Fn + brightness-rightness+ = shows notification about brightness status (50%), but does not control the intensity of backlight. it's just stuck on 50% and that's all.
Ubuntu 10.04 x64,
notebook vaio vgn-nw21mf.
I'm running 9.10 and I've being using skype for months with no issues, but today my microphone isn't working. I've tested the physical microphone on another machine and it works fine. I've tried skype, sound recorder and neither gets any input. I also have webcam and the microphone on that isn't working either.
View 2 Replies View RelatedI can't seem to have VLC, RhythmBox, Audacious or Movieplayer to work on my Ubuntu 10.04 Am using a HP laptop dv5 Pavilion.
View 1 Replies View RelatedI am using a MSI GX630 Laptop with Xubuntu 11.04 installed. I am attempting to use a logitech H230 headset (here) which works fine on other computers running windows but is now not working in Xubuntu.
when plugged in, the headphone work, but skype does not record any sound from the microphone.
I am happy to provide any additional information I can, hopefully someone can help me.
I am studying abroad in Sweden and need my microphone working to speak with my family in the states. I also have an internal microphone which is does not seem to be working (thread here)
After upgrading to Mythbuntu 10.10 from 9.10 (clean install) on my combined front/backend I cannot get monitor (Dell 3007) to switch off from remote, I have been using simple script to DPMS force off for years with no problems, it still works, but some random time later the backlight comes back on. I have tryed the more complex scripts that stop and start the frontend and all of the acpi_osi options. Disabling screensaver has no effect. what causes this, or how to fix? Sysem is Abit IP35e (I suspect this board is the problem)
[Code]...
I have 2 remote frontends both upgraded OK. I have tryed installing 10.10 on a 'scrap' P4 machine, DPMS off works fine on it. I would try another install and/or another MoBo but its the only TV system in the house now.
unning 11.2 on laptop used as stationary desktop. Normally, the backlight turns off after several minutes of inactivity from keyboard/mouse. However, once video played using VLC, the screen simply blanks while backlight stays on, until system restart. Using Totem does not have this effect, but I like VLC.
View 3 Replies View RelatedI have a note HP Pavilion 15-p171nr with Deban Wheezy installed
used X = Gnome (gdm3) in classic view
Hardware:
Code: Select allyaroslav@hpnote:~$ lspci -k | grep -E "VGA|3D"
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
0a:00.0 3D controller: NVIDIA Corporation Device 1341 (rev a2)
yaroslav@hpnote:~$
[Code] .....
The problem: backlight is in maximum state and I can not change it.
There are a tons of advices like this:
1 - Open terminal (as a superuser) and type: gksudo gedit /etc/default/grub
2 - In the text file that opens, find the line which says GRUB_CMDLINE_LINUX="" and, inbetween the "", insert the words "acpi_backlight=vendor" (the line will be as follows: GRUB_CMDLINE_LINUX="acpi_backlight=vendor"), save and close the file.
3 - Back again in the terminal session, type: sudo update-grub
4 - Reboot.
It does not work...
Okay, I'm new to Kubuntu - but not Ubuntu. I installed Kubuntu about 2 hours ago, and I'm stuck... When I run the Firefox installer, it says the package is already installed, but where? I'm using Konqueror right now, but I want to use Firefox.
View 8 Replies View RelatedI am using Ktorrent 3.3.4 (compiled - using KDE 4.3.2) on Ubuntu version 9.10 (Ubuntu 2.6.31-19-generic)
I have tested the shutdown plugin to shutdown when all torrents stop downloading and also tested by selecting when events below happen and manually selecting the torrents.
I have the shutdown button selected.
However on both occasions my PC does not shutdown after the downloads have completed.
What am I doing wrong? Or is it because I am on Ubuntu and using the Gnome desktop and this only works for KDE?
Have strange problem when I get asked for my password in the terminal, the keyboard stops working, below is a sample of the terminal window.peter@peter-desktop:~$ sudo ufw status[sudo] password for peter:When I press the keyboard nothing happens.
View 2 Replies View RelatedMy TRENDnet TEW 424UB Wireless Adapter does not show up in the network window. The light does work while using Ubuntu but it goes on during Windows. How do I fix this?
View 6 Replies View RelatedI upgraded to Maverick Meerkat on my Compaq Presario CQ60 and the installation bugged killing all the documents and settings. I'm not a total n00by to Linux as I've been using it for years, but neither am I an advanced user.
Any halp you can give with this as I've tried everything I can think of to get the wireless card to work. Which basically boils down to trawling Google for the drivers and attempting to install them. code...
When using nano in the terminal, I can't seem to navigate text using the arrow keys - everything I have read about nano says I should be able to do this.
My Ubuntu installation has no GUI, so I can't use the mouse for navigation.
The title says it all. I am using an Acer Aspire laptop that I upgraded from 10.10 to 11.04 today. There is no backlight. What's the fix?
View 9 Replies View RelatedIt's been a few hours since the Adobe Flash plugin on my Firefox is behaving in a strange way: some of the clickable dialogs do not work anymore. I click on them but nothing happens.
For example: in chatroulette, the dialog that asks for the permission to use the webcam can't be clicked:
Same happens for other flash sites.
I'm using Firefox "Namoroka" v3.6.5pre and Flash 10.0r45
Just bought this toshiba laptop m645-s4114 today @ bestbuy and I installed the ubuntu 11.04 successfully erasing the MS OS on it but later realized my wireless network doesn't work. I have tried and followed everything that was given on some linux ubuntu forums with no avail.
View 9 Replies View RelatedI have Fedora 12 and Windows 7 in a dual boot configuration in my lenovo laptop.The config of my laptop is core2duo 1.73, 3gb ram and 160gb hdd.I updated my fedora 12 yesterday. But after that internet stopped working. But I'm able to ping google.com successfully.Internet is working properly in my windows. I have posted this message from the same ethernet connection in my windows.I have posted the output when pinging google.com down here. code...
View 3 Replies View RelatedWireless not working on opensuse11.0 brother gave me dvd with 11.0 can't get wireless working
View 3 Replies View Relatedive installed ubuntu 10.4 beta on a toshiba a505-s6015 intell i5 processor and intel integrated graphics.it worked fine then the backlight went off.well i restarted it a couple of times and it wouldnt come back on.how do i fix this problem?
View 2 Replies View RelatedHaving some memory loss i think (in my head not my pc). I have set up apache before , then changed to dsl in the last week and cant seem to get this new modem/router to work. i can get the loopback address to work, as well as the network ip. can NOT get my other machines to hit the server on the network .
also no connection from outside the network from port 80. my modem is a motorola (att) ,apache2 on my toshiba laptop, amd x2, 3gigs ram.
I am using Scientific Linux version 2.6.9-67.EL.cernsmp (root@lxcert-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Wed Nov 21 16:22:33 CET 2007. Here in mozilla seamonkey browser face book is not working well. I can not write any thing on the wall. But in firefox its working fine but the the browser is a bit slow.What should be the problem in seamonkey ? can anybody tell me ?
View 1 Replies View RelatedOriginally after an installation of openSUSE 11.4, I had no internet connection at all, even when connecting with ethernet cable. But then I tried switching back to YaST and then back to Network Manager, and restarted a couple times, and now I have internet connection. DNS is also working, for Ping. The problem is that firefox does not use DNS and cannot resolve host names. I can use Firefox with IP numbers.
View 3 Replies View RelatedI am dual-booting Karmic/OS X. I have a MacBook Pro 5,1. When using the keyboard to change the backlight, the graphic in the top left does move to indicate a higher brightness (albeit, it moves extremely slowly).
I, of course, have all the necessary drivers installed.
I have all the packages I needed from the Mactel repository. This has been a problem within Karmic since I've put it on my MBP. There have been several updates from the Mactel repository concerning the Nvidia backlight package (I don't remember exactly what that package is called though). I hope each time that it will fix what is going on, but obviously, it hasn't.
Is there any program that I could use to otherwise change the backlight? When I'm sitting outside it's really difficult to see what's on my screen as it also doesn't automatically respond to the change in environmental brightness by making the screen brighter.
I have an Asus P50IJ-X2 and in lucid the backlight cannot be adjusted. The panel app doesnt work, when I click on it and try to adjust the slider it just disappears. When I reopen it the slider is at the top left corner of the screen.
The function keys seem to be detected alright, but when I press them I get the notification that the brightness is going down but nothing happens. Also after the first press the notification gets extremely laggy. If I press the brightness keys again it takes 30 seconds or more for the notification to show up. Also after the first press my volume function keys have the same behaviour in the notification area as the function keys.
Also messing with the controls in the power settings doesn't do anything. The strange thing is all of this worked perfectly in Karmic. The function keys, auto dimming, everything just worked out of the box. I have no idea where to start trouble shooting this so can anyone give me some direction?
Just upgraded to 10.04. Everything seems to still work on my Macbook, with a bonus being the buttons to modify the keyboard backlight brightness seem to work now.
However, the only caveat is that I can't seem to turn off the backlight. Pressing the dim button all the way to off just seems to reset to full brightness. Even if I set the brightness to 1 (almost off), the backlight seems to reset itself to full brightness at seemingly random times.
Running this command used to turn it off, but now doesn't work:
Code:
echo 0 | sudo tee -a /sys/class/leds/smc::kbd_backlight/brightness
Is this a bug? How do I turn off the keyboard backlight?
I am doing a project that involves dimming monitor backlight and Im in the process of searching a PC to be used for the project.
I ran ubuntu live cd in a PC shop to see if I can use the ff command: echo 30 > /proc/acpi/video/xxx/xxx/brightness
However, all brightness files just contain <not supported>. Is there another way to adjust the brightness (not using buttons)?
Since the monitor is dimming when idle (through built in power management), is it safe to assume that there is a way to do this?
I already need to confirm if we would order the PC. PC is Asus ET1610PT (all-in-one PC, touchscreen monitor)
I've finished integrating proper keyboard backlight support into gnome-power-manager (which in turn uses upower to actually control the keyboard backlight) which with any luck will be available in Natty out of the box. A similar patch should also land upstream too so Fedora etc should get it for free too in their next release too. In essence this allows us to provide the user with greater feedback and control than say just using pommed (ie. we can dim the keyboard on idle like the lcd display etc, and can display nice notifications of the keyboard backlight level too - see attached screenshot).
View 9 Replies View RelatedDebian Lenny on a Toshiba Portege 350000:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev 82)kernel version 2.6.26-2-686On my system, "xset dpms force off" blanks the screen, but does not turn off the backlight. This means that the automated screen off in X does not actually save any power when it blanks the screen.I can turn off the backlight manually using the BIOS tool "vbetool dpms off" (but then I have to turn it back on again manually too).Question 1: is this a problem with the graphics driver interface, or with X, or with the power management driver interface?Question 2: as a workaround, is there any way for me to hook into the dpms off/on that X is doing, and run a script to call vbetool? The best workaround hack I have come across so far is to have a screensaver that calls vbetool, but I was hoping to find something that doesn't require me to run a daemon all the time.
View 4 Replies View RelatedI have been given the task of installing CentOS 5.5 on some new Fujitsu Siemens S710 laptops and have the following problem. The OS seems to install without any issues but when it starts up you can see the login prompt just as the backlight is off on the laptop screen. If you were to plug in an external monitor it will work fine and the screen is perfect. The only thing I can think of is if the video drivers need to be updated but I can't seem to fine any Linux ones. It seems to use the Intel mobile HD graphics chipset.
View 2 Replies View RelatedI just installed helena on my compaq presario cq61-223sa but i can't get the altec Lansing speakers to work and my internal mic as well. I'm fairly new at linux and have tried looking for drivers but i couldn't find any.
View 4 Replies View Related