Ubuntu Multimedia :: Cannot Get Hauppauge Pvr- 150 Working In 10.10

Oct 24, 2010

I tried mythtv and I can't seem to figure it out. The only guides I can seem to find are for 6.06.

View 1 Replies


ADVERTISEMENT

Ubuntu Multimedia :: MythTV And Hauppauge / HVR-1250 Not Working?

May 25, 2011

I've been doing alot of reading but i cant seem to get my HVR-1250 card working with mythTV, my system see's it but i cant get myth TV to recognize it? it doesnt come up in the "probed info" in the backend, do i have to just plug in the right info and not worry about that or what?
sudo lshw -C multimedia output:

Code:
*-multimedia
description: Multimedia video controller
product: Hauppauge Inc. HDPVR-1250 model 1196
vendor: Conexant Systems, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pciexpress pm vpd msi bus_master cap_list
configuration: driver=cx23885 latency=0
resources: irq:17 memory:fe800000-fe9fffff
ubuntu 10.04 32 bit
AMD Atholon dual core

View 4 Replies View Related

Hardware :: Getting Analog Video Working On A Hauppauge HVR-1800?

Nov 5, 2010

I picked up a Hauppauge WinTV HVR-1800 PCIe TV tuner a few days ago. Digital TV worked fine right out of the box (after setting up the firmware), but I have not been able to get analog video to work at all.If I run mplayer, xawtv or tvtime using /dev/video1 (yes, that is the correct devnode, video0 is a different card in my rig), So, has anyone RECENTLY gotten analog capture working on this card?

View 5 Replies View Related

Ubuntu :: Hauppauge WinTV IR Modules Broken In Natty - Previously Working In 10.10

Aug 7, 2011

I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.

I have a Hauppauge WinTV card (Bt87 (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.10 and LIRC. I recently moved over to 11.04, copied my LIRC config files over (hardware.conf, lircd.conf, lircmd.conf, etc), and received the error couldn't find any node at /sys/class/rc/rc*

The modules I had previously been successful with were: lirc_dev & lirc_i2c, as is apropriate for my speific card.

I then learned that Natty incorporated a lot of RC elements in to the kernel, and tried following:[url]

Which suggested removing lirc. At this point, ir-keytable also gives the same error about no node at /sys/class/rc/rc*

I think that I am having a problem with the correct driver being loaded for my card. When I look at a dmesg, the relevant section is: (note: I'm not sure if this dmesg was from before or after I uninstalled LIRC and just tried keytables)

Code:

The 3rd last line makes it seem that the IR capabilities have been recognized further confusing me as to why no /sys/class/rc/rc* has been registered. I've attached an unedited copy of my proc/bus/pci/devices, and below is my lsmod.

Code:

View 1 Replies View Related

Ubuntu Multimedia :: No Hauppauge Capture Through VLC (WAH)

Apr 28, 2010

I'm just not getting anywhere here after 12 - 15 hours of googling last 3 days.I'm linked out, and linked back, almost into a do-loop, just like a boomerang, and still no vids...

View 2 Replies View Related

Ubuntu Multimedia :: Getting Hauppauge PVR 1600 To Work In 9.1?

Apr 27, 2010

I've followed instructions here upto the point for the Startup Script for Analog Tuner the script provided does not run (v4l2-ctl seems to be depriciated?) In any case the scan for digital channels is not finding anything, I wasn't able to scan for analog channels. When I do something like cat dev/video0 | mplayer All I see is static. I've followed the instructions and I didn't get any obvious error messages. I'm completely lost. I know the tuner works, I've tested in in Windows 7. I've tried connecting the coaxial cable directly to the tuner's TV outlet, to the ATSC outlet, I've tried connecting the set-top box out coax to the TV, and ATSC outlets to no avail.

View 1 Replies View Related

Ubuntu Multimedia :: App To Watch Tv Over Hauppauge HVR-1800?

Jun 15, 2010

what can I use to watch TV? Obviously in Windows I used Windows Media Center. What can I use while in linux? I want to run Ubuntu, not Mythbuntu.

View 1 Replies View Related

Ubuntu Multimedia :: Hauppauge Remote Is Sending Key Presses

May 5, 2010

I've got a strange problem with my Hauppauge card; I've just undertaken a clean install of Mythbuntu 10.04, and the built in Hauppauge remote for my Nova S2 HD card is intercepting remote signals from the number and direction keys and sending them as keypresses to the terminal - even when lirc isn't running.I didn't have this issue under 9.04 - but it seems that whatever is intercepting the IR signal is preventing LIRC from getting a look-in as it makes no difference whether lirc is running or not.I found this thread: URL... but the link to the explanation is dead and my attempts to blacklist lirc_i2c and gpio_keys have made no difference.

View 4 Replies View Related

Ubuntu Multimedia :: Hauppauge WinTV-HVR 1110 Won't Work

Jun 27, 2010

I bought this tv card because it was listed as working 'out-of-the-box'. Well, it didn't for me. I've googled and forummed for 3 days, tried all the fixes and nothing works.

View 1 Replies View Related

Ubuntu Multimedia :: How To Enable Your Hauppauge 1250 Tv Card

Dec 18, 2010

This is a writeup to help you enable your Hauppauge 1250 tv tuner card so you can use it with programs such as Mythtv. This will enable multiple cards. I am assuming your card isn't working "out of the box". You can check if it is recognized in the OS by following the instructions in "How to tell if the TV card is recognized" below.

In linux land, the 1250 is not just a 1250 but can be a variety of designations. I own older 1250's which are listed as 1270's. My newer cards are listed as 1255's. These cards usually don't work "out of the box" with linux. You have learn the ropes and enable them yourself. You have to have time on your hands and be a glutton for punishment when it comes to setting up linux but a stable, well running system is worth it. If you need everything done for you and want it "out of the box", you might as well ride back to Bill Gates' Boneless Chicken Ranch.

First off, here is an updated cardlist for the cx23885 driver that is used with the 1250 amongst other tuner cards:

[Code]...

View 9 Replies View Related

Ubuntu Multimedia :: Mythtv Analog Hauppauge 1250?

May 4, 2011

I've looked everywhere for this and I can't find an answer. I've got a hauppauge wintv-1250 card; ubuntu and mythtv recognize it OOTB. The dvb digital tuner portion of this card works great. I had quite a time figuring out how to set it up, but it all works pretty good now. nyway, the only problem is that I need to record 2 sources: 1 is RF, the other is from an analog cable box. So, I figured I should be able to record analog video from the s-video input. Is this possible with mythtv, and if so, how? I could watch it in windows with the software that came with the card, so I know it's possible, but I'd rather avoid windows if I can.

View 1 Replies View Related

OpenSUSE Multimedia :: Struggling With Hauppauge HVR-1300

Mar 7, 2011

I recently upgraded my old Hauppauge TV Card (BT878) with a HVR-1300. Whilst the older card worked OK, I am struggling to get the new card to work, despite it seemingly having installed OK in YaST.

View 2 Replies View Related

Ubuntu Multimedia :: Get Hauppauge USB Live 2 Video Grabber To Work Under 10.04?

Nov 4, 2010

I've been trying to get my Hauppauge USB Live 2 video grabber to work under Ubuntu 10.04. I have installed the drivers, and using TVTime I get a perfect picture - but no sound, and also I can't record with it. I have found a guide on how to get it with sound using MythTV, but it seems I fail at setting it up. It tells me it couldn't find the backend server, but it's running in my terminal.

View 1 Replies View Related

OpenSUSE Multimedia :: Ripping VHS Tapes To Disk Using Hauppauge PVR350?

Sep 3, 2011

I have a physical storage problem and want to put my VHS tapes onto disk. I have an unused Hauppauge WinTV-PVR350 which I understand should do the job but can I do it using Linux? I seek some pointers on what program to use, how to do it and tag the resulting files and help installing my Hauppauge card and any driver if required. I have openSUSE 11.4 (64bit) installed using KDE desktop.

View 7 Replies View Related

Ubuntu :: Unable To Get The Hauppauge WinTV 900 Hybrid

Jan 11, 2010

I can not get my usb dvb-t sick working. It is a hauppauge WinTV-HVR 900 hybrid TV stick.
The number on the backside is: M/R: 65018/BC20 Some time ago I read somewhere that this model was supposed to work with ubuntu 9.10. [URL] it is possible to make it work since the poster appears to be using the same model as I do.But I still have trouble setting it up.

View 1 Replies View Related

Software :: Using Hauppauge 1212 HD-PVR?

Sep 24, 2010

I have an HD-PVR that I'd like to use to strictly grab programs off my DirecTV HR24 - football/hoops, concerts, etc. The only machine I have that runs windows is my dual-boot laptop (Vista/Ubuntu 10.04). I'm currently using that and a windows program called Arcsoft TME. However, I'd like to be able to do this with my Ubuntu desktop PC which would be permanently connected to the HR24.

Since (stable) Linux drivers don't seem to be currently available to capture from the 1212, is it worth installing WINE and running TME under that? My goal is to make DVDs and delete the programs from the HR22.

View 1 Replies View Related

Ubuntu :: Hauppauge HVR-2250 - Watch And Record Tv On Computer

Jun 1, 2010

I just got a Hauppague HVR-2250 in the hopes of being able to watch and record tv on my computer. I followed this guide to install the drivers: [URL] It seems to have installed alright I cannot tell if it worked. I am not using MythTV, nor am I interested in MythTV. I just want a simple application to watch ATSC channels. Me-TV seems like an application that fits the bill. It says there are no digital tuners detected though. I don't know if the drivers did not install or if the card isn't supported by the application.

View 3 Replies View Related

Fedora Hardware :: Hauppauge 1600 Driver Seems Unfixable?

Dec 19, 2010

After a massive headache, it seems that driver developers have given up on drivers for the Hauppauge HVT-1600 [URL].. In their current state, the drivers can't get proper sound out of the card, and they can't figure it out.

First, does anyone know is this true? Second, can someone recommend what the best supported tuner card for linux is? My main goal is to record video coming over cable in the US. I thought the 1600 was it, but I guess I was wrong. PS, feel free to point me a ta page that has this info. I can't find one that shows card comparisons (or recommendations).

View 5 Replies View Related

Fedora Hardware :: Unable To Use 14 And Hauppauge WinTV-HVR2200

Apr 12, 2011

I just put Hauppauge WinTV-HVR2200 device to my system, however I can't get it working

Code:

$ lspci -s 03:00 -vvv
03:00.0 Multimedia controller: Philips Semiconductors Device 7164 (rev 81)
Subsystem: Hauppauge computer works Inc. Device 8900
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

[code]...

View 4 Replies View Related

Hardware :: Hauppauge WinTV PVR-150 Card Recognized As Scanner?

Jul 20, 2009

Upgraded system so I could store more recorded video. Now system identifies the Hauppauge WinTV PVR-150 card as a scanner. I have the original setup disk from Hauppauge but it is not Linux compatable. Running: Ubuntu 9.04 on: AMD Athlon64 X2 Dual Core Processor 5200+

View 11 Replies View Related

Software :: Get Mythtv To Find Channel 4 On Hauppauge 250 Pvr Card?

Nov 8, 2010

I have an old Fisher VHS player with the old 'antenna' connection [one wire] to the TV. It does still work. I connect this to an old Hauppauge 250 pvr card in a box running Ubuntu 10-10.

I want to be able to put old tapes on my disk drive.

Working mainly with MythTv, I can not get it to work. The hardware seems to be working as I have options for tuner1 and other inputs. As channel 4 is no longer 'broadcast' I can't scan for it even with the VCR running.

Would someone please hold my hand an provide the necessary steps to get MythTv working or an alternative.

I have read the five similar threads and numerous other google hits but can't find what I need. Part of my problem is I am also new to Ubuntu and jumping in an out of terminal sessions is no where near what I grew up with in Slackware.

View 2 Replies View Related

Fedora Hardware :: Make And Install The Driver For The Hauppauge 1600?

Jun 8, 2011

I am having an extremely hard time trying to make and install the driver for the Hauppauge 1600. I have Fedora 14-2.6.35.91 kernel. I am a newbie at this kind of installation. I would like to know is there a kernel that I can install that the tv tuner will work right out of the box. This is very frustrating. I try to install the CX18 driver, I receive an error message. I would really like this to work.

View 3 Replies View Related

Hardware :: Video Card Error Hauppauge WinTV-HVR 1850 Kernel 2.6.27-17-generic

Sep 4, 2010

I am trying to install a Hauppauge 1850 video card into Linux Home automation system (LinuxMCE) which is based on Ubuntu Intrepid (I can't upgrade the kernel since this is what the LinuxMCE distribution supports)I am feeding analog signal to the video card, either through a coax analog connection or an RCA analog connection. I cannot see any picture from the card (I verified that the video card is working properly under a Windows Vista OS)I am trying to use the video card using a lightweight application such as tvtime, xawtv. In all applications I am failing to see an image. (For example, tvtime shows the message "No inputs avialble Cannot open capture device /dev/video0". Right clicking on Input configuration / Change video source doesn't give any options)

View 9 Replies View Related

Ubuntu Multimedia :: Updating NVidia Driver Not Working, Tried Manual, Not Working?

Sep 18, 2010

I installed it on a Dell Inspiron 531 with the GeForce 6150SE nForce 430 built in video card. From the recommend driver list I installed �NVIDIA accelerated graphics driver (version current) [Recommended

Well, turns out it should not have been recommended. I had restarted and all I got was a low res ubuntu logo and a boot right into a full screen terminal. Tried startx and got a no screens found, I look online for about an hour last night and decided to just reinstall, which takes a couple hours when installing all the packages.

I have done more research today and found to install the latest linux x64 driver from nVidias website, which I did, but it does not run. I followed some more instructions and it said to do a �sudo chmod +x <file>� which I did, and it starts to open and I get �You appear to be running an X server; please exit X before installing.�

I�m starting to get a little frustrated here, guess I�m just used to a lot of the ease of windows and assumed that something like installing a graphics card driver would be easy.

View 3 Replies View Related

Ubuntu Multimedia :: .m4a Files Not Working In Banshee But Working In Rhythmbox

Apr 26, 2011

.m4a files not working in banshee but working in rhythmbox.

View 1 Replies View Related

Ubuntu Multimedia :: Multimedia Keys On Laptop Aren't Working?

Jan 28, 2010

I have a Dell 1525 and I just installed Ubuntu on it. The Multimedia keys (previous, stop, play/pause, next) and volume control keys (mute, increase, decrease) buttons aren't working at all. Is there anyway I can get them to work?

View 3 Replies View Related

Debian Multimedia :: XF86Audio Multimedia Keys Not Working In Squeeze

Jun 23, 2011

I finally installed Squeeze on my laptop and found out that the XF86Audio multimedia keys do not work.

When I press them, they're correctly identified by xev but they do not produce the desired effect (raise/lower/mute volume, play/pause/stop/prev/next song in media players like Sonata).

Funnily enough though, they do work in Audacious, which has its own plugin to manage XF86Audio media keys.

So it's like the action of pressing these keys is not intercepted by the system and no event is triggered.

I think this might be due to a missing package or configuration but I have no idea where to look...

View 1 Replies View Related

Ubuntu Multimedia :: DVD Not Working On 10.04

Jun 7, 2010

My fresh install of 10.04 on my newly built desktop won't play a DVD. Samsung 24X DVD Burner SH-S243N/BEBS
I am sure there is some little programplugin I need.

View 3 Replies View Related

Ubuntu Multimedia :: Can't Get Tv Out Working

Jul 5, 2010

I was replacing my media setup(10.04) with an upgrade and encountered the following problem: I can't get the tv out working. I tried both with the NVidia drivers and without a xorg.conf file (vesa, according to xorg.log) The motherboard is an Asus P4P800-VM (with integrated graphics), the GPU is an old NVidia GeForce 4 MX 440. I took the card from the old setup because of the tv-out, so I know the card itself is fine, using a crt monitor on the VGA port also works without problems. I noticed that the old setup also used the tv as its screen, for displaying the BIOS POST and bootscreen, while the new machine just stays blank(no signal). There is an option in the bios to set a tv as the primary boot screen, but to no effect. Using the xorg.conf generated by the myhtbuntu installer, the console (tty1-6) has this weird pink color, this does not occur when generating the config with the nvidia tools, or when completely deleting the xorg.conf file.

View 1 Replies View Related

Ubuntu Multimedia :: MIC Not Working?

Aug 8, 2010

I've had a major problem getting my mic to work with pulseaudio. After looking around for a while I see that I'm certainly not the only one.I have run a whole lot of suggested commands - copied all sorts of lines into /etc/modprobe.d/alsa-base.conf - upped all sorts of volume controls with alsamixer or pulseaudio - uninstalled and reinstalled - upgraded and..NOTHING WORKSI actually messed around with it so much that I had to reinstall Ubuntu again (10.04)I have been using linux on-and-off for a while but have never been the kind of person to remember all these long commands...so please consider me to be Newbie (as I feel like one at the moment)I'm sure if there's anyone out there able to help they'll need a bit of info about the machine.

This is after a fresh install - so please feel free to take anything step-by-step upgrades...commands...the lotLets start with:Packard Bell EasyNote V5 series (V5910)00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02)The sudo gedit /etc/modprobe.d/alsa-base.config - brings up

# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1

[code]....

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved