I just installed Kubuntu 10.10 Maverick on my Dell Latitude D820. Everything works great, but when i use the MicroBlogging plasmoid to post a tweet, I can type the text but pressing the Enter key has no effect.
View 1 Replies
How do you enter your password terminal the keyboard doesn't work when I try
View 2 Replies View RelatedMy password doesn't work to enter super user mode in the terminal. this password works for all other administartive uses in and out of the terminal, just not for entering super user mode.
View 8 Replies View RelatedWhen running MC in xterm or gnome-terminal, it doesn't seem to allow the use of Ctrl-enter and Ctr-shift-enter to copy marked files to the command line.
Does anyone know of another way to cause this to happen or a way to enable it under xterm/gnome-term?
I have a new Dell R710 dual processor machine I'm trying to install Fedora 11 x86_64 on (all versions I mention in this post are x86_64 bit). I downloaded the cd iso files, burned them to cd (I don't have a DVD burner), then told my machine to boot to the optical drive.
I get a very brief introduction message about ISOLINUX then the monitor refreshes and gives me the following message: "Press the <Enter> key to begin the installation process."
Naturally, I press the Enter key(s) on my keyboard. Nothing happens. I try Alt ASCII combinations that might mimic an Enter key. No dice. ctrl-alt-delete works, however, and the machine reboots.
My checksums for the iso's are perfect, and the install process triggers perfectly on other machines. Just not this one.
After much vain research, I download the Fedora 11 Live-KDE, burn it to CD and try it. It doesn't work - the same thing happens. I tried the net install, and it doesn't work either.
On a lark, I download the Fedora 10 Live KDE iso and burn it to cd. It works perfectly and skips the "Enter" phrase entirely. I take my Fedora 11 Live KDE disc and put it in another machine and it, too, works perfectly, which leads me to believe my cd burns are fine.
I've also used usb creator to create a bootable USB drive. It doesn't ask me to press enter - it just fails with a really arcane IF=0 error (arcane to me, anyway).
So I'm at a loss. I'd like to install Fedora 11 on this machine, but may end up with Fedora 10 or CentOS if I can't figure this out.
Is there some weird BIOS setting somewhere I'm missing? I find it really weird that my fedora 10 cd works, but my fedora 11 cd does not (but my fedora 11 cd works in other machines).
I am not a new user of linux but the last time I used linux was five years ago.
I am having a hard time using less. It dont want to accept commands immediately. I need to press 'Enter' to accept the command.
Like if I press 'q' to quit, it will echo 'q' and dont do anything. I have to press 'Enter' to make it quit. Same with other commands.
I am using Windows PuTTy 0.60 with ssh to connect to linux machine.
The linux system is: Linux <removed> 2.6.18-53.el5 #1 SMP Wed Oct 10 16:34:19 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
The less version is :
less 394
Copyright (C) 1984-2005 Mark Nudelman
I dont have any problem with vim and more. Only with less.
I have also tried changing the TERM from xterm to vt100. But still the same problem with less.
I was interested in ubuntu, but was unable to enter the site from work, provider said that from his side everything is OK, problems should not be, may be banned my ip address I'm first time here it's not my fault if it is,
View 9 Replies View RelatedI am using KNetworkmanager-vpnc to VPN back to the office from home, the vpn connection works fine - for 15 minutes then I am disconnected. I am fairly certain that this is related to the Phase 1 key lifetime limit. The Knetworkmanager-vpnc GUI does not provide a location to enter this information. I think I found the config file that holds the connection information at /home/<user>/.kde/share/apps/networkmanagement/connections/ I just don't know the proper syntax to put in the file to specify a key life limit. Anyone out there know how to do this? I am using Fedora 14 x64 with knetworkmanager-vpnc 1.0.9-0.28.
View 1 Replies View Relatedthis may not be the right place to ask this, but my sister has a macbook and the keyboard does not want to work. i have looked online and i see that the main cause of this problem is in Leopard (correct me if im wrong). So i was wondering if perhaps using linux would solve this problem or if the problem is more hardware related than os related.
Also, how would i go about booting into a linux cd? since u need to enter some keyboard keys at startup and assuming that won't work, is there another way?
I am pasting sudo commands without problems as a user (ales in my case) and then immediately the ask the user password.
The keyboard seems to be dead, no keys work, not allowing me to enter the password.
Succeeded in connecting to internet using my wll phone. I can now connect using 'wvdial' command in root terminal. But I want to connect through terminal. I tried 'sudo wvdial' command. Then I am asked for my password. But I cannot type my password there. When I type, nothing appears on the terminal window. Ofcourse there's no problem with my keyboard.
View 5 Replies View RelatedI'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies View RelatedI have no idea what happened to my OS(ubuntu10.04).it doesn't give me any option to enter my login name & passwd.i just get a blank(default) login screen.last time when it worked,i was trying to install GTK+2.8,but due to my mistake i deleted glib using cmd (sudo apt-get purge glib)and after that i even tried to launch terminal but it failed to launch.also tried to play media files using vlc but it didn't work.so i tried to restart my os and finally got stuck in the problem.i have no idea what to do,please help.Is there any cmd to see what problem occurred or which package is missing.
View 14 Replies View Relatedhow to make creative web cam working with ubuntu
View 1 Replies View RelatedWhen I installed my 64 bit system of Ubuntu 10.04 the sound worked very well and I were very happy. The problem started however when I installed Skype which uses pulseaudio. As soon as I start skype (or any other application that uses pulse, HoN for example) the applications sound output or input does not work at all. If I have pulseaudio started in some way, applications that I suppose do not use it like spotify or flash player stops to produce sounds. And when I type "pulseaudio" in the terminal it gives me this:
[Code]...
I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies View RelatedWhen I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies View RelatedI just recently (about an hour ago) installed Ubuntu Netbook edition on my old laptop, and I was greeted with the message, that unity could not be run due to some sort of missing driver...fair enough, I was then greeted with the default Ubuntu desktop, I installed all my needed software (wine, google chrome) and installed the missing display drivers. I then rebooted the system, and once again I am stuck with the default desktop, and not the Unity interface. I checked the software center, and it says Unity IS in fact installed.. And yet I cannot make it appear. So now I ask you Ubuntu veterans. How do I make it work?
P.S. I wiped the system of windows, and the computer is an old HP Pavilion DV6000
I have this annoying problem since day one.I am testing out Red Hat RHEL5, everything is fine except DNS look up.If I ping www.google.com, it doesn't work, ping ip address it all works;if I bring up browser, put www.google.com it doesn't work, can't find the name, however, simply put ip address there it works.My DNS seeting seems ok, and the DNS works from Windows box.
View 2 Replies View Relatedi have tried mail function in php to send email from the local host its work for yahoo but not with HOTMAIL whay ! actually i tried to figure it out,
View 1 Replies View RelatedI run "xev" and left alt reads "Alt_L" while right alt reads "ISO_Level3_Shift".
I tried googling it and found this code...
I just wanted to post here to let anyone know how to fix a broken Mic in 10.04. I have an XPS m1530 and was running RC and updating. This was a big problem since I use Skype a lot to talk to freinds and family out of country.I fixed it by removing and re-installing Alsa but this may not be a problem for people installing from the final release ISO.here are the commands you need to run
Code:
sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils
sudo apt-get install linux-sound-base alsa-base alsa-utils
sudo apt-get install gdm ubuntu-desktop
My atl gr key often doesnt work. Since I have an azerty lay-out, I often need this key (fi for typing @).
I tested it with xev and got the following output (first one is for a key that does work, fi alt_l and second output for the alt gr key to show the difference)
alt_l
KeyPress event, serial 34, synthetic NO, window 0x4000001,
root 0x66, subw 0x0, time 1411517, (-111,434), root570,459),
state 0x0, keycode 64 (keysym 0xffe9, Alt_L), same_screen YES,
XLookupString gives 0 bytes:
[Code]....
ssh works fine on root but when i log into my other account, the ssh doesn't work, it just times out when i putty it. I used this to try and start it from terminal in my reg acc, and then as the su.
sudo /etc/init.d/ssh start
After that didn't work i did this
sudo apt-get remove openssh-server
sudo apt-get install openssh-server
sudo /etc/init.d/ssh start
and still nothing. I have no clue why it only works on root and no other accounts.
My awn manager for the awn dock does not seem to want to open. I have tried to open it so I can configure my awn dock to work properly but it does not seem to want to co-operate. Should I uninstall and reinstall it or what?
View 4 Replies View RelatedI just tried a fresh install of ubuntu 9.04 and a new attempt for 3D acceleration with my ATI Radeon Xpress 1150 - AND IT WORKED! thanx to this guide: [URL] glxinfo | grep "direct rendering" was giving a YES and playonlinux in the terminal didn't give the usual "you don't seem to have any 3D acceleration" message. For a few minutes, my happiness was greater then ever (ehum) I installed Jedi Knight II, Jedi Outcast, and it worked. Only I couldn't adjust the screen size or the gamma (and a few other minor video settings). After some install/reinstall of playonlinux and wine I found out something: 3D acceleration didn't work any longer. glxinfo | grep "direct rendering" is now giving
direct rendering: No (LIBGL_ALWAYS_INDIRECT set) and I get the error in Playonlinux that i don't have any 3D acceleration. I want to know how this could happen? My xorg didn't change at all. But for completeness, here it is:
[Code]....
I have tried all the usual stuff like: apt-get cups-pdf and similar things.
Of course I use the proper way (like sudo, etc.) The point is I can't print PDF files. Have a look at the image:
<snip>
I have also modified to the cups-pdf.conf file and have directed it to /home/{USER}/PDF And yes the aforementioned folder (i.e. PDF) exists at its proper place.
So I think the main problem is "P2POutputStream" error which you can see in the image.
or at least, it doesn't seem to. for some reason, my .txt, .doc, .rtf, and other files that shouldn't have the execute bit set often seem to (i think i know why, but that's not important). it's my understanding that this command should, for example, remove the execute bit from all .rtf files recursively (that is, from .rtf files in subdirectories too):
Code: chmod -R 666 *.rtf i've read help and the man page for chmod, and it seems that -R switch should make chmod work recursively, but it only alters files in the present working directory. could someone point out what i'm doing wrong?
When I try to print any PDF from either Acroread or Evince, it doesn't print and the queue tells me the printer isn't connected; and yet, when I print from OpenOffice.org, everything's fine.
View 3 Replies View RelatedIn Ubuntu 10.4 the restart option behaves like log off. It doesn't restart my computer just takes me to a log in screen.
View 2 Replies View Related
