General :: Openssl Add-on Module Fails?
Aug 10, 2011I am a new administrator and am running SLES 11 on a VM. I have openssl installed, but when I attempt to compile an add-on module to Nginx I get the following list of errors:
[Code]...
ADVERTISEMENT
Programming :: Perl Module Installation Fails
Jan 12, 2011Using perl -MCPAN -e shell then install Mail::Message then yes to everything (except the test that needed an IMAP server) resulted in.
View 3 Replies View RelatedUbuntu Multimedia :: Installing Webcamstudio Module Fails
Jan 6, 2011When trying to compile the webcamstudio modulae (ws4gl.org) it doesn't give an error, but when I want to modprobe it....
Code:
This is from dmesg:
Code:
Slackware :: VirtualBox < 3.1.4 Module Build Fails On 2.6.33 Kernel
Mar 4, 2010I had an issue with the module build for vbox 3.1.2 breaking on the latest kernel ( /etc/rc.d/rc.vboxdrv setup ). Apparently the issue is that a kernel header (autoconf.h ) has changed its location in the module tree and hence the issue.
2 options:
1. upgrade to 3.1.4
2. create a symlink as follows
cd /usr/src/linux/include/linux
ln -s ../generated/autoconf.h autoconf.h
Slackware :: X Fails To Start After Upgrade - Invalid Module
Mar 6, 2010So I made the upgrade to slackware64-current and all of a sudden after my next reboot, startx failed, and x refused to start the output was the following:
Code:
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux hd830 2.6.33 #3 SMP Sat Feb 27 19:42:32 CST 2010 x86_64
Kernel command line: BOOT_IMAGE=Linux ro root=803 vt.default_utf8=0
Build Date: 23 February 2010 12:09:32PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 6 19:21:18 2010
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
WARNING: Error inserting button (/lib/modules/2.6.33/kernel/drivers/acpi/button.ko): Invalid module format
WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.33/kernel/drivers/i2c/algos/i2c-algo-bit.ko): Invalid module format
WARNING: Error inserting agpgart (/lib/modules/2.6.33/kernel/drivers/char/agp/agpgart.ko): Invalid module format
WARNING: Error inserting drm (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm.ko): Invalid module format
WARNING: Error inserting drm_kms_helper (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm_kms_helper.ko): Invalid module format
FATAL: Error inserting i915 (/lib/modules/2.6.33/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel modesetting driver detected.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support. Please also check the log file at "/var/log/Xorg.0.log" for additional information. So then after some googling I got the suggestion to downgrade udev-151 to udev-141, but that yeilded no results. So I did some more googling and a bunch of people who had the same problem said that downgrading module-init-tools worked, so I downgraded from module-init-tools 3.11 something to 3.6 and now, not only does my X no longer work, but no modules are being loaded I believe, for example I saw in my startup that fuse was not being loaded, ndiswrapper which I had installed was not loaded.
CentOS 5 :: Yum Fails With 'module' Object Has No Attribute 'main'
May 5, 2009Any attempt to run yum produces the following error:
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.main(sys.argv[1:])
AttributeError: 'module' object has no attribute 'main'
It doesn't matter what command line arguments I use I get the same.I've spent a day or so searching on Google but not had any luck in identifying what is causing this problem.
Fedora :: Vmware 1.0.10 On Core 12 - Fails On Building The Vmmon Module
Jan 25, 2010I have tried installing Vmware-Server 1.0.10 on Fedora Core 12. After installing all packages it fails on building the vmmon module. In the internet i found many patches and vmware-any-any-updates...but nothing worked. My Kernel Vresion is 2.6.31.12-174.2.3.fc12.i686.PAE...
View 2 Replies View RelatedUbuntu Installation :: X Pircture Fails After Nvidia-module Is Enable?
Mar 16, 2010i've got really wierd problem with kernel 2.6.31-20. After kernel update nvidia-module crashes "picture" on gnome & kde, it gives random colors / pixels to the screen. U can use it, so it's somehow working. Without nvidia module everything work perfectly. I've tried 5 different drivers but no solution. Also reconfigured X (dpkg-reconfigure xserver-xorg).This problem is also with older kernels. Problem came after i rebooted to 2.6.31-20 kernel.
View 1 Replies View RelatedGeneral :: Why Does Openssl 0.9.8g Suddenly Changes To 0.9.8b
Jul 27, 2011I have a weird problem in which I try to use cryptodev in Openssl version 0.9.8g, but then if an error occurs or the system logs out, the version for Openssl rolls back to 0.9.8b.I have also tried reinstalling, but no dice. The version stays 0.9.8b. I am using Intel Tolapai with RedHat 5
View 1 Replies View RelatedGeneral :: Openssl - Libcrypto.so ?
Jan 14, 2011I was upgrading openssl 0.7 to 0.9.81 in my redhat 9 server. I've followed the guideline from here: [url]
Now everything is messed up There's no libcrypto.so in /usr/local/ssl/lib directory. Only libcrypto.a. Neither in /usr/lib or /lib directory. I can't even run scp or wget to download rpm of openssl. Getting libcrypto.so error. I've use locate command to find libcrypto.so. There's none. I've run ./config, make, make test and make install command again in the openssl 0.9.81 source directory. But no luck. No libcrypto.so. This is a production server and the httpd went down.
General :: Adding A New Kernel Module To Wireless Driver Module?
Apr 22, 2010I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedServer :: Php-mysql Dynamic Module Fails On RHEL 5.5 - Undefined Symbol: Executor_globals
Nov 17, 2010I've recently installed a RedHat Enterprise Linux server and am attempting to get PHP/MySQL installed on it. It cannot load the dynamic php mysql module, giving me an error (in /var/log/error_log) that reads as follows:
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/mysql.so' - /usr/lib/php/modules/mysql.so: undefined symbol: executor_globals in Unknown on line 0
(In fact, it fails to load ALL of the dynamic php modules, either with the "undefined symbol: executor_global" or "undefined symbol: core_globals" I DO NOT WANT to compile anything -- I want to stay with stock RedHat released software.
[root@hostname-suppressed httpd]# uname -a
Linux hostname-suppressed 2.6.18-194.17.4.el5PAE #1 SMP Wed Oct 20 13:13:33 EDT 2010 i686 athlon i386 GNU/Linux
[root@hostname-suppressed httpd]# cat /etc/redhat-release
Red Hat Enterprise Linux Server release 5.5 (Tikanga)
[code]....
General :: Install Module U32 Into The Netfilter Module For Kernel 2.6.27
Jan 30, 2011I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
General :: Updated Openssl And Now Nothing Works?
Oct 7, 2010I've been googling around and have had a bit of a hard time trying to find help with this little issue. Managed to install CouchDB on the server at work after doing some fiddling due to not having spidermonkey availableAnyways, rt of this involved updating openssl.fter doing this however all hell broke loose.It seems a lot of programs needed the old version- I keep getting: error while loading shared libraries: libssl.so.0.9.8: cannot open shared object file: No such file or directory
I did a search:
>locate libssl.so.0.9.8
And it returned:
[code]...
General :: Unable To Determine What Exactly Python OpenSSL?
Jun 11, 2010I haven't been able to determine what exactly Python OpenSSL and what it does. Google searching has not yielded me anything I can understand. In a terminal window (using RHEL 4.8 AS) typing
Code: rpm -qi pyOpenSSL yields information pertaining to the version of Python OpenSSL on my server. Can you explain what Python OpenSSL is in simple terms?
General :: Downgrading OpenSSL On Centos - Errors Occurring
Sep 27, 2010I recently just installed centos, but it appears that when I installed it v 0.9.8e was installed consequently, all the lib's etc. are /lib/libssl.so.0.9.8e instead of an ordinary /lib/libssl.so.0.9.8 etc. and this is causing some problems for me, as programs are looking for /lib/libssl.so.0.9.8, and even if i symlink/copy/move /lib/libssl.so.0.9.8e to /lib/libssl.so.0.9.8 there are still some errors occurring. I had been reading that supposedly yum is meant to have a "yum downgrade" option, however it doesn't appear to be recognised when I run it on my centos server.
View 2 Replies View RelatedGeneral :: Error Dynamic Loading OpenSSL 1.0.0d In Configure Bind-9.7.3?
Mar 17, 2011this is my first post i have this error in ./configure for bind 9.7.3: checking for OpenSSL library... using OpenSSL from /usr/lib and /usr/includechecking whether linking with OpenSSL works... yeschecking whether linking with OpenSSL requires -ldl... unknown configure: error: OpenSSL has unsupported dynamic loading
View 1 Replies View RelatedGeneral :: Failed To Load "canberra-gtk-module": Libcanberra-gtk-module No Such File Or Directory
Mar 25, 2011i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
General :: (EE) Failed To Load Module "vmwgfx" (module Does Not Exist, 0)
Jun 23, 2011I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
General :: Getting Error "invalid Module Format" And "insert Kernel Module" / What Is This?
Feb 22, 2010What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedHardware :: Partport Module Is Seeing Parallel Port But Lp Module Doesn't Found Any Device
Mar 3, 2011I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View RelatedNetworking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?
Jun 1, 2009When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
Ubuntu Servers :: Enable The Rewrite Module In Apache To Enabled The Module?
Jan 28, 2010I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
Ubuntu :: Error While Hash Checking Of Torrent - The Sha Module Is Deprecated - Use The Hashlib Module Instead From Sha Import Sha
Jun 8, 2010Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
Fedora :: Downgrade Openssl 1.0.0 To 0.9.8k?
May 14, 2010I'm unable to compile ruby 1.9.X and I found out it was related to openssl, although it seems there's a patch available for ruby I don't know how to apply it so I was thinking on downgrading to openssl 0.9.8n
I'm using F13 btw, I'm still posting it here as openssl 1.0.0 was first introduced on F12, the other major distros are still using openssl 0.9.8k so there's no much information on the problem
Server :: Openssl Support For SNI And TLS?
Apr 1, 2010I want to recompile Apache in order to be SNI supportive because I need to use ssl named based virtual host:
I referred to the following links:
[URL]
I installed the latest version of openssl which is now openssl-1.0.0 I ran the following commands:
./config enable-tlsext --prefix=/usr/local2 --openssldir=/usr/local2/openssl
make
make test
make install
then to recompile apache with new SNI support I ran the following:
./configure --enable-so --enable-ssl --enable-rewrite --enable-unique-id --with-ssl=/usr/local2/openssl
make
make install
After that when I start Apache: /usr/local/apache2/bin/apachectl -k start I get the following error:
SSLStrictSNIVHostCheck failed; OpenSSL is not built with support for TLS extensions and SNI indication. Refer to the documentation, and build a compatible version of OpenSSL.
Fedora :: Get Openssl To Verify A Certificate?
Jan 8, 2011I am trying to get openssl to verify a certificate. I will walk you through what I have done so far.
1. openssl genrsa -des3 -out connect.mydomain.com.key 2048
2. openssl req -new -key connect.mydomain.com.key -out connect.mydomain.com.csr
3. Bought an SSL from GoDaddy.
4. Submitted my CSR
5. Downloaded sf_bundle.crt (CA File I presume)
6. Downloaded connect.mydomain.com.crt
Now I can do the following: [root@server tls]# openssl verify -CAfile sf_bundle.crt connect.mydomain.com.crt
connect.mydomain.com.crt: OK This is specifying the CAfile.
[Code]...
Ubuntu :: OpenSSL Configuration For Apache 2?
Aug 17, 2011in order to share profiles between a Mahara and a Moodle installation I need to get OpenSSL working.
I've got OpenSSL installed on the server and followed this tutorial. However, I still get an error message saying that either OpenSSL or PHPs support for OpenSSL are missing: Could not generate a new SSL key. Are you sure that both openssl and the PHP module for openssl are installed on this machine?
What would be the next steps to actually set up the Apache server and PHP so they can use OpenSSL? (I've already specified the path to my caconfig.cnf file in Maharas config.php)
Server :: Creating CSR / CRT Files Using OpenSSL
Jul 14, 2010I got an task assigned to me, i have to create new ssl key, csr & crt files using openssl. But the file name must be of this kind (*.aaa.xx.aa). When I tried the file name starting with * its not accepting the file name. But when I tried with the file name starting with . its getting generated.
View 1 Replies View RelatedServer :: LAMPP Saying OpenSSL Not Installed?
Jan 18, 2011I inherited a project that someone built in lampp, and I need create new SSL certs.
So I go to do so and it says that OpenSSL is not installed and to apt-get and install it.(Ubuntu by the way)
So before I did so, I wondered if it would cause any problems...since it was supposed to be part of the lampp stack.