Ubuntu Multimedia :: Unable To Setup Robocode In 10.04?
Feb 3, 2011Not able to setup Robocode in ubuntu 10.04. the setup instructions given in [URL] is not working.. setup of Robocode?
View 4 Replies
ADVERTISEMENT
Server :: Unable To Setup A NIS Server Setup On CentOS System
Jan 19, 2010We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
OpenSUSE Multimedia :: Script For Unattended Setup/remove Multimedia Packages?
Nov 18, 2010I've built a script that should meet the requirements to pass the MMCHECK script written by J. McDaniels and RedDwarf. Save anywhere, call anything, and then (must be run as root):
chmod +x <nameOfFile>
./<nameOfFile> setup|remove
Code:
#!/bin/bash
function addRepo() {
[Code]...
Ubuntu :: Unable To Setup Internet Connection
Mar 18, 2010I've very recenty installed Ubuntu v 9.10(64amd) but am unable to setup my internet connection.I've gone through quite a few posts where other users have faced the same trouble trying to setup a DSL connection.I've entered all my Ip4 settings as they are on Win..but that hasn't helped.That didn't open my modem settings page either.Modem model : SmartAX MT882 connected via Ethernet and not USB.Can't quite figure out what I'm doing wrong/need to do.
View 8 Replies View RelatedUbuntu :: Unable To Setup VNC Using Remote Desktop
Nov 27, 2010I am Trying to set up my desktop in order to access it from a remote computer using Remote desktop. I have ubuntu 10.10 and am using the included software remote desktop. When I run the programm is says i can only connect locally using the name "local host". I am trying to connect to my desktop from a vnc app on my ipod touch. It asks me for the ip address and the port.
View 1 Replies View RelatedSoftware :: Unable To Open .Net Setup Exe On Ubuntu
Jan 1, 2010I have created .NET 2.0 windows application setup with MySQL database on the XP and I have installed same setup on the Ubuntu. Right now my setup installed successfully but I'm facing one major problem.When I clicked on my project exe shortcut I'm not able to view the same.
View 7 Replies View RelatedUbuntu Installation :: Unable To Edit Partitions During Setup
Jan 24, 2010I can't edit the partitions in the install setup: I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices.The behavior of OpenSuse 11.2 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that in OpenSuse, fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched. They assure me that it is a "plain vanilla" ("next, next, next" installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.Could it be any awkward problem specific of the motherboard / SATA controller or its drivers?
Ubuntu :: Unable To Send Emails Through Webserver, Setup?
Sep 14, 2010I just want to be able to send emails through my webserver, setup. I couldn't find a dev forum - so thought i'd post here. I'd like to be able to send emails (form my localhost setup) to and from my global client, namely: ( ***@yahoo.com), using PHP and Apache. A snippet from my php.ini file looks like:
Code:
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://php.net/sendmail-path
sendmail_path = /usr/sbin/sendmail -i -t
sendmail_from = example@yahoo.com
Now, I never could get this working in Windows, let alone Linux. I could do with it working though.
Ubuntu Servers :: Unable To Setup VirtualBox 3.2.8 On Lucid
Oct 2, 2010I am trying to set up Vista on my Lucid within VirtualBox so I can run 3CX IP PBX. I have installed the virtualBox and set up a virtual space called "Vista", but when I start it (Power on) I get an error message - see screenshot enclosed. If I run the command
HTML Code:
'/etc/init.d/vboxdrv setup'
as instructed in terminal I get.
HTML Code:
root@server:/home/server# /etc/init.d/vboxdrv setup
WARNING: All config files need .conf: /etc/modprobe.d/dahdi, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/dahdi.blacklist, it will be ignored in a future release.
[code]....
General :: Unable To Setup The Partitions
May 29, 2010I think something has gone wrong with my attempt at setting up a new partition. I have two HDDs, initially one was divided into two partitions. I shrank the second partition using resize2fs from a live cd and am trying to create a third partition. I have been trying to follow this:[URL]
Here is the output of fdisk -l and df -h:
xebian:~# fdisk -l
Disk /dev/ide/host0/bus0/target0/lun0/disc: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]...
Ubuntu Networking :: Kubunutu 8.10 Setup - Unable To Get Internet Configured?
Feb 10, 2010I have kubuntu 8.10 up and running however I am not able to get internet configured. this is on a laptop i re-purposed. I have ubuntu on a desktop that works just fine. however w/ kubuntu no such luck. i realize its just kde vs gnome and am connected to the same router and such so all should work just fine, but alas it doesn't.the desktop is configured using dhcp, not static IPs.
the laptop w/ kubuntu isn't recognizing eth0
>cat /etc/network/interfaces displays:
auto eth0
iface eth0 inet dhcp
after restarting and running /etc/init.d/network restart.there is no resolv.conf... i understand dhcp should auto-create this? furthermore running ifconfig desplays no results ?
Ubuntu Installation :: Setup Unable To Find Hard Drive
Dec 7, 2010When I start the Live CD I can see my harddrive and access it. But when I start the setup, it cant find the harddrive and I can not choose it. Ive tryed more than one cd's and another distro (built on Ubuntu). The hard drive works fine, Ive got Windows 7 already on it (help me change back to linux). I know the computer works fine as I once used another computer to install ubuntu on the harddrive and then moved the harddrive to my computer.
View 8 Replies View RelatedUbuntu Multimedia :: Unable To Install Multi-Disc Game - Unable To Eject CD-RW / DVD RW Drive DBus Error
Apr 22, 2010I'm trying to install The Sims 2 (which I'm aware currently does not run properly in wine anyway), using the multi-CD version. The installation goes normally, up until it comes time to switch from disc 1 to disc 2. The installer prompts me to insert disc 2, but it seems that Ubuntu still believes that the installer doesn't want me to open the drive, because, when I try to open it, it doesn't open, and a window pops up with the following message: Unable to eject CD-RW/DVD RW Drive DBus error org.gtk.Private.RemoteVolumeMonitor.Failed: An operation is already pending
View 3 Replies View RelatedDebian Installation :: Unable To Setup Printers With The GUI?
Apr 14, 2010After my install I have no print control panel in the Gnome menu > System > Administration
What Packages do I need to install to be able to set up printers with the GUI?
Installation :: No Setup Agent And Unable To Log Into Fedora 10 / Get That?
Feb 28, 2009I installed Fedora 10 in text mode. Then I logged in as root and modified inittab to switch to GUI mode. I did not see any Setup Agent after the installation in text mode.
Now that I'm in GUI mode, I get the login screen, but it won't let me log in as root ("failed to authenticate user") and there is no Setup Agent to prompt me to create other users. I don't know how to get back to text mode, either. How do I login to the system?
Fedora :: Unable To Setup 11 Dual Monitors KDE?
Jun 13, 2009I have a dual-monitor setup with a 1920x1200 lcd on the left and a 1280x1024 lcd on the right. In Fedora 11 on GNOME, using display settings, I can configure them properly.
KDE, however, is refusing to let me configure them as separate monitors. They are stuck permanently in mirrored mode, and I can't adjust positioning or anything. Here is a screenshot of the desktop with krandr running.
[URL]
OpenSUSE :: 11.4 - Unable To Setup Core Path For SMB
Jun 11, 2011I want to set up a PDC on my computer using Samba without LDAP, etc. The only thing I need is to share folders between the two ridiculous computers here. I got a 11.3 laptop and this 11.4 desktop. This is the /var/log/samba/log.smbd extract:
Code:
[2011/06/11 08:29:35, 0] lib/fault.c:250(dump_core_setup)
Unable to setup corepath for smbd: Permission denied
[2011/06/11 08:29:35, 0] smbd/server.c:1134(main)
smbd version 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64 started.
Copyright Andrew Tridgell and the Samba Team 1992-2010
[2011/06/11 08:29:35.951937, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.954910, 0] passdb/secrets.c:73(secrets_init)
Failed to open /etc/samba/secrets.tdb
[2011/06/11 08:29:35.955027, 0] smbd/server.c:1234(main)
ERROR: smbd can not open secrets.tdb
This is the /var/log/samba/log.nmbd extract:
Code:
[2011/06/11 08:27:48.682275, 0] nmbd/nmbd_become_lmb.c:395(become_local_master_stage2)
Samba name server ANTARES is now a local master browser for workgroup XXXXXXXX.WORLD on subnet
[2011/06/11 08:28:08.700572, 0] nmbd/nmbd_serverlistdb.c:343(write_browse_list)
write_browse_list: Can't open file /var/lib/samba/browse.dat.. Error was Permission denied
I have modified in Yast the User Authentication Source to smbpasswd and specified the correct path to the file...
This is the /etc/samba/smb.conf extract:
Code:
passdb backend = smbpasswd:/XXXXXXXX/smbpasswdfile
I erased all the samba related configuration files, uninstalled samba cli/ser samba-yast cli/ser and reinstalled, reconfigured and still have same issue. It worked very well with 11.1... (I clean installed 11.4 yesterday). I thought take sources from samba, compile and then see if it works...
Hardware :: Setup Unable To Access Disk
Feb 8, 2009It all started when I decided to take the plunge and install Linux, bearing in mind that I am still completely dependent on Windows. I decided to go for Ubuntu, hearing that it is user-friendly and easy to learn. My current machine dual boots to WinXP & Vista. Following the guide regarding pre-partitioning, I decided to delete a partition I no longer use so I can install Ubuntu on there. Using XP's disk management, I deleted said partition, but it somehow also deleted my Vista partition! As a result, I am now unable to boot to Vista. I went back to XP, and ran Partition Magic to fix the partition tables. However, I get an error saying something about the partition's drive letter can't be identified. Decided to resinstall Vista but when it asked me where to install, I noticed that it only shows 3 partitions instead of 4 (my data partition has somehow vanished as well). Then I heard a noise from my HDD, and it suddenly reboots. Decided to log back to XP, but I am unable to boot to XP as well (got BSOD'ed).
Got my XP setup disk to reinstall, but this time, XP setup only recognizes one big partition(250gb).... and below the partition there is a note that says "Setup unable to access disk." I also tried the recovery console, and on the C: prompt when I did the chkdisk, it says something about invalid file path or can't find the path. Tried the Vista install again, it was also unable to access the disk. So what happened? Is my HDD dead? Finally, I thought I'd give Ubuntu a try. Decided to do the "Live CD" first, and wow, nice user interface! Then suddenly, I saw my "data" drive and "winxp" drive! Everything is accessible and all my files were there. I was overjoyed knowing that it didn't wipe out any of my files. So I guess my main question is, should I go ahead and install Ubuntu and will I be able to get those files back? Is there a program similar to XP's disk management? And finally, I know not related to Linux, but how can I boot back to XP?
Hardware :: Unable To Setup BSNL's WLL Modem?
May 12, 2010to setup BSNL's WLL modem
Model is Linktop CT800P. Device is detected as "FWP USB Modem 3197" in Windows XP.
I've setup this device in Windows XP, but unable to do the same in Linux.
Ubuntu Installation :: Unable To Dual Boot In 3 SATA Drives Setup
Jun 4, 2010I have the following PC set up:
Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives:
The first one has Windows XP installed on it.
The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows.
The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using:
C:Bootsectc.lnx="Linux Ubuntu"
After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini:
multi(0)disk(0)rdisk(1)partition(1)="Linux11"
(i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
Fedora Servers :: Unable To Setup Tftp Server?
May 10, 2010You are running tftpd as an on demand server i.e. it is only fired up when it is needed. Services run by xinetd are always run on demand. Have you actually tested if tftp on another system can access your PC i.e.
Code:
tftp your_pc_ip_address
Fedora :: Kmymoney - Unable To Setup An Online Account
May 11, 2010I was wondering if anyone uses kmymoney? I am trying to setup an online account but I get errors when I try to map to an online account.my bank is M&T bank and quicken 2007 is no longer supported.
View 2 Replies View RelatedNetworking :: Unable To Setup Dsl Connection In KDE Fedora 15 / Solve This?
Jun 19, 2011I installed the Kde desktop and i'm unable to setup a broadband dsl connection
i have done the settngs in network manager gave password username service name etc.
but the option for connection doesnt appear
the connection works properly in windows as well as gnome 3 desktop but not in kde
OpenSUSE Install :: Unable To Edit Partitions During Setup (11.2 X64)?
Jan 21, 2010I can't edit the partitions in the install setup. When I go tyo the Expert Partitioner, I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices:* /dev/md126 with 465.76 GB, not encrypted, type RAID1 (no info for chunk size, parity or file system)* /dev/md127 with 2.2 MB, not encrypted, RAID_UNKNOWN (no info for chunk size, parity or file system)I didn't try to do anything in the RAID part because I wanted to preserve Win 7, but I dared to add a partition in the "hard disk" (sda) and I get an error: "the disk is in use and cannot be modified".
The behavior of Ubuntu 9.1 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched.y assure me that it is a "plain vanilla" ("next, next, next") installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.
General :: Unable To Setup PATH Using Shell Script?
Feb 14, 2011I am creating one bash script name as pathsetup.sh.
In that , I am trying to setup a path to my user profile. S my script content is as follows,
pathsetup.sh contains,
#!/bin/bash
MY_PATH=/home/arun/NS3/ns-3.9/build
export PATH=$PATH:$MY_PATH
echo "$PATH"
If I run the script, when run time it shows the MY_PATH added to PATH.
But, when I check it in terminal after run, it doesn't add the PATH.
if I put echo $PATH in terminal, it show old path.
How can I add path permanently to a user.
I read, ~.bash_profile , we can add the path permanently for a user.
But, I want to add MY_PATH for a specific time. I don't want any user change the file .bash_profile each time.
Just running the pathsetup.sh script, MY_PATH should be added to the user PATH.
Instead of .bash_profile, using shell script, can it possible to add path permenetly for a user.
Server :: Unable To Setup Replication In MySQL 5.0.77 On CentOS 5.5
Jun 21, 2010I am looking into setting up replication in a production environment but currently this is on two test machines. I am following the documentation at [URL] but I am unable to get past "16.1.1.10 Setting the Master Configuration on the Slave". When I do the CHANGE MASTER TO I am getting a syntax error for some reason. What am I doing wrong? These servers run "CentOS release 5.5 (Final)" and "MySQL 5.0.77-log Source distribution" installed via yum. The only changes from default are that I created a single database on the master before doing the table lock and dump, then everything else has been done exactly to what the documentation states, but is still failing.
The option skip-networking is not in the config file on either server and neither one runs SELinux or any firewall.
mysql> CHANGE MASTER TO
-> MASTER_HOST='192.168.1.220'
-> MASTER_USER='repl'
-> MASTER_PASSWORD='removed'
[Code]....
Fedora Networking :: Unable To Setup Etho With Static Ip Adress
Dec 10, 2010I'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies View RelatedOpenSUSE :: Unable To Setup Corepath For Smbd: Permission Denied
Jun 6, 2011I installed samba em my opensusse and i have fallows error: Unable to setup corepath for smbd: Permission denied
View 1 Replies View RelatedUbuntu Servers :: Unable To Resolve Host URL - Domain Setup / Home Based Web Server
Jan 18, 2011I have setup a home based web server to host a photo blog for myself and my friends. I will be running wordpress and possibly a phpbb3 forum. I'd like to open this to discuss server administration, server setup, and server maintenance. However, I have a pretty good start on all of those but serving a domain name to my static ip. Here my static ip is 24.10.202.144. I registered a domain through [URL]... It appears that I have the domain working to forward to my ip. However, I am still getting this output file from apache.
[code]...
I have tested the domain name across a few different computers on different ips. It works appropriately. I just want to make sure I have it set correctly on the (apache) server side of things. Then I can get more into Zone Editing etc.
Ubuntu :: Teamspeak 3 Server Connectivity - Unable To Get Network Setup Correctly To Allow People To Connect Externally From My LAN?
Jan 21, 2011I have Ubuntu 10.04 x86 installed, trying to get teamspeak 3 beta30.I have followed this guide: http://robert.penz.name/296/howto-in...u-10-04-lucid/
And can not get my network setup correctly to allow people to connect externally from my LAN. I have forwarded every relevant port I could find to the computer hosting TS, I forwarded them first as their respective protocols, and then as the combined UDP/TCP. I tried Forwarding single port numbers, and then port ranges.I have also tried uninstalling selinux.I have tried connecting directly to my cable modem with the server.I had this working perfectly three months ago with all the same software, using the same guide I listed above.The only thing I can imagine has changed is my operating system itself with system updates.
My network looks like:
Comcast cable modem--->Netgear WNR3500L Router----->Ubuntu 10.04 x86 desktop edition
what else I could possibly check? I can connect to and manage the TS server fine using localhost:9987 or 192.168.1.x:9987, it just wont allow any connections from outside the network.