Fedora Hardware :: Mouse Settings Utility Is Severely Malfunctioning
Jul 19, 2011
I don't know whether this should be filed under hardware or laptop, but my wireless mouse is acting sluggish. At first I thought that it was because I chose LXDE as my gui and maybe its pointer was just inherently bad or something, and began to regret my decision. However, upon trying the laptop's built-in touchpad, I found it to be smooth as butter. So, the problem is with the mouse. The mouse worked fine on Windows, so the problem is with the interface between OS and mouse.
Would the problem be fixed by installing a different Desktop Environment? Or is it something else? Is there a better driver I can download or something?One last thing of note: the mouse settings utility is severely malfunctioning. I change the sensitivity and hit OK, but when I check it again, the mouse sensitivity is reset.
View 5 Replies
ADVERTISEMENT
Jun 4, 2010
Openoffice.org apparently ignores the window manager altogether for questions of focus. This combined with opening lots of little dialogs and menus is making it almost unusable. (Over at openoffice.org, this has been answered with (essentially) "I use click to focus, so raising on focus is normal, so I'm putting at the lowest possible priority because it has nothing to do with usability.") The problem is that I use focus following the mouse, with click to raise. This is very convenient for copying between two windows and saves me a lot of time and energy, as I have to do this quite often. Current behavior, however, causes Openoffice.org to raise any window you happen to pass over, thus hiding the floating toolbar or dialog box that you were trying to click on. Worse, as the window you brushed by has gained focus, in most cases, the toolbar or dialog disappears entirely. The only solution is to move everything around so as to have a path to get to your toolbar/dialog without touching another window, or to minimize all but one openoffice document. Is there anyway to make Openoffice.org usable with this setting?
View 1 Replies
View Related
Mar 26, 2010
i study computational systems engineering.. and in my school (itlp) we've got fedora 12 installed in some of the computers.. and we use it to learn network administration and security. the reason of this message.. is that i want to install fedora 12 in my notebook (dv4-1525la vu068la).. but an error keeps poping up.. the error is the next one..
DMAR: No ATSR found
DRDH: handling fault status reg f0003d63
Kernel panic - not syncing: DMAR hardware is malfunctioning
and though i have looked in bugzilla.. there is no help for me there.. they say.. "press tab in the welcome bootscreen when you are about to select whether to install or restore an existing system and write intel_iommu=off and press enter" but that does not really helps.. it just does the same.. in some blogs they say "upgrade your bios".. but i say.. then why i can not install the olders distributions with my "old" bios.
View 1 Replies
View Related
Feb 21, 2011
following problem. A friend phoned me in despair. Her Ubuntu didn't start any more - ASUS-Laptop switched on stops at a ramfs-prompt.
I started Puppy-Linux from DVD-Drive. Worked fine. But puppy can't mount her /dev/sda1 partition either. At least you can see that the partition is still there. Fsck stops with an error. May be the initial problem is a sort of bad hardware by which bad bytes were written to the hard drive. Hard drive and/or memory could be replaced but not the data.
View 7 Replies
View Related
Aug 2, 2010
My wireless connection has always slow on my ubuntu desktop. I have always thought this was a matter of hardware, but after reformatting my harddrive because of recent problems, the wireless has slowed to point of ridiculousness. I would guess I had a dial-up connection if I didn't know better. I've tried simple things like rebooting and removing add-ons, but nothing seems to work.
View 4 Replies
View Related
Feb 5, 2010
cpuid utility is not compiled with U9.04 and the utility is not available as a package with synaptic -
other distributions have it available as rpm . url
Any way to run this utility in the Debian world?
View 2 Replies
View Related
Jul 9, 2010
I bought an Acer Aspire One Netbook and installed Ubuntu Netbook Remix, but the Touchpad tab in the mouse settings is missing. How do I enable it? I am using Ubuntu 10.04 (Lucid).
View 9 Replies
View Related
Mar 29, 2016
I'm new to Debian, and there's something I don't understand about the packages marked as automatically installed. They are supposed to be removed by "apt-get autoremove" if no other packages depend on them, right? Well, I've installed xserver-xorg-video-ati which pulled *video-radeon, *video-r128 and *video-mach64. I later realised that I only needed *video-radeon, and got rid of xserver-xorg-video-ati and the other two. The thing is... xserver-xorg-video-radeon is still there, even if only xserver-xorg-video-ati and xserver-xorg-video-radeon-dbg depend on it, and neither are installed in my system.
Code: Select all$ apt list xserver-xorg-video*
Listing... Done
xserver-xorg-video-all/stable 1:7.7+7 amd64
xserver-xorg-video-ati/stable 1:7.5.0-1 amd64
xserver-xorg-video-ati-dbg/stable 1:7.5.0-1 amd64
[code]...
I obviously want to keep *video-radeon, but I'm just wondering, why does it not get removed when I run "apt-get autoremove"?
View 10 Replies
View Related
Aug 19, 2011
I've been looking everywhere to find out how to configure my touchpad so I can enable two-finger scrolling and disable-while-typing. I have a fresh installation of Debian Squeeze (I did NOT upgrade from a previous version of Debian, as that seems to cause this problem with some Ubuntu installations). I have the xserver-xorg-input-synaptics driver installed (already reinstalled it to no avail) and the gsynaptics package, which was supposed to add the tab in the mouse preferences but did not (as suggested here: I have a Samsung RF510-S01US if there is something about the touchpad this computer has that is not supported or something. (I know for a fact that this touchpad can handle multi-touch inputs, as it works under Windows 7)
View 2 Replies
View Related
May 12, 2010
When i install a mouse theme via appearance settings it only works in firefox and other applications.The theme does not work on my desktop and other various places.I have viewed other threads regarding this error and the only fix would be to change the mouse theme in ccsm but fore some odd reason i do not have the option to change mouse themes in ccsm, i have looked everyware in ccsm and i can not find anyware to change the mouse theme?
View 7 Replies
View Related
Dec 12, 2010
I have a mouse that have left and right move clicks on its scroll so I want to set these two to switch the desktop to left of right one accordingly. Thus, do you know any way to do that. I guess, need shell command to do that and then I need to bind these commands with the button but how?
View 2 Replies
View Related
Feb 21, 2011
type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2 but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes
View 4 Replies
View Related
Jan 5, 2010
When I connect my logitech cordless optical mouse to my laptop I am unable to access it's settings under system settings. The setting options are greyed out and it says
You have a Logitech Mouse connected, and libusb was found at compile time, but it was not possible to access this mouse. This is probably caused by a permissions problem
How or where can I set the permissions so that I am able to access the mouse settings? I've googled around and found lots of references to the above message but no solutions.
The mouse is one of those optical wireless (radio) mice
View 5 Replies
View Related
May 14, 2010
I have added a couple of clips (1080p50 XVid) to a project, and each of them play fine in the Clip Monitor. I want to add these clips to the timeline and add the Dissolve transition between them.
I have achieved the above and when I click on the Play button on the Project Monitor, I can see the project playing including the transition. All fine so far.
After this first play of my new project, I have tried to move the playback position bar and once I do so, the project monitor goes black. From this point on, I cannot see my project playing whether I start playback from the beginning or from an arbitrary mid-point. I may see a flicker of an image, and the transition effect may appear but that is it until I quit Kdenlive and start again.
I'm stumped as to what could cause this. I did wonder if it was because I was using onboard graphics, but I have upgraded that element of the computer today with no change in the result.
Computer specifications are as follows:
* Ubuntu 10.04LTS Lucid Lynx
* Intel E3200 Dual Core Celeron 2.4GHz
* 1GB DDR2 800MHz RAM
* MSI NVidia 8400GS 512MB Graphics Card
I know the machine doesn't have the highest specification in the world, and perhaps more RAM is needed for this job. I don't believe this to be the causing factor in this problem though considering playback is initially achieved.
Following a search of the internet, I've attempted two possible ways of resolving this: disabling Compiz, starting Kdenlive from the terminal using 'env XLIB_SKIP_ARGB_VISUALS=1 kdenlive' and running the Config Wizard. Neither has given the resolution.
View 1 Replies
View Related
Jun 23, 2010
Whenever I try to perform a gesture with easystroke, black blocks take up a large area of the screen, making it so that I cant see anything underneath them until I stop performing the gesture. It didn't used to be like this, before the gesture would perform mostly flawlessly. I don't know what I did to cause it to start malfunctioning, but I would really like it to stop.
View 8 Replies
View Related
Mar 6, 2011
i recently installed ubuntu on a single-core amd 64 with an ati radeon 9100. my desktop is malfunctioning: specifically, when i close a program the program still shows in the task bar below.
i can only see two workspaces in the workspace view.when i use evolution mail i cannot get the cursor to show in the textboxes, nor does it type. i am using the radeon drivers that ubuntu selected for me upon installation. aside from installing chrome and the plug-ins firefox said it needed to view videos, i have not done anything to my installation.
View 9 Replies
View Related
Aug 21, 2010
I am using Fedora 13 x86_64 on a Acer Aspire 7730ZG laptop with: 01:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 9300M GS] (rev a1) I have kmod-nvidia-2.6.33.6-147.2.4.fc13.x86_64-195.36.31-1.fc13.2.x86_64 installed from rpmfuison when I plug in the hdmi cable to the tv, my tv says the resoultion is at 720p, and I can not get any of the resolutions settings to look right on seperate x screen with the nvidia X server settings gui. my tv is a vizo 42inch. also another question is their a way to set the video card to output at 1080? this might be part of my problem?
View 14 Replies
View Related
Sep 27, 2010
I have custom built Linux kernel (2.6.31) and also xorg. xorg is using xserver 1.7.3 . I have an application which simulates the mouse and sends mouse move events. When I switch the device on, the system boots and Xorg comes up, I can see X cursor on the system. When I start sending mouse move events from the application, the cursor do not move. If I attach mouse to the device and then move the mouse, from this point onwards the mouse events get detected from the simulation application. I have checked the dmesg log as follows
BEFORE MOUSE CONNECTED.
.....
kjournald starting. Commit interval 5 seconds
EXT3 FS on hdb4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
[code]....
View 1 Replies
View Related
Jun 17, 2009
I have install fedora11 live and the mouse work well when installing.When you reboot the mouse works ok until the welcome screen apears then the mouse stops working and I cannot continue with the postinstall. I have a 1TB usb externalHD that I am installing fedora11 and have partitioned it so that I have 500Gb free for fedora, system is doucore 2.4,4gb RAm, I tryed doing this with three differend mice and connectting the mouse to different usb ports
View 4 Replies
View Related
Jan 4, 2011
I just upgraded to FC14 (64) from FC13 (32) and the mouse middle button (simultaneous left+right button) paste function has stopped working. I tested it with 3 makes/models of different mice and trackballs. For some reason (left+right) mouse returns the same code as the single right-button ('xev' value = 3). This worked in all previous FC and RH distros I've used in the past. Did a default setting get zonked somewhere? System: Toshiba laptop w/ USB mouse.
View 1 Replies
View Related
Jun 22, 2010
Biggest one that make game unplayable is mouse. Mouse isn't moving smooth it jumps around. I cannot shoot anything. So i asked for help, and everybody just say install windows. And where is fun in that. If people when ever run into problem with some software on linux just install windows. Linux would never go forward. I m not some great gamer, but i would like to be able to play this game. Probably somebody run into same problem. I sow that people talk about something like dis on WOW and wine but simptoms doesn't seem same to me.
View 1 Replies
View Related
Jul 9, 2010
I'm running FC12 and GNOME.If I move the physical mouse about one inch, the mouse pointer moves across the entire screen.That's way too fast and way to sensitive.I prefer the mouse pointer to move far less distance on the screen when the physical mouse is moved.
From System->Preferences->Mouse, I set the various mouse Pointer Speed acceleration and Sensitivity to Slow, Fast, Low, High, and and I couldn't get it any better. At the least sensitive settings. if I move the physical mouse one inch, the mouse pointer moves across the entire screen.How can make the mouse pointer less sensitive to mouse movements?
View 14 Replies
View Related
Mar 31, 2011
Running xubuntu 10.10, disabled xfce settings helper and check for new hardware under session and startup. After rebooting I'm greeted with the normal login screen but don't have mouse or keyboard support! I'm wondering if there is anyway other then reinstalling to fix this. I've got my hdd mounted from the livecd, is there a config file to reenable these, or a way to make them run on boot. Or is there a boot option or a means to start them another way?
View 1 Replies
View Related
Jan 29, 2010
I have just installed Fedora 12 (i686) and I am running the update utility, But after I do, I get this error! What to do? Link to image: [URL]
View 1 Replies
View Related
Oct 1, 2010
When I bring up the Add/Remove Software there is a small square box to the left of the package description. Does a check mark in the box indicate that the package is already installed?
View 2 Replies
View Related
Jul 1, 2010
I have daul boot systems on Dell computers. Dell includes a Utility partition on /dev/sda1 which you are supposed to be able to boot by pressing F12 when booting. I've tried various ways to boot into it. Most recently I put
title Dell Utility
rootnoverify (hd0,0)
chainloader +1
[code]....
View 5 Replies
View Related
Feb 16, 2011
After I install Pidgin my YUM function junst stop to work... I'm now trying to install "QEMU" and when trying to install it thru YUM I got that message below:
[root@Guga-NB Guga]# yum install qemu
Loaded plugins: langpacks, presto, refresh-packagekit
Adding en_US to language list
http://rpm.pidgin.im/fedora/14/x86_6...ta/repomd.xml: [Errno 14] HTTP Error 404 : http://rpm.pidgin.im/fedora/14/x86_6...ata/repomd.xml
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: pidgin. Please verify its path and try again
[root@Guga-NB Guga]#
View 4 Replies
View Related
Jun 28, 2011
I have installed Fedora 14 along with Libre Office along with some other applications so I am learning slowly, re-learning really. However I am having a difficult time understanding partitioning. I would like to make another partition for Windoze. I also cannot get a USB mouse to work. I have run some commands to gather disk info I will refrain from list it here as it is a lot of data. At least until asked to do so. What I have run so far is fdisk -l, df, blkid, & cat fstab.
View 8 Replies
View Related
Jul 7, 2011
Any good software that will do this?
View 7 Replies
View Related
Aug 11, 2009
My laptop is a unibody macbook and has an intel core 2 duo processor. The CPU Scaling Utility never drops below 1.60Ghz. Is this normal? Also. in the ferquency governors, powersave does not appear. Can I install it?
View 1 Replies
View Related