Installation :: No Setup Agent And Unable To Log Into Fedora 10 / Get That?
Feb 28, 2009
I installed Fedora 10 in text mode. Then I logged in as root and modified inittab to switch to GUI mode. I did not see any Setup Agent after the installation in text mode.
Now that I'm in GUI mode, I get the login screen, but it won't let me log in as root ("failed to authenticate user") and there is no Setup Agent to prompt me to create other users. I don't know how to get back to text mode, either. How do I login to the system?
View 3 Replies
ADVERTISEMENT
Jun 21, 2011
I try to configure nagios server in my network. In nagios server I need to configure sendmail rely agent. I configured sendmail like given below
Code:
dnl #DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
define(`SMART_HOST', `mail.mydomain.com')dnl
define(`RELAY_MAILER_ARGS', `TCP $h 25')dnl
define(`ESMTP_MAILER_ARGS', `TCP $h 25')dnl
[code].....
View 1 Replies
View Related
Jul 5, 2010
does anyone have any suggestions on the best way to start gpg-agent on fedora 13?It's installed just not running. Is there a Fedora standard way to use it?
View 2 Replies
View Related
May 17, 2011
I have installed dogtag PKI in my redhat machine using EPEL repo. I am only using CA agent right now. I have generated certificates for my Redhat Directory Server using this CA instance. Now by mistake, Admin Certificate which was stored in my web browser for Certificate based login inside CA Agent has been deleted. Now i can't go inside CA Agent. Is there a way i can go inside CA Agent?
View 2 Replies
View Related
Apr 14, 2010
After my install I have no print control panel in the Gnome menu > System > Administration
What Packages do I need to install to be able to set up printers with the GUI?
View 2 Replies
View Related
Jul 7, 2011
I am trying to make my fedora 15 my gateway instead of my old D-Link, but I can't seem to get it working.
View 5 Replies
View Related
Jan 24, 2010
I can't edit the partitions in the install setup: I see a hard disk (sda) with no partitions or user devices, and 2 RAID devices.The behavior of OpenSuse 11.2 x64 installation is much alike.I have googled with every keyword combination I remembered, but I can't find anything that gives me a clue to what may be happening.I have already tried the 3 SATA configurations (the IDE that works with the installed Win 7, AHCI and RAID), but the result is always the same. Now the strangest thing is that in OpenSuse, fdisk and parted correctly identify the partitions. As far as I remember, parted isn't able to do modifications and fdisk says that the boundaries of the first, tiny partition, doesn't match the number of cylinders (or something like it). However, I was able create a partition with fdisk on the empty space and format it, delete it again and repeat the process a couple of times with no errors. The partituions are signed as msdos.
GParted from Ubuntu also shows the partitions, but I didn't try to do any modifications, namely because I don't think that it can solve my problem and I don't want to risk installing windows again.The hardware is brand new, a Asus M4A785Td-V Evo with an Amd Phenom II X4 965 and a WDC-WD5000ACCS-0 500 Gb HD. My lazyness made me asking the guys from whom I bought it to install Win7 Ultimate 64 in a NTFS partition, leaving half the disk untouched. They assure me that it is a "plain vanilla" ("next, next, next" installation . I guess I could try to see if I could do the partition setup in the "RAID" part of the Expert partitioner, but I have strong doubts that it solves the problem and it would be quite boring to conclude that I ruined the windows installation for nothing.Could it be any awkward problem specific of the motherboard / SATA controller or its drivers?
View 4 Replies
View Related
Jun 26, 2010
I am having an error during my Oracle 11g R2 installation on Fedora 13 that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button to skip this error. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
[code]....
View 2 Replies
View Related
Jun 13, 2009
I have a dual-monitor setup with a 1920x1200 lcd on the left and a 1280x1024 lcd on the right. In Fedora 11 on GNOME, using display settings, I can configure them properly.
KDE, however, is refusing to let me configure them as separate monitors. They are stuck permanently in mirrored mode, and I can't adjust positioning or anything. Here is a screenshot of the desktop with krandr running.
[URL]
View 9 Replies
View Related
Dec 7, 2010
When I start the Live CD I can see my harddrive and access it. But when I start the setup, it cant find the harddrive and I can not choose it. Ive tryed more than one cd's and another distro (built on Ubuntu). The hard drive works fine, Ive got Windows 7 already on it (help me change back to linux). I know the computer works fine as I once used another computer to install ubuntu on the harddrive and then moved the harddrive to my computer.
View 8 Replies
View Related
May 10, 2010
You are running tftpd as an on demand server i.e. it is only fired up when it is needed. Services run by xinetd are always run on demand. Have you actually tested if tftp on another system can access your PC i.e.
Code:
tftp your_pc_ip_address
View 2 Replies
View Related
May 11, 2010
I was wondering if anyone uses kmymoney? I am trying to setup an online account but I get errors when I try to map to an online account.my bank is M&T bank and quicken 2007 is no longer supported.
View 2 Replies
View Related
Jun 19, 2011
I installed the Kde desktop and i'm unable to setup a broadband dsl connection
i have done the settngs in network manager gave password username service name etc.
but the option for connection doesnt appear
the connection works properly in windows as well as gnome 3 desktop but not in kde
View 3 Replies
View Related
Jun 4, 2010
I have the following PC set up:
Dell 8400 with 3 GB of RAM with 3 160 GB SATA drives:
The first one has Windows XP installed on it.
The second one has been newly formatted and Ubuntu 10.04 has just been installed on it (20 GB / and 6 GB swap) with grub being installed on the first partition and not the master boot record. The remainder will be for storage for Windows.
The third drive is simply storage for Windows.
At this point I am able to boot XP just fine, but I'm not able to boot Linux. I just getting a blinking cursor or the PC just reboots when I choose Linux. I believe I have set up my boot.ini properly using:
C:Bootsectc.lnx="Linux Ubuntu"
After running dd if=/dev/sdc1 of=bootsect.lnx bs=512 count=1 and putting that file in place.
For reference, I don't believe this is a Linux problem, as much as I am simply trying to guide the ntldr to be properly pointed to a place where it can boot Linux. When I go into the bios and disable the first and the third hard drives, grub pops right up and I'm able to boot Linux with no problem, so that piece is fine. I think it's just now trying to get the correct syntax so I can boot Linux without having to disable drives and reenable them.
For kicks I even tried these syntax types in boot.ini:
multi(0)disk(0)rdisk(1)partition(1)="Linux11"
(i.e. 2nd disk, 1st partition ...etc...)
I read many troubleshooting documents on dual booting and so forth but I just can't get this right. For reference, I stated the way XP views my Hard Drives in the intro, which seem to be a different order than Linux sees them, yet I believe I've tried all the combos of settings for this to work (yet clearly have not). I have attached the output of boot_info_script*.sh here: [URL]. Boot Info Script 0.55 dated February 15th, 2010 ..... Devices which don't seem to have a corresponding hard drive.
View 9 Replies
View Related
Dec 10, 2010
I'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies
View Related
Jul 1, 2010
I tried to install fedora in my pc. First I insert fedora dvd and install as per procedure then finally system says like that your installation is completed please reboot ur system. So, before reboot I tried to eject my fedora dvd but it couldn't come out. So after click reboot I eject that dvd. And I got error msg like "media test failure exiting intel boot agent". How can I overcome this error.
View 3 Replies
View Related
Aug 11, 2009
I've been trying to setup RAID 10 with Fedora 11 on my desktop using this tutorial:[URL].. Everything has been going well, except when following the instructions and getting ready to format, it says I need to define / and boot partitions. This was never included in the instructions.
- LVM Volume Gropus
-- vg_jordan
--- fedoraRAID (type: ext4)
- RAID Devices
-- /dev/md0 (mountpoint/RAID/volume: vg_jordan ; type: LVM)
[Code]...
View 2 Replies
View Related
May 28, 2009
I installed Fedora 10 on a config that has /boot and / on md Raid 1 (separate devices). I did this with Centos 5.3 and it worked fine (or at least it booted without any problems). I have instaled Fedora 9 on a RAID 1 root md (no separeate /boot) md setup and it also worked. But now after booting the newly installed fedora 10 it just drops me into grub> . I booted rescue mode off the dvd and pooked around and don't see a problem, but don't know what ending up in grub> reallly imples so am not sure what to look for (my md setup is all there, the fs's are fine etc). Comparing things to another system all the /boot/grub/* files are present etc. I had the install do the grub install so the MBR etc should have been written.
View 1 Replies
View Related
Jun 10, 2010
i'm currently using ferdora 13. would like to know how can i setup xen virtualization on it?
View 1 Replies
View Related
Jun 27, 2010
I've downloaded the .tar.gz and extracted it. Now I can run it from shell but I want to place a menu entry for it. Any help from anybody?
View 6 Replies
View Related
Apr 27, 2011
i am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).
Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).
As soon as i issue ant install.source it ends up with some errors..
View 2 Replies
View Related
May 20, 2009
how to install fedora on a hdd that already has xp sp2 and setup a dual boot.
View 2 Replies
View Related
Jan 19, 2010
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
View 3 Replies
View Related
Jan 24, 2009
I just got a 1.5 tb I want to do a dual boot fedora 10 and vista. I don't have vista now. Can I install fedora 10 on a 200 gig partition and install vista on the rest when I buy it later?
View 3 Replies
View Related
Mar 8, 2009
Installing from live cd there aren't many choices for file system. If my info is correct reiser4fs can be used on fedora 10, if so how, if not what are the recommendations.
View 1 Replies
View Related
Apr 7, 2009
I am upgrading my old 40G hard drive to a new 160G one and want to know the best way to set it for use with my system. I currently have a Windows partition which I want to keep & reinstate onto the new drive. Then I want to have another 3 partitions for different distros.
What should I do as a first step when I put the drive in boot off a live CD. I am assuming that I will need to do. If I do a, # grub-install, will this then format the MBR and then create a small partition for /boot. Following that, do I just restore the Windows partition immediately after the /boot partition, and then create new partitions for the distros accordingly.
I would also like to create a seperate swap partition and then install F10. Is there an option in Anaconda to not use LVM (can't remember).
View 5 Replies
View Related
May 22, 2009
Does anyone know if Konquereor can be set up so that it displays the File Management View Profile when it opens?I am using: Fedora 10, KDE 4.2.3 and Konqueror 4.2.3
View 13 Replies
View Related
Sep 18, 2009
How to correctly install F11 on the same disk as Windows. I have created the partition but can't tell what F11 install to use to setup as dual boot with Windows XP Pro 64bit.
View 2 Replies
View Related
Nov 10, 2009
Have been tasked with a couple of Sunfire X2100 that I am slapping Fedora 11 onto for some high profile tasks around the office. Have two drives of the same size in each server and would like to have the two disks mirrored for redundancy. Admittedly I am new at Linux administration and am feeling over my head.
1. Can this be managed during the installation process of Fedora 11?
2. If yes, let me know the step by step please.
3. If no, I take it a cron job of rsync is going to be my best option.
4. Alternatives insights etc.
View 2 Replies
View Related
Apr 21, 2010
I got a Western Digital 500GB SATA drive, installed Vista on it no problems and made sure to leave about 120gb of unallocated space when setting up the drive. Went to install F12 via the live CD and it says no drive was detected. If I take the live CD out then it boots into Vista no problems so the drive is definitely connected OK.
I was using the 64-bit version of the live CD so I downloaded the 32-bit version but I have the same problem! The motherboard is an Asus P5QPL-AM if that makes a difference.
View 4 Replies
View Related
