Ubuntu Installation :: Upgraded To 11.04 - Now K9copy Is Broken?
Jun 22, 2011
Last week I did the upgrade from Ubuntu 10.10 to 11.04. Did it on-line, and it went really well; actually the best upgrade since I started with Dapper I promptly got rid of the Unity desktop and went back to Gnome. Everything worked normally, except K9copy does not work any more. Whether I invoke it from the terminal or the Apps menu, it open the first window and crashes when trying to read the DVD; here is the terminal output:
Code:
jf@mainu:~$ k9copy
*** libdvdread: CHECK_VALUE failed in /build/buildd/k9copy-2.3.6/src/dvdread/ifo_read.c:1088 ***
*** for data[i] + sizeof(ptt_info_t) <= vts_ptt_srpt->last_byte + 1 + 4 ***
*** libdvdread: CHECK_VALUE failed in /build/buildd/k9copy-2.3.6/src/dvdread/ifo_read.c:1088 ***
*** for data[i] + sizeof(ptt_info_t) <= vts_ptt_srpt->last_byte + 1 + 4 ***
[Code]...
View 3 Replies
ADVERTISEMENT
Sep 1, 2011
I recently upgraded my vps from 8.04 to 11.04.
When I run apt-get upgrade I get
Code:
If I try apt-get install -f I get
Code:
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
Suggested packages:
The following NEW packages will be installed:
View 1 Replies
View Related
Aug 12, 2010
This is a strange one... I updated my linux distro and all the software with it and now pcmanfm (my file manager) is broken.
After 98 updates and 4 hours of compiling all the other updates work fine except for the pcmanfm one.
Running it in the terminal says this:
Code:
View 3 Replies
View Related
Apr 24, 2010
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
View 2 Replies
View Related
Feb 20, 2010
I cant download k9copy :S I cant find it anywhere on the getdeb and the link to the getdeb k9copy page on the k9copy website just takes me to the welcome page.
View 5 Replies
View Related
Nov 7, 2010
I have made the jump to Ubuntu, I have installed 10.10 on a Dell Precision 360, I have sound on VLC player, internet radio, but when I want to preview in K9copy I see the Video but hear no sound.
This may also be the issue with dvdshrink under wine, which loops fo about second or 2
I dual boot between Windozs XP professional and Ubuntu
View 2 Replies
View Related
Nov 11, 2010
I've tried pretty much every DVD ripping program available, DVD::Rip, DVD95converter, DVD Movie Backup. My favorite backup program is k9copy (easiest to use and has all the features I need). But no matter what I try, certain Disney movies just won't backup. Specifically, at the moment, many of the Miyazaki/Studio Ghibli films.
After selecting the disc, the program either crashes out immediately, or it starts filling up the memory, slowing everything down, until finally it crashes. I thought updating to the newest version would maybe help (not even available through standard "Update Manager", had to find it myself), but the same problems occur. I'm currently trying with ddrescue, hoping that works. But I don't really like the idea of using a series of programs to get the output I want.
Is there a program that can backup, compress, and convert a Disney movie into a playable/burnable ISO file? Because these films are Japanese, I would definitely prefer something that can output normal switchable subtitles and audio (as opposed to an MPG or AVI that just has the one audio track).
View 7 Replies
View Related
Apr 7, 2011
I'm attempting to rip a DVD made by a friend, and I am using k9copy with minimal success. I am attempting to rip to .avi, but every time I start the backup, my DVD drive shuts off at 64%. I get this issue: Code: Executable: k9copy PID: 6563 Signal: Segmentation fault (11)I have had a few issues with the drive before, but nothing this consistent. I'm running k9copy 2.3.5 and 10.10 maverick.
View 1 Replies
View Related
Oct 21, 2010
I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies
View Related
Nov 12, 2010
The software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
View 9 Replies
View Related
Feb 17, 2010
Using the Synaptec route, I can only install version 2.3.3, which is backlevel (latest is 2.3.5)
I have tried updating Synaptec, tried downloading directly from the website, but cannot figure out how to compile, etc.
how I get the latest version available in Synaptec, or another way to get the latest?
View 2 Replies
View Related
Mar 14, 2010
About 2 weeks ago I upgraded my Ubuntu OS from 8.04 to 8.10 and then to 9.04 with kernel 2.6.28 - 10 - Generic.Today I discovered K9Copy no longer works. When I start K9Copy it comes up ok but if I click on anything in the main window (file, copy, etc.) I get a message that says:A fatal error occured.The application K9Copy crashed and caused the signal 11 (SIGSEGV)
View 2 Replies
View Related
May 23, 2010
I am using k9copy to extract the five titles in a DVD ISO-image to separate avi-files. I selected the copy option for both audio and video, and made sure all the tracks were selected. The resulting avi's played without sound in Totem. VLC gave an error message that audio format " []" was not supported.
I then did the extract again, selecting aac for the audio processing. The result was the same.
Again, with mp2, the same result.
The DVD contains audio in "mp2 2ch 48KHz 20bps" format (information shown by k9copy).
When I play the video from the ISO, using VLC, sound is ok.
How can I get k9copy to extract the video with sound?
View 2 Replies
View Related
Dec 25, 2010
I'm trying to use K9copy in Ubuntu 10:10 to shrink some videos from a straight iso copy down to a 800MB avi file. The video seems to copy fine and the picture looks fine but when I try play it in VLC theres no sound.
Is there something I'm missing? And yes I played the ISO in VLC and had it play with sound fine.
View 3 Replies
View Related
Feb 17, 2011
I want to copy one track/chapter from a DVD to an AVI file, but the sound is not copied only the video. I
- selected track/chapter by clicking checkbox
- selected 'MPEG-4 encoding' for output
- used default settings (codecs were 'copy' for video and audio)
- clicked DVD copy action
Result:
1. Movie Player: no sound
2. VLC: Error message 'No suitable decoder module: VLC does not support the audio or video format How can I get sound and video?
P.S.
Using k9copy version 2.3.5. I tried all audio codecs available in the k9copy Audio tab. They failed in the same way as before. The chapter list contains 'audio 1 Unknown pcm 2ch 48kHz 16bps'. I don't know how to interpret that. Also installed and tried AcidRip and Dvd:rip. Sound worked fine for both. AcidRip did not show any audio settings. Dvd:rip showed:
Select track: 1: xx lpcm 48kHz 2ch => 1
Codec: MP3
Bitrate: 128 48kHz
Quality: 2
Filter: None, volume rescale only
Volume rescale: 0
Again, it does not mean much to me.
View 1 Replies
View Related
Apr 9, 2011
If I use K9Copy to compress a 6.4 gb DVD to a 4.4gb ISO files, it heats up the CPU and the machine shuts off. When I do this with system monitor ON, I see 160% to 180% CPU usage. I guess this is due to dual core on my Gateway laptop.Then I installed DVD Shrink and tried the same by running DVD Shrink using Wine. This caused the same problem.I did not have this issue when I was using Windows Vista. Is there anything that I can do to avoid this problem?
View 7 Replies
View Related
Apr 29, 2010
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
View 3 Replies
View Related
May 11, 2010
I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.
View 2 Replies
View Related
May 27, 2010
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
View 9 Replies
View Related
May 30, 2010
I upgraded the Ubuntu 10.04, and afterwards I can't print. Cups won't detect printers, hp-setup won't, hp-probe won't. Tried rebooting, reinstalling HPLIP, & CUPS. Installed latest version of HPLIP. did a purge of HPLIP and CUPS, and reinstalled, rebooted.
View 4 Replies
View Related
Jun 20, 2010
I had upgraded to 10.04 but can not use kernel 2.6.32-22.32+, I had to go back to kernel 2.6.31-21. because of the default video driver had change from the one kernel to the other, and I do not know how the correct it. In 2.6.32-22 the font would change and to a smaller size and I can barely view anything because it looks like some two year old puke a box of crayons all over the screen.
Second issue is it does not matter what power-saving mode I am in, in 5 minutes time it with go into suspension. Or right after coming out of hibernate, it will go into suspension indefinitely and no coming out of it and must to a hard boot.
View 6 Replies
View Related
Jun 24, 2010
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies
View Related
Oct 17, 2010
Upgraded to MM and it boots, desktop and apps run but cannot access synaptic - gives brief error message. In terminal, ran "sudo apt-get update" and got this message:
Reading package lists... Error!
E: Problem parsing dependency Depends
E: Error occurred while processing gsfonts (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
View 1 Replies
View Related
Dec 4, 2010
While using Ubuntu 10.04 my system worked perfectly, now that I've upgraded via the Upgrade Manager, there is no sound on my system. My computer is very Ubuntu friendly, as I've never had this problem with any other version of Ubuntu. What can I do? If I need to reinstall 10.04, or roll back to 10.04, how do I do that? If I can fix by reinstalling 10.10 how do I do that. I dual boot with Windows 7 Pro and Ubuntu 10.10.
View 1 Replies
View Related
Feb 18, 2011
So I was on 8.04, and I decided to hit the upgrade button on the gui to upgrade to 10.04. Well the upgrade went fine and all...until I rebooted. Now I get this
Starting up .
mount: mounting none on /dev failed: No such device
udevd[984]: error getting socket: Invalid argument
error initializing netlink socket
udevd[984]: error initializing netlink socket
[Code]...
I found some other posts and tried adding the rootdelay=35 and acpi=off but those did not fix it. This is a virtual machine running on VMWare ESXi 4.1.
View 9 Replies
View Related
Apr 29, 2011
I have Lubuntu installed on my EEEP 1005HAB. I just successfully upgraded to Naughty Narwhal and it is asking me for my username and password. They don't work. I type my name and password in exactly like I did every time I logged in before, and nothing happens, it just gives me a blank username box again.
View 4 Replies
View Related
Apr 30, 2011
After upgrading to Ubuntu 11.04 I only get the text mode login. I have a ATI Radeon HD 3600 card and before upgrade I used the propiertary driver (to make the dual screen mode work).I have tried to download the driver again from ATI and installed that but it does not helped.I have put the Xorg.0.log and some other outputs in http://83.251.70.81/X/
View 3 Replies
View Related
May 6, 2011
I just loaded the new upgrade and now the top bar does not appear.
If the cursor moves over the top bar area the menus drop dow, but every else is black-- power button, wireless icon,... all gone.
How do I get these back?
View 4 Replies
View Related
May 17, 2011
I upgraded from 10.10 to 11.04 via the update manager and somehow in the middle of it, the package failed. And so I carried on using the ubuntu, rebooted and now the disk is not ready and cannot mount. Press S to skip or M for manual recovery. Skip does nothing, only can use manual recovery.I tried everything from the ubuntu forums & google from other people who had the same problem. The problem is my root terminal on manual recovery doesn't have networking.Only can use liveCD which I still can't connect to the internet because I use wlan0 from ndiswrapper.
I am a dual booter of Ubuntu 10.10 on one partition and Windows XP on other. I edited the grub to boot those. One HDD is partitioned into 2 drives so one partition holds XP and the other partition is a "translator" that holds files which both ubuntu and XP can access. (don't ask me why, I cleaned the dust off my PC recently after 3 years )My outputs are:
/boot/grub/menu.lst
Code:
title LINUX - Ubuntu 10.10 - kernel 2.6.35-28-generic
root (hd1,0)
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=85de06c5-cf3e-46b8-8c14-2c217be8dd9d ro vga=0x317 splash
initrd /boot/initrd.img-2.6.35-28-generic[code]....
- I commented the UUIDs, that doesn't work.
- I tried remounting it, no effect.
- I fsck'ed it, no effect.
- I booted using LiveCD but cannot connect to the internet due to wireless.
- Cannot apt-get update & upgrade due to no internet.
That's all I remember cos I basically tried alot different ways and cannot get it to boot.I am thinking of formatting the mess and start all over again but I don't really want to do that because it is a good system, just that the grub file and fstab is kinda cluttered.
View 7 Replies
View Related
Jan 19, 2010
I am trying to install the latest version of K9copy, but the only available version is in the .tar.gz file package. I placed the folder on my desktop and extracted the files. Now I have the .tar.gz file and the extracted files on the desktop. I need to install the files, but I don't know which command to use or what to do to get any commands to work.
(Keep in mind that the extracted folder is named 'k9copy-2.3.4-Source.tar.gz')
./configure
make
make install
This seems to be the most common answer to install the files, but it NEVER works, nor do I understand where the package files come into play when I type this command into the terminal.
View 9 Replies
View Related
