I have added a couple of clips (1080p50 XVid) to a project, and each of them play fine in the Clip Monitor. I want to add these clips to the timeline and add the Dissolve transition between them.
I have achieved the above and when I click on the Play button on the Project Monitor, I can see the project playing including the transition. All fine so far.
After this first play of my new project, I have tried to move the playback position bar and once I do so, the project monitor goes black. From this point on, I cannot see my project playing whether I start playback from the beginning or from an arbitrary mid-point. I may see a flicker of an image, and the transition effect may appear but that is it until I quit Kdenlive and start again.
I'm stumped as to what could cause this. I did wonder if it was because I was using onboard graphics, but I have upgraded that element of the computer today with no change in the result.
I know the machine doesn't have the highest specification in the world, and perhaps more RAM is needed for this job. I don't believe this to be the causing factor in this problem though considering playback is initially achieved.
Following a search of the internet, I've attempted two possible ways of resolving this: disabling Compiz, starting Kdenlive from the terminal using 'env XLIB_SKIP_ARGB_VISUALS=1 kdenlive' and running the Config Wizard. Neither has given the resolution.
I'm currently on vacation, and noted that the kdenlive version on my laptop (running 64-bit openSUSE-11.3 with KDE-4.4.4) will crash when loading a kdenlive file that has an audio track previously saved.
ie one can no longer reload a project, after saving it, if one has an audio track in the project.
I note my desktop (just before I went on vacation) did not have this behaviour. Has anyone else encountered this?
When I get back from vacation, I'll compare the packages between the two (ie between laptop and desktop). I note these packages on my laptop, which may or may not be relevant.
I have a query about Kdenlive, when putting avi. Files with audio files like wma. It chugs hard and doesn't play out a smooth rendition of the two. I only went to Ubuntu because I thought windows movie maker was a joke in regards to its freezes. I have tryed a few other video editing apps but as far as I can see Kdenlive has all the basics I need except the smooth file use. I suppose would be: does my 2gb RAM and 64 AMD 4000+ fit a video editing standard? What is the best video editing software out there on ubuntu?
I'm on kubuntu 10.10 and kdenlive 0.7.8 and since the upgrade to 10.10 Kdenlive crashes whenever I import a clip with a segfault.
Here's the dump from console: File given: true Color mode changed to 0 File given: true QWidget::insertAction: Attempt to insert null action QWidget::insertAction: Attempt to insert null action Bus:pen: Can not get ibus-daemon's address. IBusInputContext::createInputContext: no connection to ibus-daemon [dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate [dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate [dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate [dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate [dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate [dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate Diverting av_*_packet function calls to libavcodec. Recompile to improve performance Last message repeated 1 times swScaler: pal8 is not supported as output pixel format KCrash: Application 'kdenlive' crashing... KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit sock_file=/home/jason/.kde/socket-denpc/kdeinit4__0 QSocketNotifier: Invalid socket 11 and type 'Read', disabling... [1]+ Stopped kdenlive
i did installed kdenlive 0.7.8 works FINE beautifull but list of effects are low..opensuse installed:kdenlive 0.7.8kdenlive-lang 0.7.8but my other pc installed kubuntu and install kdenlive 0.7.8 work FINE same beautifull but list of effects are many...maybe opensuse is missing package "kdenlive-data" because kubuntu there is package kdenlive-data and there isnot from opensuse...why?kdenlive-data is a extra data for effects exports video, ect ect..
I have reinstalled karmic 64 bit and am having major problems with kdenlive crashing,again(main reason for my reinstall).It crashes upon openning and I need it,yesterday. it also says This crash information is not useful p, li { white-space: pre-wrap; } Application:Kdenlive (kdenlive), signal: Segmentation fault I've removed it and reinstalled several times same goes for recordmydesktop too!
I have followed a few guides on using video overlays to obtain a watermark. i am suppose to use the Bluescreen video effect along with the composite transition in kdenlive.
I run the following versions of software: lucid lynx 10.04 FFMPEG compiled from svn x264 compiled from git Kdenlive 7.7.1 Kino 1.3.4 melt 0.5.6 from a PPA Medibuntu repos
My video I want the watermark over is a kino captured file which is dv avi type 2 (open dml).I have done Bluescreen video effect along with the composite transition but the video clip which the video watermark plays on top of ends up getting darker. for the bluescreen color i have chosen red which is the closest red i could pick next to the spinning logo. the lighting changes on it and gives it an undesirable effect as far as how dark it it. i tried other colors but then the logo either disappears or the spinning logos black video background covers up my video. the reason for my "video" watermark is because it is a spinning logo (not a picture) which can be obtained in .mp4 format here:[url]
My goal is to put that on top of some xbox 360 modern warfare 2 gameplay. i haven't uploaded an example of how dark it makes the footage look yet but it does.
Another hair-pulling WTF moment... All I wanted to do is add a title to the start of a screencast, nice words overlaying the screen vid. In kdenlive:
1. Project menu > Add title clip 2. Format text etc. 3. Set the title clip's background opacity to 0 = (should be?) fully transparent. 4. Put the clip on the timeline, on a higher track than the screen vid. 5. kdenlive obliterates the screen and displays the text with a black background.
There has got to be an easy way to do this. kdenlive.org documentation seems outdated (their screenshots look different from the version I got from synaptic). Do I really have to make the title in GIMP like some webpages say? I can do it, but that's idiotic. kden should be able to do it.
I just wanted to install Kdenlive and I added the requested repositories. The one called "packman" included unsigned files that were labelled "untrusted" by the installer. Is it still safe to install it? What's your opinion?
I've been trying to get kdenlive to work properly the last couple of days. But I'm missing some codecs. Some Ubuntu users said that installing the ubuntu-restricted-extras did the trick for them.
Does anyone else get this when they start up the Software Manager?VLC works fine but I would like to resolve this issue. I haven't wanted to fix it until last night when I started to install kdenlive.
I have a Dell latitude D400 , with ubuntu 11.04 on it. Running quite nice. I have a jvc gr20 mini dv camcorder, and i'm trying to firewire my footage across. Now , it has trouble instailising, but can control my camcorder from Kdenlive i.e pause, play etc. When I try recording it plays the camcorder but does not record. Also does not show the camcorder feed on the laptop.
I have to disconnect the camcorder in order to get anything to work, and it the tells me that Capture crashed. Check parameters.
Yesterday I spent a good couple of hours putting together a video. When I shut down, Lives flushed my entire project because it uses a tmp working directory and places it as default in tmp.Today, I changed the working directory to Video, thinking this would be safe. Instead, the programme quit half-way through editing and I have now lost another good couple of hours.is there any way of saving my project?I can still see the .lay file but there doesn't seem to be any way of opening it.
Whenever I try to perform a gesture with easystroke, black blocks take up a large area of the screen, making it so that I cant see anything underneath them until I stop performing the gesture. It didn't used to be like this, before the gesture would perform mostly flawlessly. I don't know what I did to cause it to start malfunctioning, but I would really like it to stop.
i recently installed ubuntu on a single-core amd 64 with an ati radeon 9100. my desktop is malfunctioning: specifically, when i close a program the program still shows in the task bar below.
i can only see two workspaces in the workspace view.when i use evolution mail i cannot get the cursor to show in the textboxes, nor does it type. i am using the radeon drivers that ubuntu selected for me upon installation. aside from installing chrome and the plug-ins firefox said it needed to view videos, i have not done anything to my installation.
I'm new to Debian, and there's something I don't understand about the packages marked as automatically installed. They are supposed to be removed by "apt-get autoremove" if no other packages depend on them, right? Well, I've installed xserver-xorg-video-ati which pulled *video-radeon, *video-r128 and *video-mach64. I later realised that I only needed *video-radeon, and got rid of xserver-xorg-video-ati and the other two. The thing is... xserver-xorg-video-radeon is still there, even if only xserver-xorg-video-ati and xserver-xorg-video-radeon-dbg depend on it, and neither are installed in my system.
I'm working on a digital signage project for my burning man camp.My display needs to cycle, on a timer, among various pieces of content, including:
* images * video * flash content * information screens (vanilla xhtml)
Ideally, it would also have a generic xml/rpc interface for easily updating information screens via iphone/android. I'm contemplating whipping something up in jquery to run in a fullscreen browser, but have a feeling I might be reinventing the wheel.
Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
I don't know whether this should be filed under hardware or laptop, but my wireless mouse is acting sluggish. At first I thought that it was because I chose LXDE as my gui and maybe its pointer was just inherently bad or something, and began to regret my decision. However, upon trying the laptop's built-in touchpad, I found it to be smooth as butter. So, the problem is with the mouse. The mouse worked fine on Windows, so the problem is with the interface between OS and mouse.
Would the problem be fixed by installing a different Desktop Environment? Or is it something else? Is there a better driver I can download or something?One last thing of note: the mouse settings utility is severely malfunctioning. I change the sensitivity and hit OK, but when I check it again, the mouse sensitivity is reset.
Anyone else notice this. You can't increase the view area for the lower section where the project islisted.I could also only burn one data dvd. It wouldn't see the next blank dvd. I had to shut k3b and start again.reported to packman and packager
i study computational systems engineering.. and in my school (itlp) we've got fedora 12 installed in some of the computers.. and we use it to learn network administration and security. the reason of this message.. is that i want to install fedora 12 in my notebook (dv4-1525la vu068la).. but an error keeps poping up.. the error is the next one..
DMAR: No ATSR found DRDH: handling fault status reg f0003d63 Kernel panic - not syncing: DMAR hardware is malfunctioning
and though i have looked in bugzilla.. there is no help for me there.. they say.. "press tab in the welcome bootscreen when you are about to select whether to install or restore an existing system and write intel_iommu=off and press enter" but that does not really helps.. it just does the same.. in some blogs they say "upgrade your bios".. but i say.. then why i can not install the olders distributions with my "old" bios.
how to install Kdenlive 0.7.6? I've extracted it from tar.bz2 to my desktop.how to install through the terminal, I also need step by step instructions as I don't know the commands for the terminal.
I'm running F13 with everything up to date. I've installed Kdenlive thru yum as my video editor, and everything works fine, except that there is no icons on any of the widgets in the application. And yes, I've checked that 'text alongside icons' is set in the menus. It's like the kde icons haven't been installed.Here's what is installed, from 'yum list *kde*':
I've recently got a problem. I've installed projectM, the pulse audio version. It worked fine until a couple of days. I noticed, that the visualization isn't synchron with the music. Then I opened pulse audio to check the volume controls. The blue bars showing the intensity of the loudness don't move at all, it's all gray. ProjectM can't analyze the music and therefor cannot visualize correctly.
I have an issue with Skype video similar to this thread [URL] where the test video doesn't work and I only see a white screen from my own webcam. The receivers can see my video and I can see their video, however. Video from my webcam works fine in Cheese and Guvcview. It seemed to start after I loaded the Compiz-config-settings-manager in an effort to fix video tearing (didn't work). Also Kdenlive now crashes every time I try to run a clip, but it was working great before. Even if I remove CompizConfig I still have the problem.
