I have a issue in that my 30gb creative zen is showing up fine as a media device, I can delete and add files. It is showing up as z 3.9gp partition. I formatted inside the Zen I formatted inside Windows Vista It showed 28,800ish megs free and it still showed up at a 3.9 gig partition There is no .trash folder How can I fix this? Qlix installed don't know if that matters.
View 1 RepliesI have been trying to use my Creative Zen Vision:M with OpenSuse for a while now. I can connect it fine and the system can see that it's there and everything like that and it even recharges the battery which is a great bonus. And while I can drag and drop folders with music files onto it, it won't update the playlist, in other words it knows there a files on the player but nothing else. So I usually have connect the Zen to my Windows machine drag them out of the player and drag the back in.
View 4 Replies View Relatedyesterday I upgraded of my ubuntu release from 10.04 to 10.10 and now, when I plug my mp3 creative zen player it doesn't work.The same player works very well with 10.04 and I can upload my mp3s directly from rythmnbox using drag&drop.Here my /var/log/syslog
Code:
Oct 20 15:58:20 tarini-laptop kernel: [25042.100344] hub 4-0:1.0: unable to enumerate USB device on port 2
Oct 20 15:58:38 tarini-laptop kernel: [25059.970030] usb 1-1: new high speed USB device using ehci_hcd and address 16
Oct 20 15:58:38 tarini-laptop kernel: [25060.102634] usb 1-1: device descriptor read/64, error -71[code].....
I am running ubuntu 10.04 with the fglrx driver installed with apt-get. I have an ATI Radeon HD AGP with 512MB of video ram. My bios window size is 64MB. The Xorg.0.log file shows that 512MB is recognized. I also tried checking the /proc/mtrr file and it shows two values one I believe is my ram size which looks to be correct at 1.5GB the other is 512MB which I think is my video ram size, but when I do an lspci -v the video ram size shows 256MB. I am trying to run Doom 3 and it only allows me to use 256MB of memory.
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux Merlin 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=b72f83f8-a868-4098-9d87-2a082f698167 ro quiet splash
Build Date: 23 April 2010 05:11:50PM .....
while i got decent I/O throughput, my soundcard Creative X-Fi ceased to exist. I can't see that its support was stripped out of the kernel. How can i get my music back?
View 3 Replies View RelatedThe new 270.18 driver: "Added a new X configuration option "3DVisionDisplayType" to specify the display type when NVIDIA 3D Vision is enabled with a non 3D Vision ready display." Does this mean 3D vision can be enabled now? How would one do this?
View 3 Replies View RelatedWhat software can be used to make a 'creative' of certain size, in this case 260 x 125
View 1 Replies View RelatedI am running Xubuntu Lucid 10.04 on a Sony Vaio. I recently dropped $100 on a Logitech QuickCam Vision Pro for Mac, on the recommendation on the ubuntu wiki [URL].. that it would "work perfectly" in Skype. In Skype, it did nothing. No Audio, no video, light wouldn't even come on. Essentially a $100 dollar paperweight. I really think someone should correct this misleading information on the wiki.
I followed the kludge listed here [URL].. to get the video to work. By executing Skype with the shell script listed in the first post, I could get the video test to work, but no audio, and when I tried to call someone, when I turned on video, Skype quit suddenly. For the record, yes, I unmuted the device in the Sound Mixer in the top right corner.
Later on, I tested it with guvcview, and the cam worked perfectly in that program. It's only Skype that doesn't know what to do with it. When I execute Skype in Terminal I get the following output repeating over and over again:
Code:
X Error, request 20, minor 0, error code 3 BadWindow (invalid Window parameter)
X Error, request 15, minor 0, error code 3 BadWindow (invalid Window parameter)
libv4l2: error setting pixformat: Input/output error
libv4l2: error setting pixformat: Input/output error
[Code]...
I've got my data disk partition like this:
Filesystem Size Used Avail Use% Mounted on
/dev/sda5 256G 74G 169G 31% /data
When i run the command du -hs * on /data it tells me I used 538GB. How is that possible? Is it possible to get the right amount?
I have benn using ubuntu on an old laptop to run a samba server and a torrent server and it has been working fine till a few days ago when it stopped letting me write any files to the disk, So i tried deleting some of the files i no longer needed to free up some space and the disk usage didnt decrease so i checked it out using the disk usage analyzer and it says its full but i know for sure its not.
View 9 Replies View Relateda client brought in an 160GB external HDD and wanted to get the files off it, there appeared to be no partitions on the disk but i thought it may have been formatted to use the whole disk. I tried to mount it as the various FS types the client thought it may have been to no avail.
I ran testdisk on it which told me that it previously had a mac partition table and a 210GB partition on it (which is larger than the disk) could anyone enlighten me as to whether or not this is even possible, and if so how could i retrieve the data?
Just updated to natty last night, still coming to grips with Unity, but the date format for Sydney Australia shows as Year-Month-Day instead of Day-Month-Year, tried changing it manually, but it just changes it's self back to what it was. Still coming to grips with the launcher, but do not like the black back ground used in the dash, would like to be able to change it. Would also like to make the icons in the launcher smaller than 32.
View 3 Replies View Relatedone of them is a TV with an HDMI input. The login screen shows up on the tv, so if someone is watching a movie, I have to pause it to switch inputs and login. Other than that, everything is fine. How do I get the login screen to show up on the main monitor?
View 1 Replies View RelatedMy ~/Desktop is generally kept empty.
Yesterday on start resume from hibernate, it looked as if my encrypted home directory was unmounted; or at least instead of my $HOME contents I got a bunch of files related to this.
I rebooted the system, and since then my desktop has been rendering icons for every file in my home directory, but not updating the icons until the next reboot, if I change anything in $HOME while it is running.
I opened the gconf-editor and checked: the box for using the home dir as the desktop is not checked. I even tried toggling it and the option that controls drawing the desktop on/off in every possible combination. Nadda. The only thing that works is turning off drawing the desktop.
I have a 16GB Corsair Flash Voyager GT pen drive. It worked fine for some time but recently, I am not sure for what reason, it is showing to have only 7.56GB of space.
Is it possible to fix this or is it the pen drive physically damaged?
When I boot my computer (Ubuntu 9.10) /etc/resolv.conf is written as:# Generated by Connection Managernameserver 10.33.8.11 10.33.4.136However, if I try to do anything from the command line, I get an error like:host: parse of /etc/resolv.conf failedI then need to edit /etc/resolv.conf to:
# Generated by Connection Manager
nameserver 10.33.8.11
nameserver 10.33.4.136
[code]....
Here is quick fix I did for HP Proliant servers where landscape shows wrong temperature eg:
root ~ # landscape-sysinfo
System load: 0.12 Temperature: 8 C <----- WTF
Usage of /: 0.2% of 808.13GB Processes: 214
[code]....
I'm not too sure if this is the right topic to post in but if it isn't please move it to the correct topic. I recently opened some ports for my Playstation 3 and the connection test on the PS3 tells me that the ports are open . But when I execute this command
nmap -p 0-60000 192.168.1.5 I get this
Quote:
Starting Nmap 5.21 ( http://nmap.org ) at 2010-10-16 20:54 AUS Eastern Daylight
Time Nmap scan report for PS3 (192.168.1.5)
Host is up (0.00063s latency).
All 60001 scanned ports on PS3 (192.168.1.5) are closed
MAC Address: **:**:**:**:**:** (Sony Computer Entertainment)
Nmap done: 1 IP address (1 host up) scanned in 4.12 seconds
I could be executing the wrong command or something but I have read through the manual and couldn't find anything that helped. I have tried this command on other machines that I have opened ports for and get similar results except for a few Ephemeral ports (80,443 etc.) which also makes me wonder why these aren't listed as open on the PS3?
Iam comparing 2 filesystem using the below command.rsync -navrz --exclude=logs/* /opt/otm/ glrrd@105.78.7.100:/opt/otm/The output showing the files which are same in size and timestamp that are to be sync.Iam using rsync 2.6.3 version so i dont have itemize changes option to debug the problem.Is there anyway i can find the how rsync is finding the difference between the 2 filesytemEx: filesystem1
-rw-rw-r-- 1 glog glog 39132 Nov 26 2009 FinJ-code_2003-10-22_12h17_CEST+0200.jar
-rw-rw-r-- 1 glog glog 39132 Nov 26 2009 finj.jar
-rw-rw-r-- 1 glog glog 954987 Nov 26 2009 jakarta-taglibs-standard-1.1.2.zip
[code]....
It's a minor problem, but when I run Evolution the "New Mail" button is way bigger than all the other buttons
View 1 Replies View RelatedIt just happened for the second time some minutes ago (first time was yesterday): the update-manager window reported that 7MB needed to be download, but after clicking Install Updates 17.3MB was downloaded...It's a know issue in 10.10?
View 3 Replies View RelatedThe image attached explain best this issue.
Usually this HTML menu fits fine. I just installed Kubuntu 10.04 and I have this bad behavior. I am sure that is only in my local environment, not in other computers (nor page zoom involved).
Looks the same in firefox, chrome, konqueror...
[URl]also I wonder why there is such a gap between the size of the files (7 GB) and their size on the disc (44 GB)
View 13 Replies View RelatedOpenSUSE 11.4 / kernel 2.6.37.1-1.2-desktop / Gnome 2.32.1
Video: Intel 945G (on motherboard)
Monitor: Acer AL1716 @ 1024x768
Driver: whatever 11.4 auto-installed for the card
Having a strange video problem after recently up-ing to 11.4. When new windows open maximized, they are opening at the wrong size (slightly too small) resulting in a distorted view including 'broken' fonts (missing pixels). If I unmaximize the new window, and then re-maximize it, it now maximizes to the correct size and everything is fine.
I installed opensuse 11.2 on ASUS R2E nicely It have a 7" touchscreen and works nice. The screen is correctly settled to 800x480 on boot however after a S2RAM it is reinitialized as 800x600. I made an xorg.conf with only one fixed mode on 800x480 but daesn't seems to be considered on resume. After cold boot sax2 get the right size (800x480) and after resume 800x600 The video chipset is intel 945 GM.
May this be related to hardware reinitialization ? How to re-initialize X on resume ?
I had a drive with a partition layout like so:
~50gig Windows 7 - NTFS
~100gig Ubuntu - EXT3
~100gig Snow Leopard - HFS+
~100gig Extended Partition
-- ~100gig Swap Disk - exFat
I wanted to delete the Snow Leopard partition and format the Swap Disk partition to something else. exFat was causing major file size bloat on small files. QT sdk bloated to like 11 gigs or something ridiculous like that. Anyways, I loaded up an Ubuntu 10.04 LTS live cd and gparted then deleted the Snow Leopard partition. Gparted said "Mission Accomplished" and tried to rescan the drive, but never found it. At this point I restarted the computer, a dell laptop, which didn't boot with an unable to find a bootable device error. The ubuntu live cd doesn't see the drive anymore. gparted scans for drives indefinitely and fdisk -l has no output.
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
So I tried adding a new, 2nd hard drive to my Ubuntu 9.04 desktop for some additional storage and only managed to kill my system so that it won't boot up anymore (I just get a blinking cursor after the BIOS does its thing).I could sure use a little help getting back to a functioning system, and then adding the second drive. I tried following the instructions from this link to add the 2nd drive:
(So the forum rules won't let me post the link, neato. Here it is with spaces added):
h t t p s : / / h e l p . u b u n t u . c o m / c o m m u n i t y / I n s t a l l i n g A N e w H a r d D r i v e
[code]....
I installed gnomad2 on my ubuntu 10.10 system but it won't mount my Creative Zen X-Fi. Ubuntu itself recognizes it but Gnomad2 doesn't. The error message is this...
Device 0 (VID=041e and PID=4162) is a Creative ZEN X-Fi.
PTP_ERROR_IO: Trying again after re-initializing USB interface
Queried Creative ZEN X-Fi
Segmentation fault
I've been running Debian for a while, and now have the chance to do some enterprise-level experimentation. I stumbled across a very cheap EMC Clariion CX300 fibre RAID unit on eBay with 10 disks (£90!), so I snapped it up with a fibre HBA. It's not a SAN, technically a DAS in its current configuration. I'd like to know how hard it is to set up one of these as an actual disk device in Debian.I tried installing the HBA (an Agilent Tachyon XL2 PCI-X card, 32 and 64-bit modes) in my current 'live' server (a Celeron 1.2GHz-based machine), but while Debian detected it as a FC controller card, mapping the LUNs within Navisphere on the CX to the host caused nothing (obvious) to show up in the OS. From what I've read about setting up SANs (not DASs, there seems to be precious little info on setting up these), there's firmware involved with the card, and there are no references to getting a Tachyon running under Linux.
I also snagged a good deal on a PowerEdge 1850 server, but as it's the PCI-Express version, the Tachyon won't fit, so I'm considering buying a PCI-E HBA. I found a QLogic QLE2460 for a good price, but I'm hesitant to buy it, in case I still can't get Debian to see the disks. I'd most like to have the device connected to the PowerEdge instead of the Celeron machine. Have I missed a step in the configuration, or is there anything I can do to test if the system is working as it should be? The units we use at work are much simpler: set the RAIDs up, map the host LUNs and the disk shows up in Windows. I'm also sure I've set everything up correctly on the CX, as the same LUN is available to Windows. Just need to get Debian to see something on the end of the HBA!System Specs:Live Server: Celeron 1.2GHz, 512MB RAM, Intel D815EEA2 board, SATA soft-RAID hard drives, PCI Gb Ethernet and USB2.0, Agilent Tachyon XL2 PCI-X FC HBA, Debian 6.0.1PowerEdge 1850: 2x 3.2GHz Xeons, 6GB RAM, SCSI RAID disks, PCI-E riser, planned QLogic QLE2460 PCI-E HBARAID Unit: EMC Clariion CX300, 10x 146GB FC disks, 2Gbps Fibre-channel interfaceThe PowerEdge is the planned replacement for the Celeron machine, which started life as my experimentation box and became my personal live server. Storage is holding it back, so I'd love to add a further five disks to the CX and have nearly 2TB of RAID-protected storage.