I am looking for a video editor that will let me open an AVI video and then save individual frames as image files (preferably JPG), I looked through the "Ubuntu Software Center" the only one that I found in there that would do this is "Video Cut" but when I try to open the 600+ meg AVI video I have it closes a moment later.
Anyone know of a video editor that will open a file this big and not crash?
I m looking for a video cutter that cut a portion of video in the given format, i tried ffmpeg and avidemux but they touch( some modification) the original video so output doesn't remains same as the source is there any software for ubuntu 8.04 hardy which cuts the video portion as it is and have command line support
View 9 Replies View RelatedI been struggling with this since Karmic and I know others have as well. This is really the only thing making me keep a Windows install around for my personal stuff.
Problem: Convert .TS files to iPod or really any smaller format keeping A/V sync after edit. I can covert my .TS file perfectly if I do not edit it but I want to just do a simple, quick trim of 2 mins from beginning and end.
HandBrake with convert the file perfectly but cannot trim. Avidemux does a great job on the video but I always have to play with the audio shift to get it in sync. It is usually betwenn -250ms to -1000ms off but I cannot count on it. If I run the video through DGIndex in Wine or view it with Mediainfo both programs detect the an offset problem but they are always wrong by almost 500ms and it is never constant.
Regular video editing I have pretty good luck with my normal DV files and I could even run the .TS files through other programs but it is too time consuming to be useful form this simple task. Anytime I want to take my recorded TV .TS files I cannot edit them quickly without making a full project out of it in Openshot Cinelerra, etc.
Has anyone found a quick, reliable way to do some lite video trimming in Ubuntu and keep A/V sync without having to resort to any Windows programs?
EDIT: Also I really do not want to resort to have to demux separately either. I know I am asking a lot but I got spoiled with a couple of Windows programs that will edit without reencode programs like VideoReDo can do the editing and converting all at once (for $100 !).
how I can decompose a video into its individual frame , so that I can apply my image processing algorithms to those images..
View 4 Replies View RelatedI'm trying to encode a video using only one image during a complete audio file, but a can't find the way to do it. What I need to do is to extend the duration of the frame up to the duration of the audio file. How do I do that with mencoder?
View 4 Replies View RelatedI want a video editing software for combining two videos at frame level. I mean, for eg: to show double action at a time in movie. We shoot two characters separately. And then we combine it as a single video with dual role effect. Now, I think you understood my requirement. Plz anyone tell that type of application which suits my needs.
View 3 Replies View RelatedIs there any video cutter software open source available. i found for audiocity for audio files. let say i have 15minute movie file, i want to split into 3 files of each 3 minutes. can we do it with this any software.
View 11 Replies View RelatedI am using Ubuntu 9.10. I have an Nvidia GeForce2 MX/MX 400 video card. When I changed my screensaver to something other than blank screen, it screws up my graphics. The Screensaver looks fine in the preview window, but if I click the Preview button (full screen), my screen becomes jerky and slow. My screen savers worked fine in 8.04. I recently upgraded and I began having this problem.
View 3 Replies View RelatedHow this can be done? I already have the necessary codecs installed and have kde 4.2.
View 9 Replies View RelatedI've got a 1920x1080 video I've edited and rendered with Cinelerra, and I'm trying to use ffmpeg to transcode it to something smaller. However, when I use a command like this, for instance:
Code:
I inevitably get some weird green band at the bottom of the frame in the converted video. I know that there's some weird pixel stretching going on here, because the NTSC standard for 16:9 is 720x480 with rectangular pixels, and the 1080 version has square pixels, so I'm guessing the green band is an artifact of that process?
Video player that runs on linux that allows for frame by frame advance. or that i can really really slow down . Because what i want if something that behaves like Quicktime. allowing for single frame advance.
My understanding is that VLC will never do that because it is more of a network stream ....animal.
also the player needs to play 422 uncompressed yuv yuy2 - avi or qt.
I tried reinstalling a better driver for my laptop the other night so that I could get a better frame rate while playing C&C Renegade. I was only getting 10 FPS and my ping was insanely high. So I went about installing a new driver and when it rebooted it started up in low graphics mode, asking to switch the driver. I tried everything I could, but nothing seemed to work. Right now, I get the boot screen and login screen and it looks normal, but once I log in, it flashes my background like its loading without a problem, but then it goes to a white screen. I can see my mouse on the screen though, and I know everything is working behind the white screen, because I can click stuff and can see my CPU LED blink, and I can use my desktop cube when I hold CTRL+ALT+(arrow). So I'm officially confused. I'm assuming there has to be some way to restore my driver somehow... BTW, Same thing happens when I boot into Gnome, X script, and Gnome Failsafe. The only thing I can do is boot my Live CD.
Here are my specs:
Acer Travelmate 2450
40 GB Hard drive
CD-RW Drive
ATI Xpress 200M (up to 128 MB, which is what it's set at)
Atheros WLAN card
I'm using Squeeze Gnome.
When I watch videos within my browser, they play fine until I expand it to full screen, then the frame rate slows way down.
I've been reading related posts, If I install the gecko media player, will that solve this problem?
I would like to install "Jing" a video screenshot saver, can I Install it on Ubuntu>>>
[url]
I'm wondering if there is a method for leaving the screen saver set to appear after, say 4 minutes, but to NOT have the screen saver activate during a streamed video. For example, any time I wish to stream a video through Firefox, I must open screen saver settings and deactivate. I was wondering if there is some way to maybe lower the priority for the screen saver below Firefox or Flash player, etc. Or if there is another work-around that is simpler than monkeying with the settings every time.
I haven't noticed this problem when using media players to mount local files, such as vlc. I'm running 64-bit KDE 4.6.4 Tumbleweed (from 11.4), FIrefox 4.0.1, Linux 2.6.39.1-33-desktop x86_64. Last 'zypper dup' was done yesterday, 6/28. Sorry if I forgot any important info.
Ever since I switched from ubuntu 10.04 to 11.04 I am having problems with playing videos.
I keep getting low frame rates while playing avi and mkv video files. I have tried messing around with the vsync option in compiz and the Catalyst control center but all to no avail.
I have read there are more ATI users with this problem. Is there a way to fix this?
I have a nvidia 330m card with the proprietary driver and am currently on ubuntu 10.10Every time i play a video via hdmi, I get frame tearing on my tv and no sound. I used to get frame tearing on the primary display of my laptop as well but it stopped when I switched to metacity but it still didn't help with the hdmi output. And when I go to alsamixer, the nvidia card displayed there is different than what I have (It says GT220).
View 6 Replies View Relatedany way that will improve? it is a lifecam vx-6000
View 7 Replies View RelatedI am getting frame tearing on my tv when I play videos using mplayer. I get no tearing when I play it on my primary monitor. I didnt have this problem with 11.2
I am using a nvidia 9500gt, I have a crt monitor and my hdtv hooked up to it. The tv is connected by hdmi. I am running 11.3 with nvidia driver from the site,and kde 4.4.93. Also it should be noted that the tearing happened as well in kde 4.4.4 that was default. Disabling compositing makes no difference. In nvidia setting opengl is set to sync to vblank, and x server xvideo settings is set to sync to the tv (although it wont save that setting) and still with the tearing.
my xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.35 (buildmeister@builder97.nvidia.com) Wed Jun 16 19:14:45 PDT 2010
[Code].....
11.04 x86
4Gb RAM
Dual 2.8 AMD
ATI x1650 radeon (512mb)
I've been struggling with this for months now and I've tried some many things, I've forgotten half of them!
Basically, 11.04 picks up my card fine using the open xorg driver. I've got compize desktop effects (wobbly windows) but I can't play any HD video as it stutters and is completely unwatchable.
So to do any video editing, I have to boot into my Windows 7 install where the performance is considerably better.
Now then, I once managed to get a glxgears frame rate of 11,000 before I broke my install and had to re-install. Now I can't get above 300fps
rb@ub:~/Desktop$ glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate.
302 frames in 5.0 seconds = 60.258 FPS
301 frames in 5.0 seconds = 60.023 FPS
301 frames in 5.0 seconds = 60.019 FPS
301 frames in 5.0 seconds = 60.022 FPS
I bought an asus U33JC and except for one major issue (frame tear) it works fine out of the box using 11.04 64bit, with some minor issues easily solved (suspend, upside down cam on skype, flash and java). The U33JC has optimus, but also a bios option to disable the Intel GMA. So I could use the on chip Intel GMA or disable it and use the discrete GF310M.
The major issue I have now is poor video playback. Frame tear occurs in every single configuration I tried: Either using the internal Intel GMA, or disabling the Intel via bios option and using the NVidia proprietary drivers or even using bumblebee. This frame tear occurs also on the desktop, but the real problem is that it's very noticeable on video, specially when connecting my HD TV via HDMI. I tested 720p h264 mkv videos and even low res xvid avis in totem and mplayer/Smplayer all equally poor. Using mplayer I tried several vo options, such as xv (intel? xv) and x11, and playback is poor on all of them. Oh, and I don't use compiz (don't care for it). Refresh rate is 60Hz, and should be the right one. It works fine with vlc on the soon to be transformed into free space windows7, but that's not an option for me. I used Ubuntu before on a laptop, but I usually use Gentoo, so I'm not familiar with the ubuntu distro.
The purpose of this laptop was to be my "tv media center" when at home and my work laptop for travelling (13 inch ! ). But it failed miserably on the first count. I'm still using my old celeron based Gentoo laptop with RGB out to my tv for that, still with much better results (it can decode only up to 720p, which is fine). But it is dying! I really don't understand why playback is so poor. Could messing with xconf be the answer?
EDIT: Here's my xorg log. NO VSYNC? Is this right? Please help.
Code:
[ 20.743]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 20.743] X Protocol Version 11, Revision 0
code....
is there anyway to automatically disable screen saver whenever I watch video in full screen?
View 1 Replies View RelatedI want to watch a certain video on [url]...., but I get an error message instead. Some videos can be played, so I'm thinking it's a form of restriction, but I can't be sure.I tried using a few proxies, but on some the error message persists and on others the video doesn't load. I'm running Ubuntu 9.10 and Firefox 3.5.8.
View 2 Replies View RelatedI have two seperated video clips, that captured same event from two cameras. i would like to create one clip, that will show one on the left side, the second on the right side, and play together.
View 8 Replies View RelatedWhen I play large HD videos in mplayer, the video and sound frequently get out of sync, and the video plays a little strangely (occasionally speeding up and occasionally slowing down).
I think it's because mplayer is only running on a single core. As I've got a quad-core processor, it seems inefficient. I've seen that there is theoretically a way to get mplayer to work with multicore setups, but it requires compiling with different options. That'd take me a little while to work through.
Ideally there would be a pre-compiled version in the software centre, or a player which has support built in (again, ideally in the software centre). Is there such a thing available?
is this possible? Or does one have to use the binary blobs?
View 1 Replies View RelatedI have a video file in which the audio runs faster than the video, so they quickly go out of sync. The way to fix it would be to separate the audio and video streams, speed up the video (the audio is FINE, it's the video that's wrong), and then recombining them. What is the easiest way for doing that?
View 7 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
this happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies View Relatedthe movie i downloaded plays for only 19 sec and stops saying you will be redirected to microsoft download page. the file is 700 Mb. i installed w32 codecs after searching through many threads but still my vlc doesnt play the file.
View 1 Replies View Related