Ubuntu Multimedia :: K9copy "requested Bit Rate Too Low" Error On 2nd Pass
Nov 5, 2010
I am having a great time very quickly migrating from Windows through Ubuntu.
One area that I am still having trouble in is transcoding VOB into DivX, XviD, AVI, etc. I have been succesful one time using k9copy and it made a great looking avi. Since that time I get a failure on the 2nd pass. It seems as if the problem is related to the line in the error log "requested bit rate too low". So I changed from filesize to bitrate selection in the wizard and set it at max (99999). This got it to start the 2nd pass but still ended up crashing about 3/4 of the way through with an unexpected error message. Undaunted i tried again with the same setup and options. This time I once again got the bitrate too low error on the 2nd pass.
I have tried other GUI apps like avidemux (sound out of sync with that one), WinFF (not merging the vob's together), and others without satisfactory results. It would be great if I could get k9copy to work as it did the first try as it did exactly what I am looking for.
I have mencoder and all the depedencies installed (I believe). I am running a quad core amd64 bit processor and ubuntu 10.04.
It is just puzzling to me that k9copy worked flawlessly the first time and now nothing but trouble.
These are VOB's that have been put together by IFOedit from files dmuxed by DVDdecryter (under wine) stripped of copy guard. I take the ac3 soundtrack and convert it into WAV so that i can add a commentary (rifftrax) in audacity, then convert that back into ac3 and combine it all together again. I have been doing this for some time in Windows, and can now do everything in Ubuntu except for the avi transcode (really bothersome to reboot into windows just to run DivX Pro converter).
View 1 Replies
ADVERTISEMENT
Sep 30, 2009
i used my windows box to connect to ftp(fed box) and i keep getting an error saying "The requested name is valid, but no data of the requested type was found." does anyone know why i cant connect?
View 1 Replies
View Related
Nov 7, 2010
I have made the jump to Ubuntu, I have installed 10.10 on a Dell Precision 360, I have sound on VLC player, internet radio, but when I want to preview in K9copy I see the Video but hear no sound.
This may also be the issue with dvdshrink under wine, which loops fo about second or 2
I dual boot between Windozs XP professional and Ubuntu
View 2 Replies
View Related
Feb 17, 2010
Using the Synaptec route, I can only install version 2.3.3, which is backlevel (latest is 2.3.5)
I have tried updating Synaptec, tried downloading directly from the website, but cannot figure out how to compile, etc.
how I get the latest version available in Synaptec, or another way to get the latest?
View 2 Replies
View Related
May 23, 2010
I am using k9copy to extract the five titles in a DVD ISO-image to separate avi-files. I selected the copy option for both audio and video, and made sure all the tracks were selected. The resulting avi's played without sound in Totem. VLC gave an error message that audio format " []" was not supported.
I then did the extract again, selecting aac for the audio processing. The result was the same.
Again, with mp2, the same result.
The DVD contains audio in "mp2 2ch 48KHz 20bps" format (information shown by k9copy).
When I play the video from the ISO, using VLC, sound is ok.
How can I get k9copy to extract the video with sound?
View 2 Replies
View Related
Dec 25, 2010
I'm trying to use K9copy in Ubuntu 10:10 to shrink some videos from a straight iso copy down to a 800MB avi file. The video seems to copy fine and the picture looks fine but when I try play it in VLC theres no sound.
Is there something I'm missing? And yes I played the ISO in VLC and had it play with sound fine.
View 3 Replies
View Related
Feb 17, 2011
I want to copy one track/chapter from a DVD to an AVI file, but the sound is not copied only the video. I
- selected track/chapter by clicking checkbox
- selected 'MPEG-4 encoding' for output
- used default settings (codecs were 'copy' for video and audio)
- clicked DVD copy action
Result:
1. Movie Player: no sound
2. VLC: Error message 'No suitable decoder module: VLC does not support the audio or video format How can I get sound and video?
P.S.
Using k9copy version 2.3.5. I tried all audio codecs available in the k9copy Audio tab. They failed in the same way as before. The chapter list contains 'audio 1 Unknown pcm 2ch 48kHz 16bps'. I don't know how to interpret that. Also installed and tried AcidRip and Dvd:rip. Sound worked fine for both. AcidRip did not show any audio settings. Dvd:rip showed:
Select track: 1: xx lpcm 48kHz 2ch => 1
Codec: MP3
Bitrate: 128 48kHz
Quality: 2
Filter: None, volume rescale only
Volume rescale: 0
Again, it does not mean much to me.
View 1 Replies
View Related
Apr 9, 2011
If I use K9Copy to compress a 6.4 gb DVD to a 4.4gb ISO files, it heats up the CPU and the machine shuts off. When I do this with system monitor ON, I see 160% to 180% CPU usage. I guess this is due to dual core on my Gateway laptop.Then I installed DVD Shrink and tried the same by running DVD Shrink using Wine. This caused the same problem.I did not have this issue when I was using Windows Vista. Is there anything that I can do to avoid this problem?
View 7 Replies
View Related
Jul 28, 2010
I have just installed Lucid Lynx but cannot get K9copy to work at all. It loads, but closes as soon as I try to open the dvd. Anyone else getting similar problems, or, more to the point, does anyone know how to fix it?
View 2 Replies
View Related
Jan 3, 2011
I had some problems upgrading from 10.4 to 10.10, and I had to select the "safe mode" equivalent option in the grub loader to boot, or else my system would hang at the screen with the dots before the login prompt. I restored the packages and now my system works. I am not sure if this is relevant to my problem.
K9Copy worked fine prior to upgrading to 10.10, now it crashes as soon as I load it. I have searched but found nothing relevant to my problem.
View 1 Replies
View Related
Oct 16, 2010
I have a problem with K9Copy's back up system it cannot seem to shrink a DVD9 down to 4.7gb to fit on a standard 4.7gb DVD Disk, how to correct this? As it renders K9copy totally pointless for me.
PS: This issue didn't exist on Ubuntu 10.04LTS
View 2 Replies
View Related
Jun 2, 2011
I finally got K9copy to work and I'm using it to extract DVDs to my hard drive. I extract a dual layer DVDs it becomes a 5GB DVD. In the settings, I have DVD size as 9GB because I assumed this would not cause any compression. When I use k9copy assistant to change the shrink factor before ripping, I can only change the shrink factor of some titles to 1.67 from 2.50. I want the shrink factor to be 1 since this seems to ensure that the output of the file is the same size as the title on the dvd. I want the copied DVD to be the same size as the original. I have no problem with hard drive space since I have 6 terrabytes of free space.
View 6 Replies
View Related
Nov 28, 2009
Running Opensuse KDE 11.2 64bit. Trying to backup DVD, but no sound after playing ripped copy. After looking at the settings in K9copy and DVD95, the sound section says "Unknown AC3" where it normally says "English AC3". I've tried mencoder and ffmpeg.
View 7 Replies
View Related
May 25, 2011
I have message: error 12: invalid device requested.It happen when i choose ubuntu partition. before this error message the netbook run perfectly with dual boot. ubuntu is 1st option winXP is 2nd option from the list(maybe grub ?) Since i want winxp as the 1st option instead ubuntu,i change the file /boot/grub/menu.lst. what exactly i change is just cut and copy the winxp part to above ubuntu part.
if i press 'e' in ubuntu show:
root (hd0,6)
kernel /boot/bla..bla.bla..
initrd /boot/bla..bla.bla..
[code]...
View 1 Replies
View Related
Mar 5, 2011
I installed squid on my centos and I tried to follow some guides but it still gives the same error
Quote:
ERROR The requested URL could not be retrieved
While trying to retrieve the [URL]...The following error was encountered: Access Denied. Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.
[Code]...
ZON-BFC0 is the name presented in my wireless connection, plus the actual ip I'm using there is the ipv4 I found with a quick "ipconfig" search on DOS.
View 7 Replies
View Related
Apr 14, 2010
I'm running Ubuntu 9.10 and Gnome-Do 0.8.3.1. I have two issues I hope someone can help with.First I've managed to add two folders to the doc, however when I hover over the icon the name is displayed as "..." This might be because the path of the folder is "/home/eric/Desktop/500" which is a link to "/mnt/500" I cannot add the folder without the error listed below. When trying to add folders, and some applications I receive the error:
"Docky Error - Docky could not move the file to the requested Directory. check file name permissions and try again."
View 1 Replies
View Related
Dec 4, 2009
I have installed Windows 7 followed by Fedora 11. Everytime I install Fedora 11 with Win 7, the first to boot, I get BOOTMGR missing. Later I used "df -h" command to see the disk file usage fdisk -l" to see the info regarding Disk Partitions. Went into the /boot/grub/menu.lst and modified the order. I set the partition where I find the bootmgr.exe.mui, there was another file named "memtest.exe.mui in the same file.
I navigated to the above said through Fedora 11. Located inside the Win 7 installed directory /boot/en-US/
When I changed the menu.lst file, I get a new error Error 12: Invalid device requested when I tried to boot Win 7. Does that mean that Fedora 11 GRUB is not getting the bootmgr.exe.mui since its 2 levels inside the boot directory ??
View 2 Replies
View Related
Jun 7, 2010
Every time I upgrade my system I run a post install script. This script made some harm to the network start that prevents sshd from starting, but I was unable to detect the problem. In my boot.log I found this:
[...]
Starting NetworkManager daemon: [ OK ]
Starting Avahi daemon... Jun 2 14:58:48 Antares kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
[code]...
So there is a "bind to port 22 failed" probably caused by "eth0: link is not ready", but after the sshd init script fails the eth0 is ready...
View 9 Replies
View Related
Aug 2, 2009
I get this error:
Error: requested datatype primary not available
# rpm -q centos-release
centos-release-5-3.el5.centos.1
None of the following actions fixed the error.
# yum clean all
# rm -f /var/lib/rpm/__db*
# rpm --rebuilddb
[Code]....
View 5 Replies
View Related
Mar 7, 2010
today there was problem with isp but we fix it now other machine run internet fine but when we run through squid proxy machine it give this message to all users. what fields column values config i should check it. i also reset the cache make empty folder. restart machine also service clear the logs . it is on centos 5.4
see below message
ERROR: The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: Read Error
The system returned:
(104) Connection reset by peerAn error condition occurred while reading data from the network. Please retry your request. Your cache administrator is root.
View 1 Replies
View Related
Aug 13, 2009
I have got squid 3.0 stable 13 installed on a new centos5 box .I have used it on other centos5 ones and it has worked really well.It didnt give any error messages during installation on this one until i used the proxies in the browser.I have used it on other centos5 ones and it has worked really well.But with this box I am getting this error in browser-The following error was encountered while trying to retrieve the URL:Yahoo!Socket FailureThe system returned: (99) Cannot assign requested addressSquid is unable to create a TCP socket, presumably due to excessive load. Please retry your request.I have tried many options for http_port but to no avail.I have never seen this error before with and am totally clueless
Excerpts from cache.log
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2009/08/13 05:57:17| Squid Cache (Version 3.0.STABLE10): Exiting normally.
[code]....
View 2 Replies
View Related
Apr 19, 2010
I try to install IPsec-Tools on Slackware 13, but I get an configure error: configure: error: Security Context requested, bu no selinux support! Aborting. I'm linux newbie and I'm following a slackware-basics tutorial, I did as in the tutorial, but the configure stops and aborts:
Code:
# CFLAGS="-O2 -march=i486 -mcpu=i686"
./configure --prefix=/usr
--sysconfdir=/etc
--localstatedir=/var
[Code]...
What can I do? How can I enable/install selinux support? I guess it's related with AH and ESP protocols, which in my kernel are defined as modules (m). If so, how can I enable them?
View 5 Replies
View Related
May 26, 2009
I am in the process of writing a web-application using apache,mod-python and cheetah. I installed apache2, mod-python and cheetah and also enabled the userdir module in apache2 so that i can host the webpages inside my public_html folder.
The public_html folder has a folder named 'site' which gets displayed when I type "url" in the browser. There are subfolders inside this 'site' folder and the site folder also has an index.html page inside it.
But when I click on the site folder in the browser, I get a 'Requested url /~myusername/site/ not found'. There are files inside the folder with 777 permissions and still I get this error.
I use Ubuntu Jaunty with the following configuration - 'Apache/2.2.11 (Ubuntu) PHP/5.2.6-3ubuntu4.1 with Suhosin-Patch mod_python/3.3.1 Python/2.6.2 Server at localhost Port 80'.
These are the lines I have added to the /etc/apache2/sites-available/default file
Code:
<Directory "/home/myusername/public_html/site/">
SetHandler mod_python
PythonHandler mod_python.publisher
PythonDebug On
PythonAutoReload On
View 1 Replies
View Related
Feb 17, 2011
I'm trying to copy DVD's to 700mb so that they will play in DIVX on my DVD player. I'm using K9Copy 2.3.5.I've set the options to:And also tried changing the codec to MPEG-4 (DIVX 4/5)But when I select the title I wish to copy, no MPEG-4 tabs appear at the bottom of K9Copy to adjust the settings for each chapter.This means that the avi file created is 3.2GB.
View 2 Replies
View Related
Jul 11, 2010
I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):
Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat
View 5 Replies
View Related
Jun 16, 2010
Since a few days, zypper start giving me this errors when i try to update/install packages
Here is the output:
[Code]...
error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found
View 2 Replies
View Related
May 6, 2009
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies
View Related
Jun 5, 2011
I just built a home media server. It's using a Gigabyte E350N-USB3 motherboard with the AMD Fusion processor. So far, everything seems to be working fair enough. However, when it comes to video playback via an HDMI cable to my TV, it's unwatchable. It is okay during slow scenes, but any sudden movement or high action scenes and the problem becomes obvious.I don't know how to explain it other than it appears to have a problem refreshing quickly enough. I see horizontal lines across the film. I originally thought it might be due to low quality AVI files, but I just tried a DVD and it did it just the same.
I'm pretty knew to Ubuntu, so I'm not sure if there are some settings I can tweak, or if I am missing some drivers. Any ideas on where to start?
View 3 Replies
View Related
Aug 17, 2011
Ever since I switched from ubuntu 10.04 to 11.04 I am having problems with playing videos.
I keep getting low frame rates while playing avi and mkv video files. I have tried messing around with the vsync option in compiz and the Catalyst control center but all to no avail.
I have read there are more ATI users with this problem. Is there a way to fix this?
View 4 Replies
View Related
May 8, 2010
Since upgrading to Lucid, I am getting the following dialog warning on login: 'Could not apply the stored configuration for monitors X Server does not support size requested' Im using the current proprietary NVIDIA graphics driver with dual heads. My display is fine, but the warning every time I login is annoying. After googling around I found this thread: [URL]. I tried going to Monitor Preferences as suggested. My resolution as displayed in the default tool is set to 3840 x 1200, which I suspect is the issue forcing the dialog, but I cant change the resolution, refresh rate or rotation from the Monitor Preference dialog box. dino99's response (in the referenced post) about xorg.conf not being needed anymore seems relevant. How can I resolve this issue and get rid of this annoying warning? Is there a configuration that I can update with a supported resolution to placate lucid?
View 9 Replies
View Related
