my Logitech webcam C 200 under openSuse 11.2-2.6.31.5 appears as046d:0802, but in Skype I cannot see any image when testing the webcam. The correct audio input cannot be chosen either, it does not even appear in the drop-down box.I've installed the same webcam on a different machine with openSuse 11.2 and it worked out of the box, so I don't think there should be any additional driver required.
View 1 Replies
I installed Suse 11.4 on a compaq desktop computer. Installed a Logitech webcam. With cam programs like cheese, it is working fine. However, Logitech Webcam (C200) not working with Empathy.
Below some parts of the logfiles:
/usr/bin/lsusb: Bus 001 Device 006: ID 046d:0802 Logitech, Inc. Webcam C200
/usr/bin/lsusb -vv
Bus 001 Device 006: ID 046d:0802 Logitech, Inc. Webcam C200
Device Descriptor:
bLength 18
[Code].....
So for Christmas i got a webcam. And i knew it would be a fun challenge to get this webcam to work on a linux box. But i seem to have having way too much trouble. Yes i've tried spca5xx and Ov51x but neither of them seem to work.
I have got the:
Logitech Webcam C200
i bought this laptop for my parents to use with a webcam to communicate because i recently moved to another state. I have read that the logitech c200 webcam is compatible with my laptop, and should just install as soon as i plug it in. However, nothing happens when i plugged it in so i tried to install it from the cd. there is an icon that pops up on the screen when the cd is in, but goes away when it's removed. not sure what type of info you need. my system is linux mint 9 isadora.
View 8 Replies View RelatedSo i installed Linx 10.4, and attempted to get my webcam to work...
nothing at all!
It's a Logitech C200, webcam!
I'm using a basically vanilla Lubuntu 11.04 My Logitech E 3500 webcam works fine with Cheese. I have just installed Skype, but my voice isn't picked up on the test call, and no video either (the webcam light remains off). I've tried logging off and into Skype.
View 5 Replies View RelatedI am trying to get a Logitech Webcam (not Quickcam) Pro 9000 to work with my SUSE 11.2 installation (specifically trying to get it to work with Skype 2.1). I am using the KDE environment. I've been reading the many posts and seem to be getting the point that I need to install the UVC driver from the webcam driver repo. However, the link I found to the repo seems to be for SUSE 11.1...?
Anyway, here is what I have done so far:I ran the following commands and got the following output:
localhost:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 046d:0809 Logitech, Inc.
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
I'm trying to get my Logitech webcam to work. I don't know the exact model but it's a round globe.
Lsusb says-
Bus 002 Device 004: ID 046d:08f5 Logitech, Inc. QuickCam Messenger Communicate
I've tried Cheese, VLS but no video as of yet.
i am trying to video chat with my logitech C200 webcam but it does not work with skype or empathy. Do i need to download special drivers?. In skype i can't even test the camera. and with empathy the webcam icon and the video call option are grayed out. I downloaded "guvcview" from the software center and it works like a charm, i can capture video and take pictures, so i don't really understand why skype and emphaty dont work.
View 7 Replies View Relatedlogitech webcam pro5000 which does not work with my computer, the webcam does not work even if i plug it to different ports,especially when am using "skype linux beta",i tried searching for forums and threads and even videos but it seems my weak mind cannot absorb the technical explanations on the said sites,
View 1 Replies View Relatedwether the Logitech C270H webcam will work in 10.10. I don't see it mentioned in the approved list but the list is a bit outdated.
View 2 Replies View RelatedI'm having a confusing time with this webcam. When I plug it in, dmesg shows it is recognised and needs the module gspca_spca561
Code:
[ 6644.595789] usb 1-6: new full speed USB device using ohci_hcd and address 4
[ 6644.707379] usb 1-6: configuration #1 chosen from 1 choice
[ 6644.752736] Linux video capture interface: v2.00
[code]....
However, there is no result in skype, ekiga, or awetv, although the device /dev/video0 is created. there was a kernel update from Ubuntu 2.6.24-23-generic to 2.6.24-24-generic, and the webcam magically started working, using a different module, gspca. However, after some celebration, I found that my usb tv dongle, which uses the dvb_usb_af9015 module, ceased working.
I corrected this by recompiling the dvb_usb_af9015 module, using source from http://linuxtv.org/hg/~anttip/af9015/ ----after another celebration, I found that the webcam had stopped working again, and I have not been able to make it work since, despite recompiling the gspca module from http://mxhaard.free.fr/download.html. Attempting to insert the gspca module produced from this gives:
Code:
insmod: error inserting 'gspca.ko': -1 Unknown symbol in module Another thing I've noted, is that the gspca module will work when I boot into earlier kernels (eg 2.6.24-21-generic).
I have a webcam in my monitor (Acer H243HX). It is seen by the system (11.4):
Code:
> kernel - - - [302942.719649] usb 2-5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]...
So I have a Logitech 9000 web cam installed and working (again) with Skype. That's great when I want to video chat with family, but that's all I can do with it. I would like to record some movies using my web cam but I can't because of the following reasons:
1. I can't find an application for Linux that actually works. So far they all fail to work for a variety of reasons.
2. The ones that sort of work, don't allow me to do what I want, record a video with my web-cam and save the file for future use or distribution.
I just want a simple application that allows me to click on record, stop recording and save. Why isn't there anything around that can do that? Seriously, this is something I have been looking for since, 2001. And so far I have only found one application that kind of worked, but it's no longer developed and I can't find it anymore.
[Code]...
So let's recap. In another thread I am trying to get .wmv files to play (they work on one system but not another?) and none of the applications for web cams work as I want. Oh, and wine? It's a joke, not one application I have tried to run with wine works. The either just don's start OR they start but half the components never paint and it runs like a flea in frozen molasses.
I am a bit frustrated and rather tired of not being able to easily do what Windows folk can do with relative ease. Something wrong with that. And I haven't even begun to tack text to speech yet.
i have sony viao vgn-fz11 Can someone please help ,im new user to ubuntu been trying to get webcam working properly at the moment its upside down and does not work in skype at all just get black screen does this look correct? do i have the right driver?i will try and give as much information as i can.
View 1 Replies View RelatedI was having some issues with my old webcam and decided to just get a new one since my old cam was just that, old. Anyway, I went with a Logitech Orbit AF and it works as far as video goes but I can not figure out how to change the pan/tilt. I did not expect all the options of the cam to work but I figured I would at least be able to move the cam up since it is aiming at its lowest setting, which when using is around my chest. I have been searching around trying to find something that tells me what I need to do. From what I read, I think I need to change the settings of some functions called v4L2UpDownPan() and v4L2UpDownTilt() in luvcview, which I guess are in a file called v4l2uvc.c but I can not find that file. Is this what I need to do? Is that the file I need to change and if so, where is it? I just want to set it and leave it.
View 2 Replies View RelatedThey promise a lot for this camera: Full HD recording in 1080p, brilliant pictures with 10 MP resolution (2592x1944), Carl Zeiss optics, autofocus for 7cm and beyond .So I got this camera at a local shop and fired up guvcview. The camera produced a picture right away. An that's about the end of the success story.
After some unsuccessful attempts to focus on the building on the other side of the street I closed guvcview and started a Google search. It turned up the following message by kpeppard, "Support Specialist":
Also, our webcams are only made to go to a maximum 6 feet then it starts to get blurry. HD Pro Webcam C910 Focus Issue (MacOS) - Logitech Forums In fact the camera can focus down to a distance of about 4cm (better than they promise). But when the focus is set to the best possible "infinity" the image is in focus at a distance of 40cm. Anything further away gets blurry. I made all my experiments with the best possible resolution using fswebcam
Code:
fswebcam -d /dev/video0 -i 0 -r 2592x1944 -p YUYV logitech.jpg
and guvcview in video mode @1920x1080.
Warning: Don't buy this unuseable piece of CHARLIE-ROMEO-ALPHA-PAPA.
how to make creative web cam working with ubuntu
View 1 Replies View RelatedI am running Xubuntu Lucid 10.04 on a Sony Vaio. I recently dropped $100 on a Logitech QuickCam Vision Pro for Mac, on the recommendation on the ubuntu wiki [URL].. that it would "work perfectly" in Skype. In Skype, it did nothing. No Audio, no video, light wouldn't even come on. Essentially a $100 dollar paperweight. I really think someone should correct this misleading information on the wiki.
I followed the kludge listed here [URL].. to get the video to work. By executing Skype with the shell script listed in the first post, I could get the video test to work, but no audio, and when I tried to call someone, when I turned on video, Skype quit suddenly. For the record, yes, I unmuted the device in the Sound Mixer in the top right corner.
Later on, I tested it with guvcview, and the cam worked perfectly in that program. It's only Skype that doesn't know what to do with it. When I execute Skype in Terminal I get the following output repeating over and over again:
Code:
X Error, request 20, minor 0, error code 3 BadWindow (invalid Window parameter)
X Error, request 15, minor 0, error code 3 BadWindow (invalid Window parameter)
libv4l2: error setting pixformat: Input/output error
libv4l2: error setting pixformat: Input/output error
[Code]...
I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
I have difficulty with my webcam and Skype. I can see the other person but she can't see me. From a previous thread: Are you sure your camera isnt working? Supported hardware drivers are in the kernel usually. Test: press alt+f2, type gstreamer-properties go to the video tab and see if your camera is listed as a device. If yes, press the test button. This test was OK. I could see my face on the screen.
Quote: Ah, the Skype camera thing. Launch it this way: LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
I tried this. It launches Skype OK, but the little window that should show what my webcam sees, appears full of black and white static.
So I tried skyping this morning and I could not get my webcam to work it seemed like ti wasn't turning on. TO double check that it just was not skype I opened up Cheese the webcam picture application and it said "no device" found.The only thing I have really changed on my computer since I last skyped were just system updates so something broke in it.
View 1 Replies View RelatedI can't make a webcam working on an ARM version of Debian (Raspbian for raspberryPI)
I'm trying to use a command line media player to show the webcam images (mplayer)
The command is: mplayer tv:///dev/video0 and I got this output:
Code: Select allPlaying tv:///dev/video0.
the filename option must be an integer: dev/video0
Struct tv, field filename parsing error: dev/video0
Tv file format detected.
Selected driver v4l2
[Code] ....
Note aside:
- I've tried 3 different cams(got the same error for all of them)
- The output of the command: ls -ltr /dev/video* is crw-rw—-+ 1 root video 81, 0 Nov 11 09:06 /dev/video0
- The cam works in a program like "scratch" in a startx session but doesn't in the command line
l installed thelatest beta version of skype from officila skype on my ubuntu 9.10,but my webcam doesn' t work and l can not see other webcams, lt work correctly with amsn and cheese
View 1 Replies View RelatedI got a webcam and it works fine with cheese, skype and many other programs. But with jmf or mplayer it doesn't work.
With mplayer I used this command mplayer tv:// -tv driver=v4l:width=640:height=480:device=/dev/video0
Both jmf and mplayer just give static looking like this [url]
The web cam on my Dell Inspiron mini 10 doesn't work properly. Cheese only takes very dark pictures but no video and the main screen stays dark all the time. Skype transmits a very dark image, too. How can that be tweaked.
Bus 001 Device 002: ID 174f:1403 Syntek Integrated Webcam
I cannot use my motion eye webcam, here's the result of
Code:
lsusb
Code:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 05ca:1839 Ricoh Co., Ltd Visual Communication Camera VGP-VCC6 [R5U870]
i cannot use cheese, is there anyone know how to fix this problem?
My webcam worked with every application in Linux Mint6. I just upgraded to Ubuntu 8.04 and find that the input from the webcam looks like a green TV without horizontal lock in Camorama and Skype. However it works perfectly with Cheese.
View 1 Replies View RelatedMy webcam was working when I installed Fedora12. But now it doesn't work after about 2 months of playing with this OS. Because of this, I decided to reinstall it's driver.I downloaded it from ATrpms website, but if I try to install it the terminal says"/boot/vmlinuz-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12.x86_64 is needed by uvc-kmdl-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12-0.20090806-4.fc12.x86_64"File needed: /boot/vmlinuz-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12.x86_64File wanted to be installed: uvc-kmdl-2.6.31.12-174.2.3_1.cubbi_tuxonice.fc12-0.20090806-4.fc12.x86_64
View 4 Replies View RelatedI'm running ubuntu 10.04 and have a logitech webcam that's a few years old. When I run "cheese" all I see are wavy lines.
View 3 Replies View Related
