I have installed the recommended driver for my nvidia card (185), and after much fiddling finally got my config file to stick and boot correctly, however I can't see the output of the media player or the DVD player. The files play because I can hear them, but I don't see any output. I have moved the depth to 16 bit, but I still don't get anything.
View 3 RepliesI have NVidia 8400gs. After fresh install my splash screen is at good resolution but after installing nvidia drivers I got resolution issue at splash screen. And when playing hd files in movie player i.e. totem I get slow frames. and in mplayer I got this error "could not open directshow codec wmvdmod.dll" but file plays in bad quality than windows.
View 9 Replies View Relatedcurrently using nvidia accelerated graphics driver (version 185) and a nvidia 8800gt. cpu is an intel c2d e6600, so it's quite a fast pc. video playback is extremely choppy to the point of being unwatchable. it affects all applications that i have tried, such as vlc, movie player and flash videos in mozilla firefox. videos on videos seem slow but playable, but when i try to watch them in full screen there's a drop to about 5fps. cpu usage reaches 100%. scrolling is also slow on large webpages. disabling compiz makes no visible difference.
before i installed nvidia's driver, videos played perfectly. videos play fine in windows xp. it seems as if nvidia's driver is using the cpu to 'process' videos, instead of the graphics card. other than that, ubuntu 9.10 is lightning fast... so what's going on here? i have resolved one issue, that is flash player's performance in firefox. followed instructions [here] and videos is now smooth in full screen. other videos, however, are still stuttering and spiking cpu usage. this must be a widespread issue, but the lack of information on the web shows otherwise.
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. Do you or does someone you know have the same setup as I do? If so, do they have 1080p video playback working? If so, what driver are they using? I've tried following every guide I could find, but no luck so far. I have libvdpau1 and libvdpau-dev installed. I have the nvidia 195.36.24 driver installed (I used the nvidia installer). I have mplayer installed (which I compiled from source with --enable-vdpau).
I try to run mplayer with this command:
Code:
mplayer -vo vdpau -vc ffh264vdpau path/to/myfile.mkv
I get the following message in my terminal:
Code:
Error opening/initializing the selected video_out (-vo) device.
I have libvdpau-dev and libvdpau1 installed.
After Googling this problem, I found a post that suggested the following steps:
Code:
sudo add-apt-repository ppa:nvidia-vdpau
sudo apt-get update
sudo apt-get install nvidia-glx-195 nvidia-195-modaliases
It turns out that I had already added the nvidia-vdpau repository. However, despite that, I get:
Code:
E: Couldn't find package nvidia-glx-195
The same problem exists for the nvidia-195-modaliases package. Do these packages exist? Is there some other way to get them?
Your Refresh Rate and Outputs HAS TO be the same freq as your monitor.This overwrites whatever you have set in NVIDIA X Server Settings.I use this on my laptop with an NVidia 8400GS card and on a Revo 3700 (with NVIDIA ION) through SMPlayer and XBMC.You can have choppy free and 'tear free' playback AND visual effects on!
View 3 Replies View RelatedI am trying to get audio to play in tv/monitor via HDMI cable. It seems ALSA does not recognize my nVidia audio device and can only use the onboard audio device. Here's some relevant info I have collected:
[Code]...
i installed the new beta 10.04 and it seemed right after the install and update that both nvidia hardware drivers were automatically install together. i deactivated both drivers. one driver showed the nvidia 173 driver and the other one showed "current" nvidia driver.
after a restart i then tried to activate the 173 driver. system required a restart. so i did. system booted to a black screen. i believe its at the desktop but i am unable to see it. i tried to hit esc at the boot screen to enter the grub menu but that didnt work.
Currently using Nvidia driver version 195.36.31, it's the version that works with Nvidia-kernel-dkms, would updating Nvidia driver to the current 275.09.07 driver version break my setup?
View 3 Replies View RelatedI tried to play a certain mkv file, AVC AAC, 720, but I got these error messages:
Code:
MPlayer 1.0rc4-4.5.2 (C) 2000-2010 MPlayer Team
Playing [Coalgirls]_Serial_Experiments_Lain_01_(1008x720_Blu-Ray_FLAC)_[F0EF8AF8].mkv.
[mkv] Track ID 1: video (V_MPEG4/ISO/AVC) "Serial Experiments Lain 01", -vid 0
[mkv] Track ID 2: audio (A_FLAC) "2.0 FLAC", -aid 0, -alang jpn
[mkv] Track ID 3: audio (A_FLAC) "2.0 FLAC", -aid 1, -alang eng
[Code]...
I am trying to update my Nvidia MX 480 GFX card. Today I figured out how to run the program as a root:
Code:
I run that and then this is what it gives me.
Where I got the link to download the nvidia driver from: [url]
I've installed 9.10 and wish to use the nvidia-glx-173 driver as recommended by jockey. Using the jocky GUI just hangs at 100% cpu, a significant portion of which is the cdrom process; I've tried installing the package directly in aptitude and get the error:
Code:
Media Change: Please insert the disc labeled 'Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)' in the drive '/cdrom/' and press [Enter]. The installation disc (standard x86 disk from shipit) doesn't satisfy it. How do I get aptitude to just download it from online repositories?
I have a Zotac IONITX-F-E motherboard (Intel Atom Dual Core 1.6 GHz + Nvidia ION) -based box with Ubuntu 10.04 64-bit installed. My goal is to play back 1080p video. I read somewhere that the nouveau driver that installs by default with ubuntu 10.04 does not support VDPAU. So, my first step is to install the nVidia proprietary driver. I tried following a half-dozen different guides for doing this, none of which worked. Let's take this one for example: [URL] I purge. I reboot. I run the Nvidia installer (NVIDIA-Linux-x86_64-195.36.24-pkg2.run). I get:
Code: ERROR: Unable to create '/usr/lib/nvidia-current/libGL.so.195.36.15' for copying (no such file or directory). So, I run: Code: sudo apt-get install nvidia-glx-185 nvidia-185-modaliases I try the nvidia installer again. It works. I reboot. I get a message saying that ubuntu is running in low graphics mode, because loading the nvidia kernel module failed. I check /var/log/messages and see: Code: API mismatch: the client has version 195.36.24 but the kernel module has version 195.36.15. I take a Tylenol and here I am.
I just performed a clean install of Kubuntu Lucid earlier this week after deciding it was time to upgrade from Hardy. Pretty much everything worked, until I attempted to install the proprietary NVIDIA driver.
OS details: Kubuntu 10.04 x64 Kernel 2.6.32.22.What happened when I tried to install the proprietary nvidia-current package was simply that it didn't work. I could open the nvidia utility, it would say the driver was not in use. Attempts to force the issue by running nvidia-xconfig would render the X server unable to start, which gave me some quality time in a shell console with APT or restoring the xorg.conf file from backup. Trying to compile and install the driver from nvidia also wasn't working out so well.
I think the issue boiled-down to the install presumably attempting to upgrade the kernel during initial install from CD, but not doing so completely. I had all the appropriate 2.6.32.22 kernel and header packages, but GRUB was apparently still booting to the 2.6.32.21 kernel (which had no headers or anything) and not giving options to boot to the upgraded kernel.
How I fixed this was to remove all packages related to the 2.6.32.22 kernel via APT, then remove all the 2.6.32.21 kernel packages. That second operation triggered the 2.6.32.22 kernel to be reinstalled, and GRUB to be configured correctly to boot to it. At that point, I reinstalled nvidia-current, and it worked. I tried this after determining I was on the 2.6.32.21 kernel, and had no option to boot to the 2.6.32.22 one.
Your mileage may vary. In retrospect, I probably could've fixed it by fixing GRUB to boot to the current kernel. This appears to be a consistent issue, as I reinstalled at one point, just to start over, and went through the same thing again.
I suspect the driver I obtained from the nvidia website and patched (due to issues it has with recent kernels) might work now that I'm booting to the correct kernel with headers, but I think I'll save that for another time since nvidia-current is working great for me at the moment.
I wish to update my nvidia driver (I was running 195.36.24 and I want to update to 195.36.31). I followed all the instructions on this thread (http://ubuntuforums.org/showthread.php?t=1467074) and everything went well until this part:
Code:
sudo sh blahblah.run
The error I get in the terminal reads: You appear to be running an X server; please exit X before installing. For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at [URL]...I have no idea how to exit X as it's not in my system processes.I have updated my nvidia driver in the past but have never encountered this problem. I'm running Ubuntu 10.04 on a Dell XPS M1530 if that matters.
[URL]. I now have both monitor working and noticed my drivers are not current. I have the older ones installed. The 260.19.06 one. I installed via the suggested restricted driver utility in ubuntu 10.10. I don't have full use of the graphics and would like to install the latest driver.
Question:
1. Do I uninstall nouvea and nv drivers (still installed)
2. Do I uninstall the current nvidia driver, then do a manual install of the latest driver from nvidia?
Installing Mythbuntu 10.10, which I finally got installed properly. At first I installed the open-source video drivers just to make sure the installation worked, then I installed the "version current" proprietary drivers using the graphics drivers manager...tool...thing. However, when I restarted the computer, it has a text-mode splash screen and I stay in the first virtual terminal.
If I try to go to the GUI "terminal" [Ctrl-Alt-F7], it appears to be partway through some kind of check:
Code:
I ran sudo dpkg-reconfigure xserver-xorg to try to get back to the open-source drivers, but it didn't give any text output and went straight to the next line of command prompt, when I restarted it did the exact same thing. Any tips for at least getting back to the open drivers? I'd like to not have to reinstall again (I'm dual-booting WinXP,). The card in question is a GeForce 6200 AGP.
My ubuntu 10.04 64 bit system uses the nvidia driver 195.36.24. I do not remember installing it, but I must have installed it using "official channels".In fact, the package nvidia-current is installed on my system.What is the cleanest way to upgrade to a later version of the nvidia driver? I need to do this in order to run a CUDA 4.0 enabled application. Minimum driver version I need: 270.41. I'm willing to ditch Ubuntu 10.04 if necessary.
View 4 Replies View RelatedJust installed Ubuntu, have no idea what I'm doing. This message appears and don't know how to do it. "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."
View 2 Replies View RelatedI want to install new nvidia driver for geforce 8600 on ubuntu 10.04 but I recive the following error: The binuteals is not installed on the system.
View 1 Replies View RelatedAfter having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
I'm using my Ubuntu 10.04 as a server, headless or with HDMI receiver/TV setup. There is a lot's of topics how to make it work headless/VNS. I found the least trouble is to make a fake VGA from old VGA cable and 3 resistors. However, when I start my Ubuntu with Fake VGA it won't switch to HDMI when I turn my Receiver/HDMI on. If I restart X it is fastest way to pick the HDMI Video/7.1 Audio up. I can do it via VNC or ssh and going to do it with 'irexec' so my wife will be able to redetect the HDMI and run XBMC with one button click of the remote.The problem is restarting X kills all my GUI apps (KTorrent, ...). Is there a way to force the video driver to restart or redetect the screens?
View 1 Replies View RelatedI am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies View RelatedI upgraded to 10.10 from 10.04, and I noticed that the nvidia driver are not working all well as they did before.
Although I get the nvidia logo when X starts, the 3d part does not work well. For example using mplayer -vo gl does not work anymore. When I type glxinfo I get the x error of failed request badwindow message. More anonyingly flash will crash when going to fullscreen.
The 2d part of the drivers seem fine because xvinfo and -vo xv works fine.
I used Gefoce9400GT , 190.53 nvidia driver, configuring Mulitiple X screen both CRT and TV, work fine if CRT and TV connected to card, but I hope foce TV-out output signal, means that if not connected to TV, the SVIDEO can output signal. Because the line too far, cannot detect TV connection, so I think foce output TV-out signal. I used Option "ConnectedMonitor" "CRT, TV". Can force found 2 display device, have 2 screen ok, but not display at TV if not connected TV. I do not understand why the TV has been forced output signal does not display images, they can be connected to the TV show?
View 2 Replies View RelatedEver since I upgraded my video driver (the proprietary NVIDIA drivers) to 270.18, I have been experiencing lag when typing and when using Compiz as my WM. I can work around both problems by switching the WM to Metacity, but obviously I don't want to continue using that. I have tried changing my Compiz settings but to little avail. If you want my OS and graphics card, the OS is Ubuntu 10.10 and the graphics card is a NVIDIA GT 330M.
View 1 Replies View RelatedI am trying to install ubuntu 10.10 on my new computer: an Asus U33Jc. It is a 64bit machine. Everything seems Ok until I try to install the nvidia drivers. First, I tried to install it through the graphical interface as it popped up shortly after the install. Then, I tried to install the most up to date driver (290.19.36) found on nvidia's website. In both cases I get the same problem.
When I boot the computer it freezes at startup typically at the stage: "Checking battery state..." but not only (sometines before or after). In any case I never get to a graphical interface. I looked at many forums on the web (here here here and here for instance). But no solution work so far. Apparently there is a conflict with nouveau so I have blacklisted it. It seems the computer does not send the information on the good output, so I tried to twick my xorg.conf in different ways without any result.
I'm trying to get my nvidia card working on my Lucid machine using the proprietary driver (yes I know; have to have 3d for my Nexsuiz to work at a reasonable framerate). It works fine with the nv driver, but as soon as I use the nvidia driver I get a messed-up screen (see attachment). The /etc/X11/xorg.conf for the nvidia driver contains:
Code:
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
[Code]...
So does anyone have suggestions to allow me to use the nvidia driver? Perhaps I need a custom modeline?
I just installed Natty. Installed nvidia-current via synaptic. Then uninstalled nouveau via synaptic also. Back to Unity desktop, I chose Additional Drivers and activated "nvidia-current". However, after reboot, the info window says this driver is activated but not in use.
View 9 Replies View RelatedI'm having issues installing the nvidia-96 driver package on the new Lubuntu 11.04. I have a GeForce4ti 4200 card and have had that driver package install successfuly on numerous flavors of Ubuntu over the years.
apt-get spits out the following error:
Code: The following packages have unmet dependencies: nvidia-96 : Depends: xorg-video-abi-8.0 but it is not installable Depends: xserver-xorg-core (>= 2:1.8.99.905-1ubuntu3) but it is not going to be installed
Meanwhile, a check of the currently installed xserver-xorg-core through apt-cache shows:
[Code]...
The nouveau driver does work, but I would really like full 3d acceleration like I have had in the past.
I am using 10.10 64bit with a Nvidia GeForce Graphic Card on my Acer 5741G 434 Notebook.
I have always used Compiz and without it I can barely use my Notebook. Apparently I had to install the Nvidia accelerated 3d Drivers (current version) in order to use Compiz.
However I cannot enable the "normal" visual effects (right click on desktop / change bakcground/ visual effects) that are necessary for using compiz.
Also everytime I reboot my resolution goes back to 800x600 although I saved the resolution to 1366. So everytime I start my Notebook I have to go to the Nvidia X server settings and set the resolution to 1366.
What I tried until now:
- I tried to reinstall Ubuntu twice!
- I tried to unistall all nvidia Drivers and install through the terminal using the command "sh" the nvidia drivers i downloaded from their website
- I tried to use the nouveau open source driver
Additional Information:
- when I boot a logo of the nvidia BETA driver appears
- for the past couple days I even experienced another problem: the windows do not have the minimize/close and maximize buttons
I am even willing to install the System again!
I had nothing but problems with the latest 10.10 ubuntu distribiution.