Ubuntu Multimedia :: Get Vlc To Startup With The Equalizer Enabled With A Preset?
Oct 19, 2010how to get vlc to startup with the equalizer enabled with a preset. It works fine but always starts with the eq turned off.
View 3 Replies
ADVERTISEMENT
Ubuntu Multimedia :: Add A Mp4 Audio Preset To Winff
May 13, 2011How do I add a preset to the program winff a popular frontend for ffmpeg so that I can have MPEG4 audio support.
P.S. if this is in the wrong area of the forum I will move it if someone will tell me where it needs to go.
Ubuntu Multimedia :: Ffmpeg: File For Preset 'hq' Not Found
May 17, 2011Why do i get the following message when trying to convert in ffmpeg?
File for preset 'hq' not found
Ubuntu Multimedia :: How To Make Vlc Remember My Preset Audio Settings
Apr 13, 2011how can I make vlc media player remember my preset audio settings. I'd want it to start up with ska preset instead of flat nothing.
View 2 Replies View RelatedUbuntu Multimedia :: Exaile V0.3.1.b Equalizer Not Working
Feb 12, 2010I noticed that Exaile got a recent update, among the 'new' features, I realized the equalizer plugin is back, problem is, it has no effect whatsoever on the sound.
I have kind of a special case, but still VLC equalizer works like a champ. My system is Ubuntu amd64 running alsa after pulseaudio was uninstalled. The reason I uninstalled PA is that my sound card didn't work at all, and I found out it was not supported by PA, but it is supported by ALsa (since Feisty, go figure!), it's an M-Audio 2496.
Can anyone confirm it's a PA thing or not? Do I have to have PA installed to use it?
Ubuntu Multimedia :: Which Are A Music Player That Uses The Equalizer
Sep 6, 2010I use several players, but all of it was no equalizer , while i was using Aimp with wine but there are some problems, when i stop the songs in the play, and run it back , i hear no sound on it , are we life in digital world ? music player without equalizer its like nightmare for me , like going back into the past , it was like seeing my father met my mother at the time of their first date
View 9 Replies View RelatedUbuntu Multimedia :: What Each Slider Adjusts On The Equalizer
Jan 10, 2011what each slider adjusts on the equalizer, say for example in xmms or qmmp? I want to tweak my settings to adjust the sound quality for my speakers. None of the presets come close and I don't have the "ear" for sound to just wing it by randomly sliding the things up and down. Sound quality is passable by default when I plug my mp3 player into them.
View 1 Replies View RelatedUbuntu Multimedia :: No Audio After Equalizer Installation
Apr 10, 2011i got mostly no audio.the sound test within system/ preference/sound works but videos, movie player, sidplay & rhythm box won't play audio.
View 1 Replies View RelatedUbuntu Multimedia :: Banshee 1.6.0: Equalizer Sliders Not Working?
Apr 2, 2010I installed Banshee 1.6.0. The equalizer presets change the position of the sliders, but I am unable to grab with the mouse any of the sliders individually and set them manually.
View 1 Replies View RelatedUbuntu Multimedia :: Enabling Pulseaudio Equalizer Garbles Sound
Jan 26, 2010I installed the pulseaudio equalizer today on my Karmic desktop using the instructions at URL...When I enable the equalizer via the GUI checkbox, my sound instantly becomes garbled. When I disable it the problem disappears, but then I can't use the equalizer, which was the point of the exercise. I found some suggestions about editing /etc/pulse/default.pa, but the parameters concerning module-hal-* don't appear in my default.pa. I also have read through a couple of Audio Troubleshooting guides without finding this particular symptom.
View 3 Replies View RelatedDebian Multimedia :: Equalizer Does Not Work In Totem And MPlayer With XV
Feb 24, 2011I use nv18 with nouveau. Why equlizer does not work?
View 5 Replies View RelatedOpenSUSE Multimedia :: Amarok 2.3 Broken Equalizer (Distortions)?
Jun 8, 2010As you may, not that long time ago, Amarok 2* got an equalizer. Amarok 2.3 equalizer behaves differently than equalizers in all other players I used (including Amarok 1.4). I just cannot make Amarok 2 sound right. I set equalizer to Full Bass + Treble preset. It is somewhat better than "Zero" preset, but it sounds too blunt (flat) nonetheless, while in Amarok 1.4 (and in Clementine) this preset sound just right for me.
Details (Amarok 2.3.0):The most obvious difference what I see is preamp (pre-amp), which is set to 0 dB in Amarok 1.4 preset and to -4.9 dB in Amarok 2. When I try to move it up to 0 dB, while Full Bass + Treble preset is active, I get unbearable high pitch distortions already with pre-amp set to -2 dB. I tried playing creating my own preset, but I cannot get the same sound as in Amarok 1.4.
In other words:is there any way to make Full Bass + Treble preset Amarok 2.3.0 sound like Amarok 1.4 preset?I am not an audio expert of any kind, but Amarok 2.3.0 just sounds different (in a bad way) for me. Maybe I am missing something?
Networking :: Detect If Eth0 Has Been Enabled Properly On Startup?
Mar 16, 2011building a box with no other interface than tcp/ip. now in case something goes wrong when changing the /etc/network/interfaces via ftp and when rebooting the system cannot bring the interface up I would like to be able to detect it and replace the interfaces file with a default one stored on the system.
View 1 Replies View RelatedOpenSUSE Multimedia :: Alsa Based Software Multi-band Graphic Audio Frequency Equalizer That Works With 11.x?
May 15, 2010Does anyone know of an alsa based software multi-band (10 or more) graphic audio frequency equalizer that works with Suse 11.x? To be clear, I don't mean an equalizer within an audio or video player. One that can be used with any sound application, that works between the output of the player and the output plugs on a motherboard or sound card.
View 9 Replies View RelatedGeneral :: Ntfs Parition Not Mounting At Startup / If Enabled Selinux In Rhel 5?
Feb 18, 2010i have dual OS in my hard disk. win xp and rhel5. i used use ntfs partition too while working in linux. There is no problem until i enable selinux. When i enabled that, its giving some error at startup and left the partition unmounted. But manually i can mount after logged in. But i need it at the startup itself. How to solve this.i am installed dkms* dkms-fuse* fuse* and fuse-ntfs-3g* rpms to use the ntfs partitions.
View 4 Replies View RelatedUbuntu :: How To Change 'icon View Defaults' Preset Percentages
Aug 30, 2010I want to change the default size of the desktop icons, but 100% is too big, and 66% is too small. Without scaling every icon, is there a way that I can either change the preset percentages in "icon view defaults" or change the default icon size some other way?
View 2 Replies View RelatedUbuntu :: No Login Sound Checked At Startup Applications And Found GNOME Login Sound Is Enabled?
Aug 7, 2010I hear no login sound when I login to my ubuntu. I checked at startup applications and found GNOME login sound is enabled. The command used there is
Code:
/usr/bin/canberra-gtk-play --id="desktop-login" --description="GNOME Login"
.
Its not only this, but there is no other sounds enabled - for mouse clicks etc
Ubuntu Multimedia :: Desktop Effects Cannot Be Enabled?
Jul 6, 2010I have an HP Proliant DL380 G6 server (relatively new), and I can't enable desktop effects. I'd think even a recent integrated GPU would be able to do this right? Why can't I do it?
View 4 Replies View RelatedUbuntu Multimedia :: Why The Capture Channels Are Enabled
Aug 15, 2010I am trying to configure my Kubuntu desktop since some time to have Mumble working perfectly... It was running in the past, i re-installed some days ago and now i have a huge problem. Basically, capturing the microphone works and it's sent to Mumble, however everybody also hears my desktop sound. I tried adjusting channels in KMix with no luck. Also i don't understand why the capture channels are enabled and must stay at minimum volume...
View 2 Replies View RelatedUbuntu :: Looking For KDE Global Equalizer
May 28, 2010I would like to have a global equalizer in KDE. I have done a bit of searching and didn't find anything that looked promising. It looks easy with ubuntu since it uses Pulse audio. I actually installed pulse audio and it seems to have somewhat integrated lol but I can't find an equalizer to see if it works.
View 5 Replies View RelatedUbuntu Multimedia :: 10.10 Sloppy Video - Desktop Effect Cannot Be Enabled
Oct 18, 2010I installed 10.10 (tried upgrade and clean install) on my thinkpad x40. I could not enable desktop effects and video playback is very sloppy. On 10.04 works fine. I tried compiz-check
Code:
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Driver in use: intel
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system...
Checking for texture_from_pixmap... [ OK ]
Checking for non power of two support... [ OK ]
Checking for composite extension... [ OK ]
Checking for FBConfig... [ OK ]
Checking for hardware/setup problems... [ OK ]
This is the output on 10.04
Code:
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Driver in use: vesa
Rendering method: AIGLX
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped:
Error: vesa driver in use
Would you like to know more? (Y/n) y
The vesa driver is not capable of running Compiz, you need to install the proper driver for your graphics card. I tried with newer kenel, but no luck. I tried to install the newer driver from intel. I am not quite sure I managed to install them properly, though. Is this the appropriate sub-forum for this topic, or "hardware and laptops".
Debian Multimedia :: Gnome Does Not Load If KMS Is Enabled
Mar 8, 2010Gnome loads without problems when Kernel Mode Setting is enabled. Original message
Daily updated Debian Testing | Custom Gnome installation
Intel GS45 chipset | Intel GMA 4500HD graphic card
The title is rather vague because I haven't been able to identify the cause of the problem. I installed Debian Testing using the daily builds of March 6th and 7th with the same results: the system fails to load the Gnome desktop after the log in. Instead, a pale blue background is shown. No panels, no window manager, nothing. I can move the cursor but there's no context menu and the key bindings don't work, turning the session useless. The problem exists in all accounts, and persists even when the dot-files are deleted after the first Gnome start.
After trial and error, I found out that if I changed to a virtual console (VC1 to VC6) and go back to VC7 (sometimes VC8), the Gnome desktop loads as expected. The pale blue background is shown over/instead of the actual background and I need to cover ("paint") it with a window to show the actual one. This pointed me to a Gnome Session or a graphics card error. Indeed, if I disable Gnome Session, the Gnome desktop loads after the log in. Of course, no interface settings are set. I checked the Gnome Session's bug list without luck and the error messages in .xsession-errors aren't conclusive, for they appear in other cases.
About the graphics card: the video settings work (screen settings, 3D accelaration, recovery after suspend to RAM/disk) but Xorg's log shows several erros and warnings when setting up the system (mostly related to the video and touchpad settings). Right now, I'm building a custom xorg.conf file to try to decreases udev's errors and see if it affects the Gnome problem. I've spent hours trying to solve this problem. It's annoying to lose interface settings after closing the session (key bindings and brightness settings, for example).
Debian Multimedia :: Audio Devices Not Enabled?
Sep 18, 2010On a fresh install of squeeze (with the exception of some installed video firmware and the latest updates from the repos) from the kde cd.
System is running an ASUS Sk8V motherboard with onboard sound, also a SB Audigy 2 ZS sound card. Speakers are plugged into the sound card.
Sound worked fine before in Lenny except I had to create /etc/modprobe.d/sound with the following to get the system to prioritize the SB card over the onboard audio
options snd-emu10k1 index=0
options snd-via82xx index=1
I've done the same with the new install, and still no audio.
I followed the troubleshooting steps from the FAQ forum, but am stuck on the end, which suggests doing the following:
The following string needs to be added to the /etc/modprobe.d/alsa-base.conf file
options snd-hda-intel model=YOUR_MODEL
Ubuntu Multimedia :: Find A Package For Mplayer With Dvdnav Support Enabled?
Jul 10, 2010where I can find a package for mplayer with dvdnav support enabled?
I was disappointed to discover that in 10.04 dvdnav support was disabled in mplayer. I rely on it for my mythtv front end box to be able to play DVDs. According to a bug it was disabled because of an upstream email chain where dvdnav was considered 'experimental' and 'not ready for production use'. Funny as it worked fine for me.
Post #6 here is where I found the above reasoning for it being disabled.
[URL]
Applications :: Is There Equalizer That Works For All Ubuntu Sounds
Jan 1, 2010is there a equalizer that works for all ubuntu sounds? after looking around it seems that equalizers are pretty rare in ubuntu.
View 1 Replies View RelatedSoftware :: Cannot Use The Equalizer On Amarok 2.2.0
Jan 17, 2010I cannot use the equalizer on Amarok 2.2.0.Ive installed the Phonon-gstreamer backend and works fine-except the equalizer.When installing the Phonon-Xine backend i can use the equaliser but I lose the sound.Any reason why all this?
View 2 Replies View RelatedUbuntu Installation :: Audio Card VIA VT1708B - Can't Find Equalizer
Aug 12, 2011i have a problem with my sound card VIA VT1708B. I can't find equalizer and I can't find the option for turnin on for front panel(headphones & mic)
View 1 Replies View RelatedOpenSUSE :: Can't Find Pulse Audio Equalizer
May 14, 2010I was looking for the Pulse Audio equalizer in the repos and saw that it wasnt there? All the other Pulse Audio stuff is there but not the Pulse Audio equalizer?
View 9 Replies View RelatedSoftware :: Keep Equalizer Setting In VideoLAN Whenever I Restart It?
Jun 25, 2010Why do I always have to reset the equalizer in VideoLAN everytime I start it. Is there a way to keep the settings whenever I restart it?
View 1 Replies View RelatedUbuntu Multimedia :: Lenovo T400 - Intel Video Card And Compiz - Desktop Effects Cannot Be Enabled
Apr 4, 2010I'm running Karmic Koala 64 bit on my Lenovo T400 laptop with switchable graphics having both Intel and ATI video cards. I've set my bios to use the intel card only and turned the automatic switching off. So far so good, but I'd like to turn on compiz for basic window animations. When I try to start compiz by selecting
Code:
"Appearance Preferences" -> "Visual Effects" -> "Normal"
I get an error message saying "Desktop effects cannot be enabled"
Code:
"System" -> "Administration" -> "Hardware Drivers"
doesn't show any new drivers that could be installed. This was working out of the box when I first installed Karmic Koala a few month ago, but things got messed up when I installed the restricted drivers for my ATI card. Now I can enable compiz if I switch to ATI from my bios settings and install the drivers but I don't want to use it due to high power consumption and I've removed the ATI drivers.
Here is my xorg.conf file:
Code:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]....