Ubuntu :: Lucid Displays Blank Screen After Boot Splash On Battery Power
May 6, 2010
I'm on HP tx2000 Tablet PC, with nVidia GeForce 6150 Go onboard, 4GB of RAM, Ubuntu 10.04 amd64 Desktop. I keep getting a blank screen after boot splash when I'm on BATTERY POWER. Though I get a blank screen, the screen comes alive when I SUSPEND the laptop by closing the lid, and then RESUME the laptop. Then I can see the logon box and whole desktop.
Usually people get problem by suspending their laptops (usually the screen not coming back after resuming), but now I SOLVE the problem by suspending my laptop. Well like I said I can somehow get the screen right, but I really can't (and don't want to) suspend and resume my laptop every time I boot. Problem occurs REGARDLESS of type of display driver I use. nVidia proprietary, nouveau... whichever driver I use, I get the same conclusion.
View 9 Replies
ADVERTISEMENT
Aug 23, 2010
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
View 2 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
May 10, 2010
when booting my system, I get sometimes a blank screen. I searched around and couldn't find a proper solution. ATI Technologies Inc RV535 [Radeon X1650 Series] The only option I have is to reset the PC and hope for it to boot without the blank screen...
View 2 Replies
View Related
Aug 13, 2011
I have opensuse 11.4 installed with both gnome and kde. These are the things I did before the problem:
1. changed the login screen to oxygen login screen
2. Then I logged off and when again logging in, I chose the session as Metacity.
But unfortunately, the the blank splash screen appeared and it didnt get into the desktop. Then I did a hard restart (By pressing the power button). Since then, I cannot login. The login screen is blank left only a active mouse pointer. Even booting into failsafe also didnt work.
By the way, I have chosen the option of directly logging in without password prompt at login. (during installation)
Only a week before i did a clean install since i corrupted the grub, dont wanna install again.
View 8 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
Jun 27, 2011
Recently i had migrated from windows 7 to fedora 15. i have lot of flipbooks with me and unable to open those flipbooks in fedora. finding a suitable solution to open those flipbooks. is there a software to open these books linux. in windows there is no requirement for special softwares to open flipbook, since it is similar to flv or swf files. i had already tried with wine. with wine the file is opened but do not displays the contents or pages, show a blank white screen. @people who dont know about flipbooks: flipbooks are flash objects usually created from pdf files used for reading, flipbooks simulate the reallife book actions(page turning).
View 1 Replies
View Related
Dec 26, 2010
How can i modify the ubuntu low-resolution fallback splash screen (probably plymouth) which displays the text "Ubuntu 10.10" with progress-dots?
View 1 Replies
View Related
May 23, 2010
I recently installed from scratch the Lucid Lynx, and after changing the direction of the window buttons and a few things more (who was the idiot who thought on having a purple terminal?), I completely loved it.
I had one problem through, is that when I boot my computer, there is no splash shown. After the GRUB menu, all I see is a black terminal with no text for some time, and then a quick view of some colored text. Does anyone else have this problem? Here is the appropriate section of the grub.cfg file:
Code:
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
[Code].....
View 1 Replies
View Related
Nov 29, 2010
i had to reinstall suse coz i mounted my partition to /usr instead of /home. And now i installed some drivers for nvidia gt 320M and restarted the system but it goes blank after the splash screen. how do i get back to the default settings i had? i have a builtin camera in my Acer ASPIRE 4741G laptop. I installed amsn but it only shows a blank screen if i try my webcam.
View 2 Replies
View Related
Jun 17, 2010
I recently upgraded my Karmic to Lucid lynx and the splash screen at startup was missing. i thought i just needed to reboot my p.c and it will be fixed but it did'nt.
View 1 Replies
View Related
Aug 20, 2010
fresh install ubuntu does not boot up shows splash then goes blank.how do i get into boot c-line
View 3 Replies
View Related
Jun 23, 2010
I'm using Ubuntu 10.04 64-bit, which is installed to a second hard drive on my desktop. Earlier this afternoon, there were two 10 second power outages in my neighborhood. The first caused the system to restart with no effect, but after the second outage Ubuntu no longer boots properly. The problem is this: When I boot, I get to the grub screen. I have tried choosing four different options (the most recent kernel, a slightly older kernel, and the recovery mode of each). For each, kernel begins loading, but at a certain point the input to the monitor dries up, and after a few seconds the monitor enters standby mode. When I boot into recovery mood, the last message I see before the screen goes blank includes "udev starting version 151" followed by three lines that read "assuming [something that I can't read before the screen goes blank]." The computer itself remains on, but I have no way of knowing exactly what it is doing.
There seems to be no hardware damage as I can boat into Vista, and I can also boot into 10.04 from a USB. I've used fsck to check the partitions on my hard drive and the test came up clean for all of them. Since I only installed 10.04 a week ago, I could just copy the handful of useful files I have to my external drive and re-install, but I'd like to get some experience troubleshooting this problem. My first assumption is some kind of problem with the video drivers or GUI.
View 2 Replies
View Related
Jan 7, 2011
I have installed a new PC system
- OpenSuSE 11.3, 64bit
- AMD Phenomen II X4
- ASUS M4A88TD-V Evo/USB3
- 3 hard disks
- etc.
After start-up with runlevel 3, no applications running, network is up, the overall power consumption of the PC (without monitor) is ca. 70 Watt. After some minutes the monitor goes to power saving (terminal mode, runlevel 3 !), but the power consumption rises to 120 Watt! After pressing a key on the keyboard (e.g. Num) the monitor leaves the power save mode, shows the login screen, and the power consumption falls to 70 Watt. In parallel I have investigated the system via ssh and running top, but I have not observed any abnormal operation. I looked into /proc/acpi/* but I did not find something unusual.
View 5 Replies
View Related
Oct 5, 2010
The new NVIDIA drivers don't seem to work as seamlessly as back in Jaunty and before. In Lucid when I activated the drivers I had to do some grub tweaks to make my splash look normal... But with Maverick it is even more messed up...
Problem: The splash either doesn't appear at all (black screen) or it appears in the text format rather than graphics... In some instances it even hopelessly tried to load the graphics splash - loaded the background but the instead of Ubuntu logo and the progress-bar animation it displayed a "Ubuntu 10.10" in a monospace font.
View 1 Replies
View Related
Mar 29, 2011
I'm running on a freshly installed win7 (first) ubuntu dualboot system. Splash screen was absolutely perfectly dandy upon fresh install.I updated ubuntu, then the problem occurred. I assume its a video card problem. nVidia GeForce 9800 GTX+ is what have in there.Drivers installed fine and everything, don't know if this is an easy fix or not.What's weird is that the animated dots remain, just in a lower resolution.
4gb RAM
intel i7 860
evga P55 SLI mobo
Didn't mess around much with ubuntu before the problem occurred. I essentially let the updates run and then I restarted right back into Ubuntu and saw the new downgraded splash screen.I'm new to ubuntu and terminal commands so if you suggest a terminal command fix, please be logical in your step by step fix suggestion.
View 7 Replies
View Related
May 7, 2010
I have been unable to get the fancy purple bootsplash (plymouth) since I installed Lucid Lynx on my ThinkPad T43. The bootsplash would up when I had booted off of a Live CD, but all future instances post-install only shows the blinking terminal cursor, followed by the GNOME log in screen. This has occurred after upgrading from Karmic, and after attempting a fresh installation of Lucid. Here's what I've tried so far without success:
comment out "GRUB_HIDDEN_TIMEOUT=0" in the grub file tried running echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash update-initramfs -u under su but it did not work because my conf.d directory doesn't contain a file called "splash", but only one file called "resume". This fix was taken from [URL]..A Google search showed that a lot of users with this problem have NVIDIA cards; however I'm running ubuntu on a system with an ATI card.
View 7 Replies
View Related
Oct 7, 2010
I'm trying to get my screen to turn off whenever I lock my screen. I know that in Power Management, there's an option to turn off the screen after a set amount of time, and I know about xset dpms force off, but the former doesn't allow me to turn off the screen from the logout menu, and the latter only turns the screen off for a short amount of time (1 minute or so. The screen just turns back on by itself).
Is there a script I can modify to change what happens when "Lock screen" from the logout menu is selected, or is there a script I can add to the panel to lock the screen and then turn the monitor off (and turning it back on when I shake the mouse or something)?
View 2 Replies
View Related
May 2, 2010
I just installed Electric Sheep (version 2.7~b12+svn20091224-1ubuntu1) on my Ubuntu Lucid box. When I test the connection in the Preferences window, everything checks out fine, but when I try to run it from the terminal I get the following error:
electricsheep: /usr/lib/i686/cmov/libavcodec.so.52: no version information available (required by electricsheep) electricsheep: /usr/lib/i686/cmov/libavformat.so.52: no version information available (required by electricsheep) electricsheep: relocation error: electricsheep: symbol av_init_packet, version LIBAVFORMAT_52 not defined in file libavformat.so.52 with link time reference Terminated. If I try to preview it using System > Preferences > Screensavers, I get a blank screen.
View 2 Replies
View Related
May 28, 2010
I recently installed Ubuntu 10.04 on my Aspire One netbook, but everytime while booting, I am stuck at a blank screen with a blinking cursor. I've tried reinstalling but to no help. I've also tried installing 9.10, which will boot, then upgrading to 10.04 which then produces the same problem.
View 5 Replies
View Related
Jul 30, 2010
I installed Lucid Lynx on a medium-old system, Athlon 2200+ with an ATI video card. No problems during the install itself. The problem is that when I boot into the login screen, I get a bunch of blank boxes. If I move the mouse around, I can see various areas highlighted, but I can't actually see the menu options. I can type in my username and password to log in (not being able to see what I'm typing), but then the desktop panels are empty boxes - once again I can mouse over them to get empty drop down menus, but I can't see anything else.
I've had enough experience with Ubuntu in the past to do some troubleshooting myself. Usually I would just boot into a terminal, switch Xorg to use the vesa driver and go from there. However, a number of decisions in Lucid Lynx have made troubleshooting practically impossible.1 - No grub menu. No way for me to pick a safe boot option.2 - Install CD doesn't come with any rescue boot options.3 - Ctrl-Alt-Backspace to kill the X server and Ctrl-Alt-F1 to boot into a shell don't work.4 - the default filesystem is ext4, which means my old rescue CDs aren't likely to be of much help.Sigh. I understand that Ubuntu is trying to make things look pretty and all, but these user-friendly changes are making it near impossible to fix a problem like the one I have. I just downloaded a System Rescue Linux CD but it's kind of late to be trying it out now.
View 3 Replies
View Related
Apr 21, 2011
I'm trying to install 10.04 Server on an old Dell Poweredge 600SC I had lying around, and I'm having an issue with the installation. I can boot from the disk without any issues, I select a language for the installer, and I get to the main menu (Install Ubuntu Server, Check Disk for defects, Test Memory, etc). When I select Install Ubuntu Server, it waits a couple of seconds and then goes straight to a blank screen. No flashing cursor or anything.
I've tried some digging on the issue and another thread from a while back said to add "vga=771" to the installer line and when I did that, I got an error from my monitor itself complaining about an incompatible video mode.I know I'm not the only one who has had this issue, I just don't know how to address it. This is the first problem I've ever had on an installation.
View 2 Replies
View Related
Apr 26, 2011
I downloaded Ubuntu Lucid...something onto a cd and I booted into it on my iMac G4. It brought me to a screen saying things like live is default press tab for more options etc and when I just press enter, the screen turns white, loads a few things, then it turns blank and after awhile, I hear the Ubuntu startup sound but my screen remains blank.
View 2 Replies
View Related
Jun 14, 2010
I've downloaded 10.04 desktop (twice) and server (once). The server install will boot fine, but the desktop install goes to a blank screen (and the monitor goes to sleep) after leaving the Live CD menu (Run from CD, Install, Check Files, Boot 1st HD, etc.).My first try at downloading the desktop CD was using BitTorrent, and appeared to go OK. Burned the .iso image, booted, and when I got the blank screen I suspected the Intel D101GGC motherboard using the Radeon Xpress 200 chipset had problemsI tried adding boot options (F6) such as vga=711 and xforcevesa and text. No joyOthers seemed to have gotten a successful install so I turned may attention to the CD, suspecting it was a bad download/burn, and downloaded 10.04 desktop again from mirror.pnl.gov/releases/. The two .iso images compared equal, so I used a different CD burner, with different media and got CDs which compare identical. Both CDs fail. Then I downloaded the server CD from PNL and it ran! I could select the "test CD" function, which ran in a text mode and said the server CD was OK. I started the install, and it went OK.
View 1 Replies
View Related
Feb 15, 2011
I been trying to change the splash screen, boot screen thing and now when it boots it just goes right to the log-in screen. I installed "startupmanager" but every .so file I try to add, just won't get added for some reason.
View 3 Replies
View Related
May 4, 2010
Lucid is not in testing but it's released.It seems it works now, with all desktop effects activated and switching users and closing sessions.The only thing I still don't know is which screensaver can I use if removing gnome-screensaver?
View 1 Replies
View Related
Feb 22, 2010
My friend was showing me how to change the splash screen and used a app called start up manager (SUM).He changed the resolutions for GRUB and something else. The GRUB screen resolutions has changed fine but after that I get a line of text which I cant read as its too quick.
View 6 Replies
View Related
Jul 19, 2010
So I turned off my computer the other day (I leave my laptop on, pretty much 24/7 I only turn it off if I have to, or I forget to plug it in I turned it off this time just because it was feeling warm)...
And when I went to turn it back on, the splash screen was big and ugly looking, then the orange ("loading") dots loaded to the end... but then it just stopped.
My computer wouldn't boot up... so then I used one of the older versions (you know grub lets you select versions before upgrades or whatever)... and the boot splash was the nice small version... and it loaded just fine, but then after the splash screen went away... the monitor just stayed black... same thing with the version before that.
So then I tried recovery mode on the first one (the latest), and when I clicked "boot normally" it took me to shell. However, everything was working fine, I could load up my non-x dependent programs like IRSSI just fine.
I think it has something to do with me installing the ATI proprietary driver (which was stupid of me, Ubuntu was handling my graphics card perfectly without it... and I hate using closed sourced software).
View 3 Replies
View Related
Jan 14, 2011
I fixed this issue on 10.04, but just recently (1 hour ago) upgraded to 10.10 and am having the same issue. Machine boots fine, but the screen is blank for most of the boot, and plymouth is up for about a half second before I get to the login screen.I've tried searching the threads, but for the life of me I can't find the solution and can't remember what I did to fix it on Lucid.
View 4 Replies
View Related
Jan 11, 2010
I don't know what caused it, but as I boot into Ubuntu (9.10), the login screen never appears. Boot splash shows,then the cursor shows up but never the login screen. I haven't found anything that will reset the default gdm or login screen that works.
View 2 Replies
View Related
