Debian Multimedia :: Testing/Sid - Kdenlive - No Complete Codec Support ?
Feb 27, 2010
I've been trying to get kdenlive to work properly the last couple of days. But I'm missing some codecs. Some Ubuntu users said that installing the ubuntu-restricted-extras did the trick for them.
View 14 Replies
ADVERTISEMENT
Feb 19, 2015
Here's a plugin that lets VLC from wheezy-backports play h.265 content. I packaged it for the MEPIS 12 repo, but it should work on wheezy. [URL] ....
Or create your own packages against Debian's stock VLC 2.0.3, that might work.
You need to install the libde265 package first, then the plugin package.
You can use the static ffmpeg binaries from ffmpeg.org to encode to that h.265 (hevc) codec, but it will take quite a while.
Code: Select all./ffmpeg -i [inputfile] -vcodec hevc [outputfile] Try mp4 or mkv for the output file extension.
The good news is that it will create video of the same quality that is half the size of a comparable h.264 file. This is handy for putting movies on space-limited storage, such as on a phone or tablet. I do know that MX Player on Android can play h.265 video.
View 4 Replies
View Related
Jan 26, 2010
how I can use in my Kubuntu 9.10, audio codec - <voxware metasound audio codec>? P.S. Sorry for my bad english. I look forward to an answer,
View 7 Replies
View Related
Dec 7, 2015
[URL]So, I want to hear the state-owned Portuguese radio that plays Classical Music, called "Antena 2", by either (1) clicking its website's listening "popup" window - [URL]- or by (2) adding such radio to my Rhythmbox list.
And, I would like to hear such a radio without having to install the proprietary "Flash" plug-in... And, if I'm forced to install any proprietary plug-in, I would rather install some "gstreamer" package(?) instead. But, preferably, what I would like, would be to use a Free Software alternative, if possible.
But, in the meantime, this is what happens...
1. If I click the above-mentioned link, to the corresponding "popup" window ([URL]), I can't hear anything.
2. If I click on a link at the bottom of that same "popup" window, that says "Listen to the broadcast in Windows Media Player" - [URL] - I'm sent to an identical listening "popup" window/page, where I still can't hear anything - and whose difference is that, now, the link at the bottom of the page says "Listen to the broadcast in Flash" [URL]
That is, this radio's website presents me two alternatives. That are, to listen to it
(1) using the "Flash" technology ([URL]), or
(2) using some "Windows Media Player" technology/codec/format ([URL])
The first of which I would very much like to not have to install, and the second of which I suspect there might be some plug-in package for, that I can install, that will make it possible for me to hear this radio.
And, the reason I suspect the latter, is because, if I try to add the link to the "Windows Media Player" page ([URL]) to my Rhythmbox's list of radios, I get the error message: "Your GStreamer installation is missing a plug-in."
So, which package(s) do I have to install, to be able to listen to this radio on the web - or, even better, through my Rhythmbox list of radios?
View 14 Replies
View Related
Aug 1, 2010
This is what greeted me this morning. I think I'll leave it until after breakfast. Current status: 291 updates [+291], 3601 new [+1]. root@chaffinch:/home/eric# aptitude full-upgrade The following packages will be upgraded:
[Code]...
View 6 Replies
View Related
Mar 4, 2011
xfce 4.8 will be available in testing?
View 3 Replies
View Related
Sep 19, 2015
I am running fully updated stretch/sid with xfce. Xastir is installed from the repos. Imagemagick was installed during the system install.
I have tried using the OSM maps, but they do not display. When I start Xastir in a terminal i get the following:
Magick: No decode delegate for this image format ().
Could not allocate canvas to hold tiles.
View 4 Replies
View Related
Feb 1, 2016
I've just set up an alternative testing installation starting from Jessie and I've instantly noticed that the appearance of VLC can't be set via the qt4-qtconfig application (as I've done so far in Wheezy and Jessie), in short VLC doens't respond at all to any setting changed in qtconfig .
Looking at the bug reports for qt4-qtconfig and particularly this one #564548 looks like there are indeed issues with qt4, and comment 17 states thatQt4 entered in "only security bugfixes" mode, so this won't be fixed.
View 4 Replies
View Related
Apr 16, 2016
I use the stable version of Jessie.I think about migrate to the testing but actually only KDE is suit for meso I need to know whether a new version of this desktop is sufficiently stable or not.
View 6 Replies
View Related
Apr 14, 2011
I have noticed all animated gifs in Iceweasel - Epiphany - Icedove are blinking instead of animating.anyone else have this issue? I am using XFCE on Testing AMD64.
View 2 Replies
View Related
Mar 15, 2016
I did an installation of amd64 testing with KDE 5 three days ago, and I noticed that my session is not restored upon login. I have this option checked at my kde system setting.
A quick search led me the next bug+patch: [URL] ....
(See also [URL] ....)
I did notice that files in ~/.config/session/ are created, but apparently not read upon login.
I tried to send a reply to the relevant bug 796062 but the email bounced back.
Having problem with latest testing and kde5 session restore?
View 0 Replies
View Related
Mar 2, 2010
Anyone knows where can I get the LCD cleartype patches and packages for Debian Testing? URL...
View 1 Replies
View Related
Mar 6, 2010
I'm having a problem with Pulseaudio for quite some time, I already made some topics about it. But still no solution. The thing is, I can't use my keyboard volume control, it's only manipulating my ALSA configuration. Not my main Pulseaudio volume. Here is some information about my sound card:
$ pacmd list-cards
Welcome to PulseAudio! Use "help" for usage information.
>>> 3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_1b.0>
driver: <module-alsa-card.c>
owner module: 4
[Code].....
View 1 Replies
View Related
Apr 9, 2010
I have installed and configured Debian testing and it's great.Now, I wanted to know how I can add or install a good spash screen while booting showing progress bar. I know, its always good to know what is happening. I still want to knowhow to do that.On searching, I only found complex howtos that I, of now cannot understand. I have already got almost every answer to my problems here on the forum.Edit: Also, how can I change sounds for login, shutdown, logout, startup etc?
View 7 Replies
View Related
Sep 12, 2015
I'm on Debian testing and every time I try to install Gnome I get this:
Code: Select all# alexandernst at stupidbox in ~ [18:51:07]
$ LC_ALL=C sudo tasksel install gnome-desktop --new-install
tasksel: apt-get failed (100)
I tried installing it manually:
Code: Select all# alexandernst at stupidbox in ~ [18:51:35]
$ LC_ALL=C sudo apt-get install gnome
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
Is this a problem in Debian repos (held packages) or I'm actually doing something wrong?
View 13 Replies
View Related
Apr 28, 2016
since few days I have installed a fresh debian testing on my new laptop, I am using XFCE4 as DE, I noticed that when I use these themes: greybird, bluebird and albatross the GTK3 applications (mostly from gnome 3 stack) do not display correctly the application. I have another laptop with an older debian testing with XFCE4 and the GTK3 themes work properly. The only relevant difference between the old computer and the new one are the video driver, the older use radeonsi driver and newest the nvidia blob binary.
View 8 Replies
View Related
Feb 24, 2011
i did installed kdenlive 0.7.8 works FINE beautifull but list of effects are low..opensuse installed:kdenlive 0.7.8kdenlive-lang 0.7.8but my other pc installed kubuntu and install kdenlive 0.7.8 work FINE same beautifull but list of effects are many...maybe opensuse is missing package "kdenlive-data" because kubuntu there is package kdenlive-data and there isnot from opensuse...why?kdenlive-data is a extra data for effects exports video, ect ect..
View 9 Replies
View Related
Jun 30, 2011
My Camcorder produces 1080i 50fps. Via handbreak I converted the clips to 1080p 25 fps. (de-interlace) using h264 codec.
These converted clips work very well with Kdenlive. All effects are working and the render results(mp4 max bitrate) are equal to the original.
Openshot is less sophisticated and in my opinion less intuitive.
View 9 Replies
View Related
Aug 23, 2010
I have a query about Kdenlive, when putting avi. Files with audio files like wma. It chugs hard and doesn't play out a smooth rendition of the two. I only went to Ubuntu because I thought windows movie maker was a joke in regards to its freezes. I have tryed a few other video editing apps but as far as I can see Kdenlive has all the basics I need except the smooth file use. I suppose would be: does my 2gb RAM and 64 AMD 4000+ fit a video editing standard? What is the best video editing software out there on ubuntu?
View 1 Replies
View Related
Aug 12, 2015
I just got a new Dell monitor (U2715H), and even with beta Nvidia driver (355.06) on Debian testing x86_64, it doesn't detect highest resolution (2560x1440) when connected over HDMI to Nvidia Geforce GT 620. I have an HDMI 2.0 compliant cable, and according to Dell reps, the monitor should support 2560x1440 over HDMI.
Some suggested using xrandr to set the video mode explicitly. I tried doing it, and first got a EDID file with nvidia-settings, and run edid-decode. Where is what I got there:
Code: Select allDetailed mode: Clock 241.500 MHz, 597 mm x 336 mm
2560 2608 2640 2720 hborder 0
1440 1443 1448 1481 vborder 0
+hsync -vsync
So I used those values to make a new mode in xrandr:
Code: Select allxrandr --newmode "2560x1440_60.00" 241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync
xrandr --addmode HDMI-0 "2560x1440_60.00"
But I got this error:
Code: Select allX Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 18 (RRAddOutputMode)
Serial number of failed request: 31
Current serial number in output stream: 32
View 7 Replies
View Related
Oct 5, 2010
I've got a desktop "konsole" shortcut that works great, it has a "konsole" icon on it that fits well.
I've copied this desktop shortcut to a taskbar shortcut (via drag'n drop).
The result is a usable shortcut, but with a wrong icon image.
I've reproduced the problem three times for different apps and obtained three times the same icon (but the shortcut is however good).
If I open the configuration popup, it displays the correct icon ...
Indeed, I found a way to change the icon : I must modify the icon of the filetype associated with "desktop" filetype ... but after a reboot, all icons will changed Strange isn't it ? have a look of the screenshot
View 3 Replies
View Related
Feb 7, 2016
I have jessie and i have installed kdenlive 0.9.10-2, and it crashes at startup. I try to get a debug trace:
(gdb) run
Starting program: /usr/bin/kdenlive
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Program received signal SIGSEGV, Segmentation fault.
__strcmp_sse2_unaligned () at ../sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S:29
29../sysdeps/x86_64/multiarch/strcmp-sse2-unaligned.S: No existe el fichero o el directorio.
(gdb) bt
[CODE]
View 2 Replies
View Related
May 16, 2010
I just wanted to install Kdenlive and I added the requested repositories. The one called "packman" included unsigned files that were labelled "untrusted" by the installer. Is it still safe to install it? What's your opinion?
View 1 Replies
View Related
May 14, 2010
I have added a couple of clips (1080p50 XVid) to a project, and each of them play fine in the Clip Monitor. I want to add these clips to the timeline and add the Dissolve transition between them.
I have achieved the above and when I click on the Play button on the Project Monitor, I can see the project playing including the transition. All fine so far.
After this first play of my new project, I have tried to move the playback position bar and once I do so, the project monitor goes black. From this point on, I cannot see my project playing whether I start playback from the beginning or from an arbitrary mid-point. I may see a flicker of an image, and the transition effect may appear but that is it until I quit Kdenlive and start again.
I'm stumped as to what could cause this. I did wonder if it was because I was using onboard graphics, but I have upgraded that element of the computer today with no change in the result.
Computer specifications are as follows:
* Ubuntu 10.04LTS Lucid Lynx
* Intel E3200 Dual Core Celeron 2.4GHz
* 1GB DDR2 800MHz RAM
* MSI NVidia 8400GS 512MB Graphics Card
I know the machine doesn't have the highest specification in the world, and perhaps more RAM is needed for this job. I don't believe this to be the causing factor in this problem though considering playback is initially achieved.
Following a search of the internet, I've attempted two possible ways of resolving this: disabling Compiz, starting Kdenlive from the terminal using 'env XLIB_SKIP_ARGB_VISUALS=1 kdenlive' and running the Config Wizard. Neither has given the resolution.
View 1 Replies
View Related
Nov 28, 2010
I'm on kubuntu 10.10 and kdenlive 0.7.8 and since the upgrade to 10.10 Kdenlive crashes whenever I import a clip with a segfault.
Here's the dump from console:
File given: true
Color mode changed to 0
File given: true
QWidget::insertAction: Attempt to insert null action
QWidget::insertAction: Attempt to insert null action
Bus:pen: Can not get ibus-daemon's address.
IBusInputContext::createInputContext: no connection to ibus-daemon
[dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3219fa0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x31564d0]Estimating duration from bitrate, this may be inaccurate
[dv @ 0x3204600]Estimating duration from bitrate, this may be inaccurate
Diverting av_*_packet function calls to libavcodec. Recompile to improve performance
Last message repeated 1 times
swScaler: pal8 is not supported as output pixel format
KCrash: Application 'kdenlive' crashing...
KCrash: Attempting to start /usr/lib/kde4/libexec/drkonqi from kdeinit
sock_file=/home/jason/.kde/socket-denpc/kdeinit4__0
QSocketNotifier: Invalid socket 11 and type 'Read', disabling...
[1]+ Stopped kdenlive
View 2 Replies
View Related
Feb 28, 2009
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
View 5 Replies
View Related
Apr 19, 2011
I have a LMDE (Mint Linux Edition based on testing, now Wheezy) i386 that I just did a dist-upgrade on and now it isn't properly detecting my monitor resolution. I have two 1680x1050 monitors, one attached to the DVI and another to a VGA video switch. When I rebooted to the new 2.6.38-2-686 kernel both monitors were giving me 1024x768. I futzed around for a while and could then get the the DVI monitor to correctly identify the proper resolution, but the VGA monitor resolutely refused to see more than 1024x768.
I was able to get the proper resolution by entering these commands:
[Code]...
Should I file a bug report, and if so, with whom? I have to say, the Debian bug report process is not too newbie (or even not-so-newbie) friendly, but I'd like to help if it doesn't require me to hand-configure a MUA.
Also, I suppose I shouldn't mention it in a single post, but my mouse is behaving rather unpredictably now (click speed, selecting), and trying to reboot dismounts the file system and then starts up again giving me my display manager (in my case KDM), without restarting the system (both from "sudo reboot" and trying to restart with KDM or the Gnome widget). If I really want to restart the system I have to halt it first and hit the power button.
View 4 Replies
View Related
May 5, 2011
First of all - to refresh icon on desktop i've had to install gamin instead fam (after this, icons on desktop was refresh correctly). I don't know that have connection, but who knows. Anyway - my problem. Things marked as red are duplicated entries in menu. How to simple delete them? Menu are not refreshing too - i unmark "Inne" (Others) in alacarte, but it's still visible.
View 2 Replies
View Related
Apr 20, 2010
I have reinstalled karmic 64 bit and am having major problems with kdenlive crashing,again(main reason for my reinstall).It crashes upon openning and I need it,yesterday. it also says This crash information is not useful p, li { white-space: pre-wrap; } Application:Kdenlive (kdenlive), signal: Segmentation fault I've removed it and reinstalled several times same goes for recordmydesktop too!
View 6 Replies
View Related
Aug 12, 2010
I have followed a few guides on using video overlays to obtain a watermark. i am suppose to use the Bluescreen video effect along with the composite transition in kdenlive.
I run the following versions of software:
lucid lynx 10.04
FFMPEG compiled from svn
x264 compiled from git
Kdenlive 7.7.1
Kino 1.3.4
melt 0.5.6 from a PPA
Medibuntu repos
My video I want the watermark over is a kino captured file which is dv avi type 2 (open dml).I have done Bluescreen video effect along with the composite transition but the video clip which the video watermark plays on top of ends up getting darker. for the bluescreen color i have chosen red which is the closest red i could pick next to the spinning logo. the lighting changes on it and gives it an undesirable effect as far as how dark it it. i tried other colors but then the logo either disappears or the spinning logos black video background covers up my video. the reason for my "video" watermark is because it is a spinning logo (not a picture) which can be obtained in .mp4 format here:[url]
My goal is to put that on top of some xbox 360 modern warfare 2 gameplay. i haven't uploaded an example of how dark it makes the footage look yet but it does.
View 5 Replies
View Related