I am trying to reinstall ubuntu on my asus eee netbook. When I try to open ubuntu an error message appears saying that this file <windowsroot>system32hal.dll.> is corrupt or missing. How to I reinstall this file/what happened?
View 3 Replies
I have currently installed Xubuntu via wubi on my windows XP. When I try to boot, it displays an error message stating that wubildr.mbr is missing or corrupt and I cannot boot into xubuntu.
View 2 Replies View RelatedI used to have Windows XP Professional on my computer, then I decided to install Ubuntu but it didn't work for me it gave me really weird errors, I thought I uninstalled it, and then I installed Debian on my computer, Debian ran smoothly but when I tried to start Windows the GRUB from ubuntu appeared and when I tried to start windows again it showed and that the hal.dll was missing, I reinstalled Windows but still the same error appeared, this also affected my Debian GRUB so I had to install it again, I don't know what I should do in this case. How can I delete ubuntu's GRUB for good? I've already formatted my windows partition but it keeps using Ubuntu's GRUB.
View 3 Replies View RelatedSo I have a single hard drive with two partitions, and I am trying to install a dual boot of Windows XP and Ubuntu. However, I am having an issue installing the Windows XP component.
I keep getting an error along the lines of a missing/corrupt hal.dll after the first restart in the install. This has happened every time I tried to install windows XP, from several different discs, all of which I have confirmed to work on another computer.
I have tried several things for fixing this, from repairing the MBR and boot.ini to replacing hal.dll from hal.dl_, and nothing works. However, Ubuntu 10.04 installs and boots properly.
What I can do to get Windows to install properly?
First off I must state that I am basically completely foreign to linux. I have 2 hard drives, one with windows 7 and storage partitions, and the other with my linux partition, linux swap, and unpartitioned space.I initially partitioned my drives with Disk Management in Windows 7. I created an NTFS partition on sda and installed Ubuntu from within Windows (a Wubi install I suppose). I originally intended to install by booting from the iso I burned onto a CD,but the installer was failing to load (fonts would change and it would error message). LiveCD was failing to load too in the same fashion. After hitting alt and tweaking the F6 settings, LiveCD successfully loaded (my very first taste of Ubuntu, albeit somewhat bland). I then decided to reinstall Ubuntu with proper linux partitions from within LiveCD. Now when I select Ubuntu in the Windows Boot Manager, a WBM screen says the file:
ubuntuwinbootwubildr.mbr is missing or corrupt. I do not know if this file is the problem or merely a symptom of it Below I have copied my Boot Summary (my apologies for the length and extra partitions):
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda[code]....
I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
I'm trying to install Fedora 11 for the first time. The plan is to create a 10Gig partition on which i would put Fedora and leave Vista on the other partition. I have successfully done this however when i reboot to try and get to VISTA i am seeing an error message saying that BootyMgr is missing....Can you help me with this?
View 10 Replies View RelatedI'm typing this command in terminal ;
Code:
sudo -s
my password then ;
gedit /boot/grub/grub.cfg
My windows (system) disk is in /dev/sda5 but when I look grub.cfg file windows system disk is in /dev/sda1. When I want to save this file I take an error. Could not save the file /boot/grub/grub.cfg. You are trying to save the file on a read-only disk. Please check that you typed the location correctly and try again.
annotation : error in windows is : missing or corrupt <windows root>system32hal.dll.
I was trying to install Ubuntu as a dual-boot on my Windows Vista laptop. The hard drive is 250 gb: Vista boot 157 gb partition; a partially-occupied 33 gb partition which was designated as swap-space; a newly partitioned and ext3 formatted 30gb for the Ubuntu installation. I believe there is also a hidden partition ~20 gb with "hidden" system info. During installation I received an error message concerning the swap space partition, which forced me out of the installation and back to the ubuntu partition manager screen. Now in Vista my 33 and 30 gb partitions are missing. Is there anyway I can get back to pre-Ubuntu state?
View 4 Replies View RelatedI was installing opensuse 11.2 in parallel with windows xp.but during installation suddenly power has gone and after that opensuse is giving me the error message corrupt partition.i am also not able to login in xp. so I decide to reinstall windows, I got the error saying "invalid partition table" after the first restart of windows xp installation.
I tried to use windows system recovery console and committing fixmbr and fixboot commands, but didn't work.
i have 2 window partition(1 for windows and 1 for data).i do,nt want to format 2,nd partition.
How can I installed windows?My plan was first to install windows xp, then opensuse again.
After several crashes during videos it seemed like a good idea to fsck root. Downloaded the latest systemrescuecd and ran it at boot. The error message was 'bad magic number, corrupt superblock' with a suggested command to try another superblock. That failed with the same message. Tried tune2fs to force fsck at boot and got the same message. The drive is less than 6 months old and the installed system is working more or less ok. The command I used was 'fsck.ext4 /dev/sdc2'. What am I doing wrong?
View 9 Replies View RelatedIv installed ubuntu 10.10 onto a usb 4gb pen. EVerything works fine. However I then wanted to encrypt the USB using truecrypt inside ubuntu and got an error message telling me it could not find some file. I then installed virtualbox onto the ubuntu this installed fine,i then installed windows xp and after completion clicked save the state. I then restarted ubuntu and when it loaded up again the virtualbox and windows xp had been deleted. Iv tried this twice just to make sure but same thing both times.
View 9 Replies View RelatedI am getting an error message at step 5 of 8 in the installation process. I am using Ubuntu LiveCD. The caption of the error is 'No root file system' and the message itself says 'No root file system is defined.Please correct this from the partitioning menu.' I enclose a screenshot of this. I had also problems with booting Ubuntu and Windows after installing Ubuntu to an external hard disk so I probably have to also create a new boot menu (may be it is differently called, 'grub' possibly, I am not really sure).
View 1 Replies View RelatedI downloaded linphone 3.30 using mozila and tried installing. while giving the command ./configure it was successful and next giving the command make gives me a error message make file is not found. but makefile.am and makefile.in is already available in the current working directory.
I have given the link of the pastebin for ./configure command and make command..
I use ubuntu 10.10. Everything was great until i formatted my C drive which had win xp. Now at startup an error message occurs instead of booting ubuntu (BOOTMGR is missing. Press Cntrl+alt+delete to restart). I searched a little bit and found that may be I need to install GRUB (boot loader). how do i install grub? using "fdisk -l" .. I found out that my bootable partition is C drive (NTFS /dev/sda1) while ubuntu is installed on another partition (ext3 /dev/sda3)!
View 7 Replies View RelatedI am trying to install a HP deskjet 1000-J110a. I downloaded a driver package thing, and I guess I unpacked it, and I made it, and I thought I installed it. I am totally confused and my brain hurts. The printing troubleshooter is telling me: Missing Printer Driver
Printer 'Deskjet-1000-J110-series' requires the 'foomatic-rip-hplip' program but it is not currently installed. I found something that is the 'foomatic-rip-hplip', but what the heck do I do with it?
When I start acroread (and as far as I can tell it's only that program), I get the error message
But the program still starts, no problem. Happens with both
So, onto my question. I kind of messed up my desktop computer trying to remove Ubuntu 8.10. I had installed 8.10 as a dual boot with Windows XP a few years back and now wanted to remove it mainly because of my mother, who can BARELY even turn a computer on. Plus, I can't connect to the internet anyway with Ubuntu (I need the Netzero dial up application in windows, since all I have right now is dial up).
Here's what I did. I downloaded the program "MBRFIX" so I could directly fix the mbr inside of Windows XP, since I don't have an XP recovery disc. I downloaded MBRFIX because I needed to get rid of GRUB. I fixed the mbr, and Windows XP directly booted. All was said and good, except Ubuntu still existed. I poked around on the internet and found something that said for me to use the Ubuntu Live CD and go to gpartition. It said to delete the Ubuntu partitions. So, I tried that, but it said something about unmounting something (I honestly don't remember what it said).
So, I continued following instructions. It said if you couldn't delete the partitions, to go to the terminal and type in "sudo swapoff" and then "sudo umount -a". So I did that. A bunch of stuff popped up in the terminal, mainly stuff that said "cannot unmount". I tried to delete the partitions once again, but that still failed. Finally, I just went back to Windows XP. I went to my computer, manage, and deleted the Ubuntu partitions from there. Finally, Ubuntu was gone! Of course, I wanted my 50GB space back on my XP, but I still had no clue how to go about putting that back. ........
I had an interesting problem with my workstation this morning. When I booted the system I got a message that the sda1 filesystem was corrupt. I ran fsck on all the unmounted filesystems and found them to be clean. I then booted from the F12 live CD and checked the file systems again using 'Disk Utility' - everything appeared to be clean. However I still couldn't boot the system. I eventually reinstalled F12 from the Live CD.
Seems to be a bit strange as all the checks I ran showed the file system to be OK.
Was I the only one having failure issues trying to install any Debian ISO Yesterday?I got big red screens about corrupt files all while trying to install Wheezy and Jessie.All with ISO versions downloaded and burned yesterday, net install. Disc and DVD.Mint and later Fedora installed perfectly well, but I wanted Debian.
View 1 Replies View RelatedI have recently taken delivery of a Dell Inspiron mini netbook with Ubuntu on, and I am new-fangled .install updates, I clicked the (orange down-arrow) button, and it compalined "E: /var/cache/apt/archives/linux-image-2.6.24-22-lpia_2.6.24-22.45netbook9_lpia.deb: files list file for package `libxcb-shape0' is missing final newline"
View 2 Replies View RelatedI recently lost the default panel from the top task bar, a message appeared on boot up saying a config file was missing or couldn't load - or something to that effect. I didn't realise to what it was referring until the computer (an Acer One) completed its start up and I could see the desktop
How can I restore the panel? (graphic from my other Ubuntu laptop attached showing the default panel appearance)
I am new to Linux and I wanted to setup a dedicated game server on my notebook.
I've installed Ubuntu 9.04. I than created a directory named /home/phlex/kfserver. I downloaded the application binary from Steam. I changed the file permission with chmod +x hldsupdatetool.bin and now the file attributes are -rwxr-xr-x.
The problem is when I try to run the binary file. If I type ./hldsupdatetool.bin I get an error message "-bash: ./hldsupdatetool.bin: No such file or directory. It seems the OS can't find the file. I've downloaded the file several times thinking it may have been corrupt but it's not. I can delete the file, I can rename it and so the file is there. Sometimes Linux can be aggravating to use.
I installed 10.04, and now i cant get back to windows. I have Ubuntu on one hard drive and windows on the other one. When i try to boot up, unless i go to the boot menu and select the hard drive with Ubuntu on it i get the message boot-mgr is missing, press Ctr - Alt - Del to restart.
View 9 Replies View RelatedI finished installation and downloaded updates, went to the Software Center and downloaded Anki. However, when I try to download a language flash-card pack (or whatever it is) I get an error saying the "File is corrupt or not in the Anki database." It says this for any download
View 2 Replies View RelatedDiscovered today that my /share directory is missing or corrupt. All fields (permissions, ownership, inode, etc) read '?'. Will a fsck from single user mode fix this? Tried rebooting several times, etc. All other system functions see to be ok, except all the files in /usr/share are missing, the directory 'share' blinks red and obviously dovecot will not run - which is keeping our IMAP from running.
View 1 Replies View RelatedThis morning I attempted to 'clean' up some old files/programs from my dual mounted (Vista/10.04) laptop. All seemed ok until I tried to run Vista and I got the following:
/windows/system32/winload.exe
status Oxc000000F
missing or corrupt
I then tried to reboot into Ubuntu but it keeps trying to load windows. It looks like I have somehow lost my grub, so now I have lost Ubuntu and Vista. I tried my Vista Start Up disk and at the command prompt I entered:
Bootrec.ext /fixboot
Bootrec.exe /fixmbr
on restart it went back to the 'missing or corrupt' information. Is there some way I get get back to normal?
I'm usin Ubuntu 9.10 and installed it a couple of months ago. I was trying to figure out how to use Synaptic to fix some dependancy errors I was getting, and set it to remove a certain package. It said it had to remove other packages as well to do this, well that ended up being Gnome and a whole bunch of other stuff. Silly me.So I was alright without having Gnome and went back to writing simple c++ from this book. I wrote a program to output a range of numbers and ran it but had written it wrong, so it would have ran on for hours. So I just killed the power and tried to start the comp again.
This time after the Dell boot screen it would tell me my system battery was low and strike F1 to continue or F2 to enter setup. Hit F1 and Im told that a file wasnt found and then it goes to the Ubuntu loading screen (The logo and some dots underneath) and then a black screen. Nothing else.I figured I needed to reintall and dont have any CDs so tried to make a live CD and this time when I try to boot from USB device get a "Missing Operating System" error.Its set to boot from USB device before harddrive. Need to know what to do to install again/recover old install.
I must say, the RPMfusion version of the Nvdia driver package work better with FC10 than they did under FC9 for me, which is to say: they work at all. Still get corrupted output after a few hours of work, but I imagine that's just the underlying weakness of the Nvidia driver bubbling up. Either way, now I have other problems:
First off, the Intel driver for my onboard video setup has stopped working entirely. The attempt to bring up X on the Intel setup gets me to the KDE login screen and locks the machine up hard (poweroff required). A look at the xorg.0.log shows that the server seems to be stuck in a loop trying to determine the valid video properties for the session.
Here's my xorg.conf, BTW. I have it setup to perform different configurations depending on which DefaultServerLayout line gets uncommented (lines 4 - 6). If anybody has a better way of doing this, I'm all ears. While we're on my xorg.conf, pleas view lines 64-67 and/or 75-77. This is my quickie way of changing drivers (again, all ears) which brings us to the next problem, neither the nv or nouveau drivers work with my system. Interestingly enough, both drivers tend to fail in the same relative spot in the process, I think. Please refer to line 207 of this xorg.0.log with the nv driver or line 140 of this xorg.0.log from the nouveau setup. Either way, both sessions die with the same message: (EE) Screen(s) found, but none have a usable configuration. Fatal server error: no screens found Gotta go, x session getting corrupt,,,
I'm trying to install ubuntu 10.10 on xp,but, after waiting around 2 hours per instalation I received a error message that says:" unbuntu installer : and error occurred: coercing to unicode: need string or buffer, none Type found. for more information see log file C:1customerlocals-1 empwubi-10.10-rev197.109. I tried on one particion make just for it then I even tried on xp on C: I even put it on a pendrive but my bios is old and do not provide for usb booting. The other thing I have to try is making a boot cd but for one reason or the other , my recorder do not want to recornized my cds- rw and right now I do not have any regular blank cds . That will be my next step. Note: Ubuntu appears installed on the the control panel "add or removed programs" but not in "all programs" list. I'm a novice on this so maybe the answer was posted but I couldn't find it. Looking ahead to try it and be part of the linux team.
View 1 Replies View Related
