I just upgraded some audio programs using a ppa and now there is no sound at all,i have been using hydrogen drum machine and ardour with jack audio and now there is no sound at all.
View 9 RepliesI just installed the Ubuntu Studio packages on "normal" Ubuntu, 10.04 -
[code]...
I'm trying to run this on a Dell Mini 10v netbook.
Does anyone know where a site is that shows how to make certain beats on drum machine like it shows you where to put each beat?
View 2 Replies View RelatedI installed ardour on my F11 box, and both jack1 (0.xx, in /usr/bin) and jack2( 1.9.5, in /usr/local/bin/). Now when I try to start ardour, it balks about being unable to start jack. On the ardour settings page, I tried changing the JACK server path field from /usr/local/bin to /usr/bin, to no avail.
On the cmdline, here's what I get when I run, manually jack1 and jack2:
JACK1:
[root@localhost yati]# /usr/bin/jackd
jackd 0.118.0
Copyright 2001-2009 Paul Davis, Stephane Letz, Jack O'Quinn, Torben Hohn and others.
jackd comes with absolutely No Warranty
This is free software, and you are welcome to redistribute it
under certain conditions; see the file copying for details .....
That prompts me to think that JACK1 is fine... but still ardour won't start up.
I've got an Acer Aspire 5101 with Natty on it and everything works so far, but I can't start Muse. It says: "Muse failed to find a jack audio server". At the bottom it also says: "...if Jack was started check if it was started as the same user as Muse". This might be the issue. But how can I check this? BTW: Jackd has been installed and I am a Member of the Audio Group.
I am new to Ubuntu and don't know how to fix this. I got this Notebook for free, because my Brother wanted to dispose it as it didn't worked properly after he reinstalled xp. Only the dvd-drive is broken, the rest is in really good condition for such an old thing. After a lot of trial and error I could finally install Natty from USB.
Here's the problem: My notebook's right speaker makes an awful sound when playing music. I want to configure the sound so as to get MONO and balanced to the left when I use the built-in speakers, and STEREO w/o balance when and plug a jack, ie: earplugs.
View 1 Replies View RelatedDoes anyone have any experience of forwarding audio from Ubuntu to Windows 7 x64 via JACK? I'm struggling to find any useful documentation. I've tried to accomplish the same using a Pulseaudio server, which is better documented but the windows binaries are years old and as far as I can tell can't be made to work without disabling IPv6. Any other ways to forward audio would also be welcome. Bandwidth isn't really an issue as it's VM to VM on the same machine.
View 1 Replies View RelatedI try it for the first time. Befor I changed to linux I used MS Windows 7. There I worked much with SonyVegas for video and Adobe Auditon for music. Yesterday I searched for alternatives under Linux for Audition. And I found much. The screen shots says, that they look similar to Auditon. I downloaded them and installed them. But they doesn't work. One of them say they can't connect to Jack. Some of them say nothing, and so they don't record my line in/microphone input. After a few seconds I of search, I knew that all of these programs uses jack for Audio. I installed it, but the situation wasn't better. Then I found a wiki, and try that: first start jack, than start the program. So I do. But there i get a few error messages: At first I should copy to lines to the file lines.conf. I do it. Then I should be member of the audio group. I do that.
[Code]...
I have had no problems whatsoever with audio in ubuntu 10.10. Both input and output have worked great, but alas now there's a problem.
I recently installed ardour2 with jack (using apt-get) but for some reason, anytime I start ardour2 (which starts jack implicitly) all audio stops on the whole computer. That is my computer goes silent. As soon as I exit ardour2 audio resumes.
Also, although this will probably resolve itself when I resolve the other problem, when exporting a project to audio file from ardour2 it exports silence for the entire duration, even when ardour2 is exited and audio has resumed.
I'm no linux novice, so I'm not afraid of command line solutions (I prefer them actually) however I know nothing about jack or audio editing in linux whatsoever, so if you could be very specific about jack terminology that would be great.
I'm looking for configuring a Ubuntu box, we need to capture alsa output into ffmpeg with jack or OSS but not pulseaudio, as that tends to glitch badly. We have things working, but we are sort of hacking around in the dark, we play music, but as we aren't linux audio experts ourselves.
View 1 Replies View RelatedI have had success with operating JACK, but I am still learning... I can get audio through my microphone into ubuntu and can record into audacity without a problem, however, I do not know how to get JACK to recognize the audio from the microphone (through the normal mic jack)... any ideas how I may accomplish this so I don't need to do all kinds of file conversions and imports to set down a vocal track with the tracks I record (via USB) through JACK?
View 3 Replies View RelatedI upgraded to Ubuntu 9.10 recently to find that my computer will not play mp3 files in Rythmbox, Amarok, or Kaffeine media players. All of the FLAC files I have ripped from CDs work, but no mp3 files work. I have downloaded and installed the ubuntu restricted codecs from Synaptic as well as the codecs prompted by Rythmbox rebooted, and still no result.Like I said, the .FLACs play fine.On another note, no sound is being transmitted to my earbuds. The only sound will come from the laptop speakers.
View 4 Replies View RelatedIm a composer and I loaded up on some excellent applications for music creation and notation- so excited..
I start with Rosegarden. Failed to connect to JACK audio server. Try my other applications, same problem.
Basically the JACK audio server just WILL NOT RUN (correctly). I can sudo it and press start, but still it wont "play with" the applications! Heres the error message from JACK (I also get related errors when I try to do ANYTHING involving music creation):
error JACK Audio Connection Kit
-overall operation failed
-unable to connect to server
Here is the "fatal error" from MusE
"Failed to Find Jack Audio Server"
This is the JACK output:
[Code]...
now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel.i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 1 Replies View RelatedI'm a complete Linux newbie - only installed it yesterday, and have spent hours trying to get my M-Audio Firewire Solo sound card to work. I can hear nothing at all. I know nothing of Linux, but am willing to learn. While I learn though, it would be nice to listen to a little Hall & Oates. I've got to the stage where the error messages I'm receiving don't bring up any results on Google. Here's what things look like (watch out, big pic):
Those sample rate errors appear in the terminal when I start ffado-mixer. I'm running JACK with everything set as I think it's supposed to be, except that 'Realtime' is unchecked.If I start JACK running with 'Realtime' checked, it tries to launch and fails, saying "JACK is running in realtime mode, but you are not allowed to use realtime scheduling. After applying these changes, please re-login in order for them to take effect". I don't know what more it wants me to do - i've already added
@audio � rtprio 100
@audio - nice -10
@audio � memlock unlimited
to /etc/security/limits.conf, and selected the 2.6.31-11-rt kernel on GRUB bootup. I'm a member of 'audio' and 'disk' groups like'm supposed to be. Have I not got the connections right in JACK? Have I got some sample rate settings wrong somewhere?I'm not even bothered about low latency with the realtime kernel right now, I just want to hear some sound
The Green jack for audio of the sound card is dead. The other jacks [Blue and Pink] are not working for audio. I have them working as audio outputs in windows xp-using the Realtek interface.How can I do the same in Ubuntu?
View 9 Replies View Relatedi have the OSS drivers installed for my M-audio Delta 66 card. took a lot of tweaking to get it my sound to work well. installed hydrogen and no sound. read that i need jackd. messed around with that and couldnt get it to work either. no matter what i do i cant get sound.
i am a super duper newbie at linux. usually i can find some writeup about how to make something work but not luck with this issue. thanks so much if you can help out.
a little background on myself and why i am such a newb: I use to download pirated copies of windows and pretty much any software i wanted. kinda thought it was time to stop stealing software when there was so much out there available for free. i am trying really hard to stick with linux. but i have a lot to learn. my friend who is big into linux told me "the linux community needs people like you" i am pretty much the average person, not a big computer nerd, but i am really into the unbuntu philosophy.
Hydrogen, the drum machine for Linux, worked 100% great in Jaunty. I upgraded to Karmic and bam, sound is crackling and laggy.
View 2 Replies View RelatedSo there is sound but not from anything run thru jackaudio.Ardour and .9.5 hydrogen are not working i just upgraded a bunch of the programs using a ppa and now the jack ones are not working
View 1 Replies View RelatedI want to experiment with Hydrogen, Rosegarden and other music apps it seems that jack is a useful program to do that. I have a standard install of Lucid. When I start Jack, it gives a message "suspending Pulseaudio The jack apps I am using have no sound. I assume that I need to set up an ALSA device to connect Jackd to? Is that correct?
[Note: I found these instructions for "running Pulseaudio on top of jack" [URL].. but they look more complicated than I need. I'm only using jack a little each day so I am fine with turning off Pulse during those times.]
What is the simplest way to get sound out of Jack apps? If it is to set up an ALSA device, how do I do that without interfering with Pulse which will be running the other 90% of the time? Or am I totally misunderstanding the setup?
I can't run Ardour GTK2 in Ubuntu 10.04. JACK control is open, but sends error messages relating to not being able to connect to the JACK server whenever I try to press play.
Ardour says JACK is running in another user's profile, and I haven't even made it to the program yet. Error message also says audio controls could be messed up.
I have two networked Ubuntu 10.40 machines and I am trying to stream audio from one machine to the other. I find on the surface everything works - I simply installed padevchooser and set the pulseaudio sink to the other machine. Now here comes the problem - whenever I do anything else involving network activity the sound crackles and hangs and it becomes hopeless. I've seen people elsewhere online complaining about crackling in relation to CPU usage but I can't find anyone talking about network usage.
In particular I often work on my office computers over VNC. I try to fire up VNC and it starts to load the remote desktop and the sound completely fails. I assume this is some kind of latency issue? Another good example is trying to watch a video on ..... - the sound plays at first but then as the video is being downloading in the background the stream starts to mess up. Listening to an mp3 in totem with no other network activity works fine.
when I try to export a song from Hydrogen to WAV or MIDI they export, but when I try to listen to the exported file it doesn't show any sound or anything. I have Ubuntu 10.10 with Realtek AC '97 embedded sound card, the sound work perfect in the machine, actually it works perfect on the program itself but in the exporting, it doesn't work, what should I do to fix this problem?
View 1 Replies View RelatedI have installed Hydrogen with the add & remove software which seemed to install fine in OPenSuse11.3 but when I click the icon nothing happens at all
View 6 Replies View RelatedI have Ardour GTK2 , and I am trying to record from a mic, AND IT JUST WONT WORK
View 4 Replies View RelatedI'm trying to compile Ardour 2.8.4 under openSUSE 11.2 with VST support. I think I've installed all the dependencies, but when I run scons I come up with this:
Code:
[usual ****]
...
[code]....
I am running Karmic (9.10) on an MSI U120 Wind. I dislike netbook-remix but that is beside the point.
Last night I made the biggest mistake of my life which is causing a loss of still counting hours. I decided to do an update, due to having enough bandwidth, and security updates to download.
So it finished, and I went to sleep.
This morning I went to plug in my speakers to the audio jack so I can listen to music loud, and it was all distorted. I changed al 8 or 9 volume controls and nothing. I unplugged the wire from the audio jack, and the sound is perfect on my netbook's speakers.
I have tried different wires, speakers, editing config files, removing and purging related packages, and nothing works...
I have been google-ing for hours and everyone seems to have the same problem, but all of the supposed fixes do not work for me...
Here is a pastebin of my Alsa info : [URL]
I fear switching back to winblowz..
whenever I try and start it, it spits this at me: p, li { white-space: pre-wrap; } Could not connect to JACK server as client. - Overall operation failed. - Unable to connect to server. Please check the messages window for more info.its all greek to me I fiddled with some basic settings, but to no avail, I'm running a dell dimension 9150 with a stock soundcard. To be honest, I don't know what Jack is, but it opens when I open DJplay, so I'm guessing its like Asio4all when running deckadance?
View 1 Replies View Relatedhappened and now half of the speakers plug is stuck in the back of my PC. cant get it out, because it's very deep. i decided to use the front jack for sound but it wont work.already tried alsa mixer and upgraded my kernel. i think the problem is that i need to somehow kill the jack in the back of PC because its still alive and sending signals to that half-dead jack
View 2 Replies View RelatedI have a 1080p video card installed via PCIe and can't seem to get sound to work on my big screen tv unless i use a audio jack and stereo.
View 7 Replies View Related