General :: P5BV-C/4L No Valid Devices Were Found On Which To Create New Filesystems
Feb 10, 2011
It's been years since I've set up a Linux machine and I am getting a "no valid devices were found on which to create new filesystems" during a Centos install on a Asus P5BV-C/4L motherboard. I am assuming that there is a raid driver that needs to be installed, but when I went to the asus download site, selected linux/P5BV-C/4L and downloaded all of the available drivers, I keep getting errors saying "Driver disk is invalid for this release of Centos".
I take the zip file, extract it down to the .img file, burn it to disk and try to load it after running a "linux dd". Is this the correct way of doing it? Am I using the correct file?
View 1 Replies
ADVERTISEMENT
Jul 12, 2010
when i want to install centos 5.5 i take this error:
An error occurred - no valid devices werefound on which to crate new file systems.
my hardware specification is:
motherboard: gigabyte p55a-ud3
ram: ddr3 crucial 4gb
cpu: corei5 750
hdd: 2X1TB wd black edition raid1
View 8 Replies
View Related
Nov 19, 2009
While installing Fedora 12, no devices were found on which to create file system (see attch.). I get the same message either on Live CD or DVD boot start. It looks like Fedora do not see my hdd. But Palimpsest can see my hard drive (see attch.)
Hdd is on my NForce 4 Ultra m/board and connected via "sata". Also I have raid controller on my board. But it is not in use: I turned it off in bios.
View 14 Replies
View Related
Mar 29, 2010
I have been trying to get this web cam working for a long time. lsusb:
Code:
Bus 004 Device 003: ID 06a2:0003 Topro Technology, Inc.
dmesg
Code:
[ 1990.570050] usb 4-1: new full speed USB device using uhci_hcd and address 3
[ 1990.751460] usb 4-1: configuration #1 chosen from 1 choice
Kernel patch: [URL]
Driver project: [URL]
Cheese simply says no camera found. Skryba says no devices found. Since this kernel patch was 2009-04-07 which is nearly a year ago it should be in latest kernel?
[Code]...
View 3 Replies
View Related
May 24, 2010
I'm having a problem installing Tor. I've installed it successfully a few times before thanks the excellent guide at: [URL] The error I'm having is when I request the gpg key:
Code:
ocean@ubuntu:~$ gpg --keyserver keys.gnupg.net --recv 886DDD89
gpg: requesting key 886DDD89 from hkp server keys.gnupg.net
Then after quite a delay all I get now (instead of "OK") is:
Code:
gpgkeys: HTTP fetch error 7: couldn't connect to host
gpg: no valid OpenPGP data found.
gpg: Total number processed: 0
View 3 Replies
View Related
Jun 20, 2010
Recently I bought a Toshiba NB100 from a family friend. All was going well until I installed some updates and now when I try to unmute my speakers I get this error message pop up.....
"No volume control GStreamer plugins and/or devices found"
View 2 Replies
View Related
May 31, 2011
When I try to use sudo, I get this error message.
Code:
sudo: /etc/sudoers is owned by uid 1000, should be 0
sudo: no valid sudoers sources found, quitting
View 6 Replies
View Related
Mar 25, 2010
I have installed vmware in windows server 2003 enterprise edition. When I installed I changed the default installation folder from c: drive to i: drive, as I do not have space in c: drive. After I captured red hat linux cd in vmware and reached partitioning section and continued I got a message like "an error has occured no valid devices were find on which to create new file systems, please check the hardware for the cause of the problem". The machine is IBM server....
View 1 Replies
View Related
Jan 21, 2011
I was changing some file permissions with the chmod 777 command and i accidentally executed:
Code:
sudo chmod 777 /*/*/*/*
and now i can't get root access to anything. If I try executing a sudo command i get:
sudo: /etc/sudoers is mode 0777, should be 0440
sudo: no valid sudoers sources found, quitting
View 9 Replies
View Related
May 2, 2010
In Elastix, I get to amportal.conf via the /etc/ director. The file tells you:
[Code]...
It appears that AMPADMINLOGO=logo.png is calling out to something that is not there. I can't even find AMP directory. See below. Do I need to create a directory? This is the result of an ls -F at my /etc/ dir:
[Code]...
View 1 Replies
View Related
Jun 6, 2010
If i create a samba share to one of my lost+found folders so i can copy stuff to somewhere else, will that cause a problem? I'm thinking not, but since its a special folder wanted to make sure.
View 6 Replies
View Related
May 29, 2010
i've been having this problem since lucid, in both ubuntu and kubuntu, though im currently running kubuntu wich is why i tagged it that way.I open k3b, and it immediately tells me there's no optical device/drive...Then i "wodim --devices" and it returns
Code:
wodim: Overview of accessible drives (0 found) :
well that sucks, next stop "wodim --scanbus"
[code]...
View 9 Replies
View Related
Sep 3, 2015
I use gMTP for transferring files between tablet/ phone and my PC. Since like a week ago when I try to connect, I get "Detect: No raw devices found" error.
lsusb -v -d 2970:2008 returned
Code: Select allBus 003 Device 009: ID 2970:2008
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
[Code] .....
View 2 Replies
View Related
Aug 14, 2010
i'm quite new to Fedora, altough i'm now installing it on my second computer, a desktop pc,it is old (4 years or so), and has an ASUS M2N-SLI DELUXE URL... which worked fine under windows XP and had no problems.Now, after i've installed Fedora 13, i've found out that it isn't recognized, i'm unable to connect to internet, or to any other device, because under the network management window there are no network devices to select.
View 4 Replies
View Related
Feb 25, 2010
Up until about a week ago using Kubuntu 9.10, the sound on this computer was fine, but now every day when I turn the computer on I have no sound and I get a notification from Phonon saying:
The audio playback device NVidia (ALC883) does not work.
Falling back to.
If I turn the computer off and then back on, sound is working again. code...
View 1 Replies
View Related
Jul 30, 2011
I have OPENsuse 11.4 64 bit. I installed 3.11.7 and performed hp-check -t and no problems were reported; yet I cannot seem to configure my HP printer. I work through hp-setup, following the instructions; it recognizes my network, recognizes the printer, says that it's managed to configure it, asks me to remove the usb connection and offers me the 'finish' button. When I click on the finish button it automatically pops up the the message 'no installed hp devices found' - the point where I started!
I am a member of groups sys and lp - hp-setup automatically configured this. Attached is the output from hp-check -t...
hp-check -t
HP Linux Imaging and Printing System (ver. 3.11.7)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with absolutely not working.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).
Saving output in log file: hp-check.log .....
Initializing. Please wait .....
| SUMMARY |
No errors or warnings.
Done.
View 9 Replies
View Related
Nov 6, 2010
I`ve boot my laptop by centos. then my devices cant be found.
View 1 Replies
View Related
Jun 2, 2011
I wanted to create a name server for my website. so I did changed /resolv.conf , $
/nameserverips
like this =>
cat /etc/resolv.conf
[code]....
View 6 Replies
View Related
Feb 3, 2010
Why is it that FC6 installs just fine from a USB CDROM in an external enclosure but FC12 boots from the CD asks to install or upgrade an existing system but then stops at no devices found and wants the install path for the install image? It appears to see the CDROM, boots then looses its mind and forgets a CDROM was attached.
View 13 Replies
View Related
Mar 22, 2011
I have Disk /dev/cciss/c0d1: 599.9 GB, unallocated on CentOS release 5.4 .
I need to create about 30-40 LVM's worth 500GB as raw devices for sybase . is there a way to script it or anyone already has it ?
The problem is that each time we need to do fdisk /dev/cciss/c0d1 and enter the partition no to create a new one .. how to overcome that problem and automate it in a script ?
View 3 Replies
View Related
Sep 30, 2009
i used my windows box to connect to ftp(fed box) and i keep getting an error saying "The requested name is valid, but no data of the requested type was found." does anyone know why i cant connect?
View 1 Replies
View Related
Sep 2, 2010
I'm brand new to debian and quite new to unix based systems in general.
I just switched to debian from ubuntu in search of something different and I want to find a system that works for me before I settle down.
I DO NOT HAVE A SECONDARY OS
just two problems I have with debian:
No sound
Error message: No volume control GStreamer plugins and/or devices found.
When I try to open sound from the speaker icon at top right.
I think it's a driver issue but Its not as easy as ubuntu was lspci:
My trackpad also does not work so I have to open documents manually if I don't bring my mouse to class.
View 3 Replies
View Related
Dec 25, 2010
I want to know what file system there are for "/dev" directory??apparently different types was developed for managing devices on Linux.because I am a little confused about all file system on this directory.Another question is,which is file system sufficient for managing devices on Embedded Linux ?of course on our embedded system we do not have many pluggable device,so this directory can be static
View 2 Replies
View Related
Sep 30, 2010
I'm now using Ubuntu 10.04 with ext4 and for the second time in my life I experienced data loss (not for real: I got backups) and I'm assuming problems with the recent ext4 fs.
I want to restore all of my configurations (/etc and the like), data and home on reiserFS: is this possible? What to do in order to accomplish that?
View 2 Replies
View Related
Feb 14, 2011
I am tired of watching fsck check my filesystem when my eeepc 901 shuts down abruptly due to a crash. I know that with a journaling filesystem, I won't have to wait for a check. However, I am well aware of the poor I/O performance of the SSD, so I can imagine using a journaling filesystem being even more frustrating, since there will be constant writes to the journal? I will buy a new laptop without such a crummy ssd someday but, is there anything I can do now, on the software side of things?
View 3 Replies
View Related
Dec 27, 2010
I need to combine 6 different filesystems into one filesystem using rsync. I am so confused as to which parameters I need to use. The 6 fileystems are:
/mnt/tkpkgc1a/vol/mn_pkg_08_02/
/mnt/tkpkgc1a/vol/mn_pkg_08_01/
/mnt/tkpkgc1a/vol/mn_pkg_06_09/
[code]....
View 1 Replies
View Related
Jul 5, 2011
I accidentally unmounted filesystems using umount -a command.How to recover from this.
View 4 Replies
View Related
Apr 25, 2011
I have many disks and volumes in my system. Some of disks IDE, some SATA.
Volumes on SATA disks cause me problems - I have them listed in etc/fstab, but on every boot, they have different name:
/dev/sdd* becomes /dev/sdb*
/dev/sde* becomes /dev/sdc*
etc. on every boot.
1) Why is this happening?
2) How can I prevent it?
3) If I can't, is there a workaround?
View 2 Replies
View Related
Aug 29, 2010
When I try to start up 9.10 I can get past GRUB but not fsck. A file check will be started but no progress will be made and finally I get the 'General error mounting filesystems'.Trying in recovery mode I get this just before the fsck check
Quote:
fsck from util-linux-ng 2.16
[8.016378] ACPI: I/O resource piix4_smbs [0xb00-0xb07] conflicts with ACPI region SOR 1 [0x0b00-0xb0f]
/dev/sda1 goes fine
Quote:
/dev/sda3 has been mounted 34 times without being checked, check forced
mountall: canceled
[Code]...
This seems to be slightly different than the other threads I've seen discussing this issue. It just all of a sudden happened, I didn't upgrade anything or have any crashes immediately prior.
View 2 Replies
View Related
Nov 12, 2010
I want the filesystem of my external drive to be checked periodically after a numer of mounts. I put 2 in the sixth colums of fstab for this partition
Code:
/dev/sdb1/mnt/hdext3rw,dev,sync,user,noauto,exec,suid02
and I use the tune2fs to set the maximum mount count to 32.
Code:
tune2fs -c 32 /dev/sdb
now the mount count is 34 and the date of the last check is not recent, so apparently the auto fsck has not been performed. Probably because this partition is not mounted at start-up but I usually mount it manually.
View 3 Replies
View Related
