Ubuntu Multimedia :: Profile For Internal Audio Device Keeps Changing?
Jan 27, 2011
I can get sound out of my machine just fine, but for some reason, no matter what audio player I use, every time I change the song or pause playing half my speakers will kill sound and it will seem like the sound profile has reverted to Analog Surround 5.0 Output. When I check my sound configuration it still lists 5.1, and I have to select another setting then change it back to 5.1 to get my speakers all functioning again.
View 1 Replies
ADVERTISEMENT
May 31, 2011
I didn't leave much space for the / folder during installation of squeeze and now I can't seem to copy over old profile folder from a windows install of thunderbird. Any way to change the location of the profile folder?
View 4 Replies
View Related
May 17, 2010
In usr/share/banshee-1/audio-profiles/ there is an audio profile called "aac-novell", which is used to encode CDs to m4a format.
The problem is, this audio profile does not appear in Banshee itself, and I don't know what the problem could be (I've got every AAC encoder dependency installed).
Has someone been able to use this audio profile?
View 2 Replies
View Related
Jun 5, 2011
I would like to use HDMI on my graphic card for audio output. ALSA shows it as a card with 4 devices and I can get sound through one of them (the other three are different channels, perhaps? I have only stereo output connected). Although Pulseaudio has the right card set as default, it seems to me that it plays on a wrong device. Pacmd shows that the sink has parameter alsa.device set to the first device listed by ALSA, but I can get sound only from the second one.How can I force Pulseaudio to use another device of the same card as a default output?
View 2 Replies
View Related
Jan 15, 2010
Is there any way to record audio from internal source with gtk-recordmydesktop?
View 2 Replies
View Related
Jan 6, 2010
script which adjusts my NVIDIA settings to HDMI and also my Audio output to my digital output. I feel its quite a lot of clicking to get my signal to my LCD.So I hope somebody already had this idea and can give me the script or can assist me in writing it myself. I think its not a complicated script. i guess its only 2 lines. But i am not exactly a pro in Ubuntu..So as i said i have a NVIDIA graphic cardand aplay -l shows
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
View 1 Replies
View Related
Jun 12, 2010
I'm still working on ubuntu 9.10 with an acer aspire 1810tz. To use my microphone I found out that I have to change my microphone settings because it's mono and the default setting is thinking it's stereo: With the Volume Controller I setup one chancel to 5 and the other to 90 and the mic is working fine. Starting Skype and using it I see that the setting is reducing the volume for the mic below 20, so nobody can hear me. I tried closing first Volume Controller and then starting Skype, no matter the volume of the mic is reduced. How do I stop this behavior?
View 2 Replies
View Related
Feb 8, 2011
No audio input device can be found in sound preference>input but in sound preference>hardware>it shows the input webcam recorder device.
When I use
Code:
alsamixer
onto terminal it shows this
and also i checked cable device and everything. And it was working till I last hour. I rebooted computer then there's some problem, I haven't change anything before or after rebooting.
View 3 Replies
View Related
Jun 1, 2011
I need to capture from my webcam. It has a mic too.I can specify video input device as /dev/video0.I specified input audio device as /dev/dsp2 ( OSS device, corresponding to USB Webcam), Now VLC throws an error, "VLC is unable to open the MRL 'alsa:///dev/dsp2'. Check the log for details".Thinking it wants an alsa device, I specify device as /dev/snd/pcmC2D0c. (got it from kinfocenter and dolphin). Now again an error, "VLC is unable to open the MRL 'alsa:///dev/snd/pcmC2D0c'. Check the log for details.".I try with any device, the same error. I have added myself to audio device so that I can read/write to the mentioned devices.I see no way of switching VLC to use OSS. And I see no information (documentation on net) on it's expected device listing for audio.
View 5 Replies
View Related
Mar 27, 2010
i am using ubuntu studio karmic and i have a digitech vx400 audio effects pedal which serves as an audio in/out midi in/out device via usb. i can sucessfully set it as the system sound device in system>preferences>sound for both input and output. but, when i play audio through it it only works for a few minutes before the sound stops completely. if i leave the system settings set to the internal sound card and configure jack audio connection kit to go to the usb device, i get the same results on the usb sound. a few minutes of playback at the most.i can restart sound with either "pulseaudio --kill && pulseaudio --start" or "alsactl init" in either situation. just requires restarting the programs. same results after restarting. i think this is alsa related as i have both the system sound and jack using the alsa driver, but i don't truly understand the relationship between pulseaudio and alsa.
View 5 Replies
View Related
Jun 24, 2010
When i turn on my computer and log in i get a notification that says "Phonon: KDE's Multimedia Library -- The audio playback device HDA Intel (ALC880 Analog) does not work." and the system falls back to pulse audio.
Also, i noticed that if i wake my computer from hibernation then the HDA Intel device will begin working again.
I read through the comprehensive sound guide with no luck, this behavior seems very strange to me and im not sure what is causing it. I would much rather use the HDA Intel sound device than Pulse Audio.
View 2 Replies
View Related
Jul 4, 2010
Is it possible to pipe audio from espeak into a microphone device?
I've tried doing
Code:
sudo espeak --stdout "Hello world." >> /dev/audio
but I just get:
Code:
bash: /dev/audio: Device or resource busy
View 3 Replies
View Related
Aug 28, 2010
I use an echo indigo audio card. When I do aplay -l I see this card, and I can ouput audio through it by specifically telling mplayer to use this (alsa) device. Now I want to use this card as default for all audio. At the moment the default is pulseaudio through the built in soundcard. How can I change this? Im running Ubuntu 10.04.
View 4 Replies
View Related
Oct 15, 2010
I'm having here annoying "problem" with my webcamera. Everytime I want to use it as a microphone it needs to be switched manually in sound settings menu. It's not a big deal but I would really rather let it be switched automatically like plug and play or something like that.
View 8 Replies
View Related
Mar 7, 2010
I just installed Ubuntu 9.04 on my laptop then immediately upgraded to Karmic 9.10. Pulseaudio installed by default. There's no sound although the mute button is not checked and the volume slide control is at medium. lspci gives:
00:14.2 Audio device: ATI Technologies IXP SB4x6 Hi Definition audio controller (rev01)
System >Preferences >Sound >Hardware tab: blank window "choose a device to configure" Output tab: "dummy" output stereo
So, it appears that somehow the audio device controller in my laptop is not recognized or its driver disabled, possibly by pulseaudio. Sound works fine in Windows 7 part of this dual-booted laptop.
View 9 Replies
View Related
Dec 18, 2010
I'm running Ubuntu Maverick on an Intel H55 mobo. I have the sound configured to output through speakers on my monitor, via HDMI. That has been working fine. Last night I installed Skype (2.1.0.81) in order to chat to someone back in UK. When I go to the sound devices configuration in Skype, each of the devices (Microphone, Speakers and Ringing) only have a single choice: 'PulseAudio server (local)'.
In order to get my usb-connected phone handset working with Skype I have had to go to the main sound preferences and alter both input and output to '9980 Analog'. This works fine - I can make a Skype test call and playback my own voice. However, all my system sounds now go out on the usb phone handset - also the Skype ring goes to the handset, which is pretty useless because it can't be heard from more than a couple of feet away.
How can I make Skype use the 9980 device for voice in and out, and use the system speakers 'Internal Audio Digital (HDMI)' for the ringing, while leaving all the system sounds to go out on the HDMI output too? I'm sure that I managed to make Skype work much better on an older system (using Gutsy, or Intrepid???). It seems, to me that there is a lack of fine audio control in my system.
View 3 Replies
View Related
Dec 27, 2010
I recently installed Ubuntu on my HP Pavilion dv4-2012br and am really enjoying it, except that it is conflicting with my sound card. The only way I can hear some sound is going into System> Preferences> Sound> Output and selecting "Internal analog stereo audio" which makes the sound hollow and not at all pleasant to listen to music. When I mark "RS880 audio device [Radeon HD 4200] Digital Stereo (HDMI)" the sound is not played.
I followed step by step these instructions: [URL] yet the only way to run the audio through the "Internal analog stereo audio. "
Just adding: I used the "Install with Synaptic Package Manager" way to do it. And i'm using a desktop version of Ubuntu.
Here are some screenshots:
[URL]
View 9 Replies
View Related
Jun 29, 2015
-in Wheezy that exist: /etc/modprobe.d/alsa-base.conf
for edit audio device order (2 audio output).
-in Jessie not exist.
View 4 Replies
View Related
Feb 5, 2010
I have a Dell Inspirion 5150. The onboard sound card was blown 3 years ago. OS is Ubuntu 8.10. I am also a HAM radio operator and use the computer for digital modes using a USB device that acts as an external sound card modem for me.
The program that I use for that is fldigi. The device is Signalink USB by Tigertronics. the device has the ability to have speakers plugged in to it. Question: Is there a way to have the computer send the audio out the USB cable to the device?
I have looked at my sound settings and there are USB devices but none of them are the one(s) that I use with my Signalink device. If it can't be done, no worries -- have not really needed it so far. Just something nice to have.
View 2 Replies
View Related
Jun 28, 2010
I have detected some problems when I try to record sound in my Kubuntu 10.04 system.
The problem is that the "default" device for audio recording does not work but I have to select another device to do so. I always selected the "default" device for audio recoding but currently I have to select hw:0,2 device.
Another odd thing is that different programs show me different device. For example, Audacity shows me that I have the following audio recording devices:
- HDA Intel: ALC888 Digital (hw:0,1)
- HDA Intel: ALC888 Analog (hw:0,2)
- spdif
- default
The only one that works is hw:0,2.
But arecord shows me (when I execute "arecord -L") the following:
Finally, in KDE system preferences for audio I get that I have 2 different audio devices for audio recording:
- HDA Intel (ALC888 Analog): it is said that it will try first x-phonon (CARD=0, DEV=0) and, if the latter does not work, it will try plughw (CARD=0, DEV=0)
- HDA Intel (ALC888 Digital): it is said that it will try first x-phonon (CARD=0, DEV=1) and, if the latter does not work, it will try plughw (CARD=0, DEV=1)
Where is the hw:0,2? and how can I set the alsa system to use hw:0,2 as the default device for audio recording?
All of that would not be a problem but I also have an ubuntu 9.04 installed on a virtual machine (by using virtualbox) and audio recording doesn't work there. I suppose that it is becase of the virtual sound card is using default devices for playing and recording audio.
I must say that audio playback works fine in both host and guest systems. It is just audio recording.
View 6 Replies
View Related
Aug 7, 2009
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies
View Related
Mar 11, 2010
For those that use Virtualbox on their slackware host and have a windows (xp) guest running. I have tried various settings for sound (Alsa, PulseAudio), the AC97 drivers are installed in the Windows xp guest os, but there is no sound and there is an unknown audio device (in the windows device manager). If I remove the AC97 drivers and use the soundblaster16 drivers in the Vbox settings there is no unknown sound device, but there's still no sound. why I can't get sound working?
View 13 Replies
View Related
Apr 8, 2011
I run ubuntu 10.10 with apache2 and have 2 virtual hosts set up
here is an example of one of the virtual hosts
<VirtualHost *:80>
ServerName blah.endofinternet.org
ServerAlias blah.endofinternet.org
ServerAdmin davidboychuck@gmail.com
DocumentRoot /var/www/blah
[Code]....
Everything was working perfectly until i changed the internal ip of my router from 192.168.1 to 192.168.192 and now virtual hosting no longer works. As far as I can tell everything is setup correctly. I made no changes to the configuration files. Vhosts just literally stopped working. I've tried clearing dns cache not sure what to do at this point. I have tried to a2dissite and then a2ensite and reload the configurations but it literally just seems like apache is not looking for the vhosts in /etc/apache2/sites-enabled even though my apache2.conf still includes them
#Include the virtual host configurations:
Include sites-enabled/
From the apache error log:
[Sun Apr 03 16:41:50 2011] [error] [client 66.249.72.208] script '/var/www/index.php' not found or unable to stat
[Code].....
It looks like it's just not trying to use the vhost document root because when i go to blah.endofinternet.org it just takes me to the default site.
View 2 Replies
View Related
Jun 10, 2011
have an OpenSuSE 11.4 (Linux 2.6.37.6-0.5-desktop) with XBMC (10.1) installed.During installation of SuSE, I've created a user called "xbmc" and enabled autologin for this user. After XBMC have been installed I added the following to /home/xbmc/.xinitrc - "exec /usr/bin/ck-launch-session /usr/bin/dbus-launch --exit-with-session /usr/bin/xbmc --standalone -fs"... so far so good - everything is perfectly fine..... or at least almost - when trying to play some musik I get the message "Failed to initialize audio device, Check your Audio Settings"... but if I close XBMC, log in to Gnome as root, open a terminal an su to user "xbmc" and start xbmc from commandline it works if I choose "Internal Analog Audio" in System -> System -> Audio Output. Now the spooky/funny parts appears... I check the options in Audio Output I see the following:
With Autologin:
Defaults
iec958
hdmi
HDA Intel Defaults
[code]...
When returning to auto-login - it stops working again... By the way - to be sure that it wasn't a rights-problem, I ended up changing the UID for the "xbmc"-user to "0" to ensure root-privilegies
View 5 Replies
View Related
Jul 10, 2011
It's been ages since I've been on here I've been messing around with BackTrack. I've come back to Ubuntu but seem to be having some problems getting my wireless network thingy working. Here are the specs of my system. Any advice on fixing this would be very very apprciated.
02:06.0 CardBus bridge: ENE Technology Inc CB1410 Cardbus Controller (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82562ET/EZ/GT/GZ - PRO/100 VE (LOM) Ethernet Controller Mobile (rev 01)
10:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
On another note I'm trying to run debain I've got no startx on there or anything like that it's feeling very basic atm. I want to keep startx outta there but I can't connect to the Internet and run apt-get install to grab handy things.
I'm hoping whatever I am gonna do to solve this on Ubuntu will let me connect up to my wireless network with the internal network thingy. However if it doesn't I'm guessin I can just connect up physically to the router. Any tips on doing this from the command line?
View 7 Replies
View Related
Mar 21, 2010
I have an internal card reader that connect via usb. I'm finding that when I plug in a memory card a umount of the card "unmounts" the card reader. From that point forward I can't use the device without rebooting the machine! I've tried unloading the usb-storage module and reloading it but that doesn't help. I see the following entries in the messages file when I do that.
View 4 Replies
View Related
Jul 17, 2011
I'm trying to burn an audio CD with Brasero. Every time I try this, it fails, but it works when writing to an image file. Brasero quits with the following messages in log:
Code:
Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1744)
Unsupported type of task operation
Session error : An internal error occurred (brasero_burn_record brasero-burn.c:2862)
Do you know what could be causing this?
View 5 Replies
View Related
Feb 23, 2010
I have just installed Linux Mint on my MSI EX623 laptop,and i cant get sound on internal speakers...only on external ones...on external works just fine...i have tried all but just doesnt work...
View 1 Replies
View Related
Oct 17, 2010
I am using Debian Squeeze. When I try to play audio no sound comes out of my laptop speakers, but when I plug in my headphones they work.
lspci:
Code:
View 5 Replies
View Related
Oct 1, 2010
how to get the card number and device number on system for attched USb audio device?
View 3 Replies
View Related
