Ubuntu Installation :: Unable To Edit Partitions During Setup
Jan 24, 2010
I can't edit the partitions in the install setup: I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices.The behavior of OpenSuse 11.2 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that in OpenSuse, fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched. They assure me that it is a "plain vanilla" ("next, next, next" installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.Could it be any awkward problem specific of the motherboard / SATA controller or its drivers?
View 4 Replies
ADVERTISEMENT
Jan 21, 2010
I can't edit the partitions in the install setup. When I go tyo the Expert Partitioner, I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices:* /dev/md126 with 465.76 GB, not encrypted, type RAID1 (no info for chunk size, parity or file system)* /dev/md127 with 2.2 MB, not encrypted, RAID_UNKNOWN (no info for chunk size, parity or file system)I didn't try to do anything in the RAID part because I wanted to preserve Win 7, but I dared to add a partition in the "hard disk" (sda) and I get an error: "the disk is in use and cannot be modified".
The behavior of Ubuntu 9.1 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched.y assure me that it is a "plain vanilla" ("next, next, next") installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.
View 7 Replies
View Related
May 29, 2010
I think something has gone wrong with my attempt at setting up a new partition. I have two HDDs, initially one was divided into two partitions. I shrank the second partition using resize2fs from a live cd and am trying to create a third partition. I have been trying to follow this:[URL]
Here is the output of fdisk -l and df -h:
xebian:~# fdisk -l
Disk /dev/ide/host0/bus0/target0/lun0/disc: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]...
View 7 Replies
View Related
Mar 28, 2010
I'm having trouble installing it on a "new" computer that I found at Goodwill for $60 with no operating system on it. When I go to edit the partitions, it won't let me do anything due to an apparent lack of a root filesystem. (I know this issue has been brought up and resolved in the past, but the usual solution (going into the validation.py file) isn't working for me, as there is no line in this one that says "if not root".)
View 9 Replies
View Related
Feb 18, 2010
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
View 4 Replies
View Related
Nov 12, 2010
I bought the new harddisk so was doing a fresh install of ubuntu (Already installed win7)
But ubuntu setup is not detecting the partitions correctly it is showing 4 partitions but I have 5 (and +1 which is created by win7 of 100mb for system usage)
Setup is showing total 4 partitions and clubing all the partitions together and showing as 785gb and one partition is not detected at all and the other 3 partitions only one is correct 100mb win7 system usage partition.
I have 4 partitions ntfs and 1 partitions exFat, I had created exFat hoping ubuntu setup will detect it as different partition but that is not shown in partitions selection menu.
View 6 Replies
View Related
Oct 20, 2010
I am trying to use the Idea6410 board for developing SPI applications.Unfortunately, the software was built using the s3c2410 SPI Drivers instead of the s3c6410 SPI drivers using linux_2.6.24. The problem is that this version doesn't contain a s3c6410 version of spidev. So I built a new kernel using linux-2.6.36-rc8. However, the arch/arm/plat-samsung directory does not contain equivalent methods of setting up NAND partitions.The /arch/arm/plat-s3c24xx/common-smdk.c file contains the following code, apparently an old method, to setup NAND partitions:
Code: struct mtd_partition s3c_partition_info[] = {
{
.name = "Bootloader",
[code]....
View 3 Replies
View Related
Jul 3, 2010
I have installed QCAD from ubuntu software center. Unable to locate it in the menu. Presently using terminal to access the program. Went to applications, right click mouse-clicked on edit menus-nothing happened.Went to preferences - clicked on Main menu - nothing happened.
View 1 Replies
View Related
Mar 15, 2010
I am using Ubuntu 9.04 on a Sony Vaio. Because when I installed it I was new in Linux, I messed up with the partitions and I have lots of unused logical partitions in my extended one.
I have used Gparted to delete a number of partitions and create a new, bigger one (ext3, logical), within the Linux extended partition I have
well, first of all I do not understand why it created partitions that are not mounted, that is I can only access them typing my password and they got automatically unmounted as I restart the computer
but the worse is that I cannot write on it! I completely deleted the previous partitions but, when I open it, there is still a folder "lost and found" that I am not allowed to open (+_+) and when I drag anything into the window it says "error" that is I cannot write anything on an empty partition...
View 9 Replies
View Related
Nov 9, 2010
ive bought a new laptop, dell studio 17, and now ive wanted to install fedora 14 (64 bit), but after a few minutes the first problem appeard. Ive wanted to add the partitions and it always tells me that it "Could not allocate requested partitions: not enough free space on disks."
the funny thing is this, that my hard disk has got 500GB memory space and 150GB is full
EDIT: Win7 is running at the hard disk... could this be the problem?^^
View 4 Replies
View Related
Oct 1, 2010
Basically, I would like to have a separate /home partition on my hard disk that will be shared by two different Ubuntu releases. In other words, I would like Maverick and Lucid to be on their own separate partitions, but to share the same /home. I already have Lucid installed (no separate /home). I know how to use GParted with the Live CD in order to edit partitions, but the main question I have is how do I migrate my /home folder to its own partition without ruining data? I've skimmed through some GParted tutorials but they don't exactly detail what I want.
Once that is done, I need to know if it is possible for Lucid and Maverick to share the same /home partition, and how would I set that up?
View 7 Replies
View Related
Jan 11, 2011
I was on Ubuntu 10.04 I used the Disk Utility to edit the partitions.
Here is the table it's showing:
Here I deleted 79 GB patition from FAT32 to NTFS and deleted 50 GB space that was ext4 partition where SUSE was residing the bootloader was of SUSE that was working using the same utility.
After that with a live cd of ubuntu I tried to recover the grub but there was no device.map file. Later I found the partition table absent.
The utility shows above table but Gparted shows only 500GB free space without any partition. Please help can't loose all the data.
I can access the partitions in live environment I can't even install a fresh OS because It also shows 500GB unallocated space.
View 3 Replies
View Related
Jun 17, 2010
I'm an old user of Ubuntu/Linux but have stumbled across my first major problem in years. I just can't get my head around it.I own a Asus Eee Pc 1005HA it has roughly 160gb and is currently running WinXP. I'm trying to install the latest Netbook remix 10.04 onto the machine as a dual boot option.I've loaded the iso onto a usb drive and everything works perfectly. The problem is during installation. I can't work out how to set up the partitions for a dual boot option. Below is the current configuration on the system.
/DEV/SDA
/DEV/SDA1/NTFS 77375MB Windows XP Partition
/DEV/SDA2/NTFS 77366MB Free space
[code]....
I would like to use the free space as my Ubuntu installation. Can anyone advise me on the best way to install this without affecting my WinXP system.
View 3 Replies
View Related
Aug 7, 2011
Two nights ago I installed the KDE Spin of F15 and it all went smoothly. Then, I decided to try and use Windows' bootloader (it was a dual-boot) instead of GRUB. So I booted into Windows, spun up EasyBCD, added the correct entry for Fedora, and overwrote the MBR. I rebooted and tried to boot into Fedora, only to realize that the Windows Boot Manager had a failsafe that sensed when it didn't boot into Windows, and it stopped me from booting into Fedora.
At first, I booted into my live USB and tried to get GRUB back. After a couple Konsoles full of GRUB telling me that it couldn't mount the drive and install itself, I decided I was probably doing something wrong and it would be much easier to just reinstall Fedora.
I deleted the Fedora partitions I had made earlier from Windows (because it was already running). Then I booted into my live USB and tried to install Fedora. I clicked "OK" to make a partition (that would mount at /boot) that was 500 mb. It told me there wasn't enough space, but sitting right next to one of the already installed partitions was more than 190000 mb of space. So I tried to redo the partition with 250 mb, then I tried to make the swap partition and the main one (that would mount at /). I kept getting the error. I decided maybe it was a problem with the USB, so I rebooted into Windows and reinstalled the ISO onto the USB (with unetbootin) and repeated the process, only to get the same error.
P.S- I tried to use the option to "Use Free Space" as well as doing it manually and got the same error. Also, I saw another thread where a person with my same type of compute (a Lenovo Y560) had a similar problem. It might be possible there's a hidden partition for Lenovo's purposes? Anyways, the other user's solution was to move the an extended partition somewhere. I'll be posting an fdisk soon, in case I have the same problem as the other user. The other user used GParted, but it looks like I can use Easeus too, which I already have installed.
P.P.S- Here's the fdisk in case it will help:
Code:
Disk /dev/sda: 640.1 GB, 640135028736 bytes
255 heads, 63 sectors/track, 77825 cylinders, total 1250263728 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
View 4 Replies
View Related
Dec 7, 2010
When I start the Live CD I can see my harddrive and access it. But when I start the setup, it cant find the harddrive and I can not choose it. Ive tryed more than one cd's and another distro (built on Ubuntu). The hard drive works fine, Ive got Windows 7 already on it (help me change back to linux). I know the computer works fine as I once used another computer to install ubuntu on the harddrive and then moved the harddrive to my computer.
View 8 Replies
View Related
Apr 14, 2010
After my install I have no print control panel in the Gnome menu > System > Administration
What Packages do I need to install to be able to set up printers with the GUI?
View 2 Replies
View Related
Feb 28, 2009
I installed Fedora 10 in text mode. Then I logged in as root and modified inittab to switch to GUI mode. I did not see any Setup Agent after the installation in text mode.
Now that I'm in GUI mode, I get the login screen, but it won't let me log in as root ("failed to authenticate user") and there is no Setup Agent to prompt me to create other users. I don't know how to get back to text mode, either. How do I login to the system?
View 3 Replies
View Related
Mar 22, 2011
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
View 9 Replies
View Related
Mar 3, 2010
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
Code:
sudo fdisk -lu
sudo sfdisk -d
sudo parted /dev/sda print
and have received the following output:
Code:
ubuntu@ubuntu:/mnt$ sudo fdisk -lu
omitting empty partition (5)
Disk /dev/sda: 60.0 GB, 60011642880 bytes
[code]....
View 3 Replies
View Related
Feb 9, 2011
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies
View Related
Jun 4, 2010
I have the following PC set up:
Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives:
The first one has Windows XP installed on it.
The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows.
The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using:
C:Bootsectc.lnx="Linux Ubuntu"
After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini:
multi(0)disk(0)rdisk(1)partition(1)="Linux11"
(i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
View 9 Replies
View Related
Sep 19, 2010
I am using ubuntulite for an old pc. The speed and performance is excellent!! But there is one problem. I am not able to edit my ip address. The computer is on lan and i have to assign a static ip to my system so that it connects to the net. The gui is not working. So I want to edit the ip through the terminal. How to edit the ip throught the terminal<command line>.
View 9 Replies
View Related
Mar 23, 2011
I would like to edit a PDF file I have; in particular I'd like to overlay a JPG image at a certain position.
I have tried PDFEdit, but it seems it is not able to add images into a page. Any alternatives?
View 4 Replies
View Related
Jul 8, 2011
When I am right clicking on menu or clicking on main menu (system<preferences) nothing is opening.I tried reinstalling gnome desktop, python..and there is no use.What should I do now??I want to edit my menu.
View 9 Replies
View Related
Feb 13, 2010
I am running Ubuntu 9.04 on an Acer Aspire laptop and have broken my display system while trying to use the restricted drivers for the nvidia graphics card.
Basically I downloaded and activated the restricted driver. I rebooted and now ubuntu freezes on startup.
I can get access to the command line but am unable to edit either fstab or xorg.conf because ubuntu has mounted the filesystem in read only mode.
I have read and tried all the options given in this posting [URL] but because I cant read or write any of the files I cant seem to affect any change to the system
View 1 Replies
View Related
Dec 8, 2009
I'm unable to edit my Menubar, when i right-click on Menubar i have not "edit Menu" Choice! what's problem? How I can edit menus?
View 7 Replies
View Related
Apr 8, 2011
I placed some new partitions in my hard disk but have been unable to write the correct entry in fstab to get them to automount. I can see them in nautilus and manually mount and use them, but I get failures when I try to add them to fstab, unsure what I am doing wrongI mounted two new partitions, one ext4 and one ntfs formatted partions.The fstab file reads as follows
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sda5 / ext4 errors=remount-ro 0 1
[code]....
View 3 Replies
View Related
Sep 7, 2011
I started using Ubuntu about 2 months ago, and having been studying every day since. About 2 days ago, I downloaded a copy of i386 Squeeze, and installed it onto an old extra machine (Dell 2350 tower, 768 MB RAM, 30 GB HD, Ethernet broadband) as a learning project.
During the install, I chose to not specify an online mirror. (I was trying to keep things as simple as possible, and save time while I was at it.) I didn't realize that by not specifying a mirror, the new system wouldn't have any links for finding new software. (In Ubuntu, it was automated and required no input &/or editing from me.) Reading posts at this forum, I learned that I need to edit the sources.list file. This was my first attempt at editing a Linux system script file, and I wasn't able to manage doing that. I chose to open it using gedit, and found I couldn't change its contents. I figured out then, that it was read-only.
View 14 Replies
View Related
Jul 24, 2010
I have F13 installed. As was in F11 , i cannot edit my menu bars by right clicking the menu bar. Also in system>preferences> . there is no EDIT MENU option available to edit.
View 1 Replies
View Related
Jul 20, 2011
[URL] my labtop can't adjust brightness by fn key. i updated bios to lastest version but i can't config grub becouse in fedora don't use grub2.
View 3 Replies
View Related
