I'm just not getting anywhere here after 12 - 15 hours of googling last 3 days.I'm linked out, and linked back, almost into a do-loop, just like a boomerang, and still no vids...
View 2 RepliesWhat is the best analogue capture program please to capture Austar.
View 1 Replies View RelatedI tried mythtv and I can't seem to figure it out. The only guides I can seem to find are for 6.06.
View 1 Replies View RelatedI've followed instructions here upto the point for the Startup Script for Analog Tuner the script provided does not run (v4l2-ctl seems to be depriciated?) In any case the scan for digital channels is not finding anything, I wasn't able to scan for analog channels. When I do something like cat dev/video0 | mplayer All I see is static. I've followed the instructions and I didn't get any obvious error messages. I'm completely lost. I know the tuner works, I've tested in in Windows 7. I've tried connecting the coaxial cable directly to the tuner's TV outlet, to the ATSC outlet, I've tried connecting the set-top box out coax to the TV, and ATSC outlets to no avail.
View 1 Replies View Relatedwhat can I use to watch TV? Obviously in Windows I used Windows Media Center. What can I use while in linux? I want to run Ubuntu, not Mythbuntu.
View 1 Replies View RelatedI've got a strange problem with my Hauppauge card; I've just undertaken a clean install of Mythbuntu 10.04, and the built in Hauppauge remote for my Nova S2 HD card is intercepting remote signals from the number and direction keys and sending them as keypresses to the terminal - even when lirc isn't running.I didn't have this issue under 9.04 - but it seems that whatever is intercepting the IR signal is preventing LIRC from getting a look-in as it makes no difference whether lirc is running or not.I found this thread: URL... but the link to the explanation is dead and my attempts to blacklist lirc_i2c and gpio_keys have made no difference.
View 4 Replies View RelatedI bought this tv card because it was listed as working 'out-of-the-box'. Well, it didn't for me. I've googled and forummed for 3 days, tried all the fixes and nothing works.
View 1 Replies View RelatedThis is a writeup to help you enable your Hauppauge 1250 tv tuner card so you can use it with programs such as Mythtv. This will enable multiple cards. I am assuming your card isn't working "out of the box". You can check if it is recognized in the OS by following the instructions in "How to tell if the TV card is recognized" below.
In linux land, the 1250 is not just a 1250 but can be a variety of designations. I own older 1250's which are listed as 1270's. My newer cards are listed as 1255's. These cards usually don't work "out of the box" with linux. You have learn the ropes and enable them yourself. You have to have time on your hands and be a glutton for punishment when it comes to setting up linux but a stable, well running system is worth it. If you need everything done for you and want it "out of the box", you might as well ride back to Bill Gates' Boneless Chicken Ranch.
First off, here is an updated cardlist for the cx23885 driver that is used with the 1250 amongst other tuner cards:
[Code]...
I've looked everywhere for this and I can't find an answer. I've got a hauppauge wintv-1250 card; ubuntu and mythtv recognize it OOTB. The dvb digital tuner portion of this card works great. I had quite a time figuring out how to set it up, but it all works pretty good now. nyway, the only problem is that I need to record 2 sources: 1 is RF, the other is from an analog cable box. So, I figured I should be able to record analog video from the s-video input. Is this possible with mythtv, and if so, how? I could watch it in windows with the software that came with the card, so I know it's possible, but I'd rather avoid windows if I can.
View 1 Replies View RelatedI've been doing alot of reading but i cant seem to get my HVR-1250 card working with mythTV, my system see's it but i cant get myth TV to recognize it? it doesnt come up in the "probed info" in the backend, do i have to just plug in the right info and not worry about that or what?
sudo lshw -C multimedia output:
Code:
*-multimedia
description: Multimedia video controller
product: Hauppauge Inc. HDPVR-1250 model 1196
vendor: Conexant Systems, Inc.
physical id: 0
bus info: pci@0000:02:00.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pciexpress pm vpd msi bus_master cap_list
configuration: driver=cx23885 latency=0
resources: irq:17 memory:fe800000-fe9fffff
ubuntu 10.04 32 bit
AMD Atholon dual core
I recently upgraded my old Hauppauge TV Card (BT878) with a HVR-1300. Whilst the older card worked OK, I am struggling to get the new card to work, despite it seemingly having installed OK in YaST.
View 2 Replies View RelatedI've been trying to get my Hauppauge USB Live 2 video grabber to work under Ubuntu 10.04. I have installed the drivers, and using TVTime I get a perfect picture - but no sound, and also I can't record with it. I have found a guide on how to get it with sound using MythTV, but it seems I fail at setting it up. It tells me it couldn't find the backend server, but it's running in my terminal.
View 1 Replies View RelatedI have a physical storage problem and want to put my VHS tapes onto disk. I have an unused Hauppauge WinTV-PVR350 which I understand should do the job but can I do it using Linux? I seek some pointers on what program to use, how to do it and tag the resulting files and help installing my Hauppauge card and any driver if required. I have openSUSE 11.4 (64bit) installed using KDE desktop.
View 7 Replies View RelatedI need to use Skype to contact my kids in South Africa. I live in the UK. This is very important for me. Surely there must be a fix by now on 64bit 10.04 to use mic capture or a workaround.
View 7 Replies View RelatedI have created several DVDs from my camcorder (sony handycam DCR-HC21 NTSC); however, the recordings are too long. I would like to capture smaller segments of these and load them online to share with family and friends.I would like to know what is the most recommended software for this task. I am running Ubuntu 9.10.I would have done this by using a firewire cable directly attached from the camcorder to my laptop, but my laptop has only USB ports. So I ended up creating DVDs using an stand alone Video Recordable DVD Drive.
View 1 Replies View RelatedI've no idea what the heck is going on with my TV capture card, i went to the other posts about my Hauppauge Inc. HDPVR-1250 model 1196 but it all didn't work i have the ubuntu-restricted extras installed but mythtv is not picking up the card. i'm running ubuntu karmic.
View 9 Replies View RelatedHow do I capture video from my JVC GR-DF470 MiniDV camera into 10.04 Lucid.PiViTi looks good for an editing app, and I've installed OpenShot as well, but neither have a way of capturing the video from a camera. I used Kino previously in 8.04 Hardy, but it was buggy at best in 9.10 Karmic; I've just installed it in 10.04, but capture keeps stopping after 2 or 3 seconds. I also tried kdenlive, but the audio capture has a lot of 'noise' that is louder than the voices on the tape, and once it finishes capturing video, it doesn't display a 'Save' dialogue as it is supposed to - so that wasn't very successful either.So what can I use to capture video from a MiniDV Camera via Firewire.
View 9 Replies View RelatedI want to capture the video from my sat box using an extra laptop I have and then distribute a live feed on my network so that I can watch tv on my laptop around the house. I want to use an old Dell X300 with a broken screen. It's not too powerful with a 1.2GHz Pentium M and 640MB ram. I was thinking of throwing Zubuntu or something lighter weight on it. I'll use a usb capture card that will support S-video. I am sure there are plenty of those that will be compatible with Linux. What I need to know is what capture software should I use?
Is there any capture software that will transmit over a network as a live feed? Is my laptop even powerful enough to do what I'm asking? This thing had no problem playing back 480p but capturing, encoding, and distributing over a network is another story. Are there any usb capture cards that use hardware encoding? Would installing a lighter weight distro be necessary in order to gt laptop performance boost it needs to handle what I want to do? And what of software to receive the stream? VLC should have no trouble connecting to the stream right? How about SMPlayer?
I have a Ubuntu Server 10.04 box, which i have a Microsoft LifeCame VX-500 webcam connected via USB.
i think Ubuntu has detected my webcam
Code:
kimse@ajax:/dev$ sudo lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 045e:074a Microsoft Corp.
[Code]....
I am trying to configure my Kubuntu desktop since some time to have Mumble working perfectly... It was running in the past, i re-installed some days ago and now i have a huge problem. Basically, capturing the microphone works and it's sent to Mumble, however everybody also hears my desktop sound. I tried adjusting channels in KMix with no luck. Also i don't understand why the capture channels are enabled and must stay at minimum volume...
View 2 Replies View Relatedthere doesnt seem to be a software in linux that allows that and the mim dv doesnt get recognized at all.
View 2 Replies View RelatedI am working in a script I have, to capture video with sound from my capture board, wich is a clone of the pico2000. This script was working in Ubuntu 9.10 untill I reformated my machine and instaled the Ubuntu 10.10, 64 bits. The machine is an AMD Athlon II, 2.6GHz with 3 GBytes of Ram. The former script was:
Code:
#!/bin/bash
clear
SERVICE="mencoder"
MOVIE=$(date +"%H%M")
[Code].....
I recently converted an amd 64 bit WINdows machine to Lucid 64 bit. Everything has gone well. I had numerous issues with Pulseaudio that I removed it. Sound with Alsa has been great, including system theme sounds. I can record via a mike as well. What I cannot do is to capture sounds coming through the sound card. When I record I am getting empty files. The mixer indicates that there are two capture devices. Here is some data on my audio card.
**** List of PLAYBACK Hardware Devices ****
card 0: SB [HDA ATI SB], device 0: ALC888 Analog
[ALC888 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: SB [HDA ATI SB], device 1: ALC888 Digital
[ALC888 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI
HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
I'm trying to capture my desktop sound (Video too, but that part's working) but nothing I try works. I've tried various programmes, none of them work. I tried various things I read on different websites, and nothing worked. I noticed /dev/dsp was missing, and put it back by a guide, but that made no difference and disappeared again now I rebooted anyway
View 5 Replies View RelatedI have been trying to put together a mythbox for myself. I installed Ubuntu 10.10 and the newest version of the Mythbox backend. My capture card that I am having issues with is a Hauppauge Wintv-HVR-1850 card, I followed the instructions on installation from linuxtv.org and did not get any errors. I tried to set up Mythtv and it didn't get a signal and couldn't find any channels. I would like to know if my card is even working so I tried using xawtv but still could not get a signal from my card.
how I can verify that my card is installed correctly?
This is on Karmic Koala 9.10. The video displays fine via guvcview using a Logitech webcam. The trouble is the capturing of the video. With .AVI, I've tried different video formats (MPEG-4, flash, etc.) and none of them will play. The generated .avi file seems to grow with data, but the result is just unplayable -- it just hangs, thinking it's playing. Is there a troubleshooting page or something to figure out what the problem I'm having with guvcviewer is?
View 1 Replies View RelatedI'm using natty. is there any way to get a Pinnacle DVC 101 to capture video from composite source on Ubuntu Natty? it seems that when new releases break functionality they often are never fixed.
I'm also unaware of a simple GUI application to use in order to capture the video. It would need start and stop features.
As a TOTAL noob to Linux setting up my ATI All-In-Wonder 2006 AGP card with GATOS to allow me to transfer old video tapes to my computer (for further editing to DVD). I have Ubuntu 9.10 loaded and the relevant link for the GATOS stuff is:[URL]..
View 2 Replies View RelatedI have been trying to get tvtime or any tv package to work with my Pinnacle PCTV HD usb but I have not had success. I have correctly installed every driver imaginable. So, here is what it what it comes down to: When I open tvtime it says "cannot open capture device /dev/video0" and the screen is blue. But my usb PCTV HD stick is NOT /dev/video0 so the question is how can I get tvtime to look for the usb tv tuner rather than video0?
View 9 Replies View RelatedI want to record some streaming internet radio talk shows and music performances on NPR, and I'm wondering what my options are in Ubuntu. I'm looking for something that can output high quality lossless files in several formats, hopefully including mp3 and ogg.
View 6 Replies View Related