I have spent some time in photoshop. And I remember a useful feature in it, where Photoshop can tell you info about the image, by pressing on the properties or something. Photoshop can say what the picture was taken with (mobile / camera) and what date.
I run Ubuntu now is there anyone who knows a program which can do the same for Ubuntu? I can't find anything in GIMP
Running Ubuntu 10.10 along side Windows7 on a 64-bit HP Pavilion dv7 Laptop. Everything works in Windows. Everything works in Ubuntu, except for 2 things.1) I can live with not being able to enable/disable wifi.) I cannot read photos from an SD card plugged into the laptops SD card reader. When I open the SD card in Ubuntu, I can see the file name, but the thumbnails show messed up pictures. Usually, the bottom half of the photo is solid green, and there are usually lines running through the photo, or it is divided into quadrants with one quadrant being ok, but the rest having the green and/or lines.I assume the driver for the card reader is not correct. Card reader works fine in Windows. So I have to reboot into windows, copy pictures from reader to a folder, then reboot into Ubuntu and I can see and open the photos just fine. Just cannot read and copy them from the card while in Ubuntu.
View 8 Replies View RelatedWhen I update my system by KpackageKit I have the ability to read what was fixed by that package update by clicking on package's name. How to read this info in command line by yum?
View 4 Replies View RelatedI am trying to find a linux cmd line utility that will read info from an iso file. The problem I have is that the file is always corrupt so I cannot mount it because I only have around 100k of it but all I need is to extract the headers of what the iso contains. how I can achieve this I have searched the internet with no look at all.
View 1 Replies View RelatedI downloaded Adobe Air, both the rpm and the .bin versions. First I tried the rpm, it went through the motions of installing but just disappeared. then I tied the .bin, got tot the installer, accepted the license, entered my root password, but it stopped installing with "an error occurred. Adobe AIR could not be installed. Install either Gnome Keyring or KDE KWallet before installing Adobe AIR". I opened Kwallet and tried again, but to no avail. I am running OS11.4 64 bit. What can I do to get this thing working?
View 6 Replies View RelatedAlways when i attempt to download any software, an error message opens stating that adobe 8 cannot read it. when saved in downloads clicking open does not function and i cant find an uninstall for the adobe reader 8. I cannot get any anit-virus protection, problem compounded by having no cd input.
View 3 Replies View Relatedi decided to go ubuntu all the way in my laptop... it's already a week and freaking happy, however i'm new in linux so i wonder if someone can tell me how to add pictures to my iphone.
View 1 Replies View Relatedi am looking for an application to put my pictures to a dvd so i can watch on t.v. as a slideshow?
View 1 Replies View RelatedI plugged in my USb drive into my computer yesterday and tried to delete a folder. I was unable to do so and got the following message
Cannot move file to trash, do you want to delete immediately? The file "my file" cannot be moved to the trash. Show Details Unable to create trashing info file: Read-only file system
So when I click on delete I get another error message:
Error while deleting.
There was an error deleting Case Study Database. Show Details Error removing file: Read-only file system
At this point I can only click on Skip, Skip All, or Cancel.
I have not changed anything on the stick recently so I dont know what is causing the problem.
I know that it's possible to create panoramic photos very easily with hugin. But I would like to create a script for nautilus where I select my picture and then create a panoramic without any questions.I guess it's possible but I can't find on google, each time I find something about hugin.Is it possible to call from the command line and hide the interface during the process ?
View 3 Replies View RelatedI cant get my iphone to work with Ubuntu beyond transferring pictures. I have tried ifuse, isky, gtkpod etc. nothing seems to work, and many of the times I run into errors messages when following the tutorials. Ubuntu 64 bit 9.04 acer aspire 8730
View 2 Replies View RelatedUbuntu 10.10. All things have been working well and as expected until tonight. I was updating some flac files using easyTAG (AAC), adding pictures and changing things a little, then dropping them into a Sansa Fuze+. All things I've done with this setup before and with no problems. I close easyTAG and try to open: Places/ Pictures. Instead of the normal brouser up pops easytag at the pictures directory.
I test all other Places. For each Place selected easyTAG opens instead of the usual brouser. I go to synaptic and remove easyTAG and then restart the system. All is now normal again (except that easyTAG is missing). I reload easyTAG and once again it has put itself as the preferred tool to view directories. How do I restore things to normal and what have I done?
When I go in a file with pictures and right click on it I tell it to arrange pictures by modification date but when I start viewing the pictures and click on next then it shows them to me in Alphabetical order.I am using Eye of GNOME 2.32.0 to view picturesHow do I get this application to show me the pictures by modification date
View 4 Replies View RelatedI down loaded Debian 5.0.4 and burned it to CD (several times I might add till it was right) and now the computer I'm putting it on wont acknowledge it as a boot disk and load. It does not have a problem with my windows cd, which has a crack and the start of all my problems, But not the Debian CD-1 disk. what now? The computer is an IBM thinkpad a22p. Everything works as far as I can tell. But I was going to reinstall Windows and failed in that because of a small crack on the edge of the disk that stopped the install and any hope of accessing the file on the laptop. Microsoft does not support windows xp any longer, you must buy windows 7, but the ibm will not run it due to processor speed and ram limitations. But it will run linux and I'm willing to try it just to get out of microsoft control.
Idon't know what else to do. This is the link to where I downloaded the software ( [URL] ). The others five that i downloaded were on the same page that I got this one. Are there bad files here? Is there a missing file in the disc?
I have done this in the past with little effort using a easy to use GUI picture editor. Now I can seem to find the function in any program I have installed. I have digikam, fspot and gthumb image viewer. I am now not sure if I lost the program that I had been using in an update or if I am just looking in the wrong place.
In short, can someone suggest a simple way to group together jeps as a video with audio in the background. I want to be able to upload these to ......
I am just asking because i want to be sure, that sensitive data can not be extracted from my computer unencrypted, using cached files. For instance i would not want my girlfriend's picture to be uploaded to some random site, whereas it normally stays on an AES encrypted volume, but i viewed it once, so it was available in some cache folder, unencrypted - yea, sadly, it happened in windows -.
View 3 Replies View RelatedI use an android app (Exif4film) for recording EXIF data (only aperture, shutter speed) when shooting an old analog full-manual film camera.
Everytime i take a shot, i dial in the app the shutter speed and aperture settings. Later i want to see if my settings were right.
The app exports an xml file. What software should i use to extract the exposure settings and to put them on the corresponding picture?
I'm trying to prompt the user to enter Y or N in the middle of a while loop, but the read command is simply drawing in the next value.I'm reading from a simple file full of words (one per line)
Code:
while read line
do
[code]....
I have this problem, however the solution given there is outdated- There is no such menu entry (I tried to see if it was disabled, but it wasn't in the menu editor either).
So how would I do this in Karmic?
Edit: I found it. As a reference: Open Nautilus, go to Edit-> Preferences -> "Media" tab -> Photos -> Your choice.
I have a vx-6000 and the video and pictures actually works good but there is no sound can you get sound to work and how?
View 2 Replies View RelatedI want to read the hardware info from my cd-rom drive. It's actually a hd-dvd drive, but has no stickers or anything on it. I want to read its flash from the command line. I don't know if the "flash" is exactly what I want to read, but whatever displays its info.. model, serial, that stuff. (final goal being - I want to see if I can flash it to read blu-ray, but I need to figure out what drive it is first!)
View 2 Replies View RelatedI want a program similar to Windows Movie Maker that can record audio and import pictures that I made with GIMP and put them on a timeline so that I can make an animation.
View 5 Replies View Relatedso i cannot install anything because update-info-dir file is missing from /var/lib/dpkg/info/ .. I've searched for the last day and a half for a way to fix this, but nothing. can't even update dpkg because of this. so how do I bypass or fix this so I can install stuff (this is a fresh install of ubuntu 10.04 lts Lucid Lynx).
View 9 Replies View Relatedwhat do i need to write to get the mediafile info from mplayer?
View 6 Replies View RelatedI am using Rythmbox for Ubuntu 9.10. I want to alter the tag info for certain songs because it is incorrect. but when I open the properties window to do so, it won't let me type in the field......I can highlight the text, but not change it
View 2 Replies View RelatedIf I insert music CDs into my disc drive, Banshee can't fetch the track information and just displays everything as Track 1, Track 2,etc...
View 5 Replies View RelatedI am trying to get a listing of video information using ffmpeg or mplayer. I have found a way BUT it is only returning 1 piece of info..
Here is what I'm doing in PHP:
print exec("/usr/local/bin/mplayer -identify file.flv -ao null -vo null -frames 0 2>/dev/null | grep ^ID_");
But this will not provide an entire listing, it will only print out 1 thing such as:
ID_AUDIO_CODEC=mp3
I can specify what exactly I want to know something like:
print exec("/usr/local/bin/mplayer -identify file.flv -ao null -vo null -frames 0 2>/dev/null | grep ^ID_VIDEO_WIDTH");
but I want to just have all the info available at once instead of having to loop through like 20 times..
I have searched the web and these forums and have come up empty-handed. There must be a way... even and easy way... to submit or edit freedb information for a CD. Grip supposedly had the ability but 1) it seems to be no longer maintained and 2) it seems it requires sendmail to be installed. I've read that submissions can be made by email, but 1) I've found no information on how to do this (ie structure and content of email) and 2) that's a lame way to have to do this.
This shouldn't be difficult (much less impossible). What am I missing?
All cd's I try to load give me unknown audio. This is occurring on three different boxes running Natty. Was working fine.
View 3 Replies View RelatedI'm running 64-bit Natty Narwahl, and I'm trying to figure out how to get Pandora on Adobe Air. After enough searching I got Adobe Air to install, but I can't get it to install Pandora. It keeps telling me to try again or, if it keeps happening, contact the publisher. Also, I can't seem to understand if this is just Pandora One subscription that I can do this with, or if I can just use the non-subscription service with it.
View 2 Replies View Related