Just got a Dell Inspiron N5030. Internal speaker works. I can make a skype test service with internal speaker device. When I plugged the head phone, the head phone does not work. No problem with the head phone indeed. I have searched the forum for N5030 key word. But never able to find one.
I am using Ubuntu 10.04 LTS
- the Lucid Lynx - released in April 2010 and supported until April 2013.
I'm new to the forums and OpenSuse. I would like to know how to disable my touchpad on my Dell Inspiron N5030? I'm using the gnome edition of OpenSuse.
View 9 Replies View RelatedI have made sure the card is not muted using kmix, alsamixer, and running alsaunmute 0. It was working for some time and just stopped. I am not sure if getting rdesktop to work on the laptop caused the issue or not since that seems to be the last major thing I did. (missing my sipie.py). This is what I am working with:
~]$ uname -a
Linux xxxx.xxx.xxx 2.6.18-128.7.1.el5 #1 SMP Mon Aug 24 08:20:55 EDT 2009 i686 i686 i386 GNU/Linux
~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
[Code].....
The only problem I've had so far seems to be a common one but I haven't found a specific solution for a dell inspiron 700m. I have sound through the headphones but not through the laptop internal speakers. I've played with the alsamixer settings endlessly but no success, and I'm 99% sure that it's not an issue with the hardware or speaker wiring. I suspect I need to add an 'options snd-hda-intel model=xxxxx' line to alsa-base but not sure what argument to use.
[Code]...
How can we get the network drivers for inspiron n5030 using fedora 9Non of the networking devices work (Wired, wireless, broadband),lspci among several lines in the end lists09:00.0 Ethernet controller: Attansic Technology Corp. Unknown device 2062(rev c1)0c:00.0 Netowork controller: Atheros Communications Inc. Unknown device 002b (rev 01)ifconfig lists the lo interface only
View 1 Replies View RelatedI have been using Ubuntu since September of last year (2010) I haven't realized it, but my mic isn't working. I'm am not entirely sure what type of mic I have, but the output of "lspci" are as follows:
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
[Code]....
I have working speakers that I am trying to attach to my Ubuntu Dell computer. It's an older computer, and only has 512 ram, and a 20 gig hard drive right now. When I hooked up the speakers, and everything and try to play a ..... music video, the music plays at a very sped-up rate. The speakers are Altec Lansing speakers. I have tried to find the answer to this problem with no luck. Do I need to do any coding in the terminal? Or is there another problem?
View 8 Replies View RelatedThe network icon and sound icon disappeared from the panel all of sudden one day while i was using ubuntu 9.10 and the network got disconnected. It used to work fine before when i was using ubuntu 9.04 and even after i updated to 9.10, but then that happened. I added the notification area back to the panel but now ubuntu cannot even find any wireless networks. When i connect a LAN cable to my laptop the internet works fine, but the wireless networks area in the network icon is grayed out and it doesn't show any wireless networks. I'm using a Dell Inspiron 600m laptop and my network card is Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05).
View 9 Replies View RelatedI'm running Ubuntu 9.10, Dell Inspiron 1545. I have the NDISwrapper installed, and the driver shows up in "Hardware Drivers" as activated (Broadcom STA wireless driver) it also shows up in "Windows Wireless Drivers" (bcmwl6) but it still won't allow me to connect wirelessly.
View 9 Replies View RelatedI am having trouble in getting the wireless up in Ubunto 10.04. Under Wireless Networks it says "wireless disabled". I have a dual boot with Windows 7, installed Ubunto with the help of Wubi installer. My laptop is Dell Inspiron 1545, with a 64 bit architecture.I have already done checking and enabling the wireless driver by going to System- Administration-Hardware Drivers and choosing Broadcom STA driver.
View 7 Replies View Relatedi am using Ubuntu on my Dell Inspiron N5010.My built webcam is not working what should i do?
View 1 Replies View RelatedI have spent all day trying to wireless network to work on my Dell Inspiron 1440, but no luck.
I followed the guide here: [URL]
Here are the details of my network card:
root@bruparel-Inspiron-1440:/home/bruparel# lspci -n | grep 14e4
0c:00.0 0280: 14e4:4315 (rev 01)
Here are the more verbose details:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
Subsystem: Dell Wireless 1397 WLAN Mini-Card
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at f69fc000 (64-bit, non-prefetchable) [size=16K]
[Code]....
Things seem to install fine, but the wireless network remains unavailable (wireless network is disabled).
If someone can walk me through the trouble-shooting process, I tried the solution suggested in the sticky at the top too but no luck.
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
I'm on a Dell Inspiron 1525 running Arch Linux with an Intel 965 GM video chipset (from dmesg). I'm using the xf86-video-intel driver, and Xorg (using xfce4) works flawlessly, including compositing. Before getting into details about the HDMI, I'd like to ask why I don't gave an xorg.conf.d/10-moniter.conf, it's not there, just evdev, quirks, and synaptics (because I figured that moniter.conf could be modified to include HDMI). So, basically when I'm on my XFCE4 desktop, I plug in the HDMI cable and to the TV, and on windows, it would would work, but on Arch the TV just says: "No input", and my desktop just stays the same, so absolutely nothing happens. If I have it connected upon bootup, the HDMI displays (the BIOS and grub menu on the TV) until I select to boot Arch linux on Grub, then the tv screen goes blank. I've tried Googling this but I got no decent results, just a bunch of random posts of audio not working with Nvidia.
PS - I did dmesg and lspci (with grep HDMI) and no results, so maybe it doesn't even recognize it, but then what do I do? There's obviously Linux support for HDMI...
I just installed Ubuntu 10.04.1 on my Dell Inspiron 1545 laptop, but I can't connected to the Internet with a wired or wireless connection. I have a BT Home Hub 2 wireless router. I can connect to the Internet when running Windows Vista, but not with Ubuntu.
I tried installing the Broadcom STA driver off of the live disk, which initially seemed to work. However, I still couldn't connect to the Internet and when I clicked on System > Administration > Hardware Drivers, there weren't any proprietary drivers to install or that had been installed. Also, when I reboot, Ubuntu tries to connect to my network automatically but always fails. That's what makes me think that a driver has been installed, but just isn't the right one or isn't working.
I am new to Linux. About 72 hours in, and I must say. I am quite impressed. Except for a small issue. I cannot seem to figure out how to get my wireless card working. I have used the bcm43xx technique with no avail. And am working on ndswrapper. The good news is I think I have the .sys file that works. But I don't have the .inf. However any way I could make this work would be great. Below I have posted my lspci stats.
Lspci:
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 03) .....
As the title says the option in the SCREENSAVER(Power Management Preferences)Put display to sleep when inactive for is not working. I have selected 2 minutes, and even after 1 hour it will not shutdown the display.
View 3 Replies View RelatedI installed openSUSE 11.4 in my laptop as dual boot.But wireless drivers are not working.Please give a suggestion to work wifi.
View 3 Replies View RelatedI just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
View 1 Replies View Relatedok basically i have a new dell inspiron n5010 with a broadcom 4313 wifi card. it doesnt work with ubuntu studio 10.10. I have the drivers all installed and it works on ethernet with the broadcom STA proprietry driver. if i disable this driver the eth doesnt work. but the driver shows its working (screenshot-1).
There is no pop up or anything in the task bar for detected wifi. i open the network settings and it shows up with a wifi option but i have to go into properties and manually type in what i have "the_den_meribel". which didn't work. (screenshot-2).
i have tried the other driver broadcom-sta-common and that doesnt make it work either. screenshot-3. i did try to install the "lp-pphhy" or whatever it is (seacrh for firmware-b43 in synaptic).
i have a list of results from what i have typed into the terminal: dell inspiron n5010
Code:
sam@drytopubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
[Code]....
I just installed the 64-bit Kubuntu 11.04 and i've been having some issues getting the wifi to work. At first I went to additional drivers and activated the STA driver and restarted. After restarting when I went into the network manager and any option for wireless was disabled.
[Code]....
I have a problem with my laptop Dell Inspiron 1525 wireless on Jessie Cinnamon.
I have installed the b43 firmware and after that everything seemed working but just for a few seconds.
I have tried to reboot and after that I can't browse the internet just for a few seconds and after that Iceweasel loading and loading and nothing's happening.
I can't surf on the net just with cable but the wifi setup shows everything is okay 95% signal strength and connected.
Also tried reinstall the firmware and reboot and it's all the same after.
I can easily use my wifi with my smartphone too.
I have installed Fedora12 on Dell Inspiron laptop. Here are my key details of my laptop.
<Fn + F4 > ---- For decreasing Brightness
<Fn + F5 > ---- For increasing Brightness
<Fn + F2 > ---- To enable Bluetooth
I am able to enable bluetooth by pressing <Fn + F2>, But I am not able to increase OR decrease brightness of my laptop screen.I have attached keymap of my laptop by the output of
Code:
xmodmap -pke
Please find the attachment keymap.txt.
I can't activate my 5.1 surround. The sound preferences only show the 4.0 option. When I tried using the
Code:
speaker-test -Dplug:surround51 -c6 -l1 -twav.I can only hear the front and rear speakers. Am currently using 10.04. This problem bugged be since 9.04.
Here's my hardware btw:
Code:
card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: STAC92xx Digital [STAC92xx Digital]
Subdevices: 1/1
code....
Tried testing the latest beta... but it still isn't working
I am stuck in 800x576 resolution and don't know how to escape. I've tried changing xorg.conf but that caused my machine to grind to a halt and I had to copy the original .conf file back over before I could launch GNOME again. I've run lspci | grep VGA, and this is what I get:
00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07) When I run xrandr --verbose, I get:
Screen 0: minimum 800 x 576, current 800 x 576, maximum 800 x 576
default connected 800x576+0+0 (0x10 normal (normal) 0mm x 0mm
Identifier: 0x107
Timestamp: 30685
[Code]...
I'm trying to install Photran for Eclipse 3.6. I've managed to get 3.6 and it works but the next step involves choosing a package that I just can't see because my screen resolution is too small.
Can't play midi files on my Dell Inspiron 1300. Do I need another application?
View 4 Replies View RelatedI've just installed brand new Debian 6 on an oldish Dell Inspiron 5160 laptop. This features an XGI Volari XP5 video card, which I can see reported in /var/log/Xorg.0.log.
When Debian boots it will only run in command line mode. Running startx hangs up the whole system and just displays a black screen with a few vertical stripes in different colours of dark green.
the default vesa driver for X.org doesn't play very well with the XGI video card.
I've tried running
X -configure
then
X -config /root/xorg.conf.new
This correctly detects the XGI Volari XP5 card (if you look through the xorg.conf) but running the second X command still hangs up the system.
X runs fine under Knoppix, but most recent Ubuntu distros I've tried actually hung up after the initial text-based startup section, so presumably died as soon as X started up. Debian's graphical installer worked fine, however.
My brother has just installed 9.10 on his Inspiron 6400 and would like to have a dual screen setup using both the laptop display and a flatscreen attached to the VGA socket. Using the standard display options, the two displays are recognised and when the 'mirror screens' option is disabled then settings applied it works to the extent of allowing the cursor to move between the two monitors; however the monitors display nothing except a black screen and the cursor.
I've updated everything to the current version, had a look for restricted drivers (none are suggested by the GUI tool thing) and checked both displays work (both independently and as mirrored). I also had a look for an xorg.conf to poke around in but there wasn't one there.
I am trying to use JACK for some audio applications, but I have had no success until now I'am using Ubuntu 10.04 on my Dell Inspiron 6400. Kernel 2.6.32-33.
The following is the QjackCtl log:
p, li { white-space: pre-wrap; } 14:38:48.196 Steckfeld deaktiviert.
14:38:48.377 Statistik zurckgesetzt.
[code]....
I just upgraded to ubuntu 10.04 and everything is ok except my USB Logitech Headset. The problem is that volume of the device is very low and I can't hear the music or any sound like I use to heard. Even if I increase the volume up to 100%, I still hearing the sound with a very low volume. But if I use the analog output of my sound card I can hear very well. I remember that i used to have this problem in ubuntu 9.10 but I fixed with a script that I found it in this forum, but I can't find it again.
:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:0a01 Logitech, Inc. USB Headset
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04fc:0c25 Sunplus Technology Co., Ltd SATALink SPIF225A
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub