I have recently moved from an Nvidia 9400 GT to a ATI HD 5670 but im having a little trouble getting ubuntu to run properly with the new graphics card. I have uninstalled all of the old installed graphics drivers for my nvidia card and have tried to install all of the ati ones.
View 9 RepliesI have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies View RelatedI have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies View RelatedMy UC-LOGIC Maner 850 tablet can't fully functional under fresh debian testing "Jessie".
Code: Select allLinux debrain2 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) x86_64 GNU/Linux
lsusb reports:
Code: Select allBus 002 Device 004: ID 5543:0062 UC-Logic Technology Corp.
dmesg reports:
Code: Select all[66297.932082] usb 2-6: new full-speed USB device number 4 using ohci-pci
[66298.145070] usb 2-6: New USB device found, idVendor=5543, idProduct=0062
[66298.145083] usb 2-6: New USB device strings: Mfr=5, Product=6, SerialNumber=0
[66298.145088] usb 2-6: Product: Maner850
[66298.145093] usb 2-6: Manufacturer: UC-LOGIC
[CODE].....
It looks it should functional well, but... Pen make responses to click (push down the tip), but no luck at move the pen(the pointer won't move, mouse working smoothly)
I have been googled for hours, people occasionly have 'pen moves but no response at click' or even not detected by kernel ...
when i start uubuntu it automatically goes to tty with out letting me login. then when i press startx it says:
NVIDIA: failed to initialize the nvidia graphics device pci:0:13:0
nvidia: please check your systems kernal log for additional erroe
nvidia: messages and refer to chapter 8
nvidia: failed to initialize the nvidia graphics device!
nvidia: screen found, but none have a usable configuration
fatal screen error: no screen found
right before this i had activated a nvidia graphics device
I am thinking of buying the ATi card. Two things I would like to know from other ATi users:
1. Does compiz-fusion work without issues?
2. Given I have an i7 920, given there is no vdpau for ATi; the i7 should be able to handle the strain of say a 1080p video with little fuss?
before i installed ubuntu My pc had had an installed nvidia geforce 6200 256MB graphics plus an onboard intel graohics. it was for times that i wanted to install ubuntu on my pc, but it failed. so i tried to remove the nvidia and install ubuntu with the onboard graphics, and it was successful , i managed to install ubuntu 10.04 amd64 on my pc. now i want to reinstall the nvidia card but i can't. when i put it on my pc and turn it on and chose ubuntu from grub it fails to load ubuntu.so i tried to first install "NVIDIA-Linux-x86_64-180.60-pkg2.run" and then assemble the nvidia card on my pc. but "NVIDIA-Linux-x86_64-180.60-pkg2.run" fails to install.the nvidia-installer.log file is attached to this post.
View 3 Replies View RelatedI'm running Ubuntu as a guest virtual machine (via VirtualBox) on a Windows 7 machine and have a LOT of problems with getting the graphics to work properly... I've tried for a couple of days now without success. I don't know if the problem is with VirtualBox or Ubuntu, but I'll try to post it here if anyone has any suggestions.
View 3 Replies View RelatedI have a nvidia Geforce 8500 on my 10.04 system - the driver I'm using is: NVIDIA accelerated graphics driver (version current) [Recommended]. When I look at System/Preferences/Monitors I am asked if I want to use the vendor's graphics tool and up pops the NVIDIA X Server Settings window. How do I enable 3D acceleration?
View 2 Replies View RelatedI'm just starting out with ubuntu (10.04), and installed it using a live cd on my alienware m5500. I had the update manager update everything, and then went looking on how to properly use my nvidia graphics card (geforce go 7600) because the graphics weren't looking very good, and I couldn't use any desktop effects.
I followed the directions found here in order to blacklist nouveou and enable the current nvidia driver. However after rebooting, and every time I time I turn on the computer, it never makes it to the desktop, i usually end up seeing the ubuntu startup and/or the nvidia logo before it proceeds to one of several screens (none of which allow me to click or type, although sometimes i can move the mouse).
-black screen
-black screen with light gray bars top and bottom
-black screen with vertical green line
-orange and purple horizontal stripes
-purple and light purple horizontal stripes
Thinking that it could be one of the listed bugs from the directions, I followed the work around for "Screen Blanks/Monitor Turns Off", but the problem persists. I have used the live disc to do a fresh install and attempt it about 3 times.Anyone know what this could be, or have advice for troubleshooting? Let me know if I can provide any other information that may prove useful - I'm fairly new to linux in general, but I can probably get some information from recovery mode if I've got a little guidance.
There's no login screen and I can't get to a tty. I have tried editing xorg with the backup, but the name of the driver is the same.Is there anyway to roll back the driver from a livecd?
View 9 Replies View RelatedA few days ago, I upgraded my system from the EOL 9.04 to 10.04LTS. This did go relatively well, though the upgrade process reported some "could not update" errors for the NVIDIA drivers and at the first boot it reported it had to start in low graphics mode. I noticed that I had manually installed drivers from NVIDIA's website before the upgrade, while afterwards the hardware drivers from the package manager had been enabled. I then disabled Ubuntu's drivers, and attempted to manually reinstall NVIDIA's own drivers.
This resulted in some errors related to the install script not being able to find some vdpau related stuff. Something interesting then occured. As root everything worked flawless, but as normal user I still ended up with errors resulting Ubuntu to continue in low graphics mode. So I enabled the package managers driver again. This seemed to solve all issues for the next 5 boots. Until this morning, I again get a black screen with only a blinking "_" on the screen for quite some time, after which (nice feature) Ubuntu proposes to continue in low graphics mode.
Here is a relevant part from my syslog:
Aug 10 08:17:53 linux kernel: [24.075265] [TTM] Zone kernel: Available graphics memory: 1028724 kiB.
Aug 10 08:17:53 linux kernel: [24.075275] [drm] nouveau 0000:04:00.0: 256 MiB VRAM
Aug 10 08:17:53 linux kernel: [24.097167] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
Aug 10 08:17:53 linux kernel: [24.098283] [drm] nouveau 0000:04:00.0: Allocating FIFO number 1
Aug 10 08:17:53 linux kernel: [24.102934] [drm] nouveau 0000:04:00.0: nouveau_channel_alloc: initialised FIFO 1
Aug 10 08:17:53 linux kernel: [24.103515] [drm] nouveau 0000:04:00.0: Detected a DAC output
Aug 10 08:17:53 linux kernel: [24.103518] [drm] nouveau 0000:04:00.0: Detected a TMDS output
Aug 10 08:17:53 linux kernel: [24.103521] [drm] nouveau 0000:04:00.0: DCB encoder 1 unknown
Aug 10 08:17:53 linux kernel: [24.103522] [drm] nouveau 0000:04:00.0: Detected a DAC output
Aug 10 08:17:53 linux kernel: [24.103526] [drm] nouveau 0000:04:00.0: Detected a VGA connector
Aug 10 08:17:53 linux kernel: [24.103577] [drm] nouveau 0000:04:00.0: Detected a DVI-I connector
Aug 10 08:17:53 linux kernel: [24.858579] nvidia: module license 'NVIDIA' taints kernel.
Aug 10 08:17:53 linux kernel: [24.858583] Disabling lock debugging due to kernel taint
Aug 10 08:17:54 linux kernel: [25.401599] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
Aug 10 08:17:54 linux kernel: [25.632700] NVRM: The NVIDIA probe routine was not called for 1 device(s).
Aug 10 08:17:54 linux kernel: [25.632704] NVRM: This can occur when a driver such as nouveau, rivafb,
Aug 10 08:17:54 linux kernel: [25.632705] NVRM: nvidiafb, or rivatv was loaded and obtained ownership of
Aug 10 08:17:54 linux kernel: [25.632706] NVRM: the NVIDIA device(s).
Aug 10 08:17:54 linux kernel: [25.632708] NVRM: Try unloading the conflicting kernel module (and/or
Aug 10 08:17:54 linux kernel: [25.632709] NVRM: reconfigure your kernel without the conflicting
Aug 10 08:17:54 linux kernel: [25.632710] NVRM: driver(s)), then try loading the NVIDIA kernel module
Aug 10 08:17:54 linux kernel: [25.632711] NVRM: again.
Aug 10 08:17:54 linux kernel: [25.632713] NVRM: No NVIDIA graphics adapter probed!
I got Linux Ubuntu because my Vista installation messed up, and I couldnt find the recovery CD. Im pretty glad I installed Linux, as it seems really freidnly, and a bit more open that Windows, I must admit. The problem is, I am trying to install my Nvidia GeForce 8600GTS on the system, and it isnt working. It was working fine on Vista before, so it shouldnt be a hardware problem. I have followed various instructions on websites, whioch take me throguh some stuff about stopping GNOME, removing * linux restricted module * and so on. But when I get to the crucial point, with the agreements and installations for Nvidia, it tells me it cant detect any graphics cards.
View 11 Replies View RelatedAfter upgrading (from 10.10), i get a line command prompting for login. I cannot get past this line/prompt. How do I bypass this prompt? So that I can access a prior version, if possible.
View 5 Replies View RelatedThis is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
I'm running Karmic on AMD64x2, and I have Compiz. I have been running fine, but when I run top, I see that compiz.real always takes up 100% of one of the cores of my CPU. this happens even when I change the visual effects to none in the appearance preferences. This problem starts as soon as I log in. My graphics card is an nvidia 8400gs, which is not that good, and I've installed my drivers using envy. Does anyone have any ideas about this problem?
View 4 Replies View RelatedAfter a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
View 9 Replies View RelatedAfter having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.
The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.
What is causing this graphic distortion?I dropped Vista because this problem would crash the video driver and pop a black screen for a few seconds over and over and over and over.Now that I installed ****ING Ubuntu it's doing this problem, but without the black screens and only messed up graphics show.So what the heck guys, is this a hardware or software problem? And this same type of graphic distortion appears in games like Combat Arms and Halo.I am so SICK of NVIDIA never ever in my whole entire life will I ever buy NVIDIA again! Luckily for nvidia I'm only 17 years old and have 40 years of life left to buy computers without nvidia in them. Until I save up dough for a new computer "without nvidia" I'll keep trying to fix this. P.S this nvidia chip is tied down to my motherboard.
View 7 Replies View RelatedI activated my graphics card on Linux Mint which is Nvidia GEFORCE GT 130M. Now when I boot up, after bios the loading screen looks like in the picture (sorry its crappy quality). When it gets to the login screen and afterwards it is just blank, but i can tell its running underneath because i can shut down by doing ctrl alt backspace and then tab and enter. I tried entering recovery mode but it was the same. Atm im using a live cd.
View 2 Replies View RelatedI am having problems installing the graphics driver (from the Nvidia website) for my Nvidia Vanta card on Ubuntu 10.04. I disabled X via terminal and then I ran a Virtual Console. With the virtual console I ran the chmod command and the went through the installation. It did bring up a message with something about my distro not having a pre-configured script (or something like that) and asked me if I would like to continue anyway. I choose Yes and the installation failed.
View 2 Replies View RelatedI cannot get my driver to work in 10.04 LTS. I've googled all around and still can't fix this. Randomly when I boot up it says ubuntu is running in low graphics mode. It was working yesterday. I had this problem before and it just randomly fixed its self. I have an Nvidia 320m graphics card with drivers from the hardware drivers program.
Heres my xorg.conf file ...
Code:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24
EndSection
Section "Module"
Load"glx"
EndSection
Section "Device"
Identifier"Default Device"
Driver"nvidia"
Option"NoLogo""True"
EndSection
Installed Ubuntu 11.04 but i don't know how to install my nvidia 7200 gs graphics card. in the previous versions (ubuntu 9.10) it installed very easly.. But in Natty 11.04, while i am try to install my driver it fails 2 times and after installation (reboot) ubuntu freezes and not working So reinstalled ubuntu 11.04.
View 3 Replies View RelatedI'm just about to install Alien Bob's multi-lib packages for Slackware64. Everything looks easy, but I've got a question about this part of the instructions:
Quote:
After installing the -compat32 packages, you may have to re-install your binary Nvidia or Ati video X.Org drivers. These driver packages contain both 64bit and 32bit libraries to be maximally useful on a 64bit multilib OS. If you installed the driver files for both architectures, the mesa-compat32 package will overwrite some of the 32bit library files.
On the other hand, if you originally only installed the 64bit driver libraries for your Nvidia/Ati card, it is recommended after installation of the multilib packages, to re-install the binary driver package. This time, choose to install the 32bit driver files as well.
The graphical 32bit applications that you are going to run on your multilib installation will require these 32bit driver libraries. Crashes are likely to occur if you fail to install the correct files.
Right now, I'm on pure 64-bit Slackware64-13.1, and I'm using the Nvidia driver from Slackbuilds.org (along with the nvidia-kernel and libvdpau packages from there too).
So:Do I have both 32- and 64- bit bindary drivers installed as part of the package from Slackbuilds.org?
Could I avoid all this hassle by simply not installing the mesa-compat32 package?
If I do need to reinstall the Nvidia binary driver, do I just upgradepkg --reinstall nvidia-driver-195.36.15-x86_64-1_SBo.tgz?
I attempted to install restricted drivers using jockey-gtk, was told to reboot and drivers would take effect. Rebooted and got no graphics, after some finagling I was able to delete xorg.conf and I now have horrific looking graphics. Defaulted to current version or 195 (which is also the only option I see in the jockey tool, however in synaptic/apt I see I can install other versions.
View 5 Replies View RelatedI have ubuntu 10.4 32 bit. I have 2x gtx 285's in sli that work perfectly fine in sli in windows (so its not a hardware not properly physically installed issue). But in ubuntu in the x server settings only one of the cards shows up. I was wondering if this is a 32 bit issue as in the past running 64 bit they have both shown up fine.
View 6 Replies View RelatedI have a problem with starting ubuntu 10.10, I changed my graphics card from an ATI card to a Nivida card a week or so ago (Machine has dual boot). I've sort out the windows install, but cant get into ubuntu to update the drivers. It boots as far as console but just leaves me with the text screen. How do I update the drivers from there or get a basic console screen to come up so I can update?
View 1 Replies View RelatedI have already installed Debian testing and now looking to install Nvidia drivers version 190.
I had downloaded the Nvidia driver from their site but the way it installed on Ubuntu is not the same here in Debian. Obviously, I failed.
How do I use the proprietary graphics for my nvidia card?
I use KDE, and I've installed both kmod-nvidia and akmod-nvidia, and when I went to activate the special affects I ran into problems. I had to use Xrender for it to work at all (and that just went really slow) whereas OpenGL just made my screen go black, with a mouse and window borders if I alt+tabbed.
I reinstalled and only have the default video driver installed (nouveau or something like that) and I'm a bit scared to try prorprietary graphics without a step-by-step guide that works, which I haven't been able to find.
I have a system with two nVidia graphics cards, with monitors connected to each graphics card. I used nvidia-settings to setup a X server for each graphics card. Rebooted with saved xorg.conf file. I do see all monitors displaying their correct image. I am using Gnome 2 supplied with 11.3. The problem is: how do I start applications on the 2nd X server? If I use the application launcher on 2nd X server, the applications appear on the monitors of the 1st X server. I am also unable to move applications windows from one X server to the other.
View 1 Replies View Related