Ubuntu Multimedia :: K9Copy Crashes Upon Load After Upgrading From 10.4 To 10.10
Jan 3, 2011
I had some problems upgrading from 10.4 to 10.10, and I had to select the "safe mode" equivalent option in the grub loader to boot, or else my system would hang at the screen with the dots before the login prompt. I restored the packages and now my system works. I am not sure if this is relevant to my problem.
K9Copy worked fine prior to upgrading to 10.10, now it crashes as soon as I load it. I have searched but found nothing relevant to my problem.
View 1 Replies
ADVERTISEMENT
Apr 9, 2011
If I use K9Copy to compress a 6.4 gb DVD to a 4.4gb ISO files, it heats up the CPU and the machine shuts off. When I do this with system monitor ON, I see 160% to 180% CPU usage. I guess this is due to dual core on my Gateway laptop.Then I installed DVD Shrink and tried the same by running DVD Shrink using Wine. This caused the same problem.I did not have this issue when I was using Windows Vista. Is there anything that I can do to avoid this problem?
View 7 Replies
View Related
Apr 7, 2011
I'm attempting to rip a DVD made by a friend, and I am using k9copy with minimal success. I am attempting to rip to .avi, but every time I start the backup, my DVD drive shuts off at 64%. I get this issue: Code: Executable: k9copy PID: 6563 Signal: Segmentation fault (11)I have had a few issues with the drive before, but nothing this consistent. I'm running k9copy 2.3.5 and 10.10 maverick.
View 1 Replies
View Related
Jan 19, 2011
Previous X was 1.4.2. After aptitude upgraded X Window to 1.7.7, startx crashed complaining: XKB could not find /usr/share/../rules/evdev file. There is no evdev file.
How do I modify xorg.conf to work with evdev? I spent few hours to figure out evdev. It seems it's new style of managing input devices in X Window. The information isn't friendly to migrate from old to this.
When I put Option "AutoAddDevices" "off" in ServerLayout section, it literally froze X Window. X started without mouse/keyboard control. I had to turn off power switch. Now, I can't use X at all unless I move back to 1.4.2.
View 1 Replies
View Related
Nov 7, 2010
I have made the jump to Ubuntu, I have installed 10.10 on a Dell Precision 360, I have sound on VLC player, internet radio, but when I want to preview in K9copy I see the Video but hear no sound.
This may also be the issue with dvdshrink under wine, which loops fo about second or 2
I dual boot between Windozs XP professional and Ubuntu
View 2 Replies
View Related
Feb 17, 2010
Using the Synaptec route, I can only install version 2.3.3, which is backlevel (latest is 2.3.5)
I have tried updating Synaptec, tried downloading directly from the website, but cannot figure out how to compile, etc.
how I get the latest version available in Synaptec, or another way to get the latest?
View 2 Replies
View Related
May 23, 2010
I am using k9copy to extract the five titles in a DVD ISO-image to separate avi-files. I selected the copy option for both audio and video, and made sure all the tracks were selected. The resulting avi's played without sound in Totem. VLC gave an error message that audio format " []" was not supported.
I then did the extract again, selecting aac for the audio processing. The result was the same.
Again, with mp2, the same result.
The DVD contains audio in "mp2 2ch 48KHz 20bps" format (information shown by k9copy).
When I play the video from the ISO, using VLC, sound is ok.
How can I get k9copy to extract the video with sound?
View 2 Replies
View Related
Dec 25, 2010
I'm trying to use K9copy in Ubuntu 10:10 to shrink some videos from a straight iso copy down to a 800MB avi file. The video seems to copy fine and the picture looks fine but when I try play it in VLC theres no sound.
Is there something I'm missing? And yes I played the ISO in VLC and had it play with sound fine.
View 3 Replies
View Related
Feb 17, 2011
I want to copy one track/chapter from a DVD to an AVI file, but the sound is not copied only the video. I
- selected track/chapter by clicking checkbox
- selected 'MPEG-4 encoding' for output
- used default settings (codecs were 'copy' for video and audio)
- clicked DVD copy action
Result:
1. Movie Player: no sound
2. VLC: Error message 'No suitable decoder module: VLC does not support the audio or video format How can I get sound and video?
P.S.
Using k9copy version 2.3.5. I tried all audio codecs available in the k9copy Audio tab. They failed in the same way as before. The chapter list contains 'audio 1 Unknown pcm 2ch 48kHz 16bps'. I don't know how to interpret that. Also installed and tried AcidRip and Dvd:rip. Sound worked fine for both. AcidRip did not show any audio settings. Dvd:rip showed:
Select track: 1: xx lpcm 48kHz 2ch => 1
Codec: MP3
Bitrate: 128 48kHz
Quality: 2
Filter: None, volume rescale only
Volume rescale: 0
Again, it does not mean much to me.
View 1 Replies
View Related
Jul 28, 2010
I have just installed Lucid Lynx but cannot get K9copy to work at all. It loads, but closes as soon as I try to open the dvd. Anyone else getting similar problems, or, more to the point, does anyone know how to fix it?
View 2 Replies
View Related
Oct 16, 2010
I have a problem with K9Copy's back up system it cannot seem to shrink a DVD9 down to 4.7gb to fit on a standard 4.7gb DVD Disk, how to correct this? As it renders K9copy totally pointless for me.
PS: This issue didn't exist on Ubuntu 10.04LTS
View 2 Replies
View Related
Jun 2, 2011
I finally got K9copy to work and I'm using it to extract DVDs to my hard drive. I extract a dual layer DVDs it becomes a 5GB DVD. In the settings, I have DVD size as 9GB because I assumed this would not cause any compression. When I use k9copy assistant to change the shrink factor before ripping, I can only change the shrink factor of some titles to 1.67 from 2.50. I want the shrink factor to be 1 since this seems to ensure that the output of the file is the same size as the title on the dvd. I want the copied DVD to be the same size as the original. I have no problem with hard drive space since I have 6 terrabytes of free space.
View 6 Replies
View Related
Nov 28, 2009
Running Opensuse KDE 11.2 64bit. Trying to backup DVD, but no sound after playing ripped copy. After looking at the settings in K9copy and DVD95, the sound section says "Unknown AC3" where it normally says "English AC3". I've tried mencoder and ffmpeg.
View 7 Replies
View Related
Oct 22, 2010
I have an HP 311c netbook which was dual booted XP home and Ubuntu 10.04. Everything worked fine apart from the internal wireless modem (the only reason I needed XP as it worked under Windows) I then upgraded to 10.10 and that started my network problems.
I upgraded Ubuntu using terminal and update-manager, which went ok. The network was identified, but more often than not it now seems to crash the network (and seems to happen sporadically too) - seems to be at some stage whenever the netbook is on now. This then prevents all other PCs/Ipods from accessing the internet. The only way to recover is to reboot my wireless network and the internet modem (and shutdown the netbook).
I got so infuriated with it that I clean installed from a USB key I created, Wireless network runs fine with all other PCs and IP equipment
Network: Linksys 11 B
Internet modem Virgin Media
One strange thing that happened when I upgraded, but seems to have now disappeared, is that I managed to get it to identify and actually use the internal modem, although that 'Mobile Internet' option under Network Manager has now disappeared from the list, so I cannot activate it..
View 5 Replies
View Related
Nov 5, 2010
I am having a great time very quickly migrating from Windows through Ubuntu.
One area that I am still having trouble in is transcoding VOB into DivX, XviD, AVI, etc. I have been succesful one time using k9copy and it made a great looking avi. Since that time I get a failure on the 2nd pass. It seems as if the problem is related to the line in the error log "requested bit rate too low". So I changed from filesize to bitrate selection in the wizard and set it at max (99999). This got it to start the 2nd pass but still ended up crashing about 3/4 of the way through with an unexpected error message. Undaunted i tried again with the same setup and options. This time I once again got the bitrate too low error on the 2nd pass.
I have tried other GUI apps like avidemux (sound out of sync with that one), WinFF (not merging the vob's together), and others without satisfactory results. It would be great if I could get k9copy to work as it did the first try as it did exactly what I am looking for.
I have mencoder and all the depedencies installed (I believe). I am running a quad core amd64 bit processor and ubuntu 10.04.
It is just puzzling to me that k9copy worked flawlessly the first time and now nothing but trouble.
These are VOB's that have been put together by IFOedit from files dmuxed by DVDdecryter (under wine) stripped of copy guard. I take the ac3 soundtrack and convert it into WAV so that i can add a commentary (rifftrax) in audacity, then convert that back into ac3 and combine it all together again. I have been doing this for some time in Windows, and can now do everything in Ubuntu except for the avi transcode (really bothersome to reboot into windows just to run DivX Pro converter).
View 1 Replies
View Related
Feb 17, 2011
I'm trying to copy DVD's to 700mb so that they will play in DIVX on my DVD player. I'm using K9Copy 2.3.5.I've set the options to:And also tried changing the codec to MPEG-4 (DIVX 4/5)But when I select the title I wish to copy, no MPEG-4 tabs appear at the bottom of K9Copy to adjust the settings for each chapter.This means that the avi file created is 3.2GB.
View 2 Replies
View Related
Jan 14, 2011
So, after the last Update, my PC crashes when trying to load Xserver. I can boot in the "recovery mode" from grub and then choose "resume" from the menu. This takes me to tty1. From there if I try to startx my computer crashes again and I'm left with a black screen with no hints as to what went wrong. I even tried
Code:
But the file stays empty because apparently my computer hangs before it has the chance to write anything to it.
Finally, I went to the /etc/X11 directory and searched for any xorg.conf backup files. I only found a xorg.conf.fglrx-0 which I renamed to xorg.conf and tried to load xserver again with the exact same result.
Ctrl+Alt+Backspace doesn't work either.
View 2 Replies
View Related
Apr 30, 2011
I upgraded my laptop from 10.10 to 11.04 yesterday. On the reboot part of the installation and on all subsequent boots, the loader gets as far as the initial Ubuntu splash screen before switching to verbose mode and dying in interesting ways.
If I boot using wireless, the display flashes six times, then sometimes hangs around before reporting: iwlagn 0000:08:00.0: Aggregation not enabled for tid 0 because load = 4 (this number can be anything from 0 to 10)
If I boot using a network connection, I get the same splash screen and six flashes before the system hands, usually at the message: Stopping userspace bootslash [OK]
I am not keen on reinstalling from CD except as a last resort as I have a number of files that I do not want wiped.
View 4 Replies
View Related
Jul 17, 2010
Last night I rebooted after installing all updates. I can now no longer start evolution at all. It fails with a signal 11, not providing any more This is obviously a particularly vexing problem for me, as I can't get to my email at all. I am using the exchange-connector, if that is relevant. I can access my Exchange server via web interface.If I start from the command line, here are the generated error messages:
Code:
(evolution:18324): e-data-server-DEBUG: Loading categories from "/home/nalbad80/.evolution/categories.xml"
(evolution:18324): e-data-server-DEBUG: Loaded 29 categories
[code]....
View 6 Replies
View Related
Aug 19, 2011
I am running 11_4, KDE4.7 I loaded CinePaint cinepaint-0.25-3.10.x86_64.rpm from the multimedia:color_management/openSUSE_11.4 repo. It opens, but crashes if I try to load a jpg for edit or try to create a new picture.
View 8 Replies
View Related
Oct 22, 2010
After upgrading my server from 10.04 to 10.10 I keep getting the following php error, "PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php5/20090626+lfs/syck.so' - /usr/lib/php5/20090626+lfs/syck.so: cannot open shared object file: No such file or directory in Unknown on line 0"
View 1 Replies
View Related
Feb 20, 2010
I cant download k9copy :S I cant find it anywhere on the getdeb and the link to the getdeb k9copy page on the k9copy website just takes me to the welcome page.
View 5 Replies
View Related
Nov 11, 2010
I've tried pretty much every DVD ripping program available, DVD::Rip, DVD95converter, DVD Movie Backup. My favorite backup program is k9copy (easiest to use and has all the features I need). But no matter what I try, certain Disney movies just won't backup. Specifically, at the moment, many of the Miyazaki/Studio Ghibli films.
After selecting the disc, the program either crashes out immediately, or it starts filling up the memory, slowing everything down, until finally it crashes. I thought updating to the newest version would maybe help (not even available through standard "Update Manager", had to find it myself), but the same problems occur. I'm currently trying with ddrescue, hoping that works. But I don't really like the idea of using a series of programs to get the output I want.
Is there a program that can backup, compress, and convert a Disney movie into a playable/burnable ISO file? Because these films are Japanese, I would definitely prefer something that can output normal switchable subtitles and audio (as opposed to an MPG or AVI that just has the one audio track).
View 7 Replies
View Related
Mar 14, 2010
About 2 weeks ago I upgraded my Ubuntu OS from 8.04 to 8.10 and then to 9.04 with kernel 2.6.28 - 10 - Generic.Today I discovered K9Copy no longer works. When I start K9Copy it comes up ok but if I click on anything in the main window (file, copy, etc.) I get a message that says:A fatal error occured.The application K9Copy crashed and caused the signal 11 (SIGSEGV)
View 2 Replies
View Related
Jun 22, 2011
Last week I did the upgrade from Ubuntu 10.10 to 11.04. Did it on-line, and it went really well; actually the best upgrade since I started with Dapper I promptly got rid of the Unity desktop and went back to Gnome. Everything worked normally, except K9copy does not work any more. Whether I invoke it from the terminal or the Apps menu, it open the first window and crashes when trying to read the DVD; here is the terminal output:
Code:
jf@mainu:~$ k9copy
*** libdvdread: CHECK_VALUE failed in /build/buildd/k9copy-2.3.6/src/dvdread/ifo_read.c:1088 ***
*** for data[i] + sizeof(ptt_info_t) <= vts_ptt_srpt->last_byte + 1 + 4 ***
*** libdvdread: CHECK_VALUE failed in /build/buildd/k9copy-2.3.6/src/dvdread/ifo_read.c:1088 ***
*** for data[i] + sizeof(ptt_info_t) <= vts_ptt_srpt->last_byte + 1 + 4 ***
[Code]...
View 3 Replies
View Related
Jan 19, 2010
I am trying to install the latest version of K9copy, but the only available version is in the .tar.gz file package. I placed the folder on my desktop and extracted the files. Now I have the .tar.gz file and the extracted files on the desktop. I need to install the files, but I don't know which command to use or what to do to get any commands to work.
(Keep in mind that the extracted folder is named 'k9copy-2.3.4-Source.tar.gz')
./configure
make
make install
This seems to be the most common answer to install the files, but it NEVER works, nor do I understand where the package files come into play when I type this command into the terminal.
View 9 Replies
View Related
May 13, 2011
I've just installed Squeeze 6.01a from the xfce iso image on an old PIII which has been running Lenny with xfce without any problems. It's a fresh install after a reformat.
Sounds and multimedia apps like gxine and mplayer all worked fine on Lenny and other older versions. Now they don't - not gxine, not mplayer not even VLC. Run from the menu they all abort - and if run in an xterm they all crash with the following message -
Assertion 'pthread_mutex_unlock(&m->mutex) == 0' failed at pulsecore/mutex-posix.c:108, function pa_mutex_unlock(). Aborting.
View 3 Replies
View Related
Feb 7, 2010
Trying to make a dvd9 fit on a dvd5. Mainly would like to strip all the menus so it plays nicely. The DVD in question is copy protected but plays just fine on my system with Movie Player or VLC.But so far when dvd95 or k9copy tries to analyze the structure of the dvd, they just turn grey and hang. Then my computer locks shortly after. If I have system monitor open I can see what happens -- it's not a hard lock. Basically the memory just starts filling up, and then when it starts filling the swap space that slows everything down and makes it unresponsive. If I'm really patient I can get to a console and kill the process, which returns my system to normal.Handbrake works just fine, but I don't actually want to transcode the video, just strip the menus.
View 7 Replies
View Related
Sep 18, 2010
This is not a huge deal but I have missing hard drive space, I re-sized an iso with k9copy I then used mv to move it to the other iso like so:
Code: mv this.iso that.iso which moved and renamed it, however I did not get any drive space back by effectively "deleting" the first iso. So my question is do I have an unnamed iso file floating around that cannot be deleted?
View 4 Replies
View Related
Nov 24, 2010
I have triple monitors working on my 10.10 ubuntu system and they work for most things. Except k9copy and virtual box will cause x to restart. glxgears works fine.
xorg.conf
Code:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" RightOf "Screen1"
Screen 1 "Screen1" 0 0
Screen 2 "Screen2" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection .....
View 5 Replies
View Related
