Having upgraded to from 11.3 to 11.4 I now am unable to render in KDENLIVE. I've installed MLT, FFMPEG and KDELIVE with dependencies from Packman.
What is different from my 11.3 install is MLT has moved up a notch. 0.5.10 to 0.6.2. Does 0.6.2 work with KDENLIVE 0.7.8? I would think it should.
I have see MLT 0.7.0 is released but will wait for the RPM to be released on Packman.
This is the message taken from terminal.
[Code].....
I am working for a small company editing video's with kdenlive
After updating my system to opensuse 11.3 and upgrading kdenlive to 0.7.8 I am unable to open my previous project files without kdenlive crashing.
I am using kdenlive 0.7.8-1.pm.1.1-x86-64 from packman 11.3 and my kdebase library is 4.4.4..1-5 from opensuse.
This is the output from calling kdenlive when it crashes.
Is this an issue with kdenlive or is it an issue with my system configuration. I am using premiere as a backup, but I much prefer kdenlive ...
video@linux-z616:~> kdenlive
File given: true
Color mode changed to 0
File given: true
[Code].....
i did installed kdenlive 0.7.8 works FINE beautifull but list of effects are low..opensuse installed:kdenlive 0.7.8kdenlive-lang 0.7.8but my other pc installed kubuntu and install kdenlive 0.7.8 work FINE same beautifull but list of effects are many...maybe opensuse is missing package "kdenlive-data" because kubuntu there is package kdenlive-data and there isnot from opensuse...why?kdenlive-data is a extra data for effects exports video, ect ect..
View 9 Replies View RelatedMy Camcorder produces 1080i 50fps. Via handbreak I converted the clips to 1080p 25 fps. (de-interlace) using h264 codec.
These converted clips work very well with Kdenlive. All effects are working and the render results(mp4 max bitrate) are equal to the original.
Openshot is less sophisticated and in my opinion less intuitive.
I just wanted to install Kdenlive and I added the requested repositories. The one called "packman" included unsigned files that were labelled "untrusted" by the installer. Is it still safe to install it? What's your opinion?
View 1 Replies View RelatedI downloaded an FLV video and placed an extra MP3 file over it. Two files. Total: 30 MBI experimented with about seven rendering containers, and QuickTime renderer was the only rendering container that didn't result in sped-up/compressed video or correct rendering for just fifteen seconds.How in the name of all that is holy did this rendering end up with 570 extra MB?
View 2 Replies View RelatedDoes anyone else get this when they start up the Software Manager?VLC works fine but I would like to resolve this issue. I haven't wanted to fix it until last night when I started to install kdenlive.
View 8 Replies View RelatedI'm currently on vacation, and noted that the kdenlive version on my laptop (running 64-bit openSUSE-11.3 with KDE-4.4.4) will crash when loading a kdenlive file that has an audio track previously saved.
ie one can no longer reload a project, after saving it, if one has an audio track in the project.
I note my desktop (just before I went on vacation) did not have this behaviour. Has anyone else encountered this?
When I get back from vacation, I'll compare the packages between the two (ie between laptop and desktop). I note these packages on my laptop, which may or may not be relevant.
Code:
kde4-kdenlive-0.7.7.1-1.pm.2.1.x86_64
libmlt++3-0.5.6-1.pm.1.16.x86_64
python-mlt-0.5.6-1.pm.1.16.x86_64
libmlt2-0.5.6-1.pm.1.16.x86_64
mlt-0.5.6-1.pm.1.16.x86_64
sox-14.3.1-1.11.x86_64
ladspa-1.13-3.8.x86_64
I recently downloaded Frets On Fire and the HRP Polymer pack for Duke3D...Duke3D runs fine with just EDuke32 and no mods, just Duke3D and EDuke32. But when I try the HRP Polymer pack, it says in Terminal "NVIDIA: Direct Rendering failed, attempting indirect rendering." This is fine...if I want the game to lag like hell, I'm sure my video card and the driver for it support DR, the video card is a NVIDIA Geforce FX 5200, the same message appears in terminal when I run Frets On Fire, I think it does with other games too, if someone could explain how to enable Direct Rendering.
View 5 Replies View RelatedHi! I configured subpixel rendering in GTK and it works, but it seems there is a difference in font appearance in GTK and Qt applications.
The fonts in GTK seem thinner, more sharp and aliased while in Qt they are more fat and smooth. This is with the same font name and size.
I also found that the same behavior appears in Fedora, but in Ubuntu all fonts appear similar in both GTK and Qt (fat and smooth as in Qt in SUSE).
So my question is how to make GTK fonts to appear as in Ubuntu.
In the next couple of days I'm intending to move to openSuse after a year of vacillating between XP, Vista, 7 and Ubuntu/Mint. One of my main uses for a computer is word processing, but I've noticed font rendering is not at its best in much of Linux. Ubuntu made a great leap as of 9.04, and therefore so did Mint, but whatever was done with the configuration, despite the free and open source factor, hasn't been implemented in many other distros, including I think openSuse. Even Kubuntu is behind - the settings don't seem to alter no matter what is picked in the relevant configuration panel. Several versions of KDE 4 have come and gone without this being seen to.
I am going by live CDs, for example I have 11.2 KDE version which I tried again today and found the same mysterious lack of change as occurs with Kubuntu when the settings are altered. So, has this since been put right with an update or user's tweak, or do people not even know or notice what I'm meaning? Using Open Office's word processor, the fonts aren't correct, often too skinny or spidery, which is what made me hesitant about Linux when I first dipped in, with Ubuntu 8.10.
I've tried the last four openSuse Gnome editions, and with the 'slight' settings for lcd screens the colour fringing is very apparent, as with Ubuntu 8.04 and 8.10. The 'medium' and 'full' settings cause fonts, Roman type especially, to become skinny and spidery.
I have been noticing that openSUSE and many other Linux distributions are not rendering fonts as the way they should be. The fonts are rather fuzzy. I wish it was lot a crispier as like in Windows or Mac. Is there any solution to that?
View 8 Replies View RelatedI'm trying to achieve in Ubuntu the same fonts rendering like in openSUSE, which has the best configuration. [ubuntu] Font rendering on some websites.. - Ubuntu Forums. Also Fedora has the same problem like Ubuntu. Fonts are too wide and big, but only on some websites. How to reconfigure fonts to have proper size?
View 9 Replies View RelatedI recently installed openSUSE 11.4 on my computer and laptop (both 64bit via dvd, one has AMD CPU and nVidia gpu, the other has intel cpu and graphics card). The problem is that when I move my mouse on close and minimize and maximize buttons of windows sometimes they aren't rendered correctly, and KDE menues aren't rendered correctly either, they mix with the background somehow. the menu problem goes away if I change the theme to plastik, but the window problem remains, here are links to some picture of what goes wrong in my system:
request download ticket | ifile.it
request download ticket | ifile.it
request download ticket | ifile.it
btw sorry that I uploaded them in ifile.it server, the other picture upload site like tinypic are blocked in my country
PS: Enabling or disabling desktop effects has no effect on the problem.
I installed the latest ATI driver (10.1), but direct rendering doesn't work :
Code:
ben@linux-wbq1:/etc/X11> glxinfo
name of display: :1.0
libGL error: open DRM failed (Operation not permitted)
libGL error: reverting to (slow) indirect rendering
[Code].....
So I installed this old card on my office computer yesterdey, and i ran SaX2 (sax2 -r) just as I should, but direct rendering is not enabled, is there anything I should do?
I'm using opensuse 11.2
Code:
Code:
*** WARNING: Direct Rendering is NOT enabled ***
I'm running F13 with everything up to date. I've installed Kdenlive thru yum as my video editor, and everything works fine, except that there is no icons on any of the widgets in the application. And yes, I've checked that 'text alongside icons' is set in the menus. It's like the kde icons haven't been installed.Here's what is installed, from 'yum list *kde*':
fedora-kde-icon-theme.noarch 0.0.2-2.fc13 @fedora
kde-filesystem.noarch 4-35.fc13 @fedora
kde-settings.noarch 4.4-16.fc13 @fedora
[code]....
When I run OpenSUSE from the Live CD using normal settings, booting stops with a blank screen a moment after the kernel is loaded. When running it with ACPI disabled, it works, but direct rendering is disabled, even though it detects my video card (Mobility Radeon HD 5650) correctly Here's the Xorg.0.log file: my xorg log - [URL]
View 3 Replies View RelatedI have jessie and i have installed kdenlive 0.9.10-2, and it crashes at startup. I try to get a debug trace:
(gdb) run
Starting program: /usr/bin/kdenlive
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__strcmp_sse2_unaligned () at ../sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S:29
29../sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S: No existe el fichero o el directorio.
(gdb) bt
[CODE]
how to install Kdenlive 0.7.6? I've extracted it from tar.bz2 to my desktop.how to install through the terminal, I also need step by step instructions as I don't know the commands for the terminal.
View 3 Replies View RelatedUbuntu + Unity = bad, so I installed Fedora 15 with Gnome 3. I am very happy with it! The only thing that bothers me at this point, is the fact that Kdenlive keeps crashing when opening MOD-files. This is the error I'm getting:
Code:
Application: Kdenlive (kdenlive), signal: Segmentation fault
[Current thread is 1 (Thread 0x7fb895918840 (LWP 3921))]
Thread 4 (Thread 0x7fb88e670700 (LWP 3923)):
#0 0x0000003f6f0d74f3 in poll () from /lib64/libc.so.6
#1 0x0000003f71042d24 in ?? () from /lib64/libglib-2.0.so.0
#2 0x0000003f7104360d in g_main_loop_run () from /lib64/libglib-2.0.so.0
#3 0x00007fb88eb99564 in ?? () from /lib64/libgio-2.0.so.0
#4 0x0000003f710683a6 in ?? () from /lib64/libglib-2.0.so.0
#5 0x0000003f6f407af1 in start_thread () from /lib64/libpthread.so.0
#6 0x0000003f6f0dfddd in clone () from /lib64/libc.so.6 .....
I tried playing MOD-files with mlt, but that failed also completely. At this point, I don't know what to do.
I have a query about Kdenlive, when putting avi. Files with audio files like wma. It chugs hard and doesn't play out a smooth rendition of the two. I only went to Ubuntu because I thought windows movie maker was a joke in regards to its freezes. I have tryed a few other video editing apps but as far as I can see Kdenlive has all the basics I need except the smooth file use. I suppose would be: does my 2gb RAM and 64 AMD 4000+ fit a video editing standard? What is the best video editing software out there on ubuntu?
View 1 Replies View RelatedI recently updated from ubntu 10.10 to 11.04. (64bit). Now my Kdenlive stopped working.
Terminals says:
lars@ubuntu:~$ kdenlive
Qt: Session management error: None of the authentication protocols specified are supported
kdenlive: malloc.c:3096: sYSMALLOc: Assertion `(old_top == (((mbinptr) (((char *) &((av)->bins[((1) - 1) * 2])) - __builtin_offsetof (struct malloc_chunk, fd)))) && old_size == 0) || ((unsigned long) (old_size) >= (unsigned long)((((__builtin_offsetof (struct malloc_chunk, fd_nextsize))+((2 * (sizeof(size_t))) - 1)) & ~((2 * (sizeof(size_t))) - 1))) && ((old_top)->size & 0x1) && ((unsigned long)old_end & pagemask) == 0)' failed.
KCrash: Application 'kdenlive' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/lars/.kde/socket-ubuntu/kdeinit4__0
Warning: connect() failed: : No such file or directory
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi directly
Alarm clock
I have added a couple of clips (1080p50 XVid) to a project, and each of them play fine in the Clip Monitor. I want to add these clips to the timeline and add the Dissolve transition between them.
I have achieved the above and when I click on the Play button on the Project Monitor, I can see the project playing including the transition. All fine so far.
After this first play of my new project, I have tried to move the playback position bar and once I do so, the project monitor goes black. From this point on, I cannot see my project playing whether I start playback from the beginning or from an arbitrary mid-point. I may see a flicker of an image, and the transition effect may appear but that is it until I quit Kdenlive and start again.
I'm stumped as to what could cause this. I did wonder if it was because I was using onboard graphics, but I have upgraded that element of the computer today with no change in the result.
Computer specifications are as follows:
* Ubuntu 10.04LTS Lucid Lynx
* Intel E3200 Dual Core Celeron 2.4GHz
* 1GB DDR2 800MHz RAM
* MSI NVidia 8400GS 512MB Graphics Card
I know the machine doesn't have the highest specification in the world, and perhaps more RAM is needed for this job. I don't believe this to be the causing factor in this problem though considering playback is initially achieved.
Following a search of the internet, I've attempted two possible ways of resolving this: disabling Compiz, starting Kdenlive from the terminal using 'env XLIB_SKIP_ARGB_VISUALS=1 kdenlive' and running the Config Wizard. Neither has given the resolution.
I have an issue with Skype video similar to this thread [URL] where the test video doesn't work and I only see a white screen from my own webcam. The receivers can see my video and I can see their video, however. Video from my webcam works fine in Cheese and Guvcview. It seemed to start after I loaded the Compiz-config-settings-manager in an effort to fix video tearing (didn't work). Also Kdenlive now crashes every time I try to run a clip, but it was working great before. Even if I remove CompizConfig I still have the problem.
View 1 Replies View RelatedI'm on kubuntu 10.10 and kdenlive 0.7.8 and since the upgrade to 10.10 Kdenlive crashes whenever I import a clip with a segfault.
Here's the dump from console:
File given: true
Color mode changed to 0
File given: true
QWidget::insertAction: Attempt to insert null action
QWidget::insertAction: Attempt to insert null action
Bus:pen: Can not get ibus-daemon's address.
IBusInputContext::createInputContext: no connection to ibus-daemon
[dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate
Diverting av_*_packet function calls to libavcodec. Recompile to improve performance
Last message repeated 1 times
swScaler: pal8 is not supported as output pixel format
KCrash: Application 'kdenlive' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/jason/.kde/socket-denpc/kdeinit4__0
QSocketNotifier: Invalid socket 11 and type 'Read', disabling...
[1]+ Stopped kdenlive
I've been trying to get kdenlive to work properly the last couple of days. But I'm missing some codecs. Some Ubuntu users said that installing the ubuntu-restricted-extras did the trick for them.
View 14 Replies View RelatedRunning Slow and Pegging Processor When Using Mozilla and Kdenlive
View 1 Replies View RelatedI have reinstalled karmic 64 bit and am having major problems with kdenlive crashing,again(main reason for my reinstall).It crashes upon openning and I need it,yesterday. it also says This crash information is not useful p, li { white-space: pre-wrap; } Application:Kdenlive (kdenlive), signal: Segmentation fault I've removed it and reinstalled several times same goes for recordmydesktop too!
View 6 Replies View RelatedI have followed a few guides on using video overlays to obtain a watermark. i am suppose to use the Bluescreen video effect along with the composite transition in kdenlive.
I run the following versions of software:
lucid lynx 10.04
FFMPEG compiled from svn
x264 compiled from git
Kdenlive 7.7.1
Kino 1.3.4
melt 0.5.6 from a PPA
Medibuntu repos
My video I want the watermark over is a kino captured file which is dv avi type 2 (open dml).I have done Bluescreen video effect along with the composite transition but the video clip which the video watermark plays on top of ends up getting darker. for the bluescreen color i have chosen red which is the closest red i could pick next to the spinning logo. the lighting changes on it and gives it an undesirable effect as far as how dark it it. i tried other colors but then the logo either disappears or the spinning logos black video background covers up my video. the reason for my "video" watermark is because it is a spinning logo (not a picture) which can be obtained in .mp4 format here:[url]
My goal is to put that on top of some xbox 360 modern warfare 2 gameplay. i haven't uploaded an example of how dark it makes the footage look yet but it does.