Server :: ERROR The Requested URL Could Not Be Retrieved

Mar 5, 2011

I installed squid on my centos and I tried to follow some guides but it still gives the same error

Quote:
ERROR The requested URL could not be retrieved

While trying to retrieve the [URL]...The following error was encountered: Access Denied. Access control configuration prevents your request from being allowed at this time. Please contact your service provider if you feel this is incorrect.

[Code]...

ZON-BFC0 is the name presented in my wireless connection, plus the actual ip I'm using there is the ipv4 I found with a quick "ipconfig" search on DOS.

View 7 Replies


ADVERTISEMENT

Server :: Squid Proxy Error - The Requested URL Could Not Be Retrieved

Mar 7, 2010

today there was problem with isp but we fix it now other machine run internet fine but when we run through squid proxy machine it give this message to all users. what fields column values config i should check it. i also reset the cache make empty folder. restart machine also service clear the logs . it is on centos 5.4

see below message

ERROR: The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: Read Error

The system returned:

(104) Connection reset by peerAn error condition occurred while reading data from the network. Please retry your request. Your cache administrator is root.

View 1 Replies View Related

Fedora Networking :: Ftp Connecting - Error "The Requested Name Is Valid, But No Data Of The Requested Type Was Found"

Sep 30, 2009

i used my windows box to connect to ftp(fed box) and i keep getting an error saying "The requested name is valid, but no data of the requested type was found." does anyone know why i cant connect?

View 1 Replies View Related

Server :: Unexplainable 404 Error In Apache2 / Requested Url /~myusername/site/ Not Found?

May 26, 2009

I am in the process of writing a web-application using apache,mod-python and cheetah. I installed apache2, mod-python and cheetah and also enabled the userdir module in apache2 so that i can host the webpages inside my public_html folder.

The public_html folder has a folder named 'site' which gets displayed when I type "url" in the browser. There are subfolders inside this 'site' folder and the site folder also has an index.html page inside it.

But when I click on the site folder in the browser, I get a 'Requested url /~myusername/site/ not found'. There are files inside the folder with 777 permissions and still I get this error.

I use Ubuntu Jaunty with the following configuration - 'Apache/2.2.11 (Ubuntu) PHP/5.2.6-3ubuntu4.1 with Suhosin-Patch mod_python/3.3.1 Python/2.6.2 Server at localhost Port 80'.

These are the lines I have added to the /etc/apache2/sites-available/default file

Code:

<Directory "/home/myusername/public_html/site/">
SetHandler mod_python
PythonHandler mod_python.publisher
PythonDebug On
PythonAutoReload On

View 1 Replies View Related

Server :: SOA For Nameserver Can't Be Retrieved, Possible Port Or BIND Misconfiguration?

Aug 24, 2010

My configuration: CentOS in a VPS environment, I have 2 static IPs at my disposal.I'm having trouble setting up my nameservers. I've registered the nameservers with my registrar and supplied the GLUE records, however my registrar has not yet applied this information into the DNS zone, because my nameservers fail to generate a response on port 53.DNS check says the following about my nameserver address:Checking SOA records for domain. Domain server is not answering to UDP requests on port 53. Possible problems: A firewall is blocking port 53, server is down, server is not running software for handling dns requests.So the only two possibilities I see is that my port 53 is somehow blocked or not properly set to accept and send the correct traffic or that I've misconfigured BIND.

View 2 Replies View Related

Ubuntu Installation :: Display Error Notification 'Could Not Apply The Stored Configuration For Monitors X Server Does Not Support Size Requested' On Bootup

May 8, 2010

Since upgrading to Lucid, I am getting the following dialog warning on login: 'Could not apply the stored configuration for monitors X Server does not support size requested' Im using the current proprietary NVIDIA graphics driver with dual heads. My display is fine, but the warning every time I login is annoying. After googling around I found this thread: [URL]. I tried going to Monitor Preferences as suggested. My resolution as displayed in the default tool is set to 3840 x 1200, which I suspect is the issue forcing the dialog, but I cant change the resolution, refresh rate or rotation from the Monitor Preference dialog box. dino99's response (in the referenced post) about xorg.conf not being needed anymore seems relevant. How can I resolve this issue and get rid of this annoying warning? Is there a configuration that I can update with a supported resolution to placate lucid?

View 9 Replies View Related

Ubuntu Installation :: Error: "a File Cannot Be Retrieved"

Apr 21, 2011

I am trying to install ubuntu desktop edition, but when it is nearing the end of the downloading phase, it says "Error: a file cannot be retrieved" (something along those lines) and all my time goes to waste. This has happened every time I try and download it. I am using windows 7

[Code]....

View 6 Replies View Related

Fedora :: Error 12: Invalid Device Requested - Win 7 + F11

Dec 4, 2009

I have installed Windows 7 followed by Fedora 11. Everytime I install Fedora 11 with Win 7, the first to boot, I get BOOTMGR missing. Later I used "df -h" command to see the disk file usage fdisk -l" to see the info regarding Disk Partitions. Went into the /boot/grub/menu.lst and modified the order. I set the partition where I find the bootmgr.exe.mui, there was another file named "memtest.exe.mui in the same file.

I navigated to the above said through Fedora 11. Located inside the Win 7 installed directory /boot/en-US/

When I changed the menu.lst file, I get a new error Error 12: Invalid device requested when I tried to boot Win 7. Does that mean that Fedora 11 GRUB is not getting the bootmgr.exe.mui since its 2 levels inside the boot directory ??

View 2 Replies View Related

Fedora :: Error: Cannot Assign Requested Address

Jun 7, 2010

Every time I upgrade my system I run a post install script. This script made some harm to the network start that prevents sshd from starting, but I was unable to detect the problem. In my boot.log I found this:

[...]
Starting NetworkManager daemon: [ OK ]
Starting Avahi daemon... Jun 2 14:58:48 Antares kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready

[code]...

So there is a "bind to port 22 failed" probably caused by "eth0: link is not ready", but after the sshd init script fails the eth0 is ready...

View 9 Replies View Related

Ubuntu :: Error 12: Invalid Device Requested

May 25, 2011

I have message: error 12: invalid device requested.It happen when i choose ubuntu partition. before this error message the netbook run perfectly with dual boot. ubuntu is 1st option winXP is 2nd option from the list(maybe grub ?) Since i want winxp as the 1st option instead ubuntu,i change the file /boot/grub/menu.lst. what exactly i change is just cut and copy the winxp part to above ubuntu part.

if i press 'e' in ubuntu show:

root (hd0,6)
kernel /boot/bla..bla.bla..
initrd /boot/bla..bla.bla..

[code]...

View 1 Replies View Related

CentOS 5 :: Error: Requested Datatype Primary Not Available

Aug 2, 2009

I get this error:

Error: requested datatype primary not available

# rpm -q centos-release
centos-release-5-3.el5.centos.1

None of the following actions fixed the error.

# yum clean all
# rm -f /var/lib/rpm/__db*
# rpm --rebuilddb

[Code]....

View 5 Replies View Related

CentOS 5 :: Squid 3.0 Error:(99) Cannot Assign Requested Address?

Aug 13, 2009

I have got squid 3.0 stable 13 installed on a new centos5 box .I have used it on other centos5 ones and it has worked really well.It didnt give any error messages during installation on this one until i used the proxies in the browser.I have used it on other centos5 ones and it has worked really well.But with this box I am getting this error in browser-The following error was encountered while trying to retrieve the URL:Yahoo!Socket FailureThe system returned: (99) Cannot assign requested addressSquid is unable to create a TCP socket, presumably due to excessive load. Please retry your request.I have tried many options for http_port but to no avail.I have never seen this error before with and am totally clueless

Excerpts from cache.log
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2009/08/13 05:57:17| Squid Cache (Version 3.0.STABLE10): Exiting normally.

[code]....

View 2 Replies View Related

Ubuntu :: Error - Docky Could Not Move The File To The Requested Directory

Apr 14, 2010

I'm running Ubuntu 9.10 and Gnome-Do 0.8.3.1. I have two issues I hope someone can help with.First I've managed to add two folders to the doc, however when I hover over the icon the name is displayed as "..." This might be because the path of the folder is "/home/eric/Desktop/500" which is a link to "/mnt/500" I cannot add the folder without the error listed below. When trying to add folders, and some applications I receive the error:

"Docky Error - Docky could not move the file to the requested Directory. check file name permissions and try again."

View 1 Replies View Related

General :: Error: Security Context Requested, Bu No Selinux Support! Aborting

Apr 19, 2010

I try to install IPsec-Tools on Slackware 13, but I get an configure error: configure: error: Security Context requested, bu no selinux support! Aborting. I'm linux newbie and I'm following a slackware-basics tutorial, I did as in the tutorial, but the configure stops and aborts:

Code:
# CFLAGS="-O2 -march=i486 -mcpu=i686"
./configure --prefix=/usr
--sysconfdir=/etc
--localstatedir=/var

[Code]...
What can I do? How can I enable/install selinux support? I guess it's related with AH and ESP protocols, which in my kernel are defined as modules (m). If so, how can I enable them?

View 5 Replies View Related

Server :: Could Not Open Requested SVN Filesystem?

Nov 17, 2009

Ah, the most dreaded SVN error of them all. It's not even showing up in my Apache logs, either, just on trying to commit.

When I try to add a file to the repository via the following command, I get the error:

Code:
add -N F:eetlemed-1.7workspace
ootClientsrccomeetlemedwebappdataContactInfo.as
A F:/beetlemed-1.7/workspace/rootClient/src/com/beetlemed/webapp/data/ContactInfo.as
commit -m "no more broken commits?" (24 paths specified)
code....

It seems that this error only shows up when I try to add a file to the repo, not when I try to update. I've already run chmod +rwx -R repository, so it should have all of the permissions it could possibly need. The only thing I don't know about is adding it to a group. I don't think my server has an apache group, so I wouldn't know where to start and what to do with that.

This problem happens from time to time, but I can't seem to shake it this time. I'm running SVN over HTTPS on Apache 2.x.

View 1 Replies View Related

Fedora Installation :: Error: Could Not Allocate Requested Partitions - Not Enough Free Space On Disks

Jul 11, 2010

I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):

Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat

View 5 Replies View Related

OpenSUSE :: Error(-30987) From Dbcursor->c_get: DB_PAGE_NOTFOUND: Requested Page Not Found

Jun 16, 2010

Since a few days, zypper start giving me this errors when i try to update/install packages

Here is the output:

[Code]...

error(-30987) from dbcursor->c_get: DB_PAGE_NOTFOUND: Requested page not found

View 2 Replies View Related

Software :: The Requested URL /phpMyAdmin Was Not Found On This Server

Mar 19, 2010

I have install apache,php,mysql and then I have installed the phpmyadmin by issueing the command in terminal sudo apt-get install phpmyadmin

After this ,in my web brower i type... localhost/phpmyadmin ,it give the error message "Not Found

The requested URL /phpMyAdmin was not found on this server. Apache/2.2.12 (Ubuntu) Server at localhost Port 80"

View 8 Replies View Related

Fedora Installation :: 3 Core On Old Hard Drive - Error: Couldn't Allocate Requested Partitions

May 6, 2009

I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.

View 6 Replies View Related

CentOS 5 Server :: SVN - Could Not Open The Requested SVN Filesystem [500, #160043]?

Nov 17, 2009

I'm trying to config Apache and Subversion to work together, I did:

1. yum install mod_dav_svn subversion then I had Subversion and httpd installed!

2. create: /usr/local/subversion/repos

create: /usr/local/subversion/repos/test (by svnadmin create)
create: /usr/local/subversion/access/svnauth.conf (by htpasswd)
added to file : /etc/httpd/conf.d/subversion.conf:
<Location /repos>
DAV svn
SVNListParentPath on

[Code]...

View 1 Replies View Related

Ubuntu :: Impress - None Of Pictures Embedded Retrieved

May 26, 2010

I am preparing a poster using draw and impress. Everything go well till I save the file and quit the impress. When I open the previous prepared poster in impress, none of pictures embedded retrieved. I have also prepared a diagram using draw. There is no problem importing it into impress. The problem comes when I close the poster and re-open it in impress. It goes crazy. 1.png is before closing the impress and 2.png is after re-opening it.

View 3 Replies View Related

OpenSUSE Hardware :: Mouse Pointer Is Completely Gone & Cannot Be Retrieved

Nov 14, 2009

When computer idles for 20 minutes & I return, the cursor is completely gone & cannot be retrieved, though the mouse looks like it is working, just no cursor. Also my monitor keeps changing parameters, I tried to set Sax2 but it won't save changes? What do I do? I didn't notice the cursor thing until I set up the screensaver to go off at 6 minutes.

View 9 Replies View Related

Ubuntu Multimedia :: K9copy "requested Bit Rate Too Low" Error On 2nd Pass

Nov 5, 2010

I am having a great time very quickly migrating from Windows through Ubuntu.

One area that I am still having trouble in is transcoding VOB into DivX, XviD, AVI, etc. I have been succesful one time using k9copy and it made a great looking avi. Since that time I get a failure on the 2nd pass. It seems as if the problem is related to the line in the error log "requested bit rate too low". So I changed from filesize to bitrate selection in the wizard and set it at max (99999). This got it to start the 2nd pass but still ended up crashing about 3/4 of the way through with an unexpected error message. Undaunted i tried again with the same setup and options. This time I once again got the bitrate too low error on the 2nd pass.

I have tried other GUI apps like avidemux (sound out of sync with that one), WinFF (not merging the vob's together), and others without satisfactory results. It would be great if I could get k9copy to work as it did the first try as it did exactly what I am looking for.

I have mencoder and all the depedencies installed (I believe). I am running a quad core amd64 bit processor and ubuntu 10.04.

It is just puzzling to me that k9copy worked flawlessly the first time and now nothing but trouble.

These are VOB's that have been put together by IFOedit from files dmuxed by DVDdecryter (under wine) stripped of copy guard. I take the ac3 soundtrack and convert it into WAV so that i can add a commentary (rifftrax) in audacity, then convert that back into ac3 and combine it all together again. I have been doing this for some time in Windows, and can now do everything in Ubuntu except for the avi transcode (really bothersome to reboot into windows just to run DivX Pro converter).

View 1 Replies View Related

Red Hat / Fedora :: PNG Backend Error While Installing Cairo-1.6.0 - Requested PNG Backend Could Not Be Enabled

Nov 29, 2010

I want to install GTK+. I see there are also numerous dependencies, which i've been slowly tackling, and the Cairo package has been particularly difficult. It claims the following upon ./configure --prefix=/usr configure: WARNING: Could not find libpng in the pkg-config search path checking whether cairo's PNG backend could be enabled... no configure: error: requested PNG backend could not be enabled I've done some searching and found that libpng.pc is in my /usr/lib/pkgconfig/ directory and that the following commands don't do the trick:

PKG_CONFIG_PATH=/usr/lib/pkgconfig
export PKG_CONFIG_PATH

View 1 Replies View Related

Networking :: Error: "bind: Cannot Assign Requested Address"

Jun 18, 2010

I have a small cluster (OSCAR, Fedora 8) and I was able to run some application software on it. Then lightning struck very close to the building. Fortunately I had unplugged all the power cables (because the cluster has not yet been moved to where the power lines are protected), but it seems that the institution didn't have any protection on their LAN cables, and so the whole building's public network cards are damaged. A costly lesson.

Anyway, when I tried to run the application software in parallel across the cluster (using the private network which is unscathed) I get the error message given in the subject line. I contacted the application software's help department as I thought I had perhaps forgotten to set something, but according to them it is a normal network problem.

Quote:

Check the /etc/hosts file and make sure that the nodes all have a single definition and you don't have lines like

127.0.0.1 localhost normnode3

and that normnode3 has the same address both on the master and on the node. try ping normnode3 from the master and see what address comes back 64 bytes from 164.190.57.105: icmp_seq=1 ttl=64 time=0.306 ms or is it 127.0.0.1. Then do the reverse. Also double check that you can ssh between nodes without password but I would expect a different error then. The command "hostname" returns gnlserv01, which is the public NIC.

After the lightning I had trouble getting the nodes to communicate "automatically" with each other, but it can be cured by starting the xinetd service and disabling the firewall on the master node (it's not too dangerous since I don't have a public interface at present and since I'm sitting behind the institution's firewall as well.) Just by the way, I would think that ther should be a file somewhere in which I could specify those two commands to take place when the master node is switched on. Could you perhaps enlighten me as to where and how I could specify it?

I was wondering whether I would need to explicitly start a bind-type service or something like that? (Since I had to explicitly start xinetd) I'm rather clueless really. I googled around and found that there is a named service, so I tried to start it, but I don't think it's installed on the computer. Therefore, since I have managed to run the application software in parallel previously, the named service is probably not the problem. Here is a copy of how my /etc/hosts file looks like:

Code:

# Do not remove the following line, or various programs
# that require network functionality will fail.
# These entries are managed by SIS, please don't modify them.
127.0.0.1 localhost.localdomain localhost

[code]........

View 3 Replies View Related

General :: Dual Booting WinXP & 9.04 - Error 12: "Invalid Device Requested"

Sep 28, 2009

I had Windows 7 and Windows XP. It was 3 partitions in one HD (two OS' and one for files) and another separate HD (which doesn't have any system, it's just media files and stuff). When booted, I used to get the Windows 7 screen, that allowed me to either boot 7 or XP. I thought I had tested 7 enough and wanted to try Ubuntu, so I (from the Ubuntu CD which I downloaded and burned) deleted the 7 partition and made a 2GB swap partition, and, what was left, an Ubuntu partition on which I installed it.

Now when I boot I get an Ubuntu boot screen that shows several Ubuntu options and a WinXP option. Ubuntu works fine, but if I choose WinXP, I get "Error 12: Invalid device requested". I didn't change anything more than what I said. The details for the WinXP boot option seem to be:

rootnoverify (hd0,4)
savedefault
makeactive
chainloader++

What can I do to be able to boot WinXP again? (and also Ubuntu, whenever I want to). The only thing I can think of is using Windows XP CD's restore thing to restore the boot menu, but that would stop me from using Ubuntu...

View 3 Replies View Related

Programming :: Compiler Error: "Conversion From 'bool' To Non-scalar Type 'std::string' Requested"

Mar 5, 2010

As a result, I want to know what this error means, and how to correct it.Here is my code:

Code:

#include <iostream>
#include <cmath>
#include <cstring>
using namespace std;

[code]....

It is once I use the 'try_crack' function inside of main that I get this error.

View 6 Replies View Related

Fedora Installation :: 16 Gb Enough For F11 - Error "Couldn't Allocate Requested Partitions: Not Enough Free Space On Disks"

Oct 24, 2009

Created abt 16.4 gb free space using Disk Management in vista. I read the sticky on installing from the live cd and did accordingly. Whatever Partition i create first (boot or /), it gets done. However, when tryin to create the 2nd partition, i get "Could not allocate requested partitions:Not enough free space on disks." Cant proceed any further.

View 5 Replies View Related

Ubuntu Networking :: Hosting Website: "Requested URL Was Not Found On This Server"?

Nov 21, 2010

I'm doing an upgrade of a web based application for a charity organization. To test the changes that we're making to the code, I wanted to set up a server on my home PC to host a copy of the site. I've configured apache, php and mysql like the server that's currently hosting the real app, but I have a problem:The first page is a login screen. This, of course, has a login form like so:

Code:
<form id="login" action="/menu/login" method="post">
<fieldset class="a_cuatrocincuenta">

[code]....

View 8 Replies View Related

Fedora :: Samba / Server Requested Plaintext Password But 'client Plaintext Auth' Is Disabled?

Apr 27, 2010

I am having a hard time with samba. Please point me in the right direction! I cant seem to get the web configuration tool working either.

smbclient -L teraquad
Server requested plaintext password but 'client plaintext auth' is disabled
session setup failed: SUCCESS - 0
smbclient -L teraquad -N
Domain=[OFFICE] OS=[Unix] Server=[Samba 3.4.7-58.fc12]
code....

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved