Ubuntu Multimedia :: [ERROR]: No Devices Found For Driver "OSS"
Sep 28, 2010
I followed this tutorial: [URL]... I followed it on my ubuntu system to get my 2 x M-AUDIO Delta 1010s working. My deltas are now detected. And apparently it's all ok. However when I try and open Ardour (which I installed from the repos), I get: Quote: [ERROR]: No devices found for driver "OSS". My graphics cards aren't attached to their break out boxes. Could this be why? For that same reason, I can't test to see if the audio is coming out. All I know is that Ardour can't find a device.
I have been trying to get this web cam working for a long time. lsusb:
Code: Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc. dmesg
Code: [ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice Kernel patch: [URL] Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
Up until about a week ago using Kubuntu 9.10, the sound on this computer was fine, but now every day when I turn the computer on I have no sound and I get a notification from Phonon saying: The audio playback device NVidia (ALC883) does not work. Falling back to.
If I turn the computer off and then back on, sound is working again. code...
Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
I tried to install the latest RealTek driver for Linux and it has wiped all my devices. I've tried reinstalling the alsa-base packages but it hasn't worked
Adding a kernel parameter to GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nodmraid" (not 100% it should go there grub2 is new to me, but that is another story) I noticed the following error when running update-grub.
ERROR: ddf1: wrong # of devices in RAID set "ddf1_Series1" [1/2] on /dev/sdb No volume groups found
Now I have not a clue where it is getting ddf1_Series1 from.sdf1 is part of a RAID1 group that has mdadm RAID1 > luks > LVM
Errors bug me.. as I am new to grub2 was wondering if anyone has an insight into the error / where to investigate Still reading the grub2 / grub manuals.
I have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
I am trying to install NIC driver, at last when I am using command make the following output is coming. How to come out from this error: Makefile:65 *** Linux source not found. Stop.
After following instructions to install software to play encrypted DVDs and after rebooting, I tried to play a DVD in Totem. A driver was searched for by Totem; not found; DVD not played.
Laptop is Dell Latitude C600/C500 with Pentium III 850Mhz, 256Kb L2 Cache, 256MB RAM, ATI M3 video card, HD 20005 MB and sound card is EES Maestro 3i. After trying to do something with Windows 2000 which was installed on the machine, I decided to put Linux without keeping windows on the machine. First I try with Xubuntu (latest version) which was working but slowly, then I found that Debian could work fine on that machine. I have installed latest version 5.08 and was surprised how goodly old machine can work. I solved problems with screen resolution (change from 800x600 to 1024x768) but I couldn't find solution how to fix problem with sound.
Actually I don't have sound on the machine. I looked for a linux driver for that sound card and Dell is only providing windows drivers. Then I found that I can solve the problem with ALSA drivers but I couldn't find the easy way (or any way at all) to install drivers and to get back the sound. When I click on 'Volume Control' (top right corner of the screen) I get the message: 'Volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured.'
i've been having this problem since lucid, in both ubuntu and kubuntu, though im currently running kubuntu wich is why i tagged it that way.I open k3b, and it immediately tells me there's no optical device/drive...Then i "wodim --devices" and it returns
Code: wodim: Overview of accessible drives (0 found) : well that sucks, next stop "wodim --scanbus"
I just installed Maverick on a brand new system last Saturday. Everything worked, except dual monitors, so I activated the proprietary ATI/AMD driver. That allowed the dual monitors to work, except that it put a little "AMD unsupported hardware" watermark in the lower right-hand side of each screen. After a day or two, I decided to go back to the default driver while trying to figure out how to avoid the watermark.
I assumed that when I deactivated/removed the proprietary driver that it would automatically switch back to the default. Instead, my computer now boots to TTY1, and when I try to install xserver.xorg, etc., I get a lot of error messages,ike "No screens found" or "Screens found, but configuration is unusable," etc. The same messages show up in the logs.Can anyone help me get back to a useable desktop display? At this point, I don't care which one. erhaps the proprietary would be easiest since it seems to be holding my system hostage, but either one would work.
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.
Resolved the issue of the display, now on to the grub menu.
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I use gMTP for transferring files between tablet/ phone and my PC. Since like a week ago when I try to connect, I get "Detect: No raw devices found" error.
lsusb -v -d 2970:2008 returned Code: Select allBus 003 Device 009: ID 2970:2008 Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00
i'm quite new to Fedora, altough i'm now installing it on my second computer, a desktop pc,it is old (4 years or so), and has an ASUS M2N-SLI DELUXE URL... which worked fine under windows XP and had no problems.Now, after i've installed Fedora 13, i've found out that it isn't recognized, i'm unable to connect to internet, or to any other device, because under the network management window there are no network devices to select.
I have OPENsuse 11.4 64 bit. I installed 3.11.7 and performed hp-check -t and no problems were reported; yet I cannot seem to configure my HP printer. I work through hp-setup, following the instructions; it recognizes my network, recognizes the printer, says that it's managed to configure it, asks me to remove the usb connection and offers me the 'finish' button. When I click on the finish button it automatically pops up the the message 'no installed hp devices found' - the point where I started!
I am a member of groups sys and lp - hp-setup automatically configured this. Attached is the output from hp-check -t... hp-check -t HP Linux Imaging and Printing System (ver. 3.11.7) Dependency/Version Check Utility ver. 14.3 Copyright (c) 2001-9 Hewlett-Packard Development Company, LP This software comes with absolutely not working. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log ..... Initializing. Please wait ..... | SUMMARY | No errors or warnings. Done.
I have a problem with my hard disk...this HHD had no OS just data in some linux file system....i tired to plug it in a windows OS and backup the files....but now the HHD file systems shows RAW. Now when i plug in fedora 15 OS the HHD is not mountable. I tried to # grub-install /dev/dbc1 but it give me an error. error "Bios driver not found" What can i do to restore my file system so i can recover my data?
While installing Fedora 12, no devices were found on which to create file system (see attch.). I get the same message either on Live CD or DVD boot start. It looks like Fedora do not see my hdd. But Palimpsest can see my hard drive (see attch.)
Hdd is on my NForce 4 Ultra m/board and connected via "sata". Also I have raid controller on my board. But it is not in use: I turned it off in bios.
I know Ive been a lil redundant, there are a lot that has been said about this cam, some made them work, others not. My point is, I haven't. Once it worked, about 2 years ago, but suddenly after the Jaunty updates it has stopped.
It's been years since I've set up a Linux machine and I am getting a "no valid devices were found on which to create new filesystems" during a Centos install on a Asus P5BV-C/4L motherboard. I am assuming that there is a raid driver that needs to be installed, but when I went to the asus download site, selected linux/P5BV-C/4L and downloaded all of the available drivers, I keep getting errors saying "Driver disk is invalid for this release of Centos".
I take the zip file, extract it down to the .img file, burn it to disk and try to load it after running a "linux dd". Is this the correct way of doing it? Am I using the correct file?
I am running the newest Nvidia driver from nvidia.com, version 260.19.44. The built in proprietary Nvidia driver does not work properly.
Recently ubuntu was updated to a newer kernel 2.6.35.27 from 2.6.35.25. Under 2.6.35.25 the driver is working. Under 2.6.35.27 the desktop is not starting, and I can login to a 'console'. After login i try to run startx, and gets some errors. See attached Xorg.0.log.
I have installed Imgburn and it wont detect my cd drive, I configured wine and everything and no matter what I can't get it to recognize my driver, what am I to do?
Why is it that FC6 installs just fine from a USB CDROM in an external enclosure but FC12 boots from the CD asks to install or upgrade an existing system but then stops at no devices found and wants the install path for the install image? It appears to see the CDROM, boots then looses its mind and forgets a CDROM was attached.
I dl the windows installer one and ran it. As it started it went to the Ubuntu logo and then my screen became half full of different colored horizontal lines, so I rebooted and went into the adv boot and ran the install under safe graphics mode. Now when I boot I get options to boot into 2.6.32-25 and also a recovery and also 2.6.32.24 and a recovery. I left the 2.6.32-25 highlighted and it booted but gave me a msg that said:
(EE) VESA: Kernal modesetting driver in use, refusing to load. (EE) No devices detected.
Then it goes to a screen that allows me to boot in a low graphics mode. It loads and I dl some security updates with the Update Manager. What do I need to do in order to boot w/o any faults and also what is the difference from 2.6.32-25 and 2.6.32-24? Which should I be using? Do I need to modify my graphis somehow?
