Ubuntu Multimedia :: Karmic + ALSA - Pulse. Playback Works, But Not Record?
Jan 20, 2010
I have upgraded from 9.04 to 9.10. Both playback and record were working using only ALSA. Karmic installed PulseAudio. Looking around the forums I found a post on how to update to the latest ALSA driver (+ lib + utils) and remove pulse to take it out of the equation. With or without pulse I cannot get record working. For work I need to use my laptop as a softphone. I've tested my headset on another machine - headphones and mic both work. Any suggestions on how to resolve this would be greatly appreciated. I have a Thinkpad T61P. Below is the output of some hopefully useful commands ...uname -aLinux moes 2.6.31-17-generic #54-Ubuntu SMP Thu Dec 10 16:20:31 UTC 2009 i686 GNU/Linux
lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
[code]....
View 1 Replies
ADVERTISEMENT
Jan 27, 2011
This is a fresh install of 10.10 (although I had the problem on 10.04 as well). I have installed MythTV on here (via apt-get, its not MythBuntu), and use the system primarily for that. Myth works great, sound in everything, no problems.
However, not much else can play sound. Firefox (.....), totem, mplayer, all nothing. Either just no sound or crash. If I can set them to use Alsa (eg: VLC), then they work.
System is an Asus P5B and on-board sound. I've also got an Nvidia GT210 and would like to use the HDMI out, but can't get anything at all to go through this. Don't know if thats related or not. Sound problems existed before adding the GT210.
One strange thing is, I can go into Preferences -> Sound -> Hardware and click "Test Speakers". Of course nothing plays. However, if I then set the onboard card to "Off", and then back to "Analogue Stereo Duplex", then click "Test Speakers", the left speaker works (right is still silent). But from then on, Pulse apps can play sound, until next reboot. Having FF open on a ..... video or something similar prevents Myth from playing sounds however.
What can I do to get sound working sanely? I don't need optical out, surround or anything. Simple stereo will be fine at this point, via either the onboard or the GT210.
View 2 Replies
View Related
Apr 8, 2011
I have some microphone problems. I can't record anything. (I'm using openSUSE 11.3)
My sound card was detected almost correctly (at least the chip-set was i think). I have an Asrock motherboard (k7upgrade880, with a Southbridge: VIA 8237 | Audio: CMedia CMI9761 6 channel AC'97.
I ran these commands so far with these results - while i was following the audio troubleshooting guide (SDB:Audio troubleshooting - openSUSE
But i have NO audio playback problems - movies, games, music all play well. And the Microphone guid has a broken link
I tried to change my 50-sound.conf file (i read it on a forum, I'm new to linux troubleshooting) from this:
options snd slots=snd-via82xx to this: options snd slots=snd-via82xx position_fix=1
But that did not work either. I did not get any sound with the last line.
View 9 Replies
View Related
Feb 2, 2011
When using Skype, the sound suddenly stops working, both ways (about 4-5 min into the communication). The message "connection failed: connection terminated" is displayed and when I click OK, Pulse Audio closes and Skype freezes. Actually, and I just realized this, the sound suddenly stops working on Firefox as well. (The Alsa plugin in Pulse Audio 'Playback' just disappears). However this occurs after a long period of use. I've just watched about 30 continuous minutes of live soccer through Espn3, before the audio stopped working. No message was displayed though, and just refreshing the page fixed it.
All this makes me think this is some type of Alsa-Pulse Audio problem. I really don't understand well what they are, although I believe Alsa is a driver and Pulse Audio a sound server? Sorry, I started using Linux very recently. I am using Ubuntu-Studio 10.04 and the rt Kernel (2.6.33-29-realtime). Sometimes I use Pulse Audio in Jack and vice-versa, using pactl load-module module-jack-sink and source respectively, but my problem seems to occur even if I unload the modules before using Skype. I believe all this started happening after I started using the rt kernel and/or the module-jack-sink/source.
View 2 Replies
View Related
Nov 22, 2009
switch between Pulse Audio ALSA OSS etc in 11.2
View 5 Replies
View Related
Mar 4, 2011
switch between Pulse Audio ALSA OSS etc in 11.2
View 1 Replies
View Related
Jan 4, 2010
I'm trying to get mplayer to recognize ALSA and/or pulse audio server, preferably both. On my laptop, mplayer works fine -- mplayer -ao help lists oss, alsa, pulse, and jack, among others. But here's the output of mplayer -ao help on the computer I'm trying to set up:
[Code].....
ALSA and pulse are both installed, and pulse is running -- ps -A | grep pulse gives: 3627? 00:00:00 pulseaudio Yet, mplayer fails to realize this. I'm sure I'm doing something wrong that's really simple...but what?
View 2 Replies
View Related
Oct 16, 2010
I have made a pretty sizable mistake. I was trying to figure out why my game was having sound issues when I was told to update my sound drivers. After a bit of searching, I came across this website. I downloaded and ran the script in the first link. Minor problem: I was using PulseAudio, not ALSA. Needless to say, the script didn't work. After the machine rebooted, I had no sound at all. I was planning on switching to ALSA anyway, so I found this thread and ran the following commands:
[Code]....
View 9 Replies
View Related
Feb 18, 2011
I want to remove pulse and install alsa instead but I can't seem to be able to do it. I tried to search for all packages with "pulse" in their names and purging them but it didn't work because aptitude wanted to remove all of the packages that used pulse with along with pulse.
View 2 Replies
View Related
Jun 16, 2010
Is it possible to install XBMC onto Ubuntu Lucid and still have passthrough audio to a connected receiver (i.e. a workaround with Pulse)? I have an Acer Aspire Revo R1600 connected via HDMI to my Onkyo reciever. I am able to get desktop sounds and play MP3 files from XBMC, but passthrough has been a bear. If I tell Pulse that my sound device is analog, for some reason I can get XBMC to pass through audio. However, I would like to keep system sounds and have the passthrough ability if it's possible. As I understand it (from about two weeks of fidgeting) this is a limitation of Pulse and it's lack of pass through support. It seems so simple. I've tried multiple different .asoundrc configirations none of which have gotten me there. I've upgraded Alsa. I'd rather not run XBMC live if I dont have to. I'd like to have the ability to have a workstation for when I need it. I've upgraded to the latest NVIDIA driver available from their website - 195.36.31.
View 9 Replies
View Related
Apr 26, 2010
could not get my sound to operate so i followed the intructions toMulti-media and Restricted Format Installation Guide - openSUSE Forumsnow i have a working audio and video player but my sound is depreciated to an almost inaudible levelwhen i try to open pulse i get connection failed:connection refusedand when i try alsa gui i get function snd_ctl_open failed for default:connection refusedcan anyone please correct this with me or for me. Noob wanting not to regret leaving windows
View 9 Replies
View Related
Feb 22, 2011
I wish to record what I hear, and hear it through the speakers at the same time. Doesn't sound to unreasonable.
I first of had problems getting it to record anything at all, so threads here and here helped.
The problem I have is I can only switch between having playback/volume/output through the speakers AND no feed/volume to the recording process, OR the recording process has a audio source but I cannot hear it!
Im sure I had it working so it played out the speakers and recorded briefly, but dont know what I've done!
I installed many audio type packages along the way to getting it to record at all. I dont know what I need and dont.
View 1 Replies
View Related
Jan 12, 2010
I am trying to record audio playback from an application and the microphone at the same time on recordmydesktop using pulse audio. I just can't figure out how to mix them both. I have tried a lot already and can only get either the mic or the audio playback to be recorded, not both. Can this be done using pavucontroll?
I have been search now for hours to find a solution (also here on the forum) for this and getting really frustrated now. Maybe i'm just missing something really obvious, so sorry if this is a stupid question.
View 5 Replies
View Related
Jan 20, 2011
I need to know how to setup Ubuntu 10.10 64-bit to record what's called the "stereo" and "mono" mix popular in Windows where it records anything playing out of the speakers. The goal is to play the microphone through the speakers at the same time background music is playing and thus record both. I also need to know how to play the microphone through the speakers.
View 1 Replies
View Related
Mar 17, 2011
I've got sound - I hear all the system sounds, I can play sound files, CDs, etc. But I have not been able to record and play back anything with success.
Originally, when I would record (either with arecord or with audacity) I would get extremely low quality sound, with lots of noise and crackling, and my recorded voice was barely audible (even with volume turned up to max). I played with alsamixer for hours without being able to improve matters.
Things are worse now. I tried installing alsa-firmware, as indicated at SDB:Audio troubleshooting - openSUSE. I also tried updating alsa following instructions given at SDB:Alsa-update - openSUSE. I'm not sure which of these changes did it, but the result is that I can no longer record ANYTHING at all. I get absolutely nothing, not even the low quality noise and crackling I was getting before. It's as if there is no audio input at all.
Uninstalling alsa-firmware and reverting back to the older alsa version (1.0.20) didn't change a thing.
I'm running openSUSE 11.2, kernel 2.6.31.14-0.6-desktop, alsa 1.0.20. My sound card is a Creative X-Fi (by the way, yast cannot detect my card, another problem I have never solved).
View 9 Replies
View Related
Mar 3, 2010
I have alsa 1.0.22 on my system. I can plug in my pcmcia card into my laptop, and my computer register's it, but when I plug in my microdock, alsa still thinks it's an EMU 1010, which is just the basic one, and I have a 1616, so none of my inputs register anything at all, so I can't record audio. The only thing that seems to be working perfectly or at all, are the audio jack on the pc card, the headphone jack on the microdock, and the stereo mini out for speakers on the microdock. I think it's odd that the headphone and stereo outs work on the microdock, but I can't input any audio. how to get the rest of my microdock to work?
View 2 Replies
View Related
Jan 15, 2010
Is there any way to record audio from internal source with gtk-recordmydesktop?
View 2 Replies
View Related
Dec 20, 2010
I am attempting to record my microphone input using ffmpeg / alsa but always receive the following error:
[code]...
Using arecord works perfectly with hw:0,0. I had also tried to use /dev/snd/hwC0D0 as input but I receive an error from alsa saying that it doesn't exist (despite it existing and having adequate permissions). I know absolutely nothing about hardware but am comfortable around the command line
View 2 Replies
View Related
Nov 17, 2010
I am new to this forum and have recently switched to Ubuntu. The OS installed without a hitch and was able to get video card, wireless internet installed with relative ease. However, I have encountered a problem installing my E-mu 0404 PCI sound card via the ALSA packages in Synaptic.
Code: 04:03.0 Multimedia audio controller [0401]: Creative Labs SB0400 Audigy2 Value [1102:0008] As you can see once the packages were installed the OS could see the hardware ok, but when I tried playing a standard MP3 file (16 bit, 44.1khz, 192kbps) in Totem it started playing the file back around 15-20% faster than normal? To me it sounds as if the software is playing the audio back at higher sample rate than 44.1khz hence the faster speed, though I'm not 100% on that.
The next thing I tried was playing the same file back in VLC and it was exactly the same (15-20% too fast), but this time it was horrible and glitchy as well, almost as if the audio buffer size was set to small. The same thing happened when I tried playing back some flac and wav files (all 16 bit, 44.1khz) also. I have searched google (and read the comprehensive sound card guide on this forum) and read several forums, guides, etc. for anybody posting the same issue with this particular card but could find nothing. From all reports I've read this card should work fine under ALSA. For the record I'm using Ubuntu 10.10 64bit kernel running on a Dell Dimension 9200 (Intel Core2Duo E6400 2.13ghz) with 2GB RAM.
View 9 Replies
View Related
Sep 13, 2010
I was just wondering if there was a way to use ALSA without PULSE, PULSE AUDIO is causing my Skype to crash continually.
I entered the following command into terminal- sudo apt-get remove --purge pulse-audio
Now my system has no sound at all, soundcards are detected in aplay -l, but unfortunately when i go to sound properties it just says waiting for sound system to respond.
View 2 Replies
View Related
Jan 31, 2010
I'm running Ubuntu 9.10 on an Asus F3JC laptop with an integrated webcam and microphone. The webcam is a
Code:
user@ubuntu:~$ lsusb
Bus 001 Device 004: ID 05e1:0501 Syntek Semiconductor Co., Ltd DC-1125 WebCam
and it works. If i tap on the microphone or if I blow on it, I hear noises but after I record something with gnome-sound-recorder I don't hear any sound! The same with Skype, for example.
On Xp (other hd partition) it works.
The audio device on the laptop is a
Code:
user@ubuntu:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC660 Analog [ALC660 Analog]
Subdevices: 1/1
[Code]....
If I open the "sound preferences tool" the device for sound input is "Internal Audio Analog Stereo" and even if I tune the volume of the microphone I don't see any movement in the input level bar. I've also checked alsamixer and the digital volum in the capture interface is set at the maximum.
View 6 Replies
View Related
Oct 28, 2010
I'm trying to record a video with sound through FFmpeg, and while it records the system sounds just fine, it doesn't record the microphone (in fact, it crashes on doing so!). The strange thing is that if I use arecord, it works just perfectly, but through ffmpeg it crashes.This is the command that I use to launch FFmpeg:
Code:
/usr/bin/ffmpeg
-f x11grab
[code]....
View 9 Replies
View Related
Dec 15, 2010
I spent a few days trying to make audio work on my TV connected via HDMI to a PC. The speaker test used by the sound preferences was dead, as was MPlayer. I managed to find a solution for MPlayer, giving the option "-ao alsa:device=hdmi", as specified in this article:So, basically ALSA can see all my devices. This is the output of aplay -l:Quote:
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
View 3 Replies
View Related
Feb 12, 2010
i'm using ubuntu since 8.04, and the current (9.10) is a fresh install on new hdd.the problem was the same each version (8.04, 8.10, 9.04, 9.10) - while i'm playing the video (no matter if i use mplayer [smplayer], gstreamer [totem] or adobe flash plugin [videos]) the playback freezes randomly for about 5-10 sec. during the freeze the movie is still played, i can hear the sound is ok. if i press [space] in smplayer it pauses the playback, so the responses for keyboard actions are ok. not for the mouse clicks however. i can still move the cursor around the screen but it seems the system is not aware of it (clicking on the "pause" button doesnt pause the movie). except the cursor, nothing changes on the screen (if the im [pidgin] window was blinking because of new message, it freezes etc etc).
is there any kind of log i could look into just to try figuring out the problem?it is impossible to watch any movie on my pc (currently i don't have tv)i installed windows on external hdd once and it played videos fine so i suppose it's not hardware problem .
View 3 Replies
View Related
Feb 7, 2010
I cannot find a post that matches this scenario...the id created during the install (from CD) of Karmic has fully usable sound. However, users created from the Users and Groups app do not.
I have made sure that all users are defined to the audio, pulse, pulse-audio, and pulse-rt groups. No luck.
I have followed every step I have read having to do with the alsamixer. No luck.
I have verified that alsa and linux itself are at the latest versions.
View 9 Replies
View Related
May 15, 2010
Does anyone know of an alsa based software multi-band (10 or more) graphic audio frequency equalizer that works with Suse 11.x? To be clear, I don't mean an equalizer within an audio or video player. One that can be used with any sound application, that works between the output of the player and the output plugs on a motherboard or sound card.
View 9 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
Jan 24, 2010
I have 2 soundcard - a M/B built in Intel AC97 and an old Aureal (later SoundBlaster). This is because there's a problem with Intel's microphone in XP. So I use Intel for playback and Aureal for recording.
Now, how do I duplicate same setup in Suse (to avoid switching plugs) ? I am a bit lost in where to specify hardware to be used for recording and playback.
View 5 Replies
View Related
Jan 13, 2010
I recently just installed Ubuntu on this laptop and I have a issue with playing back videos on my LAN server.
Thing is, I've got another computer too where it works flawlessly so I was wondering what causes this on my laptop...
I mount the FTP location and I get access to all the files on the server. On my other computer, I can basically just click any video file and it would act as it would if it was on my HDD already, but when I try to do that on my laptop it will not play the video file at all.
I've tried several media players too, but I usually just use VLC so here is the VLC error:
Code:
And then ask if I want to repair it. However, once I drag the file over to my desktop it works.
So why won't my media players read video files over FTP?
And the whole "Connect to server" is acting a little weird. If I try to use the DNS of the server instead of the local IP I will not get any response. However, using the DNS in other applictions do work.
View 2 Replies
View Related
Nov 19, 2010
I have recently been forced to do a hardware upgrade (my previous mobo died). Now, sounds works ok with,amarok because kde has recognized the new hardware and switched to it.
..... does not work, likely because flash uses alsa-oss which is probably not configured automatically. I have tried uninstalling and reinstalling both alsa-oss and flash, but it didn't solve the problem.
View 1 Replies
View Related
