I walked into work this morning and had a message from the system that my root drive had very little space. I traced it down to my message.1 file and kern.log.1 file. Together, they were over 2 GB.I am able to browse the file shares.
View 1 RepliesI am currently creating a usb device driver consisting of mostly read and write commands. It can successfully read/write using the bulk endpoints, however reading from the interrupt endpoint causes a system crash.As the crash happens whilst writing to kern.log, the file doesn't get a chance to close, therefore done of my debug printk calls are saved. Also, I get know response from using the magic sysrq key.
Does anyone have an ideas on how I can get any system information about what's causing the crash, or possible causes of the crash. (Using a usb sniffer running on another pc, I can see that the packet is coming in from the interrupt endpoint).
I'm trying to run a shell script on a kern board (av1100) that shows some text output on the attached screen. The big problem is that the screen goes to blank in like 2 minutes.I'd just like to have the script showing it's output while the thing is on.Isn't there a command to stop the screen from going to blank?p.s. there is no bash available, just #!/bin/sh
Code:
#!/bin/sh
###########################################################
[code]....
I have installed on friday a new distro on my computer, ubuntu 10.04 lts on my 1GB ram and 3Ghz computer. It has dual booting system. Everything worked fine, i have even been using the xwindows and althought i must say that it felt a bit slow in time reaction to my typing still good enough. I left the computer running with no programs, just idle and now my computers screen is dead. I can not see anything.
I restarted the computer and in normal mode it goes black.I started in recovery mode and i manage to get to a console where I type startx and i see the next error.So I had a fresh install, i worked with the xserver (so i do not think is a driver problem) fine until i left the computer without running anything and the xserver crashed.
Just read through some cron manuals. (man -k cron).Didnt understood that much though.I'm a gamer and loosing control over time at nights.
So what i want is that my computer shuts down itself at latest 1:30 am. Do i need to set up the command for each day (monday, tuesday.. and so on) or is there an option simliar to my 'example' below?
€dit: Both examples should do the trick.
Code:
# m h dom mon dow command
30 1 * * 1,2,3,4,5 shutdown -h +5 Get some sleep dude!
30 1 * * 1-5 shutdown -h +5 Get some sleep dude!
Where as 1 to 5 would be all weekdays, but not saturday or sunday morning at 1:30am.If i can shorten it to 1 line instead of 7 lines (one per day of week) that would be great.
I am using squid in my Linux box. I want to allow my office staff that they may use internet from Monday to Friday.The IP range that they are using is 192.168.1.20. to 192.168.1.50 In /etc/squid/squid.conf file under acl tag
Code:
acl weekend time A S 00:00-23:59
acl myoffice src 192.168.1.20 192.168.1.50/24
http_access deny myoffice
is it correct or I have to add some things more to stop internet access only on Saturday and Sunday.
I have one linux server act as gateway which is run on fedora platform. The problem occured recently when it keeps on shutting down itself during the weekend.. I have no idea what caused this autoshutdown. For your info, the server is NOT scheduled to auto-shutdown mode.
View 2 Replies View RelatedI am using squid in my Linux box. I want to allow my office staff that they may use internet from Monday to Friday.The IP range that they are using is 192.168.1.20. to 192.168.1.50n /etc/squid/squid.conf file under acl tagPHP Code:
acl weekend time A S 00:00-23:59
acl myoffice src 192.168.1.20 192.168.1.50/24
http_access deny myoffice
[code]....
I have a list of about 425 servers that are mostly redundant. I need to weed out the duplicate names so that I have a count of only the unique server hostnames. What is a good command to do this?
View 3 Replies View RelatedI am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
I have a 20TB filesystem, xfs formatted. The filesystem has been mounted with the inode64 option, and I now need to NFS export it. NFS doesn't like the inode64 option at all. The NFS clients cannot access any of the directories with inode numbers exceeding the 32bit limit. They get the "Stale NFS file handle" message. I have tried to attach the filesystem to a RHEL5.3 system, and after turning on the no_subtree_check option in /etc/exports on the server, it all works fine. No changes were needed on the clients.
The problem is that I need to get this to work on a RHEL4.4 system. Unfortunately I cannot do any test on that system yet, I then did a quick test on a RHEL4.3 system... and it didn't work. Even using the no_subtree_check option was on any help. I am afraid that this will not work on the RHEL4.4 system either. How to get the inode64 xfs filesystem NFS exported on a 2.6.9 kernel?
Under Place> Documents, Music,Videos, etc. I get the msg file not found. My son set this computer up for me.
View 1 Replies View RelatedThe software I just bought (Lightroom 2.1) contains instructions to get my serial. I downloaded the sofware on my desktop and installed it. In the terminal, I wrote "cd Desktop" and pressed enter, wrote "chmod +x keagan", pressed enter and wrote "./keagan" and I get this message: No such file or directory.Anybody can tell me what I am doing wrong? I am working on Mac OS 10.4.
View 1 Replies View RelatedI want to install drivers for a SensAble Phantom OMNI.I got a package from the SensAble homepage, containing a rpm.So I did:
Code:
sudo alien phantomdevicedrivers-4.3-1.i686.rpm
Warning: Skipping conversion of scripts in package phantomdevicedrivers: postinst postrm
[code]....
I am trying to reinstall ubuntu on my asus eee netbook. When I try to open ubuntu an error message appears saying that this file <windowsroot>system32hal.dll.> is corrupt or missing. How to I reinstall this file/what happened?
View 3 Replies View RelatedIv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies View RelatedI am in the www-data group...
Code:
mike@webserver:/var/www$ groups mike
mike : www-data adm dialout cdrom plugdev lpadmin sambashare admin
when I run ls...
Code:
mike@webserver:/var/www$ ls -la
total 8
drwxrwxr-x 2 www-data www-data 4096 2011-04-22 09:30 .
drwxr-xr-x 14 root root 4096 2011-04-20 18:22 ..
-rw-r--r-- 1 root root 0 2011-04-22 09:24 index.html
I assumed that means that the users in the www-data group can read, write and execute within this folder?
But when I try to create a new file/dir I get permission denied message.
I'm having fun messing around with my new LAMP server, but this problem is annoying me now .
(Oh and the index.html file was created by root, it's a blank file and can be deleted)
I've been using 11.04 Unity, & quite like it. I fired up Blender 2.49b the other day (not used it for a long time) & its behaviour was very erratic. Due to this I decided to reinstall 10.10 for the time being, until October or maybe even the 12.04 LTS. I backed everything up & reinstalled 10.10. I then tried to restore my Evolution from the Natty backup file, which simply didn't work. The message was something about it not being a valid file. I'm assuming this is a non backwards compatibility issue.
Any way getting Blender to work or restoring Evolution? With regard to Blender (in Natty); I've not tried proprietary drivers for my GPU yet as the open source defaults have always been fine, so that's an option. It means another reinstall (of Natty), but that really isn't such a big deal at this point. With regard to Evolution (in Maverick); I found a ppa but I'm unsure how to proceed once I've added it. Would I do an apt-get update & an apt-get install evolution?
I've installed wine several times in ubuntu 11.04 but after the installation when i click on the wine icon it gives an warning message "The file 'wine' is not marked as executable. If this was downloaded or copied from an untrusted source, it may be dangerous to run. For more details, read about the executable bit."
View 1 Replies View RelatedI'm using Bluefish on my laptop to modify files on my desktop web server. The machines are networked with samba. Every time I save the files, I'm prompted with this window that says: File has been modified by another process. It gives me the option to cancel or overwrite. It's the only program that does this. I can click on overwrite and that works, but it's pretty annoying.
View 1 Replies View RelatedWhen I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?
View 9 Replies View RelatedI am migrating an application from HP-UX to Redhat Linux and I have some files of scripts. In one of the script files I have the line /pylive/smartPAY/spserver/scripts/sp.con which is the correct path and file name for an existing file. However I get the message "No such File or Directory/pylive/smartPAY/spserver/scripts/sp.con" The script worked fine in HP-UX, why not in Redhat Linux?
View 6 Replies View RelatedI am getting an error message at step 5 of 8 in the installation process. I am using Ubuntu LiveCD. The caption of the error is 'No root file system' and the message itself says 'No root file system is defined.Please correct this from the partitioning menu.' I enclose a screenshot of this. I had also problems with booting Ubuntu and Windows after installing Ubuntu to an external hard disk so I probably have to also create a new boot menu (may be it is differently called, 'grub' possibly, I am not really sure).
View 1 Replies View RelatedI had to register with a new username, because I could not remember my logon details and have since changed ISP so could not get details sent, anyway that aside to the problem.
I upgraded to 11.04 and all went well (hence posting here and not in the Upgrade section) and it is running fine, well until yesterday.
I ran the update manager as I usually do when first entering Ubuntu and it did an update but then gave me an error message about file permissions and to check my connection (which was connected OK).It has also affected the Software Installer, and now I can not install any new software.
Is this a generic problem with the latest update or is it just my Dell Inspiron 1545 please?
I have installed 4 accounts on my acer aspire 4520 laptop. OS is natty (2.6.38-9-generic), 64 bit distro. Only on one account I can not access the directories / files placed on my desktop. Clicking on Places, in order to open My Documents, for example, does not work.Typing nautilus on the command line, gives the following output:uwe@koch-laptop:~$ nautilus
(nautilus:18297): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.(nautilus:18297): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.uwe@koch-laptop:~$ Removing and reinstalling nautilus solves the problem for that specific session, but not for the following.
Rebooting or shutting-down always is accompanied with a file manager not responding message.
I want to change File NOT FOUND ERROR MESSAGE to my own message buw how come I do this by terminal ?
View 3 Replies View RelatedI am working on the script to parsing the specific message like "aaaa" in multiple log files like N1-***,N2-***,N3-***..The script is to find the list of lof files which contains the message "aaaa" and export the list into excel filE.
View 4 Replies View RelatedI downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I faced a problem while installing ubuntu 10.04 on mylaptop;i downloaded the ubuntu from ubuntu official site. Problem: message coming that no media device is found for live file system. My Laptop configuration : 2.2 ghz core 2 duo processor, 320gb hdd in this matter and can let me know me how can i install ubuntu 10.04 on my laptop.
View 4 Replies View Relatedi've been using some subliminal software on windows for a while now and have found it to be really good. It basically just flashes up a message on screen over the top of whatever is going on at that time but the message is only there for about 30 milli seconds
The message is not there long enough for your conscious mind to read it but the theory is that your subconscious mind will read it.It actually works really well. THe problem is that they dont package a linux version although they do have an OSX version, i'd really like this on ubuntu.
Tried it in wine and it installs but nothing happens after that. Alternatively perhaps somebody can tell me how you could get a message to flash up on screen based on a list of messages in a text file?