Ubuntu :: Lucid - Ibus Still Not Working - How To Make It Work
May 5, 2010
I installed Kubuntu 10.04 and wanted to try if, finally, ibus works. I installed ibus and ibus-anthy from repository (I need the japanese input), then I launched Ibus preferences from the menu, set it, and the icon appears in the kickbar.But nothing happens if I press ctrl-space. Same problem there was on 9.10.I also added the lines to the home/.bashrc as the popup says.
export GTK_IM_MODULE=ibus
export XMODIFIERS=@im=ibus
export QT_IM_MODULE=ibus
View 9 Replies
ADVERTISEMENT
Mar 6, 2010
upgrading to9.10 I suddenly was unable use SCIM to switch language input methods.After searching around, I discovered that with Ubuntu 9.10 Ibus was being used in place of SCIM. That's all fine and good, but I can't get Ibus to work. Specifically, when I open the Ibus settings pane and add my desired languages, the settings aren't saved when I exit.So I tried switching back to SCIM. I changed my bashrc settings and set the keyboard input in language settings back to SCIM. No nice.Honestly, I just want to be able to swich language input methods--I don't care if I use SCIM or Ibus.
View 2 Replies
View Related
Jan 20, 2011
I used to input Chinese with scim input method, which can be trigered by Ctrl^Space. But this time, I reinstalled ubuntu 10.04, I have to manually start up ibus from System>Preference>ibus firstly before I can triger the input method by Ctrl^Space.
This is not over, the key problem is there are several dialogues to click "ok" with before I can really use the scim.
How can I make this ibus startup automatically and quitely?
I tried put command "ibus -setup" into my .profile, it does start up the ibus automatically every time when I login, but the dialogues still bothering me.
View 1 Replies
View Related
Jul 10, 2010
This is how i made my Genius G-Pen F610 Tablet on Ubuntu 10.04 Lucid Lynx. Everything works but the buttons the sides of the tablet, the buttons of the pen(stylus) work as well. First I was looking at these websites, as a reference: [URL] So, let's begin our journey:
1. Add this ppa: ppa:doctormo/xorg-wizardpen (I've went to System-Administration-Software Sources-Other Software-Add and copy-pasted this at the APT line: ppa:doctormo/xorg-wizardpen )
2. Install xserver-xorg-input-wizardpen (I went to System-Administration-Synaptic Package Manager and typed wizardpen (on the QuickSearch bar) It showed me that there is a packet called xserver-xorg-input-wizardpen, I have right-clicked and check Mark for Installation, and then went to Apply button.)
3. Run cat /proc/bus/input/devices in the terminal (I openned Applications-Accessories-Terminal and there I pasted (by that I mean pressing Middle-mouse button this way you can easely paste) this code: cat /proc/bus/input/devices)Now it will show all the devices on your computer, so you need to find the event for your tablet. My F610 tablet is recognised by Ubuntu like this:
[Code].....
View 9 Replies
View Related
Mar 2, 2011
I type Chinese using ibus, but it dosen't seem to work at all with skype, is there anything I can do to get it working? Ibus isen't working for me in libre office either.
View 9 Replies
View Related
Nov 13, 2015
I am running Debian 8.2 (Jessie) with KDE 4.14.2. I use ibus to enter CJK characters. ibus is setup "the manual way" from URL....
Code: Select allexport GTK_IM_MODULE=ibus
export XMODIFIERS=@im=ibus
export QT_IM_MODULE=ibus
CJK input via ibus works for Qt4 applications such as Kate and Kwrite.However, CJK input via ibus does not work automatically with Qt5 applications, such as sqlitebrowser. I can get ibus running with Qt5 applications if I launch the application from the console like this:
Code: Select allQT_IM_MODULE=ibus sqlitebrowser
Is there way I can get ibus working with Qt5 applications automically without needing to add "QT_IM_MODULE=ibus" all the time?
View 0 Replies
View Related
Mar 7, 2010
The magic key Ctrl+Space doesnt always work with SCIM. Too tired with SCIM, I decided to remove it and install ibus, ibus-qt, ibus-unikey (for typing Vietnamese).
Then, I start it with:
Code:
Then I try press Ctrl+Space to trigger but it doesnt work, even it quits itself sometimes.
The hotkey problem also occurs with KNotes. I have set Global Shortcut for some functions such as New Note, Show All Notes. And it works only once in that session. If restart machine, those shortcut is useless.
My system is Slackware 13.0 with KDE.
View 5 Replies
View Related
May 2, 2011
how to get IBus input methods to work in Adobe Flash Player? I want to type foreign characters in SharedTalk, a language exchange website which unfortunately runs entirely on Flash, but pressing ctrl-space to activate IBus does nothing and I can only type in Latin characters.
Or if it's possible by using something other than ibus, I'd also be interested.
I did a search but I can only find threads like [URL]this which refer to older Flash versions and claim that it's fixed now.
View 1 Replies
View Related
Dec 14, 2010
I've just installed Kubuntu 10.10 a couple of days a go. I've installed IBUS-UNIKEY and it works perfectly with Kopete and other applications. But I can not "activate" Ibus when working with OpenOffice Word. KDEIbus doesn't work with other GTK+ Applications.
View 3 Replies
View Related
Feb 27, 2011
dvd playback not working - how to make it work
View 2 Replies
View Related
Feb 9, 2010
I am using ubuntu since Intrepid Ibex. Since then I have learnt a lot and just recently setup my own home/web server. I am running my LAMP server on Karmic. I have been slowly transferring my website from my current hosting company to my server. Got everything working except the PHP mail() function is not working. I do not get any error messages but the mail does not reach. /etc/log/mail.log is blank.
I basically clueless about where to start. I did not install a mail server. Is this the reason? Should I check something in phpinfo() or the php.conf? I do not have sendmail/postfix installed.
View 2 Replies
View Related
Nov 27, 2010
I am slowly rebuilding my network after a HDD crash that took out my primary development box. I installed Lucid Lynx and have things (mostly) working. The issue I am having has to do with file completion and history. I could set filec in my .cshrc file and it would work as it usually does (hit <TAB? key after typing in a couple of letters of a file name and BOOM the file auto-completes). For some reason, when I do the same thing, I get a literal TAB entered on the line. Also, if I attmept to utilize history (either the up-arrow from the keyboard I see ^[ instead of the last executed command(s).
View 2 Replies
View Related
Jan 8, 2011
I've downloaded all the drivers and have an ethernet connection working however as I have an INSPIRON 1545, the network card is shoddy for LInux and I can't get the wireless working AT ALL.
lshw -C network
*-network
description: Network controller
product: BCM4312 802.11b/g LP-PHY
vendor: Broadcom Corporation
[code]...
View 3 Replies
View Related
Jan 26, 2011
I've installed Lubuntu on a Packard Bell EasyNote W3344 D. lsusb displays the usb pen, however it's not automounted. All three options under pcmanfm --> Preferences -- Volume Managment is ticked. I've tried two different usb pens, both formatted fat32 and confirmed working on ordinary Ubuntu. I should add that I previously installed Mint Fluxbox, but eventually reinstalled (choosing Lubuntu) because I wasn't able to enable auto mount of usb pen. Both /mnt and /media remains empty after insertion of the usb pen. Auto mount of optical drive is working properly.
View 3 Replies
View Related
Apr 13, 2010
This morning my program central stopped working and i don't know what might have caused it or how to fix it.
the problem is the download button, it doesnt seem to appear anymore as shown below:
[URL]
I got Ubuntu 9.10 64bit running GNOME
View 1 Replies
View Related
May 30, 2010
My wired network is not working! This is the result of ifconfig -a:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:25:3e:fe:50
inet6 addr: fe80::21c:25ff:fe3e:fe50/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
View 8 Replies
View Related
Apr 26, 2011
I've been running Ubuntu on my Dell Studio 1749 laptop since I got it, around 8 months ago.I recently upgraded to Maverick 10.10 64-bit, reformatting and partitioning my hard drive in the process (got rid of windows since I never use it) and it was working perfectly until last Wednesday (22.4.2011). On Wednesday I unplugged my usb headset while in a Skype call to switch to the internal speakers and my computer freaked out, black-screened, and froze. When I rebooted, the internal speakers had stopped working completely, even though the sound works perfectly on both sets of headphones I have.
I've tried most of the fixes that have been presented in other threads and none of them are working, including rebooting the laptop with the headset in. I've tried that with both of my usb headsets, even though I don�t like using the one that it froze on for the exact reason that any time I have audio playing with that headset and it gets unplugged, it black-screens and freezes my laptop. Actually audio doesn�t even have to be playing, sometimes unplugging it even with nothing playing still freezes my laptop. It does it once in a while with my other usb headset, as well, but not every time or anything close to that often.One thread suggested that modifying /etc/modprobe.d/alsa-base.conf by appending the following line to the file would work:
Code:
options snd-hda-intel model=dell-m6
But that did nothing at all. Someone else said that they saved a copy of alsa-base.conf and replaced the whole thing with that line, so I did that, with no change. Then I purged alsamixer using
Code:
sudo apt-get purge alsa-base
and
Code:
sudo apt-get purge alsa-utils
Then I rebooted, and reinstalled them, which did not fix the issue. However, it did replace the alsa-base.conf file that I modified which shows me that it actually did purge it. (I was an idiot the first time I tried to purge it and only purged and reinstalled alsa-utils..xD So the file did not get replaced, which was when I realised my mistake) I have NOT modified the new file, although I did copy the contents to a text file in case I need to try that fix again.I should also mention that the speakers do work when first booting up Ubuntu to the log-in screen, both with and without headphones I ran the alsamixer diagnostic at the beginning of all this, here's the link: [URL] And then ran it again after purging and reinstalling alsamixer, here's the new link: [URL] I have tried messing with the settings, disabling the headset, setting the input and output manually to internal speakers while the headset is still plugged in, making sure with GNOME alsa-mixer that the speakers are not muted, rebooting with the headsets in and then unplugging them.
View 1 Replies
View Related
Mar 9, 2010
Whenever I am starting Tomcat5 service in RHEL5 it is showing that it is starting but after some time (after 5 sec.) the status it is showing that lock file found but there is no such process for PID * (where * = different PID no.) and tomcat is not working.
View 2 Replies
View Related
Apr 8, 2010
I have ubuntu 9.10 and my wireless connection has been working perfectly until a few weeks ago when I updated my laptop. I can connect to the internet using my wired cable but not by wireless. There is nothing listed under my wireless list. I am new to this and have been unsuccessful in getting my wireless connection going again. I don't even know were to begin. I have a 2wire modem also.
View 2 Replies
View Related
Mar 10, 2011
There seems to be something that has changed in the newest stable Debian - I chose kde4 as my default desktop at installation, and it worked fine. Then I went and changed some options in both /var/run/kdm/kdmrc and /etc/kde4/kdm/kdmrc, something I have done many times before without problems.
However, when I tried to restart kdm with /etc/init.d/kdm, things didn't come up - no X, no kdm. When I rebooted the machine everything seemed fine, so I thought the problem was solved; but this morning I wanted to change something else - I don't want kdm to remember the last user, and I don't want to see a list of users either. Now dkm and X fail even when I reboot; I also find that /var/run/kdm/kdmrc has disappeared - I am certain I didn't remove it.
The strange thing, when I try /etc/init.d/kdm, I can kdm hanging around all alone in the process list, but no X or greeter. So what is going on - what should I have done instead? And can I repair it? I can of course reinstall the system, but I hate to think that we can't manage better in Linux.
View 4 Replies
View Related
Feb 17, 2010
My wireless adapter stopped working randomly the other day. I think the last time it was working was right before I put the computer into hibernate for the first time. it stopped working even after restarting.modinfo p54usb shows (I'm leaving out information that seems irrelevant because I can't copy and paste without the internet, so I'm typing what I see from another computer)
firmware: isl3887usb
firmware: isl3886usb
dmesg | grep firmware doesn't seem to show any requests for firmware related to it. lsusb shows something like
bus 002 device 001: ID... linux foundation 1.1 root hub
bus 001 device 003: id... linksys wusb54g wireless adapter
[code]....
When I start up, in boot messages I get something like this
WARNING deprecated config file /etc/modprobe.conf, all config files belong into /etc/modprobe.d/.
WARNING all config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release
Device wlan0 does not seem to be present, delaying initializtion [FAILED]
View 14 Replies
View Related
Jan 27, 2010
I cannot right click with my mouse on the gnome applications menu to get the properties/edit menu option. This is on F12 on 64bit.
Instead I get: "help, remove from panel, lock panel". I dont have this problem with anything else on the top bar.
---------- Post added at 12:33 PM CST ---------- Previous post was at 12:21 PM CST ----------
Turns out I have to install package alacarte and then go to System > Preferences > Main Menu
View 1 Replies
View Related
Mar 20, 2010
I am running a quad core centos 5.4 box that is having a strange problem with dovecot. The administration panel is able to send emails through dovecot but not any of the user accounts (ie with webmail). I've done a bit of research with what could be wrong but haven't had any luck so far I am also having a weird problem with apache: on a c++/php bittorrent application I was going to be running on a subdomain of my main site I get a 500 error every time I try to log in. The only way to get rid of the 500 error is to clear the chache (so its horribly broken somehow). The error generated in the log whenever I try to log in is that "ffmpeg is already loaded" (which I am running on the main site and is critical). Is there a way of either repairing my apache install or excluding ffmpeg on the subdomain in the conf or something?
View 2 Replies
View Related
Dec 2, 2009
I install ibus through "yum install ibus *"and i can't it through call "ctrl +space" why?i use fedora 10.
View 1 Replies
View Related
May 29, 2010
I can't get Thai language input to work.
In "language support" I installed Thai, but it remains grayed out.
In "ibus preferences / input method", no languages are shown.
I added:
I added: "ibus-daemon --xim" to startup applications. No effect.
View 1 Replies
View Related
Feb 17, 2011
how to make creative web cam working with ubuntu
View 1 Replies
View Related
Apr 8, 2011
I can't get flash controls to work. If the video auto-plays, it starts just fine, if not, I'm out of luck. I've tried reinstalling flash through the software center. Even if it autoplays, I can't control volume or pause or anything. I'm at the mercy of whatever is already there.
Ubuntu Karmic 9.10 - all updated as of 1/2/2009
Firefox 3.5.6
On a Lenovo Thinkpad R400
View 3 Replies
View Related
Jul 10, 2010
I have used automated DVD-RAM-discs for backup at work a lot and I think they are perfect for that task.
At home I'm using Ubuntu Lucid exclusively and I haven't been able yet to use DVD-Ram media in any userfriendly fashion yet. The only documentaion I found seems to be very much out of date.
View 1 Replies
View Related
Jul 29, 2010
I'm having trouble getting compiz to work on my Laptop. It worked for a while and then I turned on Shift Switcher and a message popped up saying..."The new value for the button binding for the action Terminate in plugin Shift Switcher conflicts with the action Zoom Window of the Scale Addons plugin. Do you wish to disable Zoom Window in the Scale Addons plugin?" I was given the option of Set Terminate anyway, Don't set Terminate, and Disable Zoom Window. I clicked Don't set Terminate and ever since the only thing that works in compiz are the bindings in the general options. I've used synaptic to completely remove and then reinstall compiz but the problem persist. Something else weird, all of the changes I made are still there, even after complete removal, but they don't work?
View 2 Replies
View Related
Oct 29, 2010
When I try to hibernate, the computer just goes to a blank, black screen and doesn't turn off. I have to hold the power button to get it to shut down, and when I turn it back on none of the programs running before hibernation have been saved.
View 8 Replies
View Related
