Ubuntu Multimedia :: MythTV And Hauppauge / HVR-1250 Not Working?
May 25, 2011
I've been doing alot of reading but i cant seem to get my HVR-1250 card working with mythTV, my system see's it but i cant get myth TV to recognize it? it doesnt come up in the "probed info" in the backend, do i have to just plug in the right info and not worry about that or what?
sudo lshw -C multimedia output:
Code:
*-multimedia
description: Multimedia video controller
product: Hauppauge Inc. HDPVR-1250 model 1196
vendor: Conexant Systems, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pciexpress pm vpd msi bus_master cap_list
configuration: driver=cx23885 latency=0
resources: irq:17 memory:fe800000-fe9fffff
ubuntu 10.04 32 bit
AMD Atholon dual core
View 4 Replies
ADVERTISEMENT
May 4, 2011
I've looked everywhere for this and I can't find an answer. I've got a hauppauge wintv-1250 card; ubuntu and mythtv recognize it OOTB. The dvb digital tuner portion of this card works great. I had quite a time figuring out how to set it up, but it all works pretty good now. nyway, the only problem is that I need to record 2 sources: 1 is RF, the other is from an analog cable box. So, I figured I should be able to record analog video from the s-video input. Is this possible with mythtv, and if so, how? I could watch it in windows with the software that came with the card, so I know it's possible, but I'd rather avoid windows if I can.
View 1 Replies
View Related
Dec 18, 2010
This is a writeup to help you enable your Hauppauge 1250 tv tuner card so you can use it with programs such as Mythtv. This will enable multiple cards. I am assuming your card isn't working "out of the box". You can check if it is recognized in the OS by following the instructions in "How to tell if the TV card is recognized" below.
In linux land, the 1250 is not just a 1250 but can be a variety of designations. I own older 1250's which are listed as 1270's. My newer cards are listed as 1255's. These cards usually don't work "out of the box" with linux. You have learn the ropes and enable them yourself. You have to have time on your hands and be a glutton for punishment when it comes to setting up linux but a stable, well running system is worth it. If you need everything done for you and want it "out of the box", you might as well ride back to Bill Gates' Boneless Chicken Ranch.
First off, here is an updated cardlist for the cx23885 driver that is used with the 1250 amongst other tuner cards:
[Code]...
View 9 Replies
View Related
Nov 8, 2010
I have an old Fisher VHS player with the old 'antenna' connection [one wire] to the TV. It does still work. I connect this to an old Hauppauge 250 pvr card in a box running Ubuntu 10-10.
I want to be able to put old tapes on my disk drive.
Working mainly with MythTv, I can not get it to work. The hardware seems to be working as I have options for tuner1 and other inputs. As channel 4 is no longer 'broadcast' I can't scan for it even with the VCR running.
Would someone please hold my hand an provide the necessary steps to get MythTv working or an alternative.
I have read the five similar threads and numerous other google hits but can't find what I need. Part of my problem is I am also new to Ubuntu and jumping in an out of terminal sessions is no where near what I grew up with in Slackware.
View 2 Replies
View Related
Oct 24, 2010
I tried mythtv and I can't seem to figure it out. The only guides I can seem to find are for 6.06.
View 1 Replies
View Related
Jan 29, 2010
I'm trying to get a Compro T100 tuner working with MythTv, but it shows up as a T750
>lspci gives:
Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1)
Subsystem: Compro Technology, Inc. Device [185b:c900]
[code]....
View 2 Replies
View Related
Oct 9, 2010
I am really confused/frustrated/exhausted, now. I bought a HVR-1250 for a PVR and music/media HTPC that I just built, and installed Mythtv last night. The backend continues to report it as "failed to open" in the capture card section. Having read through all of the recent information I could find (mostly forums), I've tried card=3, 7, 12, 18, 19, 20, and 21 options in the new cx23885.conf file, and the card's still not recognized in Mythtv. dmesg shows me the same info from most recent screen captures (other forums, too), and lspci still reports it as a 1250 rev. 04. (Before I made the new conf file, the card was listed with device code 0070:2259.
I'm new to all things linux, and I have no idea where else to look, or what else to do. I'd prefer to not use Win Media Player, as I've heard it has more playback issues (skips, jerks, etc.) with recorded high-def OTA programs. If I'm wrong, I have no problem with switching OSes, as I just want to be able to record high-def TV and watch it when the baby is asleep. Is there something I'm forgetting, or am I just screwed, for some reason I don't understand?
View 1 Replies
View Related
Nov 5, 2010
I picked up a Hauppauge WinTV HVR-1800 PCIe TV tuner a few days ago. Digital TV worked fine right out of the box (after setting up the firmware), but I have not been able to get analog video to work at all.If I run mplayer, xawtv or tvtime using /dev/video1 (yes, that is the correct devnode, video0 is a different card in my rig), So, has anyone RECENTLY gotten analog capture working on this card?
View 5 Replies
View Related
Aug 7, 2011
I am having problems with Natty AMD64 (Ubuntu 11.04) and LIRC/IR-Keytables.
I have a Hauppauge WinTV card (Bt87 (TV card and IR receiver/transmitter) that worked (for the first time) automatically with 10.10 and LIRC. I recently moved over to 11.04, copied my LIRC config files over (hardware.conf, lircd.conf, lircmd.conf, etc), and received the error couldn't find any node at /sys/class/rc/rc*
The modules I had previously been successful with were: lirc_dev & lirc_i2c, as is apropriate for my speific card.
I then learned that Natty incorporated a lot of RC elements in to the kernel, and tried following:[url]
Which suggested removing lirc. At this point, ir-keytable also gives the same error about no node at /sys/class/rc/rc*
I think that I am having a problem with the correct driver being loaded for my card. When I look at a dmesg, the relevant section is: (note: I'm not sure if this dmesg was from before or after I uninstalled LIRC and just tried keytables)
Code:
The 3rd last line makes it seem that the IR capabilities have been recognized further confusing me as to why no /sys/class/rc/rc* has been registered. I've attached an unedited copy of my proc/bus/pci/devices, and below is my lsmod.
Code:
View 1 Replies
View Related
Apr 28, 2010
I'm just not getting anywhere here after 12 - 15 hours of googling last 3 days.I'm linked out, and linked back, almost into a do-loop, just like a boomerang, and still no vids...
View 2 Replies
View Related
Apr 27, 2010
I've followed instructions here upto the point for the Startup Script for Analog Tuner the script provided does not run (v4l2-ctl seems to be depriciated?) In any case the scan for digital channels is not finding anything, I wasn't able to scan for analog channels. When I do something like cat dev/video0 | mplayer All I see is static. I've followed the instructions and I didn't get any obvious error messages. I'm completely lost. I know the tuner works, I've tested in in Windows 7. I've tried connecting the coaxial cable directly to the tuner's TV outlet, to the ATSC outlet, I've tried connecting the set-top box out coax to the TV, and ATSC outlets to no avail.
View 1 Replies
View Related
Jun 15, 2010
what can I use to watch TV? Obviously in Windows I used Windows Media Center. What can I use while in linux? I want to run Ubuntu, not Mythbuntu.
View 1 Replies
View Related
May 5, 2010
I've got a strange problem with my Hauppauge card; I've just undertaken a clean install of Mythbuntu 10.04, and the built in Hauppauge remote for my Nova S2 HD card is intercepting remote signals from the number and direction keys and sending them as keypresses to the terminal - even when lirc isn't running.I didn't have this issue under 9.04 - but it seems that whatever is intercepting the IR signal is preventing LIRC from getting a look-in as it makes no difference whether lirc is running or not.I found this thread: URL... but the link to the explanation is dead and my attempts to blacklist lirc_i2c and gpio_keys have made no difference.
View 4 Replies
View Related
Jun 27, 2010
I bought this tv card because it was listed as working 'out-of-the-box'. Well, it didn't for me. I've googled and forummed for 3 days, tried all the fixes and nothing works.
View 1 Replies
View Related
Mar 7, 2011
I recently upgraded my old Hauppauge TV Card (BT878) with a HVR-1300. Whilst the older card worked OK, I am struggling to get the new card to work, despite it seemingly having installed OK in YaST.
View 2 Replies
View Related
Nov 4, 2010
I've been trying to get my Hauppauge USB Live 2 video grabber to work under Ubuntu 10.04. I have installed the drivers, and using TVTime I get a perfect picture - but no sound, and also I can't record with it. I have found a guide on how to get it with sound using MythTV, but it seems I fail at setting it up. It tells me it couldn't find the backend server, but it's running in my terminal.
View 1 Replies
View Related
Sep 3, 2011
I have a physical storage problem and want to put my VHS tapes onto disk. I have an unused Hauppauge WinTV-PVR350 which I understand should do the job but can I do it using Linux? I seek some pointers on what program to use, how to do it and tag the resulting files and help installing my Hauppauge card and any driver if required. I have openSUSE 11.4 (64bit) installed using KDE desktop.
View 7 Replies
View Related
Mar 18, 2010
OS of this system: Ubuntu 9.10 Server
Okay so i have a Hauppage card, not sure exactly which one, under lspci it is:
Quote:
02:01.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
02:01.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
lsmod lists:
Quote:
tvaudio 25884 0
snd_intel8x0 30168 0
tda7432 5016 0
snd_ac97_codec 101216 1 snd_intel8x0
code...
How do I go about getting this working? --I'm trying to make sure the card works before I mess with myth-setup anymore.
Note: in MythTV I don't get the "Scan Channels" option, so I'm not sure what to do there.Note: Cable source is my college campus cable.
View 14 Replies
View Related
Feb 11, 2011
After overcomming a lot of difficulties, my MythTV (Via Epia 10000EG with Hauppauge PVR 500 card) worked with Mythbuntu 9.04. Last year it crashed and I had no time to spare to rebuild it.
Last couple of weeks I had more time and downloaded and tried to install Mythbuntu 10.10. Everything seems to be installed ok, but I get no picture in MythTV when I select "Watch TV" and no picture when I try to record something. When watching TV, the message "Please wait" appears for appr. 5 secs and then the system returns to the menu.
I installed Mythbuntu 10.10 and am using the provided IVTV drivers.
Dmesg and lspci give no errors, every seems to be in order, IVTV drivers are loaded, initialized and errorfree. Cat /dev/video0 gives me static in MPLAYER. The MythTV backendlog doesn't even give a message, the frontend log just says there is no picture...
There seems to be an error between the back and frontend. I checked the settings in capturecards, TV sources, channel edits, etc,etc, but I can't find it.
View 7 Replies
View Related
Jan 1, 2010
I'm running ubuntu 9.10 wit mythtv. My dvb card is a haupauge pvr 1250. When I run the backend, this is the output.
Code:
alex@mythtv-center:~$ sudo killall mythbackend
[sudo] password for alex:
alex@mythtv-center:~$ mythbackend
2010-01-01 16:16:39.329 mythbackend version: branches/release-0-22-fixes [22594] www.mythtv.org
2010-01-01 16:16:39.329 Using runtime prefix = /usr
code....
View 5 Replies
View Related
Jan 9, 2010
I've been at this for the last hour. I just put a Hauppage WinTV-TVR-1800 into my machine, rebooted and installed MythTV. I set up the card, the video source and the input as well as configured a few random channels. I click WATCH TV in the menu, it goes to a screen saying, "Please Wait....", then it brings me back to the menu. There's no error, is there some sort of log file.
Here it is run in the terminal:
Code:
deemar@Chugger:~$ mythfrontend
2010-01-09 20:03:05.636 mythfrontend version: branches/release-0-22-fixes [22594] www.mythtv.org
2010-01-09 20:03:05.663 AudioPulseUtil: Suspend Success
2010-01-09 20:03:05.665 Using runtime prefix = /usr
2010-01-09 20:03:05.665 Using configuration directory = /home/deemar/.mythtv
2010-01-09 20:03:06.445 Empty LocalHostName.
[Code]...
View 9 Replies
View Related
Jan 22, 2010
MB: Gigabyte 790XTA-UD4 boards, with internal sound
4Gig Mem, Phenom II CPU, 1 TB HD
HD in: 2 pc5500 TV cards
HD Out: GeForce GT240 out,
I'm getting very frustrated, having dropped a substantial (for me) amount of money trying to get a DVR setup, and Myth TV has punished me every step of the way.At this point, the extreme frustration is that sound *was* working earlier - not going to the TV via HDMI (Which seems like it should be easy but I've yet to get it to work) but I had speakers working - right up to the instant I installed restricted extra's to run mp3's - the instant I got totem to play sound, I completely lost all sound from myth TV, even playing back digital files it has recorded have no sound now.
alsamixer seems to have been used numerous times to fix these issues, but doesn't actually show as a valid package when I check the repository - I installed the gnome version instead, but nothing I do there seems to have any effect.I'm not entirely sure if I need/should be using the patch from the pc5500 cards into the sound card line in - as near as I can tell, that's only for analog signals, and it *was* running happily without it.
As mentioned - sound is fine from everything else, but even playing a recorded file I have no sound playback (Note: I had not recorded anything I can verify *had* sound before). I've gone through various guides, and I got nuthin'. All the actual cards and hardware have every appearance of working.
View 6 Replies
View Related
May 8, 2010
Are there any viable alternatives to mythtv? I find the setup to be very cumbersome and the keyboard interface is a poor second to Windows Media Player for a basic PVR system on a desktop computer.
Mythtv seems an overkill for what I require, just to simply watch TV using my DVB-T input and record shows when I'm away from home.
View 3 Replies
View Related
May 30, 2010
MythTV Records fine but will not play the recorded shows and I can not watch or open the TV. Running Ubuntu 10.04 LTS lucid Runing a pcHDTV HD-5500 Video card Using on Board Video from an Asus M3A78-EM with onboard ATI Radeoon 3200
dmesg | grep DVB
[ 14.461244] cx88[0]/2: cx2388x based DVB/ATSC card
[ 14.771709] DVB: registering new adapter (cx88[0])
[ 14.771711] DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend). My symptoms are as follows: I can do a manual scan
[Code]...
View 6 Replies
View Related
Jun 19, 2010
I am trying to get mythtv to work with my tv card. I am using ubuntu 10.04 and I have installed mythtv but it isn't picking up my tv tuner card. I have a Hauppauge wintv hvr 1250. I am wondering what I need to do to get it to work?
View 1 Replies
View Related
Aug 3, 2010
I was configuring mythtv and when I was in the video settings I set it up to use OpenGL. Now I can no longer see video and I can't get back to the settings screen to disable OpenGL. Is there a config file that I can edit to disable OpenGL or someway to revert everything back to default. I tried completely removing the frontend and reinstalling it but that didn't do anything.
View 2 Replies
View Related
Oct 13, 2010
that said on to my problem. I have a Hauppauge hvr 950-q that I had been using with 10.04(64-bit) since it came out with no issues at all(non that i could not fix anyways) had mythtv set up using mythubuntu and all was great. I upgraded to 10.10(64-bit) last night and cannot get sound to work during live tv. If i watch an old recording the sound works. Sound also works everywhere else on my system. Before the upgrade the audio setting in the backend configuration of the tv card was set to /dev/dsp2 this no longer works. if i put it at that(i have to enter it manually) then i have no sound and if i try to change Channel the tv feed crashes.
I have tried /dev/dsp2,1 i even tried /dev/snd/contolC1 wich i got from browsing around in /dev and found this to point to my 950-q all with same results.If i use alsa:default as the audio device in the backend i still get no sound but i am at least able to change channel.everything works in TVTime.i am simply at a loss. My next step was going to be a clean install of 10.10 but i thought i would check here before taking such a drastic step.
View 9 Replies
View Related
Jan 23, 2011
I installed mythtv and found channels using mythtv-setup. When i click Watch TV from the myth tv main menu i get a screen that says Please wait... and then it takes me back to the main menu...My tuner is Winfast PVR tv 2000xp Is there any way to get it to work?
View 4 Replies
View Related
Jun 29, 2011
I am trying to watch tv on my monitor with mythtv. I had my card configured correctly. The first half of the Hauppauge 1600 is for analog tuning, so I have to select ivtv from the dropdown menu. I am receiving an error message stating that it cannot be opened. An hour ago It was fine. When It was working fine and everything was normal, I still could not receive any video on the tv. in mythtv. I receive a red screen. The coax cable is running from the wall into the card. I do not want to run it through my cable box for it seems difficult to configure a remote. I went to schedule direct and downloaded the correct guide for my region(which is the US). What could be the problem? I have searched forums and articles. I really want to use mythtv and cease using Windows Media Center. Does analog tv work in Mythtv. I am using the 0.24 version. My operating system is windows xp and I do not have a graphics card setup for tv-out yet.
View 3 Replies
View Related
Sep 1, 2011
What's the accepted method for converting Mythtv's nuv files to avi files now?
I ask this because nuvexport seems to be unsupported these days. The last released version removed support for using transcode to convert the files. This leaves only mencoder and ffmpeg, and these have the following problems:
1) mencoder is much, much too slow. It takes about five times as long to convert a file as transcode ever did.
2) Ubuntu's ffmpeg is crippled, and doesn't work. I realise that there are instructions for installing a version of ffmpeg that works, but as this does not provide any method for creating Debian packages of it, I do not wish to pollute my filesystem with a mish-mash of manually installed software.
Is there any way to convert nuv files with transcode?
View 5 Replies
View Related
