Ubuntu Multimedia :: 1080p Video Playback Working With NVidia Ion And Lucid?
Jun 6, 2010
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. Do you or does someone you know have the same setup as I do? If so, do they have 1080p video playback working? If so, what driver are they using? I've tried following every guide I could find, but no luck so far. I have libvdpau1 and libvdpau-dev installed. I have the nvidia 195.36.24 driver installed (I used the nvidia installer). I have mplayer installed (which I compiled from source with --enable-vdpau).
I try to run mplayer with this command:
Code:
mplayer -vo vdpau -vc ffh264vdpau path/to/myfile.mkv
I get the following message in my terminal:
Code:
Error opening/initializing the selected video_out (-vo) device.
I have libvdpau-dev and libvdpau1 installed.
After Googling this problem, I found a post that suggested the following steps:
Code:
sudo add-apt-repository ppa:nvidia-vdpau
sudo apt-get update
sudo apt-get install nvidia-glx-195 nvidia-195-modaliases
It turns out that I had already added the nvidia-vdpau repository. However, despite that, I get:
Code:
E: Couldn't find package nvidia-glx-195
The same problem exists for the nvidia-195-modaliases package. Do these packages exist? Is there some other way to get them?
Today I installed the latest Ubuntu, added VLC and... the acceleration is not there. When I compiled VLC myself on 9.04 I had a checkbox to enable hardware acceleration in the FFMPEG codec settings but this checkbox is not present in the VLC that was downloaded to my 10.04 by default.am I doing something wrong or is the hardware acceleration simply not there? And what do I have to do to enable it? Is FFmpeg in 10.04 compiled with VAAPI support? Is VLC in 10.04 compiled with VAAPI support? Do I need to recompile both or just on of them? I have just updated my system and now I'm not able to watch the family movies from my HD camcorder.
I have a high resolution file (1080p) encoded with H.264 and when I play it back, it lags at certain parts (and enough parts to destroy the job of watching the video).
I don't think that my computer is that crappy and it has been able to play many H.264 encoded files with high resolution - so there is always a possibility that this file is just encoded poorly (lacking a better computer, I cannot test).
For information, I'm running Ubuntu 9.10 64 bit. I have a Intel Core2 Quad CPU Q9550 (@2.83 GHz). I have 8 GB of RAM (forgot the speed off the top of my head). And a Nvidia GeForce GTX 280 (1 GB of memory).
During the playback, the RAM is far from being completely used; however, it seems that one (and only one) of the cores of my CPU becomes saturated at 100% precisely at the moments in which the file lags. When the CPU utilization is below 100%, there is smooth playback.
My question is - is it possible to use all four cores during playback, or is such a process not capable of easy parallel processing.
Another side question is, how can I be sure that my GPU is being used in the decoding process - or is that also being under-utilized?
currently using nvidia accelerated graphics driver (version 185) and a nvidia 8800gt. cpu is an intel c2d e6600, so it's quite a fast pc. video playback is extremely choppy to the point of being unwatchable. it affects all applications that i have tried, such as vlc, movie player and flash videos in mozilla firefox. videos on videos seem slow but playable, but when i try to watch them in full screen there's a drop to about 5fps. cpu usage reaches 100%. scrolling is also slow on large webpages. disabling compiz makes no visible difference.
before i installed nvidia's driver, videos played perfectly. videos play fine in windows xp. it seems as if nvidia's driver is using the cpu to 'process' videos, instead of the graphics card. other than that, ubuntu 9.10 is lightning fast... so what's going on here? i have resolved one issue, that is flash player's performance in firefox. followed instructions [here] and videos is now smooth in full screen. other videos, however, are still stuttering and spiking cpu usage. this must be a widespread issue, but the lack of information on the web shows otherwise.
I am preparing to purchase a new laptop, with Ubuntu 10.04 built in, from System76 with 8.0 GB DDR3 1333 MHz RAM, ATI 4570 graphics with 512 MB GDDR2 memory, 500 GB 7200 RPM SATA II hard drive, and I get to choose a CPU. I am wondering: 1) Would I get better 1080p video playback performance with a dual core Core i7-620M or quad core Core i7-840QM CPU? 2) What is the best playback software in Ubuntu that takes full advantage of such a CPU, and also the GPU?
I ended up getting 1080p playback working perfectly with vlc on my 1201n about 2 months ago, but then I decided I'd reformat my system to clean it out a little. There's other tutorials out there, but none are as straightforward as that one. I literally copy and pasted the commands and it worked like magic...now I have the latest nvidia driver installed, but vlc 1.1 won't let me check the GPU acceleration box under Preferences > 'Input and Codecs'.
I remember that this tutorial gave you PPAs for debs of vlc pre-1.1 git files, and a list of all the necessary software to install (vlc, vdpau, smplayer). It was hosted on a site other than ubuntuforums, and it was the only one that worked at the time for me.
Anyone know what I'm talking about, or give similar links? I think with this new nvidia driver stuff is actually being slowed down a bit, but that doesn't explain why VLC won't let me activate GPU acceleration.
When I watch a HD movie, the video will freeze momentarily sometimes. Would a 8400GS or 9600GT take care of this? My video card is a 7300 le, CPU= Phenom 8450 Memory= 4gb PC2-6400 Power= OCZ Fatal1ty OCZ550FTY 550W
I'm doing an install for a friend, the machine is a Gateway with AMD Turion64. The install required the 64 bit version of Lucid 10.04 RC. When I try to install the NVIDIA hardware driver, upon reboot, it flickers, fails, and tells me to use low-setting graphics mode.
i upgraded to lucid, but now my video has stopped working... videos and iplayer work fine. the problem is with any videos (mp4, flv) opened in vlc or mplayer. i can hear sound fine but the screen is black. the same happens in skype. i followed the comprehensive guide and did all the steps, but no joy.
When I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
video playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL] - Video resolution seems to change during video playback - Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU - 8 GByte RAM - Biostar TA890GXE - Samsung LE40M86BD, connected via HDMI (and only HDMI) - Mythbuntu 10.10 with proprietary drivers installed - Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
I have the nvidia sound card built into my motherboard. Just a few hours ago it started to just stop making any noises what so ever. I rebooted but to no avail. I finally was able to find a fix by purging pulse AND alsa, then reinstalling them and rebooting. The problem is this will only allow my sound to work for about 10-15 mins. Kinda hard to watch "'Neath the Arizona Sky" if you gotta reboot every 15 minutes or so...
I have also purge and reinstalled ubuntu-desktop and that will work temporarily and extend me out another 10-15 mins from when it stopped, but then I still have to reboot.
I am using 10.10 Maverick 64 bit and have been using it for a while, this is the first time this or any other problem has occured.
I have been through the forums and checked every thread I could find with a Bingle search that was in any way related to random sound stoppage. I have tried most of them (did not try the ones that were specific to other cards as far as editing the .conf's for those cards)
I'm having some problems with flash in mozilla and chrome. video playback is fine but none of the buttons are working.for example i cant pause or change the volume. pretty sure my flash is up to date. i have ubuntu netbook remix on another pc without this same problem.
I have installed the recommended driver for my nvidia card (185), and after much fiddling finally got my config file to stick and boot correctly, however I can't see the output of the media player or the DVD player. The files play because I can hear them, but I don't see any output. I have moved the depth to 16 bit, but I still don't get anything.
I have NVidia 8400gs. After fresh install my splash screen is at good resolution but after installing nvidia drivers I got resolution issue at splash screen. And when playing hd files in movie player i.e. totem I get slow frames. and in mplayer I got this error "could not open directshow codec wmvdmod.dll" but file plays in bad quality than windows.
I'm sorry if this was asked before (i know it was but never worked for me) 2 days ago I installed ubuntu 10.10, my very first linux OS and I immediately fell in love with it.The only problem now, is tearing during video playback (I'm a perfectionist with a thing for fine details, so this is literally killing me)
I have nVidia 9200M GS (HP laptop) I've set nVidia setting to sync vblank and disabled it in compiz I've also disabled PowerMizer..
I love the system to give up some vsync issues in moving windows, but i just can't get over video tearing. I'm ready to install anything, change anything, even do a new clean install to get it working. UPDATE: Installed SMPlayer, works fine but drops couple of frames every 5 secs or so (more annoying than tearing lol) is there any specific settings that can fix that?
Both MP4 and OGV playback completely weird on my Ubuntu 10.04.2 laptop:
The resolution/length/etc is correct, but the picture is all weird. Webm doesn't work at all.
I tried mplayer, kmplayer, smplayer, gxine, totem and kplayer. All the same.
However, the exact same video's play back normally in HTML5 pages with a bunch of browsers on the same machine. They also play back normally on a Windows machine. There is no DRM involved.
Aren't these gstreamer en mplayer based players supposed to handle this correctly?
This is an Intel Core i3 machine with Intel HD graphics.
i am loving the ubuntu 10.10 interface.my laptop is a toshiba satellite l450 (3gb ram + 2.10ghz amd proc essor. i use a ati radeon hd 3200 graphics card.i have to manually adjust the sound settings if i plug in a headphone or a hdmi cable to suit the necessary output. windows did this automatically.my video quality is very very poor. if i run videos on any browser or watch a movie (avi file) on totem or vlc it is very jumpy and the sound is often out of sync.
Your Refresh Rate and Outputs HAS TO be the same freq as your monitor.This overwrites whatever you have set in NVIDIA X Server Settings.I use this on my laptop with an NVidia 8400GS card and on a Revo 3700 (with NVIDIA ION) through SMPlayer and XBMC.You can have choppy free and 'tear free' playback AND visual effects on!
Lucid installed without any errors that I can see of off the main i386 installation CD, but after booting I get no display. Even in recovery mode. The monitor doesn't go into sleep mode and I can tell that the OS is actually running the background because I can do a Ctrl-Alt-Del and do a proper shutdown. I'm running an nvidia GT 9500. Everything is working fine on Karmic.
I have a Dell Latitude CPi that has 400MHz Intel Processor and 256 MB of ram. It has a Neomagic Corporation NM2360 [MagicMedia 256ZX]. I have it set to 16 bit color depth and it is using the neomagic driver. My problem is that it cannot play any video of any size flash, or saved to hard drive. It has a fps so low that I can see it rendering each frame going across the screen. It doesn't seem to have a problem with animated pictures, just actual video files. I don't know whether or not this matters but the card set is known to not support 3d acceleration. I can run any commands in terminal and have a good understanding of the linux environment. This problem has occurred under Ubuntu and Xubuntu and still happens if I use a light weight WM like fluxbox.
When trying to playback DVDs in VLC media player, I have to switch the video output driver to get any playback.If I leave it on "Default" (which I think is defaulting to "XVideo Extension Video Output"), I get a solid green or blue screen (which I also get with "Xvideo Extension Video Output")If I switch it to "OpenGL Video Output", I get proper DVD playback but it is kind of pixelated and ugly.If I switch it to "X11 Video Output", I get DVD playback that is very crisp and sharp, the image quality is great.unfortunately, the colors are completely messed up and the blue is completely saturated.I've played with the color settings (especially the Hue setting), but I can't get the colors to look right.
I'd really like to use the x11 video output since the quality is the best, but I can't get the colors right.the first one (Screenshot.png) is OpenGL output, and the second (Screenshot-1.png) is X11 output.It's also worth noting that I am on an IBM ThinkPad R32 with an ATI Mobility Radeon 7000 (or M6, or M6 LE, whatever you wanna call it).I'm running a fully updated 9.04 Jaunty installation.
I've installed Ubuntu 9.10 and the prime reason for giving it a go is due to the media center capability with apps such as Moovida and LinuxMce.
Unfortunately during video playback [either divx or flash] there appears to be a random line or lines which flickers on the screen when the video is in fullscreen mode.
I'm using an ATI x1900 video card and have tried using both Tote and VLC, and I have also tried installing the fglrx.
But, both with and without flgrx installed, under the section 'Device' in xorg.conf it says that the driver is 'vesa'.
I don't know how to disable the default ATI driver to enable fglrx, or whether I am going off on completely the wrong tanget and should be looking at something else.
Or is there better support for my type of card in Ubuntu 10 as I don't want to go back to Ubuntu 8 which is the last supported version of the os that ATI developed a driver for my card.
I have a 30" LCD with 2560x1600 pixel resolution. I would like to make and play videos at this resolution, but software decode is too slow, and the GPU accelerated decode (VDPAU) maxes out at 2048 pixels. It might be possible to decode 2Kx2K and cut-and-paste and reorganize the rectangles to fill 2560x1600. But someday I plan on getting a 4K screen (4096x2160 pixels) and I would like to support that too. For that it seems two video streams decoded by two GPUs and exactly synchronized would work.
I have two Ubuntus installed. A 10.04 and a 9.04. In 9.04 if I watch a video in Firefox, it works very smoothly and nicely. Using the "top" command, totem-plugin-vi is using the most cpu time at about 16%, and xorg is using about 5%. But in 10.04, totem is using 72% and xorg is using 26%, and it looks really choppy. I think watching DVDs is the same way. I checked "Hardware Drivers" in the System->Administration menu (in 10.04) and it said "No proprietary drivers are in use on this system." I'm guessing maybe I'm using different video drivers on each system, but I don't even know how to check. and here is an excerpt from lspci:
Im running Xubuntu 9.10 on my compaq v2000 laptop. My problem is that the video stream playback is very choppy. I have tried the method found here [url] but when i get to the part where I have to type "echo base....." when i hit enter my terminal replies with "bash: echo: write error: Invalid argument"...How to fix this choppy video streaming playback...
