DHCP server. That will be it's only task in a Cisco callmanger VoIP environment The DHCP server that comes with CentOS 5.5 is from ISC V3.0.5 -redhat.
The server (HP DL360) has two physical NIC's of which only NIC1 is used (ETH0)
ifconfig shows:
Code:
The interface has a fixed IP setup.
My dhcp.conf file looks like this:
Code:
When I start (try to) dhcpd via the service interface or via the prompt as
Code: service dhcpd start
I get an [FAILED] message and the following is in /var/log/messages
Code:
But when I start the DHCPD on the comamnd prompt in debug mode it looks as follows:
Code:
and /var/log/messages shows:
Code:
Why does the system ask a declaration for eth0 0.0.0.0?
View 3 Replies
View Related
Sep 2, 2010
I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
View 3 Replies
View Related
Sep 8, 2010
I've been trying to install Ubuntu Server onto Microsoft Virtual Server at the request of my boss, and I've been having an issue I cannot seem to work around. Now my background on Ubuntu and linux in general isnt amazing, I have configured server at home to act as a file sharing platform and a media server, but thats about it.
Now I've gone to install it on the MVS at work and once the install completes, I recieve the following error: Hypervisor error.JPG
I've tried running the install but limiting the resolution, but from what I can rememeber server doesnt install the GUI to start with, so it should just be showing me the standard CLI.
View 1 Replies
View Related
Apr 10, 2011
I installed IBSng in ubuntu-server .but i can not start this server :Code:[root@myserver]# /etc/init.d/IBSng start.: 8: Can't open /etc/rc.d/init.d/functions"functions" file is in RPM base system . and ubuntu have not this file
View 2 Replies
View Related
Dec 6, 2009
I use FC8 and i want some services like HTTPD and NAMED to start at the start of the system , how to create a script to do that .
View 9 Replies
View Related
May 25, 2011
Fresh install, followed the directions,
# ./configure --with-mysql --with-openssl --with-openssl-libs=/usr/lib (MySQL 5.5.12 & OpenSSL 1.0.0)
Everything seemed to go well enough. Stock lighttpd.conf. However, it won't start on boot. Not even manually via:
# /etc/init.d/lighttpd start
or
# /etc/init.d/lighttpd -f /etc/lighttpd/lighttpd.conf (came across that while scouring Google).
No messages, no logs, nothing. ?
View 17 Replies
View Related
Apr 11, 2010
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
View 5 Replies
View Related
Mar 18, 2010
I am running CentOS 5.4 and Postfix. So when I start Postfix server than immediately maillog is starting to grow. And the first lines that I see in it are:
[Code]...
Server is already in several blacklists and I desperately need to do something.
View 12 Replies
View Related
Sep 9, 2009
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies
View Related
Nov 3, 2010
I'm trying to move a mysql 5.1.50-community InnoDB database from one location to another.When starting the service I get:Starting MySQL.Manager of pid-file quit without updating file [FAILED]I've searched for a way to do this but I can only find people who describe what I've just done.
View 6 Replies
View Related