Ubuntu Multimedia :: WinFF OGV To AVI Conversion In 10.04?
May 16, 2010
I recently upgraded to Ubuntu 10.04 and recorded a screencast with gtk-recordMyDesktop. Upon completion of the recording I attempted to convert the OGV file to an AVI, for ease of editing purposes, using WinFF.(And yes, I have installed libavcodec-unstripped-52) The result was an incredibly annoying error message Which stated:
Code:
FFmpeg version SVN-r19352-4:0.5+svn20090706-2ubuntu2.2, Copyright (c) 2000-2009 Fabrice Bellard, et al.
configuration: --extra-version=4:0.5+svn20090706-2ubuntu2.2 --prefix=/usr --enable-
[code]....
View 5 Replies
ADVERTISEMENT
Nov 1, 2010
i am using ubuntu lucid now and using ubuntu for 2years now.except nokia pc-suite i do not miss other s/w for windows.i tried to convert audio and video for using in nokia 5800,but i am not very successful mainly due to my inexperience.i installed winff and ffmpeg and searched a bit in this forum.found a few guides but mostly the converted files shows 'unable to play video or audio' in nokia 5800.
Code:
-r 29.97 -vcodec libxvid -vtag XVID -s 400x240 -aspect 16:9 -maxrate 1200k -b 1200k -qmin 3 -qmax 5 -bufsize 4096 -mbd 2 -bf 2 -flags +4mv -trellis -aic -cmp 2 -subcmp 2 -g 300 -acodec libmp3lame -ar 44100 -ab 160k -ac 2 -async1
this is the example of wiff preset command for nokian810(but not working for me).apparently there is no need for -i or output file(and here i get confused from the command lines posted in the forum.
[Code]....
View 9 Replies
View Related
Jan 19, 2010
Iam trying to use winff to convert a FLv file to AVI but i get this error message "Unknown encoder 'libmp3lame'"i know this is on my machine i looked.
View 9 Replies
View Related
Mar 8, 2010
I am trying to convert movies to mpeg4 or more specifically formatted to play on my blackberry curve. I followed installation guide from this tutorial [URL]. Everything installed and the program works but when I add a file and pick presets and hit convert the terminal pops up and says the following:
[Code].....
So I press Enter and the terminal closes, than... nothing happens just staring at the winff screen.
I really have no idea where to go with this. I found a link from the forums earlier on these common crashes but cant seem to find it again.
View 1 Replies
View Related
Jul 22, 2010
when i try to convert a flv video to mp3 by winff
it gets to me this:
le-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --extra-
[Code]....
are there a good video and audio converters?
View 1 Replies
View Related
May 13, 2011
How do I add a preset to the program winff a popular frontend for ffmpeg so that I can have MPEG4 audio support.
P.S. if this is in the wrong area of the forum I will move it if someone will tell me where it needs to go.
View 2 Replies
View Related
Jul 29, 2010
I recently updated lucid and since then i can't use winff anymore.
View 5 Replies
View Related
Nov 9, 2010
I am running 10.10 64-bit and am trying to get an option in WinFF to convert an MPEG file to an iPod compatible video. All of the HOT_TO guides I could find involve installing the FFmpeg libraries, which I have done as well as I could have.The problem is that within WinFF, I don't see anything different in the "Convert To ..." drop-down. The Wiki I am reading tells me to select iPod, but this isn't available.What do I need to do to get this to be selectable?
View 9 Replies
View Related
Dec 28, 2010
I want to be able to rip videos off ..... and put them on my ipod. I added installed "Download helper" which enables me to rip the videos off ..... in a flv format. When I try and convert the files to .mp4a (using the WinFF GUI) my terminal pops up and says "unknown encoder 'libx264'"
Here is the full message:
FFmpeg version SVN-r19352-4:0.5+svn20090706-2ubuntu2.2, Copyright (c) 2000-2009 Fabrice Bellard, et al.
configuration: --extra-version=4:0.5+svn20090706-2ubuntu2.2 --prefix=/usr --enable-avfilter --enable-avfilter-lavf --enable-vdpau --enable-bzlib --enable-libgsm --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-pthreads --enable-zlib --disable-stripping --disable-vhook --enable-gpl --enable-postproc --enable-swscale --enable-x11grab --enable-libdc1394 --extra-cflags=-I/build/buildd/ffmpeg-0.5+svn20090706/debian/include --enable-shared --disable-static
[Code]...
View 2 Replies
View Related
Aug 21, 2011
I'm tryin' to convert media files to other formats using winff.But nothing happens ! I mean a terminal window popping up and then nothing happens to the files , I tried many formats like (wmv,avi,flv,mp3,wma etc.) to others , and I have all prerequisites . I'm not sure
- ffmpeg (Multimedia player)
- Gstreamer ffmpeg video plugin (Codecs to play formats)
- libmp3lame
- libmp3lame (DEV - I thought that this could be useful)
and this is an image off winFF on my desktop ,
View 2 Replies
View Related
Apr 26, 2010
The only preset for mobile phone is mp3. All video presets are gone...how to install them? Im using lucid atm
View 4 Replies
View Related
May 21, 2010
I have a video - taken on my mobile phone. In totem, I get sound and video: lovely. However, in Openshot I don't get sounds, and in WinFF it tells me "Unsupported codec (id=7372" for the audio stream. Why, when both are using FFMpeg do the installed codecs work differently in different programs?
View 2 Replies
View Related
Jun 1, 2010
I haven't used WinFF before yesterday. Looks simple so I tried to convert an AVI file of 600MB to DV and ended up with an 8GB conversion.For device preset I used Raw DV for Pal Fullscreen as I'm in Australia.Does WinFF always produce such large files?
View 1 Replies
View Related
Mar 17, 2011
Just updated WinFF to version 1.3.2-1.1. Since then it won't start up any more due to a floating point exeption. System: OpenSUSE 11.4 (x86) + KDE 4.6.0 Debug info:
WARNING] Out of OEM specific VK codes, changing to unassigned
[WARNING] Out of unassigned VK codes, assigning $FF
ERROR in LCL: TLRSObjectReader.SkipValue unknown valuetype
Creating gdb catchable error:
$080D1568
[Code]...
I had the same error with earlier versions of WinFF in earlier versions of OpenSUSE. Then I could fix it by changing the KDE window styles. The error also occurs with the WinFF qt-version.
View 1 Replies
View Related
Apr 1, 2010
I have generated some .eps figure which I needed to show one by one. I converted them using convert file.eps file.jpg but the generated files were kind of blurred (not much, but they are not of the same quality as the .eps files) Is there anything to do to get a good conversion? Also, which is better, is/are there any image viewer package that would help show the .eps files as .jpg files? I have tried, gthumb, gqview, f-spot, image magic (display).
View 8 Replies
View Related
Jan 28, 2011
Got some TV progs in MKV format which are jumpy when played through VLC. Other shows in the series AVI format play OK.
Are there any open source programs out there that can convert MKV to AVI?
View 9 Replies
View Related
Feb 21, 2010
Is there any software out there to convert *.mov files (from a digital camera) to *.mpg files, of which way I have to go?
View 2 Replies
View Related
May 27, 2010
It seems more and more people are encoding with the MKV container on bit torrent these days, and a lot of the shows I'm watching are starting to release almost exclusively with .mkv formatted videos. This is not a problem if I want to watch the shows on my computer but I've become accustomed to watching them on my PlayStation3 using my thumb drive. It seems the offical documentation for the PS3 includes a list of supported codecs [URL], but when I use FFMPEG to convert with libxvid video and aac audio in the MP4 container my PS3 says the output video is not supported. I've also tried most combinations of libxvid, libx264, mpeg4 for -vcodec and aac, libmp3lame for -acodec in several different container formats but nothing seems to work. I have found one option that always works:
Code:
ffmpeg -i inputfile.mkv -sameq -ac 2 outputfile.mpeg
I don't like doing it this way, however, as the output file is twice the size and the audio quality is terrible. If I don't reduce the audio channels to only two using -ac 2 FFMPEG throws an error (apparently MKV audio supports 6 channels). And preserving the video quality in MPEG video using -sameq produces too a large file (and I prefer to keep my files as lossless as possible). Ideally I want to save the files on an external HD I have but if a single episode of a show is 1.5 GB it's not very pratical.
Anyway, the PS3 docs say it supports h264 and xvid with aac audio, but apparently I'm doing something wrong. Has anyone sucessfully used FFMPEG to convert an MKV to MP4 for use on a PS3?
View 3 Replies
View Related
Feb 2, 2011
I've been trying out a few scripts (I hacked one myself) to convert HD MKV files to MP4 containers. Specifically, the main issue I'm trying to solve is converting DTS -> AAC audio. I noticed the scripts I used before used ffmpeg. I tried NeroAacEnc and found the audio quality is much better. Unfortunately, I'm having issues with MP4Box accepting the audio NeroAacEnc creates. I also hit one other issue and that is making sure HxW size of video is in multiples of 16. I was trying to use ffmpeg pad filter for that but couldn't figure it out.
View 1 Replies
View Related
Apr 3, 2010
I am Ubuntu user, having only recently left the stinking, bloated corpse that is Windows ($225 for an upgrade to Win7 is just obscene). I have a huge library of Mp3's, which I have managed to enable support for on Ubuntu, and have installed Amarok, as I didn't think much of rythmbox.
So far so good, but I still need a program to rip/convert the rest of my CD's, and to convert lossless files. I'm looking for a CD ripper with similar functionality to EAC (Exact Audio Copy). One aspect I am looking for is the ability to manually change the Mp3 encoder used by the program. I am partial to the lame 3.98 encoder, and would like to keep using it. If the program already uses this encoder (or a close version), then that's fine and no need for the ability to manually change the encoder.
View 3 Replies
View Related
Apr 28, 2010
So I typically use cat to put my avi files together.. but today I figure lets see about ripping over so I can watch on my Droid.
As nobody has a xvid or vlc player on the droid (yet.. coders are doing alot for Android ya know) I will have to convert the video down and change the format.. So.. can anybody tell me a mencoder command line directive to get as close to this as possible (I found ipod settings leave the actual video lacking).
Video
Format MP4
Encoder H.264
Resolution 854 x 480 (or 720 x 480; 480 x 320; 320 x 240)
Frame Rate 12 fps - 30 fps
[Code]....
View 1 Replies
View Related
Jun 6, 2010
Using Miksoft's Mobile Media Converter, and I cannot convert files to MPEG4.[URL]Converting to MPEG1/2 works fine, but trying to convert video for my son's PSP always produces an error. Here's the output:
Code:
>> Command executed:
"/opt/MIKSOFT/MobileMediaConverter/lib/mencoder" -oac lavc -ovc lavc -of lavf -lavcopts
[code]....
View 3 Replies
View Related
Sep 25, 2010
I'm trying to figure out how to convert .ogv video files to put on my moto droid. Has anyone did this? How??
View 1 Replies
View Related
Sep 1, 2011
With Banshee, I am easily able to put music onto my iPod and have it convert my FLAC to something that the iPod can read. But is there a way to control the quality of the conversion. I don't really want my FLAC to go down to like 192kbps. Are there any settings that I am missing or any files that could be edited to make this happen?
View 4 Replies
View Related
May 1, 2010
Does anyone know what I should do to read a dvd disc that I recorded on my dvd recorder off the satellite decoder. When I look in winxp it shows the contents which is only a video_ts folder and no audio folder. Inserting the same into the pc with ubuntu 9.10 running the drive reads the disc but I then cannot access the contents, which I want to convert to a divx file or similar. Will I have to use my Windows system for this?
View 1 Replies
View Related
Oct 29, 2010
Is it possible to convert a 2.1 channel mp3 or any video file to get a respective 5.1 file permanently so I could play them on external music system which is 5.1 speaker system. Any sites where i can usually songs n video with 5.1 channel.
View 2 Replies
View Related
Dec 29, 2010
I had some success with handrake to rip dvd's in older versions of ubuntu. i now have a clean install of 10.10 and know that handbrake is not compatible (even tried the ppa of the nighly builds without success). In looking for alternatives, i cam across arista transcoder....which seems perfect for my needs (simple), but whenever i put a dvd in the queue its gives me an error that says conversion failed....no valid dvd title found. this happens no matter what dvd i use and no matter what preset i choose.
View 2 Replies
View Related
Jun 6, 2011
I have some downloaded files of radio programme from BBC which are .aac. I have never come across this type before. Googled it so now I am a bit wiser and VLC seems to play them without problem but they are not accepted by my upnp client devices which are happier with flac or mp3. I would prefer flac but what is the preferred conversion software.
View 3 Replies
View Related
Jan 3, 2010
I spent about a half hour wrestling with different website tutorials about how to convert a file with ffmpeg and figuring out how to get all the video quality options right. Then I discovered you can just use the -sameq option and it figures it all out for you if you don't want to change the vid quality but just want it in another format. Thought I'd leave this on the site in case anyone else finds himself in the same boat.
View 1 Replies
View Related
Mar 27, 2010
I'm using Rhythmbox to manage my music collection. I have ripped my CDs into FLAC files. I'm using the Motorola Milestone (The Droid) as my music player and syncing it using Rhythmbox.
Now, when I transfer my music files from Rhythmbox to the Milestone, it automatically convert the FLAC files to MP3. But the conversion is set to 128Kps.
How do I change this default conversion rate? Or even, how do I change to another conversion format altogether?
View 1 Replies
View Related
