Ubuntu Multimedia :: Stuck In Terminal Mode After Video Card Installation
Mar 29, 2011I Am considering adding a sound card to my system and I am open to any suggestions. I have a lot of media files and I also do some gaming.
View 1 RepliesI Am considering adding a sound card to my system and I am open to any suggestions. I have a lot of media files and I also do some gaming.
View 1 RepliesHow do I check what video driver I have installed in the terminal? Then how do I install or yum install it? I wanna do everything through command line soz.. I have an ATI 4850 I believe.
View 2 Replies View Relatedsetup the correct mode for my laptop-video card-monitor
Video card - ATI mobility Radeon X1600
External Monitor - Belinea b.display 2 22"
Right now the external monitor is working, but sometimes it goes black for 2-3 seconds and then works again. This happens sometimes 5 times in a row, sometimes once, sometimes none. Other issue, when I install any new kernel it doesn't work. I get weird picture on monitor.
I have just installed Ubuntu 9.10 Karmic on my HTPC, and it detected my TV (connected via DVI, so is a monitor effectively) OK, and displayed the proper resolution of 1360 x 768. I want to use the proper nVidia drivers which I've enabled using the restricted drivers tool in Ubuntu. On doing this, it has set the resolution to 640 x 480, and the nVidia configuration tool will not let me set it any higher.
1. The contents of xorg.conf are now irrelevant as of the last few versions of X?
2. The nVidia software is not reading the EDID information from my TV properly?
My video card developed problems, so I followed the suggestion in this thread:
Quote: Boot into recovery mode, then choose root, for a command prompt and enter
Code: dpkg-reconfigure -phigh xserver-xorg
but my ubuntu 10.04 32-bit system still won't boot. Shortly after the ubuntu logo comes up, before the login, my screen goes black and there is no more video signal. What else can I do to reset the video configuration? The card only has this info on it: I could put the card back in the system, reboot, and then pre-configure the system to drop to the intel 865G on-board video, but the msi card has intermittent problems and will spontaneously re-boot several times during the first ten minutes of turning on the system.
Kernel 2.6.21.5, slackware 12.0
When you do 'man bash', you'll see some words are highlighted. I'll say that the video card has used high intesity in these instances. How do I disable this video card capability? Can this only be done by recompiling the kernel? Of course, I am talking about the text consoles, i.e., the video card in text mode.
My system: Pentium 4 3.6 GHz, 3 Gb DDR ram, GeForce 210 video card, Ubuntu 10.04.
I have previously used Cinelerra-cv (on Karmic) and recently Openshot (on Lucid) with not much trouble. I have been sampling other video editors (Kdenlive, avidemux, kino etc). Now I have my video card crashing whichever I use, mainly when trying to load clips. I have disabled Compiz, uninstalled all video editors and then reinstalled one at a time. I still get early video crashes whichever I try.
OK I installed WINE but right now the installation is stuck at the package configuration TERMINAL. This is what the terminal says. TrueType core fonts for the Web EULA
[Code]...
So I managed to install Debian Jessie on a MSI G70 2PE Apache Pro that came with Windows 8.
First I partitioned some space on the laptop. Then I put on the net install cd for Debian and installed it on UEFI mode. It installed correctly.
Now I'm on Grub and when Debian tries to boot it gets stuck on "Loading initial ramdisk". The cursor under it doesn't even blink. The only way to get out of there is by Ctrl-Alt-Delete. Secure Boot is turned off. Fast boot is also off. If I try to boot on recovery mode gets stuck all the same.
The options on my grub are
Debian GNU/Linux
Advanced options for Debian GNU/Linux
Windows Boot Manager (UEFI on /dev/sda2)
System Setup.
If I choose the Windows option, Windows boots, no problem.
If I choose the edit option for the Debian entry this is what it shows
Code: Select allload_video
insmod gzio
insmod part_gpt
insmod ext2
set root='hd0,gpt6'
if [ x$feature_platform_search_hint = xy ]; then
[Code] ....
What is happening and what should I try to make this work? Could it be a graphics card issue since this computer has a Nvidia Gpu?
Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...
Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.
However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.
Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies View RelatedI use natty 64 bit. I installed a HD 4870. Installed the drivers according to instruction on [URL]. I ran aticonfig --initial. Still I get "Cannot Display This video Mode" after the grub screen, during boot up. Monitor preferences applet doesn't seem to work, either - it won't detect the monitor parameters EDID thing.
When I try to open the Catalyst Control Centre I get:
p, li { white-space: pre-wrap; } "There was a problem initializing Catalyst Control Center Linux edition. It could be caused by the following.
No ATI graphics driver is installed, or the ATI driver is not functioning properly.
Please install the ATI driver appropriate for you ATI hardware, or configure using aticonfig."
Here are chunks of xorg log (I cut the non video bits).
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[210.874] (II) LoadModule: "extmod"
[210.875] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[210.875] (II) Module extmod: vendor="X.Org Foundation"
[210.875] compiled for 1.10.1, module version = 1.0.0
[210.875] Module class: X.Org Server Extension
[210.875] ABI class: X.Org Server Extension, version 5.0 .....
Whenever I play a video via vlc or kaffeine and I switch to full screen I get lag. If I move my mouse to show the controls it plays perfectly. How can I fix my full screen playback issues?
View 9 Replies View Relatedmy computer is currently stuck in "Grub Rescue mode" I don't know how to get it unlocked. I tried installing the latest ubuntu from wubi after I deleted the partition for 11.04 beta I had already had (I had some issues with 11.04 so I went to windows (it's a dual boot machine) and cleared the partition) After I got rid of ubuntu from there I don't think it automaticlly got rid of grub, which I was unaware of. So I continued to go through Wubi for to install 11.04 side by side Windows and to be used with the windows loader.
After I got thorugh all of that stuff I was instructed to restart my computer (as usual) and I did. But as soon as my computer came back on it came into "grub rescue>" with the error message at the very top of the screen "error: no such partition." I am currently using a different PC to type this. I would like to know how to get out of the rescue loader and at least back into windows (I have windows 7). I don't care to much if I can make it into Ubuntu as I have most of my more important files on Windows. I'm kinda scared atm, because I read somewhere earlier that I can't really do anything unless I have the windows boot disc, which I don't.
video in videos disappears when i try to see it fullscreen. happens everytime. i'm using firefox 3.6.6. what is wrong here?
View 5 Replies View Relatedrecently i installed ubuntu (gnome) 10.10. i'm lovin it but only thing is bugging me is this annoying noise whenever i try to see a video on web or using vlc. i m using dell inspiron 6400. IT has VGA compatible controller: ATI Technologies Inc Radeon Mobility X1400 My glxinfo outcome is :
HTML Code:
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
[code]...
now my main problem is whenever i change my visual settings from none to extra , i start getting noise on my usb headphone or even on my speakers especially if i play a video on full screen mode it become worse .. it starts constantly makeing buzzing noise. sometimes even when i minimize or maximize or scroll up down a window...
if i put the visual effects in normal mode i still get the noise on video playing full-screen mood but this is time bit low and on none mode i get the noise too but very low... so i m assuming there must be some problem with my vga card which is causing this chaos. unfortunately there is no driver for my graphics card dat ati supports on ubuntu, so i used gallium 3d project using this ppa https://launchpad.net/~xorg-edgers/+archive/radeon .. graphics works fine now but this nosie is killing me ..
is it possible to rip a Video DVD to hdd with a command line command ? Or with a bash script. What I want it to do is to rip the Video DVD as is in VIDEO_TS structure to the HDD. No encoding to other formats.
Can it be done ? And How ?
I have just upgraded my IBM desktop to Ubuntu 10.10 form 10.04 (which by the way worked well). After the update it boots up into the terminal mode. What gives and how do I exit it and get into the deskop.
BTW I also updeated a 10 year old laptop and there are no problems. I am using it right now.
I'm looking to replace my video card...
From what I can tell (From Looking at forums)
Nvidia is the way to go with Ubuntu
Just want to double check that, since the newest post I found was a couple years old.
The video card I have now should be more than good enough for me.
All I do is watch videos and brows online.
But videos and desktop effects are both very choppy.
I realize that if I take the time, I can probably get my card to work well, but I just don't have the time.
Looking for a new card between $100-$150 that will work perfect right out of the box.
After a post on the wine forums came to the discovery that my ATI radeon 4850 graphics card is causing much trouble in my ubuntu machine because of the lack of support. And because of that I cannot play my favorite games through wine. So now I'm saving some money to buy a new graphic card. A nvidia this time.
Now I don't know all that much about graphic cards, but I am looking for a card that works well on ubuntu that equals the performance of my old 4850 and fits my P5Q pro motherboard.
I myself don't know much about good graphic cards so if I go off to buy something without good advice I probably end up with something that does not work or fit or something like that.
We at church are going to build a new computer to use with Datasoul, therefore I need to use 3 monitors.I've been searching about it and it seems very hard to configure Ubuntu to use 3 monitors. I know in Windows it is very easy to configure, but our budget is very small and we cannot afford to purchase a Windows license, so I need to know which video cards to purchase in order to be easier to configure; ATI or NVidia?
View 6 Replies View RelatedI'm looking to put a new video card in my desktop. I need one that will be able to handle H.264 at 1920x1080, and I would like to find one that can do HDMI with audio. Shopping for video cards, as I heard somewhere, is the kind of thing that makes you want to bang your head against a wall until you go blind, because then you won't need to worry about it any more... someone will be able to recommend a model, or at least a chipset or something, before I rip my own eyes out.
View 6 Replies View RelatedI just received a band new DELL laptop with a blank disk and installed Kubuntu Lucid Alternate 64 on it. No problem during install (the only option I specified was for an encrypted LVM), but when I try to boot all I can see are colored lines scrolling/blinking on the screen. If I press any key it changes to white text (unreadable) scrolling/blinking.
If I press a key during the boot and get into grub, I cannot edit the boot options, cannot go to command line, cannot use MemTest86 (maybe because the partition is encrypted). Booting with the recovery mode shows the same lines. Edit: if I try to boot with the standard LiveCD, I get the same mess, so it's abviously a video card problem. Damn, I had checked beforehand that Ubuntu could run smoothly on it.
I currently use "MSI Radeon HD 3650 Graphics Card - ATi Radeon HD 3650 750MHz - 512MB GDDR3 SDRAM - PCI Express" that have no HDMI and some problems with Ubuntu. Due to the Ubuntu compatibility problems I decided to ask you guys for recommendations before upgrading to a new video card.The only "demand" is that the card must have dual HDMI outputs, one for the monitor and one for the TV.
View 6 Replies View RelatedI'm planning to upgrade my wife's computer when 10.04 comes out, what is a good cost effective video card to support compiz effects?
View 5 Replies View RelatedI am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies View RelatedI'm working right now with a newly installed Lucid 64-bit. Everything it's fine, but I would like to use the dual monitor for my work, and so I decided to ask to buy me a video card, since what I have now is an onboard graphic that doesn't allow me to do it. I don't need to play games (well I don't think my boss will be happy about it ), and I would rather go for a not expensive solution. But I have some doubts regarding the compatibility with my linux. I found several things on the web, but nothing regarding the video cards that I individuated. If the card is auto detected, it would be better of course.
The cards I was interested are:
ASUS RADEON HD4350 1GB DDR2
SAPPHIRE RADEON HD5450 512MB DDR3
But then i've seen on the web you might have problems with ATI in linux and so I went looking also for Nvidia which I found is generally better implemented under linux: ASUS GEFORCE GT 210 512MB DDR2
PALIT GEFORCE GT 220 SUPER 512MB DDR2 I don't have many models among which to choose, because of some conventions at my workplace. The tables of compatibility with ubuntu that I found are all related with much more expensive models, or models that I don't have in my lists. Could somebody tell me if one (or more) of the cards mentioned above work under ubuntu 10.6 64-bit? I have a Hewlett Packard system with:
HP 3674h motherboard
Intel core2 duo 3.16 GHz
8Gb RAM
250 HD
im having a lot of issues with my video card, i can't install it correctly i get low graphics mode and some times a black screen..login+password i had read a lot of post, installed ubuntu a few times, done a lot of stuff but i can't get it, im a noob, using ubuntu for a week now and i love it.
View 6 Replies View RelatedWhen I watch a HD movie, the video will freeze momentarily sometimes. Would a 8400GS or 9600GT take care of this?
My video card is a 7300 le,
CPU= Phenom 8450
Memory= 4gb PC2-6400
Power= OCZ Fatal1ty OCZ550FTY 550W
I recently installed a new evga nVidia GT 430 video card in my Ubuntu 10.10 32-bit system. This had the unforseen side effect of eliminating my sound.
I had no idea that the new video card would include a new sound module. My intent is for my system to use my Soundblaster Audigy2 soundcard in 5.1 output mode. The system still seems to be configured to do that, but the nVidia HDMI Stereo output module seems to have taken over in Sound Preferences.
Here is the output of lspci:
Code:
lspci
00:00.0 Host bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub (rev 04)
00:01.0 PCI bridge: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port (rev 04)
[Code].....