It just happened for the second time some minutes ago (first time was yesterday): the update-manager window reported that 7MB needed to be download, but after clicking Install Updates 17.3MB was downloaded...It's a know issue in 10.10?
View 3 Replies
I am running ubuntu 10.04 with the fglrx driver installed with apt-get. I have an ATI Radeon HD AGP with 512MB of video ram. My bios window size is 64MB. The Xorg.0.log file shows that 512MB is recognized. I also tried checking the /proc/mtrr file and it shows two values one I believe is my ram size which looks to be correct at 1.5GB the other is 512MB which I think is my video ram size, but when I do an lspci -v the video ram size shows 256MB. I am trying to run Doom 3 and it only allows me to use 256MB of memory.
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-25-server i686 Ubuntu
Current Operating System: Linux Merlin 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 22:02:19 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=b72f83f8-a868-4098-9d87-2a082f698167 ro quiet splash
Build Date: 23 April 2010 05:11:50PM .....
What does one do when Update Manager squawks then reports this:installArchives() failed:
Extracting templates from packages: 71%
Extracting templates from packages: 100%
Preconfiguring packages ...
[code]....
When I try to update my software through update manager, I get this error:
W: Failed to fetch [URL] Size mismatch
As a side note, when I enter Update Manager, it does not show 10.10 as an available update. I have checked my settings. I am quite kurfluddled by all of this.
I've a physical machine with FC9 running vmware server 1.0.6 with 2 virtual machines. Each virtual machine is also running FC9. Everything was running smoothly until one day, one virtual machine stop. I've checked /var/log/messages of that machine and it says:
Code:
"no space left on device"
.
I try to create a file
Code:
touch dd
and the answer is the same.
The odd thing about all this is that the machine (both virtual and physical) have enough space left. This is the space available reported by df -h. Physical machine
Code:
[root@halwifi hotspot]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
228G 38G 179G 18% /
/dev/sda1 190M 19M 162M 11% /boot
tmpfs 1010M 96K 1010M 1% /dev/shm
and the Virtual Machine
Code:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
8.7G 3.6G 4.7G 44% /
/dev/sda1 190M 19M 162M 11% /boot
tmpfs 379M 0 379M 0% /dev/shm
Every time I try to do something, I always get: "no space left on device".
I am having issues trying to compile the alsa-linuxtant module and I am getting errors about not being able to find some files and the source needing to be reconfigured. Anyway the developers told me to try compiling on a pristine source to see if I could compile that way. When I went looking at kernel.org I did not find a 2.6.32-5 version. So I did some checking and to see just what version I have.
$ uname -r
2.6.32-5-amd64
$ dpkg --list | grep linux-image
ii linux-image-2.6-amd 64 2.6.32+27 Linux 2.6 for 64-bit PCs (meta-package)
ii linux-image-2.6.26-2-amd64 2.6.26-24 Linux 2.6.26 image on AMD64
ii linux-image-2.6.32-5-amd64 2.6.32-15 Linux 2.6.32 for 64-bit PCs
So the actual package that is installed is 2.6.32-15 but uname -r reports 2.6.32-5 as the kernel version.
I did apply the updates on 11.1 32bit and upgraded the kernel from 2.6.27.45 to 2.6.27.56.
Now:
Code:
> uname -a
Linux myhost 2.6.27.45-0.1-default #1 SMP 2010-12-01 16:57:58 +0100 i686 i686 i386 GNU/Linux
but:
Code:
> cat /proc/version
Linux version 2.6.27.56-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2010-12-01 16:57:58 +0100
I have been asked to investigate some of our servers that run tripwire 2.3.0 on Red Hat Linux Advanced Server release 2.1AS (Pensacola)
We have the reports emailed to us using cron and twprint -m r -r report -t 4, it has been growing steadily and today it was 9mb It seems the database records go back to before 2004 and are being compared against today's files.
I really need to be informed what needs to be done to tripwire to keep it serviced through cron. I have tried to google this but could not find any information that seemed to answer my questions.
Looking at the following guide url step 6 talks about "Updating the Database after an Integrity Check" using
Code:
# tripwire --update --twrfile /var/lib/tripwire/report/<name>.twr Should I be using this command or should I be re-creating the db every month or so and using the #tripwire -init?
Extract from report -
Quote:
-------------------------------------------------------------------------------
Section: Unix File System
-------------------------------------------------------------------------------
Rule Name Severity Level Added Removed
Modified
--------- -------------- ----- ------- --------
Invariant Directories 66 0 0 0
code....
I need to understand how to change the expected to the observed so the db will be up to date.
I would also like some of the rules explained:What does removed and added mean? Is it removed as it has not changed and added if it finds a new one that has?
Code:
-------------------------------------------------------------------------------
Rule Name: System boot changes (/lib/modules)
Severity Level: 100
-------------------------------------------------------------------------------
----------------------------------------
Added Objects: 3075
----------------------------------------
code....
E: Type 'nchpad.net/ubuntu-wine/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-maverick.list E: The list of sources could not be read. The above is the console output when i type sudo apt-get update Update manager throws the same error so now I can't install or update software .
View 2 Replies View RelatedIt started with Update Manager constantly recycling and not updating. When it starts it shows 295 files and 308MB waiting to download. When I click on 'Install Updates' it appears to go through the process, and then presents me with the same 'waiting to install' window again - and again, and again - in fact as many times as I care to click the 'Install Updates' button. No error messages appear. The 'Settings' button produces the same apparent process as the 'Install Updates' button, but doesn't present me with any other screen.
I've tried all the solutions I could find on these forums and nothing works. The sudo suggestions for Terminal usually produce error codes. adjusting a line in the 'hosts' file. When I tried this I was presented with the obstacle of not having access to the read-only file, and no matter how much I searched I couldn't find how to gain access . While investigating all these possible solutions, I was directed in turn to the Software Sources and Synaptic Package Manager applications, but when I attempted to start them, 'Starting Administrative Application' appeared briefly on the taskbar - and then disappeared!
After a fresh install of Ubuntu 9.10-64bit I don't have Hardware Manager, Update Manager or Software Resources just to name a few.I tried sudo apt-get update & sudo apt-get upgrade & everything is up to date.
View 9 Replies View RelatedI received this: 'E:Type 'ain' is not known on line 3 in source list /etc/apt/sources.list.d/psyke83-ppa-natty.list'
Update Manager and Packet Manager do not work.
Ubuntu Software Center is also affected.
I am trying to update using Update Manager and I get this message: Failed to fetch "Failed to fetch [URL]..404 Not Found" My system is 64 days out of date now.
I have looked elsewhere for an answer and some others have had similar problems, but I have not found a reason for it happening, nor an answer. I wonder if anyone can help me please. I have been using Ubuntu for several months, can use the Terminal if I have the right commands to issue, but beyond that have limited knowledge of the system.
having had problems with getting grub2 to work on dual HDD setup...despite the most excellent advice on the forum i took the plunge and installed 10.10 from update manager within 10.04..... bingo fixed grub and now have dual boot again. but the update manager and synaptic package don't work because of libedata-cal1.2-6 file that remains..following other advice on the forum Advice gratefully received, how can i force an unistall of this package
mark@studypc:~$ sudo apt-get -f remove
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
Update Manager is inviting me to update from my Maverick Meerkat to Natty. Is this a good idea?
View 7 Replies View RelatedI started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies View RelatedI just installed ubuntu 10.10, and im triying to update, when i uncheck the packages that i dont want and click on the "install updates" button in the update manager, the update manager check it again and download the packages that i dont want
View 1 Replies View RelatedI am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies View RelatedI'm having trouble updating. Using the update manager fails and I see the message:dpkg: parse error, in file '/var/lib/dpkg/available' near line 23288 package libbonoboui2-common': 'Conflicts' field, reference to 'libbonobous2-0': version contains ' '
I've tried
sudo dpkg --configure -a
and
[code]....
every time i try to update my computer i get this message administrator@desktop:~$ sudo aptitude upgrade W: The "upgrade" command is deprecated; use "safe-upgrade" instead. Reading package lists.Done Building dependency tree Reading state information. Done Reading extended state information Initializing package states.. No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used.
[Code]...
When i do update from Terminal, i dont get all updates which are in Update manager. Why?
Code:
sudo apt-get update
sudo apt-get upgrade
I've run the command "sudo apt-get update" from terminal, showing no update to do.Then I've run the update manager (System-Administration-Update Manager) and it has shown an update (adobe flash).I thought that "apt-get update" command and update manager were the same... Why do I have different results ? Is something missing in my "sources.list" file ?
View 4 Replies View RelatedNormally Update Manager always finds the update to the next version of Ubuntu. It still hasn't given me any notion whatoever. I allready changed the settings from regular to LTS, but nothing changes. There are updates to the kernel, but I cannot download them, so I'm kinda stuck here.
View 5 Replies View RelatedI upgraded from 10.10 to 11.04 and when i try to check for updates in the update manager it says:
W:Failed to fetch http://ppa.launchpad.net/and471/kaza...source/Sources 404 Not Found
, W:Failed to fetch http://ppa.launchpad.net/and471/kaza...amd64/Packages 404 Not Found
[Code].....
Using 11.04. After an update by Update Manager, everything seems fine. but after I rebooted it fails to reach the log in screen. It shows Ubuntu is booting up, after that, it seems it has crash, though I managed to boot it up and go into my desktop in low graphics mode.As I'm new to Ubuntu,
View 4 Replies View RelatedI just updated my server from Ubuntu 8.04 to 10.04 and now it cannot go past grub, at boot time, it would "give up waiting for root device", asking me to check whether I gave the right "root=..." or if I should increase the "rootdelay=..." in the command line argument and end up with the initramfs.
The machine is a Dell Poweredge 2900 with a HW RAID controller (I hope that should not matter, but just in case...). I tried to follow the instructions there to make sure grub is setup correctly, but without any luck.
Below is the output from the bootinfoscript (while running on the LiveCD). Anybody has any idea what can be the problem or what I could do to debug this ? I am running out of ideas.
[Code]...
i have a healthy and fully operational mobile broadband connection yet i cannot update my Ubuntu 9.10 computer. every time i try to update i receive an error message with the title: "could not download all repository indexes", the information the dialog box contains is as follows
GPG error: http://flomertens.keo.in edgy Release: The following signatures were invalid: NODATA 1 NODATA 2GPG error: http://ntfs-3g.sitesweetsite.info edgy Release: The following signatures were invalid: NODATA 1 NODATA 2Failed to fetch http://flomertens.keo.in/ubuntu/dist...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
[code]....
The option to update to 10.10 isn't appearing in Update Manager... Is it too early, or am I doing something wrong?
View 2 Replies View Relatedim on mint 10 and when I run Update Manager i get this
Code:
W: GPG error: http://archive.canonical.com maverick Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: http://security.ubuntu.com maverick-security Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 40976EAF437D05B5
[code]....
Can you update to 10.4 through the Update Manager GUI in Gnome?
View 4 Replies View Related
